What portion of the "hack" affects the reception - Verizon Samsung Galaxy S III

Rooting, ROMS, Kernels, Basebands, MODs, So many flashing options. I lost my reception at my cottage which is on an extended network roaming. As soon as I go into that area everything drops, voice and data. I Odined back to Stock unrooted did a factory reset and the service returned flawlessly.
I was on latest baseband J1 at the time, SynergyROM, MIEA backed up, bootloader unlocked.
Now I'm getting itchy fingers again. Want to go back to Synergy, etc. But I DON'T want to loose my reception while I'm at the cottage for a few days. It's my only connection to the world.
Starting from scratch again, what could've been the culprit?

iclickjohn said:
Rooting, ROMS, Kernels, Basebands, MODs, So many flashing options. I lost my reception at my cottage which is on an extended network roaming. As soon as I go into that area everything drops, voice and data. I Odined back to Stock unrooted did a factory reset and the service returned flawlessly.
I was on latest baseband J1 at the time, SynergyROM, MIEA backed up, bootloader unlocked.
Now I'm getting itchy fingers again. Want to go back to Synergy, etc. But I DON'T want to loose my reception while I'm at the cottage for a few days. It's my only connection to the world.
Starting from scratch again, what could've been the culprit?
Click to expand...
Click to collapse
There is a new baseband kernel. Its the (K1) kernel. Its in scrolsers ROMS and pretty much on every touchwiz d2vzw ROM.
Link: http://forum.xda-developers.com/showthread.php?t=1832070
^This is clean ROM 5.0! And its the ROM to have.
Sent from my SCH-I535 using xda app-developers app

iclickjohn said:
Rooting, ROMS, Kernels, Basebands, MODs, So many flashing options. I lost my reception at my cottage which is on an extended network roaming. As soon as I go into that area everything drops, voice and data. I Odined back to Stock unrooted did a factory reset and the service returned flawlessly.
I was on latest baseband J1 at the time, SynergyROM, MIEA backed up, bootloader unlocked.
Now I'm getting itchy fingers again. Want to go back to Synergy, etc. But I DON'T want to loose my reception while I'm at the cottage for a few days. It's my only connection to the world.
Starting from scratch again, what could've been the culprit?
Click to expand...
Click to collapse
Baseband updates certainly do affect signal. It seems that the stock one works best for you.
The good news is you don't need to update baseband to go to a different ROM. You can keep your stock radio and flash a new jellybean leak without altering your signal.
Sent from my SCH-I535 using Tapatalk 2

I've also noticed that many ROMs have roaming disabled by default. Not sure if it makes a difference, but might help.
Sent from my VS920 4G using xda app-developers app

I was on synergy r73 until last night. I switched over to eclipse and now have constant 3g drops. Same radios.
I really like eclipse. I'd like to find a solution for this.
Tap'd from an eclipsed s3

TheDiabolicaL1 said:
I was on synergy r73 until last night. I switched over to eclipse and now have constant 3g drops. Same radios.
I really like eclipse. I'd like to find a solution for this.
Tap'd from an eclipsed s3
Click to expand...
Click to collapse
Try a different radio and rpm file. I use eclipse and it's a better signal then stock
Sent from my VS920 4G using xda app-developers app

kintwofan said:
Try a different radio and rpm file. I use eclipse and it's a better signal then stock
Sent from my VS920 4G using xda app-developers app
Click to expand...
Click to collapse
I have the same issue on Eclipse...can you clarify the process for this? I'm new to Samsung. Does this have to be done with ODIN? Which (modem?) is it you're using?

awenthol said:
I have the same issue on Eclipse...can you clarify the process for this? I'm new to Samsung. Does this have to be done with ODIN? Which (modem?) is it you're using?
Click to expand...
Click to collapse
Just get the radio from here and flash in recovery I use the lj1, but just try different ones to see what works for you.
Sent from my SCH-I535

kintwofan said:
Just get the radio from here and flash in recovery I use the lj1, but just try different ones to see what works for you.
Sent from my SCH-I535
Click to expand...
Click to collapse
Got ya...went and looked through Android Dev after this and found it. I never look through that forum since AOSP has it's own

awenthol said:
Got ya...went and looked through Android Dev after this and found it. I never look through that forum since AOSP has it's own
Click to expand...
Click to collapse
Verdict?
Sent from my SCH-I535 using Tapatalk 2

So far, the latest seems better...

