The title says it. My Wind SGH-T959W's (Galaxy S 4G) 4G is not working on the ROM that I am using. The ROM that I am using currently is Octane 2.3.6 for T959V, but all ROMs for that phone work on mine. 4G Only works on a few ROMs that I installed, but they aren't Deodexed (which i need). Is there a way to get the 4G to work on the phone?
Thanl You
FriendlyZombie said:
The title says it. My Wind SGH-T959W's (Galaxy S 4G) 4G is not working on the ROM that I am using. The ROM that I am using currently is Octane 2.3.6 for T959V, but all ROMs for that phone work on mine. 4G Only works on a few ROMs that I installed, but they aren't Deodexed (which i need). Is there a way to get the 4G to work on the phone?
Thanl You
Click to expand...
Click to collapse
If it says "H" next to the signal bar, you're using "4G". The stock Samsung ROM uses 4G instead of showing H, all other ROMs show H.
FBis251 said:
If it says "H" next to the signal bar, you're using "4G". The stock Samsung ROM uses 4G instead of showing H, all other ROMs show H.
Click to expand...
Click to collapse
There isn't an H either. I think the problem is that the ROM has support for only T-Mobile, but I'm just looking that there is a way i could get 4G with Wind.
@getochkn made a thread for the Wind LB6 modem here:
http://forum.xda-developers.com/showthread.php?t=1941078
There doesn't seem to be a flashable zip for 2.3.6 but if you update to anything newer than ICS you'll be able to flash it.
I actually recommend you give CM11 a go. 2.3.6 is now 2 years old and your phone is vulnerable to a lot of exploits that Samsung never patched but are fixed with more recent ROMs. KitKat runs amazingly well on this phone and you won't have the bloat that the stock Samsung rom comes with too.
FBis251 said:
@getochkn made a thread for the Wind LB6 modem here:
http://forum.xda-developers.com/showthread.php?t=1941078
There doesn't seem to be a flashable zip for 2.3.6 but if you update to anything newer than ICS you'll be able to flash it.
I actually recommend you give CM11 a go. 2.3.6 is now 2 years old and your phone is vulnerable to a lot of exploits that Samsung never patched but are fixed with more recent ROMs. KitKat runs amazingly well on this phone and you won't have the bloat that the stock Samsung rom comes with too.
Click to expand...
Click to collapse
I thought about that earlier, but I predicted that the battery life would be very bad, do you know anything about the battery life?
FriendlyZombie said:
I thought about that earlier, but I predicted that the battery life would be very bad, do you know anything about the battery life?
Click to expand...
Click to collapse
Check out the CM11 thread, there haven't been complaints about the ROM. There was an issue with a Google Play Services update causing some battery drain, but I released an update a few days ago that had a patch fixing that.
It's a solid ROM, it still amazes me how well it works on this phone .
FBis251 said:
Check out the CM11 thread, there haven't been complaints about the ROM. There was an issue with a Google Play Services update causing some battery drain, but I released an update a few days ago that had a patch fixing that.
It's a solid ROM, it still amazes me how well it works on this phone .
Click to expand...
Click to collapse
The rom works great, but it keepson bringing up themessage "The Process android.process.acore has stopped"
any way to fix this?
FriendlyZombie said:
The rom works great, but it keepson bringing up themessage "The Process android.process.acore has stopped"
any way to fix this?
Click to expand...
Click to collapse
Try doing a factory reset, if that doesn't work, do full wipes and then reinstall the ROM.
FBis251 said:
Try doing a factory reset, if that doesn't work, do full wipes and then reinstall the ROM.
Click to expand...
Click to collapse
I fixed the problem, and when I first flashed it the 4G was fully functional and i was alright. But then today the 4G wont work no matter what
Maybe i should flash the modem you gave me?
FriendlyZombie said:
I fixed the problem, and when I first flashed it the 4G was fully functional and i was alright. But then today the 4G wont work no matter what
Maybe i should flash the modem you gave me?
Click to expand...
Click to collapse
It wouldnt let me flash, is there any way fix it?
FriendlyZombie said:
It wouldnt let me flash, is there any way fix it?
Click to expand...
Click to collapse
I got 4G working by wiping everything, and installing the rom again. Then I installed gapps and 4G wont work. I did all of that again but didnt install gapps and it works great! :good: The ROM is actually very good for this phone and I will probably keep it like this.
But I still need the gapps for automatic updates, and very easily downloading apps. Mobogenie just doesnt do it for me.
