Hello, I need help on fixing my Samsung Infuse 4G.
I was trying to install a different ROM from my computer onto my phone and when i did. It just got stuck on the samsung logo. Also when i put it in download mode and connect it to my computer it doesn't appear on Odin. Also my computer doesn't regonize my phone it just says unknown device. Can someone help me please? I want my phone to be back to stock so i can reinstall everything else back to normal. Thanks.
I think that u should try searching. This has been answered more times then can be counted.
sent from outer space.
thanks i fixed my problem already.
Related
Hi guys...I have a rather atypical (to this forum anyways) question. How do I go about reflashing the firmware on a Samsung Gusto?
The reason for doing this is because the phone somehow went into download mode by itself. I'm not sure how that happened but it did and now when ever I try to turn it on it does nothing. The only way to get a sign of life out of it is by plugging it in and then it shows the verizon screen at which point it does nothing else.
Any help will be greatly appreciated! Thanks!
There is no available drivers for this specific phone. No way to connect to PC as fas as I know.
Hello, I recently decided to root my phone and place Cyanogenmod on it. When I did that I realized my radio was no longer working. In an attempt to just get back to a working phone for the time being I flashed a rom that I believe was just for the Nexus S and not Nexus S 4G. Due to my stupidity I am unable to communicate from the device to my computer using USB. When I attach the device to the computer nothing happens. The device does not even appear in the device manager. I have tried on multiple computers as well. On top of that the rom seems to have put me back into the stock recovery. If anyone could help me figure out just how to get USB working again I would be very appreciative.
I should note that I can still transfer files to the phone using the sd card or via ftp.
Thank you for your time and help.
Change the USB cable?
Yes, forgot to mention that. I have tried 2 cables both of which work on other devices.
What if you hold in the middle of the volume buttons (i.e. both up and down at the same time) and keep holding, then plug in to your usb port? It should come up as download mode. If it will do that you might try using Odin.
Or try a different machine perhaps?
are the drivers the same for the S as the 4g?
do you have clockwork on the phone or have you tried to run recover by holding volume up and power?
just throwing things out.
Hello, I appreciate any and all suggestions and help.
I have Odin downloaded and installed, but the computer can not find the device so Odin can not do what it needs to do. This is even the case in download mode.
In terms of recovery I am on the stock recovery. I was on clockwork but made a small mistake and now am back to stock.
I know if I can just get the computer to see the phone exists I can fix it.
If you can find the full OTA package for NS4G, you can try putting it on the SD card and flash it via stock recovery.
Also another thing worth trying is connecting the phone to an Ubuntu machine and see if it's detected or not.
I have tried looking for the original full OS. I will continue looking, but the different OS thing is a good idea I did not think of. I will attempt that now. Thank you.
I installed Ubuntu and the Android SDK and Ubuntu was unable to see the phone as well. I am going to keep searching for the original firmware to see if that will fix it. Thank you for your help so far, it is greatly appreciated.
I have found the only rom my phone will accept now is
Android 2.3.4/GRJ22/KRKC1 Radio/KA3 Bootloader
Which is for the M200 variant. This apparently the Korean version.
So today, I tried to install TWRP onto a standard, 4.0.4 Samsung Stellar. Followed the instructions, went through Odin, and it failed with auth errors. Well, crap. Reboot the phone, get into there, and try to use GooManager to do it for me. I let it do the standard OpenBootloader or whatever, didn't work. So then I tried EZ-Unlocker. Unlocked just fine, until I turned off the phone. Try booting it, nothing happens; no vibration, no sound, no screen, nothing. I thought this was a dead battery (The battery was running at literally, 3% after I used EZ-Unlocker), so I plugged it in. No red light. Take out the battery, slap it back in. Same result, nothing happens to the phone. Well, crap. Try holding the power button again, nothing happens. Connect it to my computer and it reads it as some QUSB or whatever; look that up, download and installed a driver file for Qualcomm, and now Odin3Execution recognizes it, but Odin 3.07 doesn't. However, I still cannot use Odin to try flashing a new ROM onto it or anything because I cannot get into Odin mode. I was thinking of buying a USB jig to get it into Odin, but I want to confirm with someone else that this is a full hard-brick and not me being stupid.
tl;dr: Stellar doesn't boot at all; power button unresponsive, cannot get into recovery or download/odin mode; computer recognized it as QHSUSB_DLOAD, installed drivers to get it to be recognized as a Qualcomm HS-USB QDLoader 9008 at COM7. Very similar to http://forum.xda-developers.com/showthread.php?t=822939 but just a different phone.
edit: I found this: http://rootzwiki.com/topic/109153-howto-unbrick-a-bootloader-bricked-stellar/ but the download link times out. I'm willing to try this since it may solve the problem. Does anyone know where I can find a mirror of the download link?
edit2: I just sent a PM to invisiblek here on XDA.
edit3: And thanks to invisiblek, I managed to get it into download mode! Solved; if you want the stella-unbrick file, shoot me a PM and I'll upload it somewhere.
