So I did a full clean wipe, twice just to be sure.
Flashed RC1 and everything seemed to be going great at first. Then I noticed that the signal is dropping in and out. (I live in San Diego) It won't hold a signal for any reasonable amount of time. So it drops from 4G LTE going off. I've rebooted. At a bit of a loss. I'm operating on ATT.
Should I try to reflash? I was previously running CM 10.0 with no serious issues.
I've made sure the priority is LTE/GSM
Any help would be greatly appreciated!
May be your APN? What radio are you using?
Sent from my Nexus 7 using XDA
Same happened to me. Reflashed the modem problem fixed.
Sent from my SAMSUNG-SGH-I727 using xda app-developers app
I had it on ATT Phone and then switched it to ATT LTE. Issue wasn't resolved. I tried the other APNs as well. Same result.
For poops and giggles I flashed the most recent nightly 05/06 and still had the same issue.
May seem silly to ask, but how do you flash the modem? That sounds like it could be a solution.
Edit: Ermm what radios did you flash to fix the problem?
Looking more like you need the latest UCMC1 radio. Happened with a big kernel update in the nightlies, since this is getting closer to stable, I'm sure we'll see this problem more as more people start updating.
http://forum.xda-developers.com/showpost.php?p=40731838&postcount=594
LoSt180 said:
Looking more like you need the latest UCMC1 radio. Happened with a big kernel update in the nightlies, since this is getting closer to stable, I'm sure we'll see this problem more as more people start updating.
http://forum.xda-developers.com/showpost.php?p=40731838&postcount=594
Click to expand...
Click to collapse
Yea, I flashed that one after I found it on a post about the radios. It fixed the problem to an extent. However I'm getting much weaker signal than usual (although this could be the bars not displaying properly maybe, I don't want to jump immediately to a conclusion) and also am getting the data bars greyed out which means it's not.
Do you recommend reflashing the radio again?
b2tracken said:
Yea, I flashed that one after I found it on a post about the radios. It fixed the problem to an extent. However I'm getting much weaker signal than usual (although this could be the bars not displaying properly maybe, I don't want to jump immediately to a conclusion) and also am getting the data bars greyed out which means it's not.
Do you recommend reflashing the radio again?
Click to expand...
Click to collapse
b2tracken,
Just wanted to say thanks for your post here and that I'm experiencing the same exact thing. Yesterday I upgraded my skyrocket from an old ICS install to the latest 4.2.2 with CM 10.1, coincidentally right when this RC1 came out, so I quickly upgraded from M3 to RC1 last night. This morning I noticed that something was up with the radio and read your post. I flashed the radio to UCMC1 like you probably did and now I'm getting a connection, but about half as strong (in bars) as before the whole upgrade. Really no complaints yet - it hasn't hindered phone calls or mobile data connection - but I would be interested to find out if there is anything I can do to improve it, or configure it properly. I'm a big noob when it comes to phones.
Thanks,
Chad
wickm said:
b2tracken,
Just wanted to say thanks for your post here and that I'm experiencing the same exact thing. Yesterday I upgraded my skyrocket from an old ICS install to the latest 4.2.2 with CM 10.1, coincidentally right when this RC1 came out, so I quickly upgraded from M3 to RC1 last night. This morning I noticed that something was up with the radio and read your post. I flashed the radio to UCMC1 like you probably did and now I'm getting a connection, but about half as strong (in bars) as before the whole upgrade. Really no complaints yet - it hasn't hindered phone calls or mobile data connection - but I would be interested to find out if there is anything I can do to improve it, or configure it properly. I'm a big noob when it comes to phones.
Thanks,
Chad
Click to expand...
Click to collapse
The only other thing that I have changed is going and changing the APN under mobile networks to ATT LTE from ATT Phone. I'm getting about half signal also and intermittent issues with it greying out. (They seem to have not been very prevalent.) Seems that I'm not the only one with the issue which is fortunate. Give that a shot. Hopefully it gets worked out in the next release.