Please read forum rules before posting
Questions go in Q&A
Thread moved
Thank you for your cooperation
Friendly Neighborhood Moderator

Related

Lost "H", only showing 3G

Sorry to start another thread about this but i've looked and searched.. I flashed Android Revolution HD last week, and I've only have been able to get 3g on my status bar since. I've tried flashing different roms to no avail. I did a quick speedtest and got 1.4 down 1.2 up. If I remember correctly you have to flash back to completely unrooted stock. ?? is this the only way ?
Maybe if you flashed a new radio it would fix it.
I tried it before and it didn't work but I just tried it again through bootloader and it's back.. weird.. 3.0 down and 1 up Thanks
Any help with this, stayed on hspa for a bit then switched to 3g.. do i have to go back to stock then re-root? Thanks in advance.
Sent from my Inspire 4G using XDA Premium App
djowett said:
Any help with this, stayed on hspa for a bit then switched to 3g.. do i have to go back to stock then re-root? Thanks in advance.
Sent from my Inspire 4G using XDA Premium App
Click to expand...
Click to collapse
I've noticed that sometimes my connection will be 3G, then switch to H once a data session starts (many other users have reported this also, regardless of the ROM being used). Is this the case with you? I assume you normally have HSDPA (or HSPA+)? If your speeds aren't affected, I wouldn't mess with anything. If so, try and reflash the radio, as the OP tried. Give it 20 minutes or so before testing again.
No I completely lost hspa, I think my speeds dropped. Tried flashing a new radio a couple of times, tried everything. I was on 3g for a month or so. RUU'd back to stock, now its fine. Thanks though.
djowett said:
Sorry to start another thread about this but i've looked and searched.. I flashed Android Revolution HD last week, and I've only have been able to get 3g on my status bar since. I've tried flashing different roms to no avail. I did a quick speedtest and got 1.4 down 1.2 up. If I remember correctly you have to flash back to completely unrooted stock. ?? is this the only way ?
Click to expand...
Click to collapse
Are you using the stock ROM?
Twistitup said:
Are you using the stock ROM?
Click to expand...
Click to collapse
...
uhhh did you read how many ROM's he's flashed? Really....

[Q] Searching for Service

I haven't found any answers on this, but once or twice per day my phone will be stuck on Searching for Service even though in the status bar, it shows like 3 bars of 3G or 4G. Data still seems to work, but this seriously drains the battery. I'm on stock unrooted HD. Any advice is appreciated. I already tried a new SIM. I bought this phone here on xda, no box, so I doubt Verizon would let me exchange it.
I know this is a silly question but what radio is installed?
Tapped² from my I5³5
The HD radio baseband
Sent from my SCH-I535 using xda premium
Amphibliam said:
The HD radio baseband
Sent from my SCH-I535 using xda premium
Click to expand...
Click to collapse
I would upgrade to the vrlg7 if you can. New radios are released for precisely this reason.
Tapped² from my I5³5
(Jason) said:
I would upgrade to the vrlg7 if you can. New radios are released for precisely this reason.
Tapped² from my I5³5
Click to expand...
Click to collapse
VRLG7 is a downgrade in release but does not hurt to reflash any of the modems to see if it fixes problem and which works better for your area. Affects 3G more than it does 4G..
(Jason) said:
I would upgrade to the vrlg7 if you can. New radios are released for precisely this reason.
Tapped² from my I5³5
Click to expand...
Click to collapse
I had this issue myself. I downgraded to the vlrg7 and my phone works great.........
Sent from my SCH-I535 using xda app-developers app
Can I flash it via odin without root?
prdog1 said:
VRLG7 is a downgrade in release but does not hurt to reflash any of the modems to see if it fixes problem and which works better for your area. Affects 3G more than it does 4G..
Click to expand...
Click to collapse
Oh ok, thanks for the correction , i didnt take the update so i was unaware.
Tapped² from my I5³5
It still seems to be happening. I don't know if it's better but it's still happening. Any other ideas?
Sent from my SCH-I535 using xda premium
Amphibliam said:
Can I flash it via odin without root?
Click to expand...
Click to collapse
Yep.
Tapped² from my I5³5
Like I said I tried G7 and it's worse. I'll try he. Idk why I haven't gotten the update yet
Sent from my SCH-I535 using xda premium
Amphibliam said:
It still seems to be happening. I don't know if it's better but it's still happening. Any other ideas?
Sent from my SCH-I535 using xda premium
Click to expand...
Click to collapse
Maybe root it and try a custom kernel, though I'm not positive that will help. Possibly a total wipe and reinstall of a stock system? If you bought it from someone here on xda, chances are it has seen some mods. Hopefully someone with more knowledge on the subject will chime in for ya. I just hope you didnt buy someone else's problem... :-\
Tapped² from my I5³5
I got it and it had never been rooted before. I rooted it, used custom ROMs, they all weren't my cup of tea, so I unrooted and flashed the stock HD images via ODIN yesterday. I just flashed the HE radio, and it seems to at least be a bit better. I'll keep experimenting.
It's still dropping signal. Sounds like I'll be calling up Verizon tonight.
Amphibliam said:
It's still dropping signal. Sounds like I'll be calling up Verizon tonight.
Click to expand...
Click to collapse
Does the tower update function (#611) work witb 4g phones? Sorry i wasnt much help.
Tapped² from my I5³5
No and I tried *228 as well. This is so dumb.
Amphibliam said:
No and I tried *228 as well. This is so dumb.
Click to expand...
Click to collapse
Uhh.. yeah don't dial *228 on a 4g phone. It could fry your SIM.
Well I did it and a samsung dialog box popped up and said, "HELLL NOOO. A SIM card does all dis crap."
So, right now I'm on unrooted stock HE, and while the problem seems to be less of an issue, it's still there. Any other suggestions?