I an also looking for solution and need your help.
Sent from my SCH-R830 using XDA Free mobile app
Sch-i200 bricked download page required
hello
could you give the download link where I can find bricked soln. as such I bricked my stellar and I want to use it in India so I want to unlock it too.
Kindly help and hope to get back from you soon
Hope this is the right place to be asking this question
First timer so pls excuse if i miss out anything.
I was doing an ota firmware update to my t mobile Samsung note 2 (SGH-T889) using kies 3.1. My phone was stuck on 41 percent for about an hour so i disconnected the phone thinking that it will reboot and ask me to reconnect. Well since it didnt, its been stuck on this firmware encounter an issue please selcet recovery mode in kies and try again.
I hooked it back up and now in kies it just says connecting but nothing happens.
i tried putting my phone in download mode to see if itll connect to kies and still nothing. The phone wont allow me to get into recovery mode due to this issue. Im a mac user so i even downloaded wine to use odin i downloaded all samsung drivers needed for a connection and odin cant even detect my phone. Im not sure if usb debugging is on in my phone . I cant access nothing on my phone i tried many tricks on youtube looked at xda forms i even went into tmobile and they didnt kno what to do. Im using the factory usb, i tried diff ports and just cant seem to get a good connectiong between either programs. Please helps its been 3 days without a phone..thank you
Hi,
I see you've already asked about this in the appropriate section for your device.
http://forum.xda-developers.com/note-2-tmobile/help/note-2-stuck-firmware-encounter-issue-t3217172
That's awesome! :good:
As XDA Assist is here to help navigate the site, not for support... I'll close this thread since you already found your way.
Good luck!
I have a massive problem, after days of research i have found NOTHING..
Ok so i had a rooted samsung galaxy s6, i was getting a bit tired of having it rooted (didnt really serve any purpose) so i decided to unroot via the superSU app then i restarted my phone and it hasn't been able to turn back on ever since.. it'll show the logo over and over again when i try to turn it on. I tried wiping the cache partition, wiping the data, rebooting it every single way possible, no luck..
So i decided i had to flash the Rom using the latest version of Odin but the problem with that is that now my phone isn't getting recognized by my computer i have tried installing the proper drivers, changing usb cables, ports, computers.. I even tried installing samsung smart switch and kies but nothing works.
If anyone knows how to solve this problem please help.
buckfuddy0758 said:
I have a massive problem, after days of research i have found NOTHING..
Ok so i had a rooted samsung galaxy s6, i was getting a bit tired of having it rooted (didnt really serve any purpose) so i decided to unroot via the superSU app then i restarted my phone and it hasn't been able to turn back on ever since.. it'll show the logo over and over again when i try to turn it on. I tried wiping the cache partition, wiping the data, rebooting it every single way possible, no luck..
So i decided i had to flash the Rom using the latest version of Odin but the problem with that is that now my phone isn't getting recognized by my computer i have tried installing the proper drivers, changing usb cables, ports, computers.. I even tried installing samsung smart switch and kies but nothing works.
If anyone knows how to solve this problem please help.
Click to expand...
Click to collapse
Have you tried to get into download mode and run the emergency recovery feature via smartswitch?
I had the same issue with an old S6. The emergency recovery feature asks you the model and serial number of your device and immediately recovers it when you have a bad software restore.
Mr. Clown said:
Have you tried to get into download mode and run the emergency recovery feature via smartswitch?
I had the same issue with an old S6. The emergency recovery feature asks you the model and serial number of your device and immediately recovers it when you have a bad software restore.
Click to expand...
Click to collapse
Thank you for answering.
The thing is i would try that if i knew what my phones serial number was, do you know how i can find out? Keep in mind i cant turn my phone on..
buckfuddy0758 said:
Thank you for answering.
The thing is i would try that if i knew what my phones serial number was, do you know how i can find out? Keep in mind i cant turn my phone on..
Click to expand...
Click to collapse
If you can get to recovery mode, you should be able to get to download mode. Serial #s are easy to find with a simple google search. It will depend on what version of S6 you might have.