Att ucmc1 apn
SO I've uploaded the original UCMC1 stock ATT APN, you can just create a new APN and set it like these images.
Also wondering, after you cleanup (format data, system, cache, dalvik cache), No reboots, you do the next in the following order:
1-flash UCMC1 Radio
2-flash CM10.1 ROM (I'm still on 04/23 and everything works: http://forum.xda-developers.com/showthread.php?t=2272261)
3-flash gapps from 20130301 (http://goo.im/gapps)
Good luck,
Don't forget to hit THANKS if I helped you
Having the same exact issue, I've done everything stated here, only thing i did differently was updated the radio after CM.
Well the problem came back randomly with RC2 to an extent.
Now everything is showed as greyed out and no connection available including wifi.
Anybody have a clue on this?
b2tracken said:
Well the problem came back randomly with RC2 to an extent.
Now everything is showed as greyed out and no connection available including wifi.
Anybody have a clue on this?
Click to expand...
Click to collapse
Use a sock based Rom. 4.2 drops data and has all sorts of issues.
Sent from my SAMSUNG-SGH-I727 using Tapatalk 2
In case it was missed, strait from the horse's mouth:
http://forum.xda-developers.com/showpost.php?p=41349665&postcount=2648
topprospect said:
+1. UCMC1 should be used on all current CM10.1 builds. Any older radios will cause major problems with the newer JB-based blobs we use in CM10.1 past around 4/24.
One caveat: I don't know about Rogers users, sorry guys. If you have an official JB release from Samsung, you should use that radio. (Otherwise you will have to use UCMC1)
Click to expand...
Click to collapse
UCMC1 Radio: You must have the latest radio/modem installed or you will experience problems.
http://forum.xda-developers.com/showthread.php?t=2228292
LoSt180 said:
In case it was missed, strait from the horse's mouth:
http://forum.xda-developers.com/showpost.php?p=41349665&postcount=2648
UCMC1 Radio: You must have the latest radio/modem installed or you will experience problems.
http://forum.xda-developers.com/showthread.php?t=2228292
Click to expand...
Click to collapse
It seems no matter what I have issues. Now I'm having more issues with RRs and general crashes that force me to clear completely. I updated the radios but still had issues after. Almost thinking going back to square 1 and rerooting etc etc.
b2tracken said:
It seems no matter what I have issues. Now I'm having more issues with RRs and general crashes that force me to clear completely. I updated the radios but still had issues after. Almost thinking going back to square 1 and rerooting etc etc.
Click to expand...
Click to collapse
No need to root to flash roms.
Sent from my SAMSUNG-SGH-I727 using Tapatalk 2
xcrazydx said:
No need to root to flash roms.
Sent from my SAMSUNG-SGH-I727 using Tapatalk 2
Click to expand...
Click to collapse
I'm aware. I'm already rooted, I just wanted to know if it's worth it to go back to stock then try to redo everything.
You said re-root. You don't need root to flash roms.
And probably not, cm is all busted right now anyways and data drops, reboots and all the other stuff is gonna happen regardless.
xcrazydx said:
You said re-root. You don't need root to flash roms.
Sent from my SAMSUNG-SGH-I727 using Tapatalk 2
Click to expand...
Click to collapse
Well I would have to reroot if I took it back to stock. Thus the reroot etc etc
b2tracken said:
Well I would have to reroot if I took it back to stock. Thus the reroot etc etc
Click to expand...
Click to collapse
No you wouldn't
Sent from my SAMSUNG-SGH-I727 using Tapatalk 2
b2tracken said:
It seems no matter what I have issues. Now I'm having more issues with RRs and general crashes that force me to clear completely. I updated the radios but still had issues after. Almost thinking going back to square 1 and rerooting etc etc.
Click to expand...
Click to collapse
What nightly are you on? Anything after 4/23 (including the RC's) will have a lot of those instability issues. The developers are working hard to fix it if you want to read the development thread.