[Q] Cyanogenmod 10.1 RC1 Data Connection Issue

So I did a full clean wipe, twice just to be sure.
Flashed RC1 and everything seemed to be going great at first. Then I noticed that the signal is dropping in and out. (I live in San Diego) It won't hold a signal for any reasonable amount of time. So it drops from 4G LTE going off. I've rebooted. At a bit of a loss. I'm operating on ATT.
Should I try to reflash? I was previously running CM 10.0 with no serious issues.
I've made sure the priority is LTE/GSM
Any help would be greatly appreciated!
May be your APN? What radio are you using?
Sent from my Nexus 7 using XDA
Same happened to me. Reflashed the modem problem fixed.
Sent from my SAMSUNG-SGH-I727 using xda app-developers app
I had it on ATT Phone and then switched it to ATT LTE. Issue wasn't resolved. I tried the other APNs as well. Same result.
For poops and giggles I flashed the most recent nightly 05/06 and still had the same issue.
May seem silly to ask, but how do you flash the modem? That sounds like it could be a solution.
Edit: Ermm what radios did you flash to fix the problem?
Looking more like you need the latest UCMC1 radio. Happened with a big kernel update in the nightlies, since this is getting closer to stable, I'm sure we'll see this problem more as more people start updating.
http://forum.xda-developers.com/showpost.php?p=40731838&postcount=594
LoSt180 said:
Looking more like you need the latest UCMC1 radio. Happened with a big kernel update in the nightlies, since this is getting closer to stable, I'm sure we'll see this problem more as more people start updating.
http://forum.xda-developers.com/showpost.php?p=40731838&postcount=594
Click to expand...
Click to collapse
Yea, I flashed that one after I found it on a post about the radios. It fixed the problem to an extent. However I'm getting much weaker signal than usual (although this could be the bars not displaying properly maybe, I don't want to jump immediately to a conclusion) and also am getting the data bars greyed out which means it's not.
Do you recommend reflashing the radio again?
b2tracken said:
Yea, I flashed that one after I found it on a post about the radios. It fixed the problem to an extent. However I'm getting much weaker signal than usual (although this could be the bars not displaying properly maybe, I don't want to jump immediately to a conclusion) and also am getting the data bars greyed out which means it's not.
Do you recommend reflashing the radio again?
Click to expand...
Click to collapse
b2tracken,
Just wanted to say thanks for your post here and that I'm experiencing the same exact thing. Yesterday I upgraded my skyrocket from an old ICS install to the latest 4.2.2 with CM 10.1, coincidentally right when this RC1 came out, so I quickly upgraded from M3 to RC1 last night. This morning I noticed that something was up with the radio and read your post. I flashed the radio to UCMC1 like you probably did and now I'm getting a connection, but about half as strong (in bars) as before the whole upgrade. Really no complaints yet - it hasn't hindered phone calls or mobile data connection - but I would be interested to find out if there is anything I can do to improve it, or configure it properly. I'm a big noob when it comes to phones.
Thanks,
Chad
wickm said:
b2tracken,
Just wanted to say thanks for your post here and that I'm experiencing the same exact thing. Yesterday I upgraded my skyrocket from an old ICS install to the latest 4.2.2 with CM 10.1, coincidentally right when this RC1 came out, so I quickly upgraded from M3 to RC1 last night. This morning I noticed that something was up with the radio and read your post. I flashed the radio to UCMC1 like you probably did and now I'm getting a connection, but about half as strong (in bars) as before the whole upgrade. Really no complaints yet - it hasn't hindered phone calls or mobile data connection - but I would be interested to find out if there is anything I can do to improve it, or configure it properly. I'm a big noob when it comes to phones.
Thanks,
Chad
Click to expand...
Click to collapse
The only other thing that I have changed is going and changing the APN under mobile networks to ATT LTE from ATT Phone. I'm getting about half signal also and intermittent issues with it greying out. (They seem to have not been very prevalent.) Seems that I'm not the only one with the issue which is fortunate. Give that a shot. Hopefully it gets worked out in the next release.