And Candy Crush wont work as when i launch it, it stays at the loading screen then just closes to the home screen.
Any way to fix these issues?
3G not work in my country and with other carrier
Sent from my SGH-T959V using XDA Premium 4 mobile app
There is NO BETTER ROM than TEAM Acid CM11 for this phone. Top to bottom, this is the best its gonna get.
Related
rumors were they were going to push it out end of december 2010, anything yet?
samsungmobileca twitter says the OS is currently being tested for rogers, but no word on any actual release date.
You wont get it.
Not after the vibrant problems with bell
Sent from my SGH-I897 using XDA App
tjsooley said:
You wont get it.
Not after the vibrant problems with bell
Click to expand...
Click to collapse
Captivates don't have any sd card issues, just the bell vibrant. Rogers did say in the first half of 2011 you'll get the update, were just 4 days in though so keep waiting.
tjsooley said:
You wont get it.
Not after the vibrant problems with bell
Sent from my SGH-I897 using XDA App
Click to expand...
Click to collapse
The problems were with their ****ty Kies app. I built Assonance on top of that firmware and not a single person had an SD-card blowup in the thread.
Will it be made into an Odin when it comes out?
Sent from my Rogers Captivate using XDA app
tunefoo said:
Will it be made into an Odin when it comes out?
Sent from my Rogers Captivate using XDA app
Click to expand...
Click to collapse
I sure hope so, I dont think I will do any rom flashing till I know it can be flashed back to stock easily.
jonnyg1097 said:
I sure hope so, I dont think I will do any rom flashing till I know it can be flashed back to stock easily.
Click to expand...
Click to collapse
Can we flash it back to stock ROM though? I remember there was talk here about the stock ROM and how we can't flash it back to stock or something, but that was a couple months ago... and I've started to lose track of things here.
Edit: Hmm... Looks like I found a thread on how to get back to the Rogers ROM.
peachpuff said:
Captivates don't have any sd card issues, just the bell vibrant. Rogers did say in the first half of 2011 you'll get the update, were just 4 days in though so keep waiting.
Click to expand...
Click to collapse
They also said Froyo was to be released in mid-December of 2010. Phone release was also massively delayed.
MikeyMike01 said:
The problems were with their ****ty Kies app. I built Assonance on top of that firmware and not a single person had an SD-card blowup in the thread.
Click to expand...
Click to collapse
i believe it was infact the kernel that caused the issues, did you build the kernel from bell sources?
DG pulled perception 9 which was not even i9000m based but i think the kernel he built was. perception 9 was rereleased as 9.5 with a different kernel. there were users on that thread reporting sd card problems but very few, still risky. that said the telus rom didnt cause any problems and neither did the i9000 international so i think the captivate is safe. as the software is ready you guys might even beat att to the punch this time! if you get hsupa enabled this time ill definitely flash a rogers rom.
Ignore this message because of a double posting.
geokilla said:
Can we flash it back to stock ROM though? I remember there was talk here about the stock ROM and how we can't flash it back to stock or something, but that was a couple months ago... and I've started to lose track of things here.
Edit: Hmm... Looks like I found a thread on how to get back to the Rogers ROM.
Click to expand...
Click to collapse
I was able to get mine to stock Rogers ROM but I dont know if its able to get EXACTLY like how rogers has. Mine looks like the rogers one but I think it was made off the AT&T one because it has their logo on the bootup and its not JF6 (mine says JI2 unless thats how it is on a stock Rogers I didnt check before I did flashing), I was able to get rid of the AT&T logo but that still bugs me unless someone can confirm this for me.
Yeah. You can get the Rogers stock files somewhere on the forums and just flash it all using Heimdall. Thats what I did after Odin bricked my phone twice ;D. Also, no Froyo yet. Don't expect it any time soon - this IS Rogers we're dealing with.
Sent from my Captivate using XDA App
jonnyg1097 said:
I was able to get mine to stock Rogers ROM but I dont know if its able to get EXACTLY like how rogers has. Mine looks like the rogers one but I think it was made off the AT&T one because it has their logo on the bootup and its not JF6 (mine says JI2 unless thats how it is on a stock Rogers I didnt check before I did flashing), I was able to get rid of the AT&T logo but that still bugs me unless someone can confirm this for me.
Click to expand...
Click to collapse
Rogers stock is JI2.
MikeyMike01 said:
The problems were with their ****ty Kies app. I built Assonance on top of that firmware and not a single person had an SD-card blowup in the thread.
Click to expand...