Related
Sorry to start another thread about this but i've looked and searched.. I flashed Android Revolution HD last week, and I've only have been able to get 3g on my status bar since. I've tried flashing different roms to no avail. I did a quick speedtest and got 1.4 down 1.2 up. If I remember correctly you have to flash back to completely unrooted stock. ?? is this the only way ?
Maybe if you flashed a new radio it would fix it.
I tried it before and it didn't work but I just tried it again through bootloader and it's back.. weird.. 3.0 down and 1 up Thanks
Any help with this, stayed on hspa for a bit then switched to 3g.. do i have to go back to stock then re-root? Thanks in advance.
Sent from my Inspire 4G using XDA Premium App
djowett said:
Any help with this, stayed on hspa for a bit then switched to 3g.. do i have to go back to stock then re-root? Thanks in advance.
Sent from my Inspire 4G using XDA Premium App
Click to expand...
Click to collapse
I've noticed that sometimes my connection will be 3G, then switch to H once a data session starts (many other users have reported this also, regardless of the ROM being used). Is this the case with you? I assume you normally have HSDPA (or HSPA+)? If your speeds aren't affected, I wouldn't mess with anything. If so, try and reflash the radio, as the OP tried. Give it 20 minutes or so before testing again.
No I completely lost hspa, I think my speeds dropped. Tried flashing a new radio a couple of times, tried everything. I was on 3g for a month or so. RUU'd back to stock, now its fine. Thanks though.
djowett said:
Sorry to start another thread about this but i've looked and searched.. I flashed Android Revolution HD last week, and I've only have been able to get 3g on my status bar since. I've tried flashing different roms to no avail. I did a quick speedtest and got 1.4 down 1.2 up. If I remember correctly you have to flash back to completely unrooted stock. ?? is this the only way ?
Click to expand...
Click to collapse
Are you using the stock ROM?
Twistitup said:
Are you using the stock ROM?
Click to expand...
Click to collapse
...
uhhh did you read how many ROM's he's flashed? Really....
I'm running the latest Cyanogen and cannot get 4g to save my life. I tried the *#*#info#*#* settings but nothing. I don't have the cdma+lte option like she does tho. I changed my ROM and wiped but nothing. My wifes stock TV gets 4g fine but i'm stuck in 3g
Any help?
sometimes on cm and aosp roms, instead of lte, it would be listed as other. usually a soft reset would get 4g back though. Might want to try the stock rom, rooted and see if you are still having troubles. Your sim might be on the fritz.
Same problem here in Baltimore. Runni.g Bamf soab. Radio 3.99
Sent from my ADR6400L using Tapatalk
Im on CM 7.1.1 , I was in Jacksonville 2 days ago, and I was able to pick up 4g no problem, have you updated your radios?
denonlake said:
Same problem here in Baltimore. Runni.g Bamf soab. Radio 3.99
Sent from my ADR6400L using Tapatalk
Click to expand...
Click to collapse
What on earth is a 3.99?
[*]cdma: 1.48.00.0906
[*]lte: 0.01.78.0906
Thanks guys. I'm downloading a stock ROM now, but how do I tell the radio? I believe its MR 2.5 but I forget. 4g worked before, but doesn't now. Not sure what I did. Under info I don't have other, but I've unknown. Still doesn't work with that.
Eh, bad stock ROM I came across, but I installed liquid now I've 4g. So could it be just a cm problem?
Double post.
Rooting, ROMS, Kernels, Basebands, MODs, So many flashing options. I lost my reception at my cottage which is on an extended network roaming. As soon as I go into that area everything drops, voice and data. I Odined back to Stock unrooted did a factory reset and the service returned flawlessly.
I was on latest baseband J1 at the time, SynergyROM, MIEA backed up, bootloader unlocked.
Now I'm getting itchy fingers again. Want to go back to Synergy, etc. But I DON'T want to loose my reception while I'm at the cottage for a few days. It's my only connection to the world.
Starting from scratch again, what could've been the culprit?
iclickjohn said:
Rooting, ROMS, Kernels, Basebands, MODs, So many flashing options. I lost my reception at my cottage which is on an extended network roaming. As soon as I go into that area everything drops, voice and data. I Odined back to Stock unrooted did a factory reset and the service returned flawlessly.
