So today, I tried to install TWRP onto a standard, 4.0.4 Samsung Stellar. Followed the instructions, went through Odin, and it failed with auth errors. Well, crap. Reboot the phone, get into there, and try to use GooManager to do it for me. I let it do the standard OpenBootloader or whatever, didn't work. So then I tried EZ-Unlocker. Unlocked just fine, until I turned off the phone. Try booting it, nothing happens; no vibration, no sound, no screen, nothing. I thought this was a dead battery (The battery was running at literally, 3% after I used EZ-Unlocker), so I plugged it in. No red light. Take out the battery, slap it back in. Same result, nothing happens to the phone. Well, crap. Try holding the power button again, nothing happens. Connect it to my computer and it reads it as some QUSB or whatever; look that up, download and installed a driver file for Qualcomm, and now Odin3Execution recognizes it, but Odin 3.07 doesn't. However, I still cannot use Odin to try flashing a new ROM onto it or anything because I cannot get into Odin mode. I was thinking of buying a USB jig to get it into Odin, but I want to confirm with someone else that this is a full hard-brick and not me being stupid.
tl;dr: Stellar doesn't boot at all; power button unresponsive, cannot get into recovery or download/odin mode; computer recognized it as QHSUSB_DLOAD, installed drivers to get it to be recognized as a Qualcomm HS-USB QDLoader 9008 at COM7. Very similar to http://forum.xda-developers.com/showthread.php?t=822939 but just a different phone.
edit: I found this: http://rootzwiki.com/topic/109153-howto-unbrick-a-bootloader-bricked-stellar/ but the download link times out. I'm willing to try this since it may solve the problem. Does anyone know where I can find a mirror of the download link?
edit2: I just sent a PM to invisiblek here on XDA.
edit3: And thanks to invisiblek, I managed to get it into download mode! Solved; if you want the stella-unbrick file, shoot me a PM and I'll upload it somewhere.
I an also looking for solution and need your help.
Sent from my SCH-R830 using XDA Free mobile app
Sch-i200 bricked download page required
hello
could you give the download link where I can find bricked soln. as such I bricked my stellar and I want to use it in India so I want to unlock it too.
Kindly help and hope to get back from you soon
Related
Hello, I need help on fixing my Samsung Infuse 4G.
I was trying to install a different ROM from my computer onto my phone and when i did. It just got stuck on the samsung logo. Also when i put it in download mode and connect it to my computer it doesn't appear on Odin. Also my computer doesn't regonize my phone it just says unknown device. Can someone help me please? I want my phone to be back to stock so i can reinstall everything else back to normal. Thanks.
I think that u should try searching. This has been answered more times then can be counted.
sent from outer space.
thanks i fixed my problem already.
Hi,
my friend's Nexus S was stuck in a bootloop. i went into recovery mode and hard reset the phone, so that the phone would come back to stock. however, the phone was being reset when the battery of the phone came off, switching it off.
the phone fails to start. there is no response when i try charging it. Also, it does not go into DOWNLOAD mode or FASTBOOT, so i cant even run any utilities to flash the stock rom back. adb commands as well as the nexus toolkit show that there is no device connected.
can anybody suggest me what to do?? i was gonna try odin but i read somewhere that it is only useful for custom recoveries, not to flash stock roms.
i've gotten some usb drivers mentioned at some thread, saying i would have to update my 'android' device listed in the device manager using them, but i cant seem to find any device mentioned in my device manager either.
any suggestions as to what i should do??
Morphie said:
Hi,
my friend's Nexus S was stuck in a bootloop. i went into recovery mode and hard reset the phone, so that the phone would come back to stock. however, the phone was being reset when the battery of the phone came off, switching it off.
the phone fails to start. there is no response when i try charging it. Also, it does not go into DOWNLOAD mode or FASTBOOT, so i cant even run any utilities to flash the stock rom back. adb commands as well as the nexus toolkit show that there is no device connected.
can anybody suggest me what to do?? i was gonna try odin but i read somewhere that it is only useful for custom recoveries, not to flash stock roms.
i've gotten some usb drivers mentioned at some thread, saying i would have to update my 'android' device listed in the device manager using them, but i cant seem to find any device mentioned in my device manager either.
any suggestions as to what i should do??
Click to expand...
Click to collapse
Something like this happened to me a week ago. I have Nexus S 4G. So, I ordered USB Jig from usbjig.com and now I have download mode. It worked! :laugh:
You can buy USB Jig from that site, or build it yourself, or borrow it from someone.
hello,
I hope someone can help me with my AT&T LG Optimus Pro G phone, which I have royally screwed up.
I was experimenting with the cyogen mod and after installation I installed the freegee app and once the cwm recovery was installed, I decided to go into the recovery by holding down up volume and power button.