Click to collapse
It isn't Kies that was the issue. This was happening to people well before the 2.2 update and at random times. My girlfriend's Vibrant has gone twice now. Once just randomly force closing everything and then dying while on 2.1, the second one which came from Samsung with 2.2 on it also did the same thing. She is now waiting for phone #3. Hardware has to be a factor.
speaking of which.. rogers/samsung has started pushing froyo 2.2 lol.. finally.. you'll need a kies update http://www.samsungapps.com/about/onPc.as
empz said:
speaking of which.. rogers/samsung has started pushing froyo 2.2 lol.. finally.. you'll need a kies update http://www.samsungapps.com/about/onPc.as
Click to expand...
Click to collapse
Really? That's weird, I've got the latest Kies but "Update Firmware" is still grayed out.
Can someone please make a flashable zip of the new baseband/modem available in the new update.
Don't feel like updating the whole rom completely, just the baseband to see if it solve signal issues!
Thanks.
....
I'm also mostly interested in the baseband update. Is that captured in a nandroid update or does one need to use a flashing utility to update that?
htc2364 said:
Can someone please make a flashable zip of the new baseband/modem available in the new update.
Don't feel like updating the whole rom completely, just the baseband to see if it solve signal issues!
Thanks.
....
Click to expand...
Click to collapse
Please I would also appreciate if someone could do this. Many of us who have attempted the update had it fail and are now left with phones that only boot into recovery or S/W Update...
So your device is unusable? It's ok as long as you can get into recovery your ok....
Sent from my LG-P999 using XDA Premium App
Is it even a new baseband? Yeah, the date is more recent but the rest of the baseband version string is exactly the same... Mentioned it in the other thread but no one replied.
Wow, Sumpter SC! Not too far from Walterboro...
r4d14n7 said:
Is it even a new baseband? Yeah, the date is more recent but the rest of the baseband version string is exactly the same... Mentioned it in the other thread but no one replied.
Click to expand...
Click to collapse
Not sure, I'm hoping it is!
....
How does one pull / push the baseband?
dkb218 said:
Wow, Sumpter SC! Not too far from Walterboro...
Click to expand...
Click to collapse
Hour and a half or so
Sent from my LG-P999 using Tapatalk
I guess this is harder to do than I thought!
coming from the Vibrant and having so many leaks Scrizz had it up almost immediately after the leak!
I guess I gotta wait!
....
Last I checked they had it but they won't publish it UNTIL they get a good working stock baseband.
Right now the best bet is to flash the official via the LG updater, then reflash whatever rom you want. It's been tested to work correctly with CM7.
They are just making sure they don't screw everyone with a bad flash
Asus Transformer 3.1 pwnd
www.MiiWiiChat.com
www.SnapSiteAdmins.com
player911 said:
Last I checked they had it but they won't publish it UNTIL they get a good working stock baseband.
Right now the best bet is to flash the official via the LG updater, then reflash whatever rom you want. It's been tested to work correctly with CM7.
They are just making sure they don't screw everyone with a bad flash
Asus Transformer 3.1 pwnd
www.MiiWiiChat.com
www.SnapSiteAdmins.com
Click to expand...
Click to collapse
Gotcha thanks
....
player911 said:
Last I checked they had it but they won't publish it UNTIL they get a good working stock baseband.
Right now the best bet is to flash the official via the LG updater, then reflash whatever rom you want. It's been tested to work correctly with CM7.
They are just making sure they don't screw everyone with a bad flash
Asus Transformer 3.1 pwnd
www.MiiWiiChat.com
www.SnapSiteAdmins.com
Click to expand...
Click to collapse
i can confirm this method worked for me. flashed official, then the rooted official and i'm still showing the 7-15 baseband.
crazythunder said:
i can confirm this method worked for me. flashed official, then the rooted official and i'm still showing the 7-15 baseband.
Click to expand...
Click to collapse
So have you noticed any difference in signal/ signal stability?
....
Sumter is not spelled with a "p". It's 81 miles from Walterboro.
Sent from my LG-P999 using XDA Premium App
Is full data wipe necessary to flash from CM7 to Froyo to OTA?
Sent from my LG-P999 using XDA Premium App
eric_mac said:
Is full data wipe necessary to flash from CM7 to Froyo to OTA?
Sent from my LG-P999 using XDA Premium App
Click to expand...
Click to collapse
Always full wipe when switching different roms. Don't have to only when flashing updates to a rom you already have.
Sent from my T-mobile G2 using Tapatalk
htc2364 said:
So have you noticed any difference in signal/ signal stability?