I was on latest baseband J1 at the time, SynergyROM, MIEA backed up, bootloader unlocked.
Now I'm getting itchy fingers again. Want to go back to Synergy, etc. But I DON'T want to loose my reception while I'm at the cottage for a few days. It's my only connection to the world.
Starting from scratch again, what could've been the culprit?
Click to expand...
Click to collapse
There is a new baseband kernel. Its the (K1) kernel. Its in scrolsers ROMS and pretty much on every touchwiz d2vzw ROM.
Link: http://forum.xda-developers.com/showthread.php?t=1832070
^This is clean ROM 5.0! And its the ROM to have.
Sent from my SCH-I535 using xda app-developers app
iclickjohn said:
Rooting, ROMS, Kernels, Basebands, MODs, So many flashing options. I lost my reception at my cottage which is on an extended network roaming. As soon as I go into that area everything drops, voice and data. I Odined back to Stock unrooted did a factory reset and the service returned flawlessly.
I was on latest baseband J1 at the time, SynergyROM, MIEA backed up, bootloader unlocked.
Now I'm getting itchy fingers again. Want to go back to Synergy, etc. But I DON'T want to loose my reception while I'm at the cottage for a few days. It's my only connection to the world.
Starting from scratch again, what could've been the culprit?
Click to expand...
Click to collapse
Baseband updates certainly do affect signal. It seems that the stock one works best for you.
The good news is you don't need to update baseband to go to a different ROM. You can keep your stock radio and flash a new jellybean leak without altering your signal.
Sent from my SCH-I535 using Tapatalk 2
I've also noticed that many ROMs have roaming disabled by default. Not sure if it makes a difference, but might help.
Sent from my VS920 4G using xda app-developers app
I was on synergy r73 until last night. I switched over to eclipse and now have constant 3g drops. Same radios.
I really like eclipse. I'd like to find a solution for this.
Tap'd from an eclipsed s3
TheDiabolicaL1 said:
I was on synergy r73 until last night. I switched over to eclipse and now have constant 3g drops. Same radios.
I really like eclipse. I'd like to find a solution for this.
Tap'd from an eclipsed s3
Click to expand...
Click to collapse
Try a different radio and rpm file. I use eclipse and it's a better signal then stock
Sent from my VS920 4G using xda app-developers app
kintwofan said:
Try a different radio and rpm file. I use eclipse and it's a better signal then stock
Sent from my VS920 4G using xda app-developers app
Click to expand...
Click to collapse
I have the same issue on Eclipse...can you clarify the process for this? I'm new to Samsung. Does this have to be done with ODIN? Which (modem?) is it you're using?
awenthol said:
I have the same issue on Eclipse...can you clarify the process for this? I'm new to Samsung. Does this have to be done with ODIN? Which (modem?) is it you're using?
Click to expand...
Click to collapse
Just get the radio from here and flash in recovery I use the lj1, but just try different ones to see what works for you.
Sent from my SCH-I535
kintwofan said:
Just get the radio from here and flash in recovery I use the lj1, but just try different ones to see what works for you.
Sent from my SCH-I535
Click to expand...
Click to collapse
Got ya...went and looked through Android Dev after this and found it. I never look through that forum since AOSP has it's own
awenthol said:
Got ya...went and looked through Android Dev after this and found it. I never look through that forum since AOSP has it's own
Click to expand...
Click to collapse
Verdict?
Sent from my SCH-I535 using Tapatalk 2
So far, the latest seems better...
Please read forum rules before posting
Questions go in Q&A
Thread moved
Thank you for your cooperation
Friendly Neighborhood Moderator
Recommend add-ons by Beanstown106
I535VRBMB1 Modem can be found HERE!
I535VRBMB1 RPM can be found HERE!
^^^ What are these? They're the "recommended add-ons" by JellyBeans at the bottom of the CleanROM post. Anyone know what these are. Is this a radio and something else?