Att ucmc1 apn
SO I've uploaded the original UCMC1 stock ATT APN, you can just create a new APN and set it like these images.
Also wondering, after you cleanup (format data, system, cache, dalvik cache), No reboots, you do the next in the following order:
1-flash UCMC1 Radio
2-flash CM10.1 ROM (I'm still on 04/23 and everything works: http://forum.xda-developers.com/showthread.php?t=2272261)
3-flash gapps from 20130301 (http://goo.im/gapps)
Good luck,
Don't forget to hit THANKS if I helped you
Having the same exact issue, I've done everything stated here, only thing i did differently was updated the radio after CM.
Well the problem came back randomly with RC2 to an extent.
Now everything is showed as greyed out and no connection available including wifi.
Anybody have a clue on this?
b2tracken said:
Well the problem came back randomly with RC2 to an extent.
Now everything is showed as greyed out and no connection available including wifi.
Anybody have a clue on this?
Click to expand...
Click to collapse
Use a sock based Rom. 4.2 drops data and has all sorts of issues.
Sent from my SAMSUNG-SGH-I727 using Tapatalk 2
In case it was missed, strait from the horse's mouth:
http://forum.xda-developers.com/showpost.php?p=41349665&postcount=2648
topprospect said:
+1. UCMC1 should be used on all current CM10.1 builds. Any older radios will cause major problems with the newer JB-based blobs we use in CM10.1 past around 4/24.
One caveat: I don't know about Rogers users, sorry guys. If you have an official JB release from Samsung, you should use that radio. (Otherwise you will have to use UCMC1)
Click to expand...
Click to collapse
UCMC1 Radio: You must have the latest radio/modem installed or you will experience problems.
http://forum.xda-developers.com/showthread.php?t=2228292
LoSt180 said:
In case it was missed, strait from the horse's mouth:
http://forum.xda-developers.com/showpost.php?p=41349665&postcount=2648
UCMC1 Radio: You must have the latest radio/modem installed or you will experience problems.
http://forum.xda-developers.com/showthread.php?t=2228292
Click to expand...
Click to collapse
It seems no matter what I have issues. Now I'm having more issues with RRs and general crashes that force me to clear completely. I updated the radios but still had issues after. Almost thinking going back to square 1 and rerooting etc etc.
b2tracken said:
It seems no matter what I have issues. Now I'm having more issues with RRs and general crashes that force me to clear completely. I updated the radios but still had issues after. Almost thinking going back to square 1 and rerooting etc etc.
Click to expand...
Click to collapse
No need to root to flash roms.
Sent from my SAMSUNG-SGH-I727 using Tapatalk 2
xcrazydx said:
No need to root to flash roms.
Sent from my SAMSUNG-SGH-I727 using Tapatalk 2
Click to expand...
Click to collapse
I'm aware. I'm already rooted, I just wanted to know if it's worth it to go back to stock then try to redo everything.
You said re-root. You don't need root to flash roms.
And probably not, cm is all busted right now anyways and data drops, reboots and all the other stuff is gonna happen regardless.
xcrazydx said:
You said re-root. You don't need root to flash roms.
Sent from my SAMSUNG-SGH-I727 using Tapatalk 2
Click to expand...
Click to collapse
Well I would have to reroot if I took it back to stock. Thus the reroot etc etc
b2tracken said:
Well I would have to reroot if I took it back to stock. Thus the reroot etc etc
Click to expand...
Click to collapse
No you wouldn't
Sent from my SAMSUNG-SGH-I727 using Tapatalk 2
b2tracken said:
It seems no matter what I have issues. Now I'm having more issues with RRs and general crashes that force me to clear completely. I updated the radios but still had issues after. Almost thinking going back to square 1 and rerooting etc etc.
Click to expand...
Click to collapse
What nightly are you on? Anything after 4/23 (including the RC's) will have a lot of those instability issues. The developers are working hard to fix it if you want to read the development thread.

[Q] Keep new firmware but use old modem/rpm?