....
Click to expand...
Click to collapse
i never get above edge in my house. i'm on the border of buffalo right by lake erie. i can see canada, so i'm also on the edge of tmo's signal. outside my home, i would sometimes get 4g.. and that is still the same. throughout the city, i get 4g most everywhere. maybe it improves others signal strength. and maybe it improves battery life. but my phone is plugged in alot, so hard to comment on that. all in all, i guess i answered none of your question lol. sorry.
crazythunder said:
i never get above edge in my house. i'm on the border of buffalo right by lake erie. i can see canada, so i'm also on the edge of tmo's signal. outside my home, i would sometimes get 4g.. and that is still the same. throughout the city, i get 4g most everywhere. maybe it improves others signal strength. and maybe it improves battery life. but my phone is plugged in alot, so hard to comment on that. all in all, i guess i answered none of your question lol. sorry.
Click to expand...
Click to collapse
Lol, thanks anyways!
....
eric_mac said:
Is full data wipe necessary to flash from CM7 to Froyo to OTA?
Sent from my LG-P999 using XDA Premium App
Click to expand...
Click to collapse
Just do a Nandroid backup of your current config. Restore a stock Nandroid. Update using the LG updater. Then restore your CM7 backup.
Time consuming process but it'd work. You'd be back using your existing CM7 config and the new Baseband.
hey guys i just recently bought and unlocked my skyrocket...the phone has been working great for a couple weeks now the battery randomly shuts off and i get a black screen with a vibrate when trying to boot phone up. I installed the Juggernaut ROM onto this phone and it works like a charm. I even bought a new battery and it worked for a day and now back to square 1. I even tried my battery from SGS 4G and that started the phone. What exactly is wrong? Rom or battery?
DrKnyght said:
hey guys i just recently bought and unlocked my skyrocket...the phone has been working great for a couple weeks now the battery randomly shuts off and i get a black screen with a vibrate when trying to boot phone up. I installed the Juggernaut ROM onto this phone and it works like a charm. I even bought a new battery and it worked for a day and now back to square 1. I even tried my battery from SGS 4G and that started the phone. What exactly is wrong? Rom or battery?
Click to expand...
Click to collapse
b4 the Juggernaut ROM, was it working as out of th box? If it was, then I'd go back to original configuration.
Elpidio said:
b4 the Juggernaut ROM, was it working as out of th box? If it was, then I'd go back to original configuration.
Click to expand...
Click to collapse
it was working before i rooted and flashed Juggernaut ROM this battery and black screen problem only started happening recently
Odin back to stock and use it for a few days then try flashing Sky Jelly Bean. I've had no issues with Sean's JB!
Why are you using a really old t989 Rom?
Sent from my SAMSUNG-SGH-I727 using Tapatalk 2
artbybart said:
Odin back to stock and use it for a few days then try flashing Sky Jelly Bean. I've had no issues with Sean's JB!
Click to expand...
Click to collapse
i unlocked and rooted it so i can use it on tmobile if i put it back to stock i wont be able to use it unless i put back to stock and use Sky Jelly Bean and @crazyd it was the rom most suggested in the skyrocket radio thread
DrKnyght said:
i unlocked and rooted it so i can use it on tmobile if i put it back to stock i wont be able to use it unless i put back to stock and use Sky Jelly Bean and @crazyd it was the rom most suggested in the skyrocket radio thread
Click to expand...
Click to collapse
Use a newer Sr Rom. That Rom you have is super old gb.
Sent from my SAMSUNG-SGH-I727 using Tapatalk 2
xcrazydx said:
Use a newer Sr Rom. That Rom you have is super old gb.
Sent from my SAMSUNG-SGH-I727 using Tapatalk 2
Click to expand...
Click to collapse
ok which rom would you suggest as i am having battery problems and i like the look of juggernaut anything similar to that
DrKnyght said:
ok which rom would you suggest as i am having battery problems and i like the look of juggernaut anything similar to that
Click to expand...
Click to collapse
I don't even remember what juggz looks like. It's a year old gb Rom. Try an ics Rom if you want stability and a newer os. Sky-ics, mohans embryo, to name a couple.
Sent from my SAMSUNG-SGH-I727 using Tapatalk 2
xcrazydx said:
I don't even remember what juggz looks like. It's a year old gb Rom. Try an ics Rom if you want stability and a newer os. Sky-ics, mohans embryo, to name a couple.
Sent from my SAMSUNG-SGH-I727 using Tapatalk 2
Click to expand...