Just curious, if I should flash these or not.
newest modem & radio/
flash them in ^this order////
The VRBMB1 modem and rpm were included Verizon's OTA update from 4.1.1 to 4.1.2. From what I've read, most people have experienced better data reception after flashing these, but some think it made things worse. I've flashed them and don't notice any difference in data, but possibly better GPS reception.
SempaiMatt said:
The VRBMB1 modem and rpm were included Verizon's OTA update from 4.1.1 to 4.1.2. From what I've read, most people have experienced better data reception after flashing these, but some think it made things worse. I've flashed them and don't notice any difference in data, but possibly better GPS reception.
Click to expand...
Click to collapse
I was updated to 4.1.2 before I flashed the CleanROM, so I should already have these then?
Spewed said:
I was updated to 4.1.2 before I flashed the CleanROM, so I should already have these then?
Click to expand...
Click to collapse
You should. If you go into Settings / About Phone, and the Baseband version (I think that's the modem) should say I535VRBMB1.
SempaiMatt said:
You should. If you go into Settings / About Phone, and the Baseband version (I think that's the modem) should say I535VRBMB1.
Click to expand...
Click to collapse
Great, thanks. I already do then.
Where can you get the newest radio then? I've flashed the newest modem from goo.im or some website like it, I forgot. But I never saw anything about getting the radio.... Was it kinda a package deal?
Sent from my SCH-I535 using xda app-developers app
Download the radio on the cleanrom page in the android development section. If you're wanting that particular radio. If you have Verizon and update to 4.1.2 then you already have them as established.
Sent from my SCH-I535 using xda app-developers app
Brightness Toggle
Is there anything I can do to fix the brightness toggle on the quick settings panel? For some reason it will only cycle between auto and full brightness and nothing in between...no matter which setting I put it on. Anyone know if there is an additional download for this?
Spewed said:
Download the radio on the cleanrom page in the android development section. If you're wanting that particular radio. If you have Verizon and update to 4.1.2 then you already have them as established.
Sent from my SCH-I535 using xda app-developers app
Click to expand...
Click to collapse
When I first got my S3 for Christmas, I immediately upgraded it to 4.1.2 and then rooted about a week later and installed CleanROM a day or two later! As of right now I'm running JellyBeans 13, but when I check the baseband version it says VRBLK3....should I update the modem and radio to the newest one? I'm always the first one to say if it ain't broke then don't fix it....are there any real benefits? Everything works great for me....Bluetooth, GPS, Wi-Fi, etc...
Sent from my SCH-I535 using Tapatalk 2
vmancini3 said:
When I first got my S3 for Christmas, I immediately upgraded it to 4.1.2 and then rooted about a week later and installed CleanROM a day or two later! As of right now I'm running JellyBeans 13, but when I check the baseband version it says VRBLK3....should I update the modem and radio to the newest one? I'm always the first one to say if it ain't broke then don't fix it....are there any real benefits? Everything works great for me....Bluetooth, GPS, Wi-Fi, etc...
Sent from my SCH-I535 using Tapatalk 2
Click to expand...
Click to collapse
Its up to u to update. I'm sure u only updated to 4.1.1 because 4.1.2 just rolled out recently. If its working fine don't worry about it.
Sent from my SCH-I535 using xda app-developers app
The title says it. My Wind SGH-T959W's (Galaxy S 4G) 4G is not working on the ROM that I am using. The ROM that I am using currently is Octane 2.3.6 for T959V, but all ROMs for that phone work on mine. 4G Only works on a few ROMs that I installed, but they aren't Deodexed (which i need). Is there a way to get the 4G to work on the phone?
Thanl You
FriendlyZombie said:
The title says it. My Wind SGH-T959W's (Galaxy S 4G) 4G is not working on the ROM that I am using. The ROM that I am using currently is Octane 2.3.6 for T959V, but all ROMs for that phone work on mine. 4G Only works on a few ROMs that I installed, but they aren't Deodexed (which i need). Is there a way to get the 4G to work on the phone?
Thanl You
Click to expand...