I have a rooted/unlocked bootloader with the stock Touchwiz ROM on my phone, and since we're all having problems with the slow LTE speeds, I was wondering if I would be able to flash the modem/radio from the MD1 or KL3 onto my phone for better signal/speeds?
yepyep14u2know said:
I have a rooted/unlocked bootloader with the stock Touchwiz ROM on my phone, and since we're all having problems with the slow LTE speeds, I was wondering if I would be able to flash the modem/radio from the MD1 or KL3 onto my phone for better signal/speeds?
Click to expand...
Click to collapse
You can flash them, but it may or may not break some features especially if you flash an AIO (All In One)
Thanks! I'll have to dig around here and see what I can find
Sent from my SCH-I535 using xda app-developers app
yepyep14u2know said:
I have a rooted/unlocked bootloader with the stock Touchwiz ROM on my phone, and since we're all having problems with the slow LTE speeds, I was wondering if I would be able to flash the modem/radio from the MD1 or KL3 onto my phone for better signal/speeds?
Click to expand...
Click to collapse
This worked for me, but it took a few tries. The first couple times gps got screwed up. I ended up doing a factory reset, then odin flashed back to mb1 (unrooting) . Then I let it update, rooted again with the md3 bootchain and then flashed the mb1 firmware. Happy to say Gps lock is instant and I'm back to normal 4g sppeds
Screw you Verizon!!! Why should we have to fix something you broke!
Sent from my SCH-I535 using xda app-developers app
Please read forum rules before posting
Questions and help issues go in Q&A and Help sections
Thread moved
Thank you for your cooperation
Friendly Neighborhood Moderator
Can you flash the modem to a non unlocked boot loader?
Sent from my Nexus 4 using Tapatalk 4 Beta
Never mind. you can fyi
Sent from my Nexus 4 using Tapatalk 4 Beta
yepyep14u2know said:
I have a rooted/unlocked bootloader with the stock Touchwiz ROM on my phone, and since we're all having problems with the slow LTE speeds, I was wondering if I would be able to flash the modem/radio from the MD1 or KL3 onto my phone for better signal/speeds?
Click to expand...
Click to collapse
You might also consider some of the custom TW ROMS that have all the OTA has to offer and more with better stability. Synergy, Hyperdrive and MOAR come to mind, but there are others as well in the development section.
I took the update the other day, but I flashed the previous one a few days ago.works fine
Sent from my SCH-I535 using xda premium

[Q] carbonROM baseband modem help

Can anyone please tell me whether CM-based ROMs like Carbon automatically update your baseband modem? I'm currently running the 5/15 nightly with ML1 modem and am wondering if I need to update my modem? Yesterday my radio system started acting really odd - my data connection completely dropped out for about an hour. When it came back I could only get 1x or 3G connections, but no 4GLTE. I am pretty sure it isn't location related, I generally get a good connection in the city (Portland, OR). All getting slow connection. Any suggestions would be greatly appreciated. Thanks in advance.
bdyer said:
Can anyone please tell me whether CM-based ROMs like Carbon automatically update your baseband modem? I'm currently running the 5/15 nightly with ML1 modem and am wondering if I need to update my modem? Yesterday my radio system started acting really odd - my data connection completely dropped out for about an hour. When it came back I could only get 1x or 3G connections, but no 4GLTE. I am pretty sure it isn't location related, I generally get a good connection in the city (Portland, OR). All getting slow connection. Any suggestions would be greatly appreciated. Thanks in advance.
Click to expand...
Click to collapse
ROMs do not change or update your baseband unless you are flashing a full ODIN image or taking an OTA. Modems have to be changed or updated separately and by you when you flash ROMs.
Different modems perform at different levels depending on the individual device and area where you live. Best thing to do is flash different modems, try each one for a few days, and test which one works best for you.
Sent from the Shark Tank using XDA Premium 4 mobile app
landshark68 said:
ROMs do not change or update your baseband unless you are flashing a full ODIN image or taking an OTA. Modems have to be changed or updated separately and by you when you flash ROMs.
Sent from the Shark Tank using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Thanks for the reply, I really appreciate it. If it's not too much trouble, could you tell me what version I should be using and where to get a flashable image? Thanks in advance.
bdyer said:
Thanks for the reply, I really appreciate it. If it's not too much trouble, could you tell me what version I should be using and where to get a flashable image? Thanks in advance.
Click to expand...
Click to collapse
Second to last page of this thread, post #1245:
http://forum.xda-developers.com/showthread.php?t=1788313
[FIRMWARE] <I535VRUCML1> (MODEM/RPM/TZ/SBL) Verizon SGS3 (SCH-I535)
You will have to figure out which one you should be using by trying different ones and gauging the results.
Sent from the Shark Tank using XDA Premium 4 mobile app

Categories

Resources