Once I was in recovery for CWM i couldn't exit out, and the phone constantly booted into recovery after every reboot, even if i took out the battery, and powered it on.
I tried reflashing the cynogen mod through the sd card, and even though I would get success message the phone would still reboot into the cwm recovery.
I started doing research on the internet and i found file exitrecovery.zip that could be used to possibly get the phone out of the cwm recovery.
After installing exitrecovery.zip, I rebooted the phone, and now I have complete black screen. There are no light, no hints the phone is even turning on, and I can't get into recovery( or at least I can't tell). The only thing now is that when i connect the phone to the computer the window tries to install drivers for the device, and eventually prompts to insert a CD for LG drivers. I already have LGUnitedMobileDriver v.3.10.1 connection drivers installed from their website.
Please help, I am really stuck here..... and have no clue what to do. I am fairly new with rooting and modding, and I am extremely miserable.
The phone is still under warranty from LG. Anyone if all else fails, and since the phone has no screen or lights, whether they would replace it?
Attaching the exitrecovery.zip that I used.
sobbing....
babaghanush said:
hello,
I hope someone can help me with my AT&T LG Optimus Pro G phone, which I have royally screwed up.
I was experimenting with the cyogen mod and after installation I installed the freegee app and once the cwm recovery was installed, I decided to go into the recovery by holding down up volume and power button.
Once I was in recovery for CWM i couldn't exit out, and the phone constantly booted into recovery after every reboot, even if i took out the battery, and powered it on.
I tried reflashing the cynogen mod through the sd card, and even though I would get success message the phone would still reboot into the cwm recovery.
I started doing research on the internet and i found file exitrecovery.zip that could be used to possibly get the phone out of the cwm recovery.
After installing exitrecovery.zip, I rebooted the phone, and now I have complete black screen. There are no light, no hints the phone is even turning on, and I can't get into recovery( or at least I can't tell). The only thing now is that when i connect the phone to the computer the window tries to install drivers for the device, and eventually prompts to insert a CD for LG drivers. I already have LGUnitedMobileDriver v.3.10.1 connection drivers installed from their website.
Please help, I am really stuck here..... and have no clue what to do. I am fairly new with rooting and modding, and I am extremely miserable.
The phone is still under warranty from LG. Anyone if all else fails, and since the phone has no screen or lights, whether they would replace it?
Attaching the exitrecovery.zip that I used.
sobbing....
Click to expand...
Click to collapse
Find flow ROM with expansion .exe and try it to sew from a computer.
could you further elaborate please
lykosha said:
Find flow ROM with expansion .exe and try it to sew from a computer.
Click to expand...
Click to collapse
hi, thanks for your reply. Again I very much new to the rooting and android OS tinkering, and nowhere close to an experienced user.
I tried to use google with your information in regards to how to use flow ROM with expansion.exe, but did not get any leads.
I would appreciate if you could elaborate more on this process.
When my phone is connect to the computer via usb is is constantly trying to install drivers. I had already installed LG usb connection drivers in the past and it was successful. It almost seems it tries to install driver yet fails after receiving no input from the phone, and then request LG CD with drivers.
babaghanush said:
hi, thanks for your reply. Again I very much new to the rooting and android OS tinkering, and nowhere close to an experienced user.
I tried to use google with your information in regards to how to use flow ROM with expansion.exe, but did not get any leads.
I would appreciate if you could elaborate more on this process.
When my phone is connect to the computer via usb is is constantly trying to install drivers. I had already installed LG usb connection drivers in the past and it was successful. It almost seems it tries to install driver yet fails after receiving no input from the phone, and then request LG CD with drivers.
Click to expand...
Click to collapse
Try to find driver on the web-site of producer. Set them. Overload a vehicle in Bootloader. In the controller of devices on компе must be determined your device. Then on a computer start sewing - .EXE.
Did you get this problem resolved? I have the exact problem with the exact phone!!!
thank you very much
Hello everybody,
I got my hands on this phone and I tampered too much with Qualcomm's FAT partition with the secondary bootloader, hardbricking the phone itself.
Trying to turn the phone on, shows the Samsung logo for some seconds then shuts down and disconnects, Download Mode is unaccessible but with VolUP+Home+Power the phone just stays connected (with the screen being black), but ignores any attempt to flash, Odin staying stuck on "SetupConnection...".
What I've tried already:
- Flashing with Heimdall -- phone isn't even recognized
- Removing the battery "trick" etc, etc, etc
- Changing .tar.md5 package
- Forcing a repartition with the .pit
Any clue might be useful, thanks in advance to anyone replying.
LucentW said:
Hello everybody,
I got my hands on this phone and I tampered too much with Qualcomm's FAT partition with the secondary bootloader, hardbricking the phone itself.
