I am having a problem with mms on Dream/G1. I am currently running the following CyanogenMod 5.0.8-DS on my phone. My APN settings are:
APN sp.telus.com
Proxy 74.49.0.18
Port 80
Username not set
Password not set
Server not set
MMSC http://aliasredirect.net/proxy/mmsc
MMS proxy 74.49.0.18
Port 80
MCC 302
MNC 220
APN type default, mms
I have tried turning off wifi & GPS and still can't download a pic that was sent from Telus as a test. I am puzzled because internet and phone functions work ok so any help will be appreciated.
Telus Mobility LTE APN Settings are as Follows (if you flashed a rom and cannot get data check your apn settings to see if they correspond)
NAME : TELUS SP
APN : SP.TELUS.COM
PROXY : NOT SET
PORT : NOT SET
USERNAME: NOT SET
PASSWORD : NOT SET
SERVER : NOT SET
MMSC : HTTP://ALIASREDIRECT.NET/PROXY/MMSC
MMS PROXY: 74.49.0.18
MMS PORT: 80
MCC: 302
MNC: 220
AUTHENTICATION TYPE: NONE
APN TYPE : DEFAULT, MMS
APN PROTOCOL : IPV4
ENABLE/DISABLE APN: APN ENABLED (CHECKED)
BEARER: UNSPECIFIED
NAME: TELUS ISP
APN: ISP.TELUS.COM
PROXY NOT SET
PORT NOT SET
USERNAME NOT SET
PASSWORD NTO SET
SERVER NOT SET
MMSC NOT SET
MMS PROXY NOT SET
MMS PORT NOT SET
MCC 302
MNC 220
AUTHENTICATION TYPE NONE
APN TYPE DUN
APN PROTOCOL IPV4
ENABLE/DISABLE APN APN ENABLED (CHECKED)
BEARER UNSPECIFIED
yeahitsgotahemii said:
NAME : TELUS SP
APN : SP.TELUS.COM
.
:
APN TYPE : DEFAULT, MMS, SUPL
Click to expand...
Click to collapse
Don't know if it makes any difference but my stock APN settings include "supl" in the TELUS SP APN Type field.
Case sensitivity also, especially for APN field (should be all lower-case)!
I have an unlocked Sprint Note 5 on cricket which is AT&T. Everything is working but I am unable to get 4G to connect. Is there any fix for this? I am currently rooted and running the MOAR Nougatized QC5 ROM. Thanks for the help.
1. Make sure you set APN for carrier you are on (below is ATT. Not sure about Crickett)
Name ATT Phone
APN phone
Proxy Not set
Port Not set
Username Not set
Password Not set
Server Not set
MMSC http://mmsc.mobile.att.net
MMS proxy proxy.mobile.att.net
MMS port 80
MCC 310
MNC 410
Authentication Type None
APN type default,mms,supl,hipri
APN protocol IPv4
Bearer Unspecified
2. Call carrier and have them add your IMEI to system.
I recently changed carriers and had to update my APN settings. The APN settings requires me to change the MNC to 410 but when I do this and save the APN settings it instantly deletes the entire setting.
Attempting to use this apn setting.
(Edited out links due to new user)
Code:
Name : Straight Talk
APN : tfdata
Proxy : proxy(dot)mvno(dot)tracfone(dot)com
Port: : 80
MMSC : http : // mms-tf(dot)net
MMS Proxy : mms3(dot)tracfone(dot)com
MMS Port : 80
MCC : 310
MNC: 410
APN Type : default,mms,supl
I have tried altering every single other field and it saves just fine until I try to edit the MNC from 260 (or blank when creating a new APN) to 410 and attempt to save.
Using the latest default MIUI updates.
I'm having this same issue currently. Did you ever get this resolved?
OKAY. So. The problem, in fact, had nothing to do with SIMlocking. It was trying to use a preinstalled T-mobile APN instead of the Ting APN.
One might think this would be the end of the problems, but it was not. I went in and manually selected the Ting APN. At this point I'm getting a normal LTE data indicator, and mobile data and SMS work, but phone calls still aren't. There are two separate Ting APNs, one for data and one for MMS. The one for MMS looked correct, but the one for data was missing information. Ting was supposed to send an automatic update to the phone to fix this, but although I was sent the message saying that they were sending it, it was not actually sent. So I went in to manually edit the APN according to these instructions:
APN settings for an X1 SIM cardNameTing DataAPNwholesaleMMSC
http://wholesale.mmsmvno.com/mms/wapenc
APN type*default,admin,fota,mms,supl,hipri,internet,dunMCC310MNC260APN protocolIPv4 / IPv6APN roaming protocolIPv4 / IPv6
Except I can't edit the Ting data profile. I can edit the SMS profile (though I don't want to, because it's not broken), and I can create a new profile, but I can't edit this one. So I think, okay, I'll make a new one and switch to that one. When I try to save it, it says my carrier doesn't allow profiles with the dun type, which is odd given it's in the default but I don't see why I'd actually need dial-up networking anyway, so I take that one out and save. It saves. I switch to that one. It switches.
I still cannot make calls.
Does anyone know why editing the data APN profile is locked, and how I can unlock it? Has anyone else had issues getting their carrier recognized by the new 19.1 LineageOS? What can I do to try to fix this? As much as I love the idea of never getting an actual phone call again, they are occasionally necessary.