Click to collapse
If it says "H" next to the signal bar, you're using "4G". The stock Samsung ROM uses 4G instead of showing H, all other ROMs show H.
FBis251 said:
If it says "H" next to the signal bar, you're using "4G". The stock Samsung ROM uses 4G instead of showing H, all other ROMs show H.
Click to expand...
Click to collapse
There isn't an H either. I think the problem is that the ROM has support for only T-Mobile, but I'm just looking that there is a way i could get 4G with Wind.
@getochkn made a thread for the Wind LB6 modem here:
http://forum.xda-developers.com/showthread.php?t=1941078
There doesn't seem to be a flashable zip for 2.3.6 but if you update to anything newer than ICS you'll be able to flash it.
I actually recommend you give CM11 a go. 2.3.6 is now 2 years old and your phone is vulnerable to a lot of exploits that Samsung never patched but are fixed with more recent ROMs. KitKat runs amazingly well on this phone and you won't have the bloat that the stock Samsung rom comes with too.
FBis251 said:
@getochkn made a thread for the Wind LB6 modem here:
http://forum.xda-developers.com/showthread.php?t=1941078
There doesn't seem to be a flashable zip for 2.3.6 but if you update to anything newer than ICS you'll be able to flash it.
I actually recommend you give CM11 a go. 2.3.6 is now 2 years old and your phone is vulnerable to a lot of exploits that Samsung never patched but are fixed with more recent ROMs. KitKat runs amazingly well on this phone and you won't have the bloat that the stock Samsung rom comes with too.
Click to expand...
Click to collapse
I thought about that earlier, but I predicted that the battery life would be very bad, do you know anything about the battery life?
FriendlyZombie said:
I thought about that earlier, but I predicted that the battery life would be very bad, do you know anything about the battery life?
Click to expand...
Click to collapse
Check out the CM11 thread, there haven't been complaints about the ROM. There was an issue with a Google Play Services update causing some battery drain, but I released an update a few days ago that had a patch fixing that.
It's a solid ROM, it still amazes me how well it works on this phone .
FBis251 said:
Check out the CM11 thread, there haven't been complaints about the ROM. There was an issue with a Google Play Services update causing some battery drain, but I released an update a few days ago that had a patch fixing that.
It's a solid ROM, it still amazes me how well it works on this phone .
Click to expand...
Click to collapse
The rom works great, but it keepson bringing up themessage "The Process android.process.acore has stopped"
any way to fix this?
FriendlyZombie said:
The rom works great, but it keepson bringing up themessage "The Process android.process.acore has stopped"
any way to fix this?
Click to expand...
Click to collapse
Try doing a factory reset, if that doesn't work, do full wipes and then reinstall the ROM.
FBis251 said:
Try doing a factory reset, if that doesn't work, do full wipes and then reinstall the ROM.
Click to expand...
Click to collapse
I fixed the problem, and when I first flashed it the 4G was fully functional and i was alright. But then today the 4G wont work no matter what
Maybe i should flash the modem you gave me?
FriendlyZombie said:
I fixed the problem, and when I first flashed it the 4G was fully functional and i was alright. But then today the 4G wont work no matter what
Maybe i should flash the modem you gave me?
Click to expand...
Click to collapse
It wouldnt let me flash, is there any way fix it?
FriendlyZombie said:
It wouldnt let me flash, is there any way fix it?
Click to expand...
Click to collapse
I got 4G working by wiping everything, and installing the rom again. Then I installed gapps and 4G wont work. I did all of that again but didnt install gapps and it works great! :good: The ROM is actually very good for this phone and I will probably keep it like this.
But I still need the gapps for automatic updates, and very easily downloading apps. Mobogenie just doesnt do it for me.
And Candy Crush wont work as when i launch it, it stays at the loading screen then just closes to the home screen.
Any way to fix these issues?
3G not work in my country and with other carrier
Sent from my SGH-T959V using XDA Premium 4 mobile app
There is NO BETTER ROM than TEAM Acid CM11 for this phone. Top to bottom, this is the best its gonna get.