Trying to turn the phone on, shows the Samsung logo for some seconds then shuts down and disconnects, Download Mode is unaccessible but with VolUP+Home+Power the phone just stays connected (with the screen being black), but ignores any attempt to flash, Odin staying stuck on "SetupConnection...".
What I've tried already:
- Flashing with Heimdall -- phone isn't even recognized
- Removing the battery "trick" etc, etc, etc
- Changing .tar.md5 package
- Forcing a repartition with the .pit
Any clue might be useful, thanks in advance to anyone replying.
Click to expand...
Click to collapse
in my opinion go to coustmer service and you know it but i think
@ShadowsDie can help you
LucentW said:
Hello everybody,
I got my hands on this phone and I tampered too much with Qualcomm's FAT partition with the secondary bootloader, hardbricking the phone itself.
Trying to turn the phone on, shows the Samsung logo for some seconds then shuts down and disconnects, Download Mode is unaccessible but with VolUP+Home+Power the phone just stays connected (with the screen being black), but ignores any attempt to flash, Odin staying stuck on "SetupConnection...".
What I've tried already:
- Flashing with Heimdall -- phone isn't even recognized
- Removing the battery "trick" etc, etc, etc
- Changing .tar.md5 package
- Forcing a repartition with the .pit
Any clue might be useful, thanks in advance to anyone replying.
Click to expand...
Click to collapse
You shouldnt had to play with the bootloader neither the SBL
Im sorry to tell you that if your phone doesnt acces neither recovery and download mode it is hard bricked
that is why odin doesnt recognize the device
however, USB JIG is the best solution (the other one is changing the motherboard)
You can follow this instructions http://forum.xda-developers.com/galaxy-s2/help/guide-how-to-make-usb-jig-reset-binary-t1604707 to build one
using this SHOULD work but its even possible your bootloader is so messed up that will not open
You told me there about download mode, what about recovery mode? althought it should not work maybe God gives you a second chance
ShadowsDie said:
You shouldnt had to play with the bootloader neither the SBL
Im sorry to tell you that if your phone doesnt acces neither recovery and download mode it is hard bricked
that is why odin doesnt recognize the device
however, USB JIG is the best solution (the other one is changing the motherboard)
You can follow this instructions http://forum.xda-developers.com/galaxy-s2/help/guide-how-to-make-usb-jig-reset-binary-t1604707 to build one
using this SHOULD work but its even possible your bootloader is so messed up that will not open
You told me there about download mode, what about recovery mode? althought it should not work maybe God gives you a second chance
Click to expand...
Click to collapse
Actually ODIN recognizes the phone, but hangs on "SetupConnection...", sure the simplest solution might be the jig if there's a secondary bootloader in situ.
Obviously the recovery mode is dead, but still, I saw that it bypasses Samsung's logo and just reboots.
Since it's Qualcomm, probably the microSD emergency procedure used on the S3s might be a fair try.
If someone has still a working phone, can please do a dd image of the first 100 MB of the EMMC so I can see if this option is viable?
Might be a nice solution for hard bricked Qualcomm-based Samsung phones to unbrick those.
LucentW said:
Actually ODIN recognizes the phone, but hangs on "SetupConnection...", sure the simplest solution might be the jig if there's a secondary bootloader in situ.
Obviously the recovery mode is dead, but still, I saw that it bypasses Samsung's logo and just reboots.
Since it's Qualcomm, probably the microSD emergency procedure used on the S3s might be a fair try.
If someone has still a working phone, can please do a dd image of the first 100 MB of the EMMC so I can see if this option is viable?
Might be a nice solution for hard bricked Qualcomm-based Samsung phones to unbrick those.
Click to expand...
Click to collapse
First, for the SetupConnection try changing the ports but first BE SURE Kies is closed or end the task as Kies closes your connections using third-party programs
then reinstall samsung usb drivers or even adb drivers are good.
if you will find anyway to execute the command adb reboot-bootloader you could probably save the phone
2. I just read about the microSD procedure, it looks like a pretty clever idea
I wonder how do you know how many MB's you need
so i have done here a 70MB IMG, and with 100 didnt worked so I did a 99 MB one
Remember you need Class10 16 GB Card
If somehow this solved your problem, i will do a post in our General Section
Good Luck, i'll stay tuned.
EDIT: I just noticed the files have 169 MB so I can't post them here, tell me your email and i send you, my email is [email protected]
ShadowsDie said:
First, for the SetupConnection try changing the ports but first BE SURE Kies is closed or end the task as Kies closes your connections using third-party programs
then reinstall samsung usb drivers or even adb drivers are good.
if you will find anyway to execute the command adb reboot-bootloader you could probably save the phone
2. I just read about the microSD procedure, it looks like a pretty clever idea
I wonder how do you know how many MB's you need
so i have done here a 70MB IMG, and with 100 didnt worked so I did a 99 MB one
Remember you need Class10 16 GB Card
If somehow this solved your problem, i will do a post in our General Section
Good Luck, i'll stay tuned.