_________________________________________________________________________________________________________________________________________
ORIGINAL TITLE AND POST:
H830 relocking (? maybe something else?) sim when LineageOS 19.1 is installed. Is there a fix?
I know there are already a million threads about trying to unlock H830s without access to the official app/with an ineligible phone/with a bad IMEI, etc. I have access to the official app and my IMEI clears just fine with my phone service provider. I'm... not hopeful, but given it is a different situation I thought it wouldn't hurt to ask.
Bought a phone sold as unlocked, then went through a convoluted process mostly following this guide (see my notes at the end) to get the bootloader unlocked and get Lineage 19.1 on there. At the stage with 15.1 unofficial lineage, it recognized my Ting sim card but seemed a little buggy, with fluctuating, mostly poor signal (as, honestly, one might expect from an early unofficial build). I didn't stay there long enough to investigate much further, but will do so later. At the stage with 19.1, it was locked to T-mobile again, though it also seemed to think my sim card was a T-mobile card, and allowed MMS but not calls. Knocked it back to stock 20A and used the app to "permanently" unlock it, which went without a hitch. Repeated the process, same result.
Is there any way to get this phone properly unlocked?
EDIT: The more I poke at this, the more I think the device really is unlocked properly now and something else weird is going on here. If it was just locked, my Ting SIM card shouldn't work at all and I should get some kind of alert about it, right? Instead the phone's listing T-mobile as my carrier and letting me send SMS, but not phone calls. Ting registers its existence as well, and I get signal on the signal indicator, just with a little "something is wrong" type exclamation point on it.
Here's some APN settings I found by setting my phone back on stock 20A (again) and going through the whole process of getting Lineage 19.1 on there (again).
From stock LG G5 on 20A
WAP service prompt successful
calls working, texts working
not set unless specified
Name: T-mobile LTE
APN: fast.t-mobile.com
MCC: 310
MNC: 260
APN type: default, xcap
APN protocol: IPv6
APN roaming protocol: IPv4
Name: Ting (primary)
APN: wholesale
MMSC: http://wholesale.mmsmvno.com/mms/wapenc
MCC: 310
MNC: 260
Authentication type: PAP
APN type: default, mms
APN protocol: IPv4
APN roaming protocol: IPv4
Name: EPDG MMS/XCAP
APN: tmus
MCC: 310
MNC: 260
Authentication type: PAP
APN type: xcap
APN protocol: IPv6
APN roaming protocol: IPv6
From stock LG G5, after recowvery exploit, TWRP, root
(no WAP service prompt, probably because I forgot to swap the card back and forth between another phone this time. Will try that and report back.)
calls working, texts working
not set unless specified
Name: T-mobile LTE (primary)
APN: fast.t-mobile.com
MMSC: http://mms.msg.eng.t-mobile.com/mms/wapenc
MCC: 310
MNC: 260
APN type: default,supl,mms,xcap
APN protocol: IPv6
APN roaming protocol: IPv4
Name: EPDG MMS/XCAP
APN: tmus
MMSC: http://mms.msg.eng.t-mobile.com/mms/wapenc
MCC: 310
MNC: 260
APN type: mms,xcap
APN protocol: IPv6
APN roaming protocol: IPv6
from Lineage 15.1 unofficial
no WAP service prompt after swapping card back and forth
calls not working, texts working
Not set unless specified
too many to go through in detail, presumably preloaded to work with many different carriers. will go through primary and Ting, and list any others enabled
Name: T-Mobile US LTE (primary)
APN: fast.t-mobile.com
MMSC: http://mms.msg.eng.t-mobile.com/mms/wapenc
MCC: 310
MNC: 260
APN type:default,supl,mms,ia
APN protocol: IPv6
APN roaming protocol:IPv4/IPv6
Name: Ting Data
APN: wholesale
MCC: 310
MNC: 260
APN type: default,admin,fota,mms,supl,hipri,internet,dun
APN protocol: IPv6
APN roaming protocol: IPv6
Brightspot, multibrand
CellOne WAP, wap.cellular1.net
GIV Mobile, wholesale
GoSmart, multibrand
I-Wireless, i2-wireless.com
Net10, wap.tracfone
PTel, wholesale
Red Pocket, wholesale
Simple, simple
Solavei, solavei
StraightTalk T-Mobile, wap.tracfone
T-Mobile IMS, ims
Telcel America, wap.tracfone
Tracfone. wap.tracfone
US Mobile, pwg
Walmart Family Mobile, web.omwtoday.com
LineageOS 19.1 official
no WAP service prompt after swapping card back and forth (do get text saying update will be sent to phone, but that's it)
calls not working, texts working
Not set unless specified
Name: Ting Data
APN: wholesale
MCC: 310
MNC: 260
APN type: default,admin,fota,mms,supl,hipri,internet,dun
APN protocol:IPv6
APN roaming protocol:IPv6
MNVO type: GID
MVNO value: 6135
Name: Ting MMS
APN: wholesale
MMSC: http://wholesale.mmsmvno.com/mms/wapenc
MCC: 310
MNC: 260
APN type: mms
APN protocol: IPv4
APN roaming protocol: IPv4
MVNO type: GID
MVNO value: 6135