EDIT: I just noticed the files have 169 MB so I can't post them here, tell me your email and i send you, my email is [email protected]
Click to expand...
Click to collapse
I don't have Kies installed, since I never kept any Samsung phone with the stock TouchWiz ROM, but only the USB Drivers package for ODIN and so on.
I sent you a PM with my e-mail address, but you could upload the img to MEGA or whatever file locker service...
In the case this get sorted, I'll upload the IMG over my server and drop the link, so you don't need to worry about the link expiring or whatever
LucentW said:
I don't have Kies installed, since I never kept any Samsung phone with the stock TouchWiz ROM, but only the USB Drivers package for ODIN and so on.
I sent you a PM with my e-mail address, but you could upload the img to MEGA or whatever file locker service...
In the case this get sorted, I'll upload the IMG over my server and drop the link, so you don't need to worry about the link expiring or whatever
Click to expand...
Click to collapse
check your email
ShadowsDie said:
check your email
Click to expand...
Click to collapse
Tried to burn the SD card, it seems that the 7227A doesn't support boot-from-SD.
Anyways, I ordered off eBay for some change a jig dongle, as soon as I get that I'll try that way, but I think that it won't work since most of the hardware components (except for the NAND) are not made by Samsung.
I'll let you know how it proceeds
i rooted my phone and i wanted to switch rom for it,i flashed h850 rom rebooted device and it wont boot...i figured im on qualcomm 9008 mode in my computer so what can i do?
please please help me!!
thanks in advance..
Put it into download mode and restore the device via LGUP+TOT file, or if you made a backup, just reboot into recovery and restore your backup...
Dark Nightmare said:
Put it into download mode and restore the device via LGUP+TOT file, or if you made a backup, just reboot into recovery and restore your backup...
Click to expand...
Click to collapse
You probably didnt understand me well.. I cant put it in any mode...it wont turn on on any condition..
You said you rebooted twice, that tells me the device powers on, therefore, by doing a battery pull, holding the recovery or download mode button combos and powering up should get you into the desired mode. IF its not powering on at all:
1. Try charging the battery externally and try again.
2. See if the device is being recognized by a pc, if so there is hope that resting the device and trying again may work or we can see what mode it is in via adb/fastboot to get the device into a recoverable mode.
So....
Dark Nightmare said:
You said you rebooted twice, that tells me the device powers on, therefore, by doing a battery pull, holding the recovery or download mode button combos and powering up should get you into the desired mode. IF its not powering on at all:
1. Try charging the battery externally and try again.
2. See if the device is being recognized by a pc, if so there is hope that resting the device and trying again may work or we can see what mode it is in via adb/fastboot to get the device into a recoverable mode.
So....
Click to expand...
Click to collapse
The computer recognizes my device as qualcomm 9008
I have the same problem. My phone is dead only shows Qualcomm 9008.
Silly... If it's not for your phone why would you flash it??? Might have to wait for the official kdz from lg assuming you can some how get it into download mode. Or simply use your insurance for a new device. Expensive lesson learned
Maybe you can try the lg mobile support tool, since a tot file is available LG may have the stock kdz file available now, so try the recovery option for the mobile support tool.
Pretty sure that Qualcomm message thing is the true hard brick...
Sent from my pretty nifty brand new LG V10
This might sound stupid and it is usually for devices which have problems turning on or similar. I think is better to try anything that not trying all the options.
Why dont you try removing the battery, then close the module part without the battery. Press and hold the power button for at least 30 seconds. then release it. then put the batttery back on and try to make it boot into download mode. Chances are slim but the chance still there. This worked with my Samsung galaxy s5 after i flashed a rom that claimed to be for all models including the tmobile version when it clearly was for the g900f version . and i decided to try what i have done with other types of electronics and it worked.
Just tried on my phone. No go. Still dead. Trying lg repair. Hope I can get it fixed and not cost a arm and a leg.
Here is a guide to recover from 9008 mode
Here is a tool to extract kdz from tot
I've not read through these all the way, but if the PC sees it at all, it's not truly bricked... It might just be a pain in the ... to get it fixed. Those 2 links are good starting points for you. I hope you get this resolved.
I have the same error... My LG g5 H860 no turn on only connect in the PC on mode Qualcomm HS-USB QDLoader 9800.
Any idea or solution to resolve this?
Thx
BR
Dark Nightmare said:
Put it into download mode and restore the device via LGUP+TOT file, or if you made a backup, just reboot into recovery and restore your backup...
Click to expand...
Click to collapse
same issue just that my lgg5 tm is stuck on the firmware update for trying to root via lgup/tot file now not even lg bridge reads the phone it wants to then it says can not odetect nothin has worked