Click to collapse
i restored back to odin and im trying to charge the battery but i keep getting the battery disconnected icon...is it possible i have a defective usb port?
DrKnyght said:
i restored back to odin and im trying to charge the battery but i keep getting the battery disconnected icon...is it possible i have a defective usb port?
Click to expand...
Click to collapse
Doesn't seem likely if you just performed an Odin to stock.
Sent from my SAMSUNG-SGH-I727 using Tapatalk 2
cdshepherd said:
Doesn't seem likely if you just performed an Odin to stock.
Sent from my SAMSUNG-SGH-I727 using Tapatalk 2
Click to expand...
Click to collapse
it is a possibilty seeing as i had to move my sdcard to another phone to get stock rom to run...i thought that would fix the problem but it seems it didnt and now im getting this battery disconnected icon every few seconds...i dont know what happened it was working fine for a couple weeks now this
DrKnyght said:
it is a possibilty seeing as i had to move my sdcard to another phone to get stock rom to run...i thought that would fix the problem but it seems it didnt and now im getting this battery disconnected icon every few seconds...i dont know what happened it was working fine for a couple weeks now this
Click to expand...
Click to collapse
Are the battery contacts all dirty, bent, or something look wrong with them?
Restoring to stock makes no change meaning that the problem is with the phone itself or something. Maybe you had messed it up by doing something wrong while flashing or... ))
I think what better for you is that you should contact your carrier and have them replace your phone. This will not be a problem as you've just got it.
Just tell them exactly what happens to the phone, but don't tell them that the phone used to be rooted.
When you got your replacement, pm me inbox, I'm gonna show you how to install CMW, and then go straight ahead to Jelly Bean which is the ROM I'm running right now. Since you said your phone was unlocked, I think even if you use your stock ROM, you still are able to use T-Mobile SIM card or any others. ( But I was told by an ATT agent that the phone needed to be used at least 3 months or something in order to get the code to unlock it)
The reason I'm using custom ROMs is that I can do a wifi tether whenever I want, and be able to run the most recent Android version as soon as it is released.
.
So I did a full clean wipe, twice just to be sure.
Flashed RC1 and everything seemed to be going great at first. Then I noticed that the signal is dropping in and out. (I live in San Diego) It won't hold a signal for any reasonable amount of time. So it drops from 4G LTE going off. I've rebooted. At a bit of a loss. I'm operating on ATT.
Should I try to reflash? I was previously running CM 10.0 with no serious issues.
I've made sure the priority is LTE/GSM
Any help would be greatly appreciated!
May be your APN? What radio are you using?
Sent from my Nexus 7 using XDA
Same happened to me. Reflashed the modem problem fixed.
Sent from my SAMSUNG-SGH-I727 using xda app-developers app
I had it on ATT Phone and then switched it to ATT LTE. Issue wasn't resolved. I tried the other APNs as well. Same result.
For poops and giggles I flashed the most recent nightly 05/06 and still had the same issue.
May seem silly to ask, but how do you flash the modem? That sounds like it could be a solution.
Edit: Ermm what radios did you flash to fix the problem?
Looking more like you need the latest UCMC1 radio. Happened with a big kernel update in the nightlies, since this is getting closer to stable, I'm sure we'll see this problem more as more people start updating.
http://forum.xda-developers.com/showpost.php?p=40731838&postcount=594
LoSt180 said:
Looking more like you need the latest UCMC1 radio. Happened with a big kernel update in the nightlies, since this is getting closer to stable, I'm sure we'll see this problem more as more people start updating.
http://forum.xda-developers.com/showpost.php?p=40731838&postcount=594
Click to expand...
Click to collapse
Yea, I flashed that one after I found it on a post about the radios. It fixed the problem to an extent. However I'm getting much weaker signal than usual (although this could be the bars not displaying properly maybe, I don't want to jump immediately to a conclusion) and also am getting the data bars greyed out which means it's not.
Do you recommend reflashing the radio again?
b2tracken said:
Yea, I flashed that one after I found it on a post about the radios. It fixed the problem to an extent. However I'm getting much weaker signal than usual (although this could be the bars not displaying properly maybe, I don't want to jump immediately to a conclusion) and also am getting the data bars greyed out which means it's not.
Do you recommend reflashing the radio again?
Click to expand...
Click to collapse
b2tracken,
Just wanted to say thanks for your post here and that I'm experiencing the same exact thing. Yesterday I upgraded my skyrocket from an old ICS install to the latest 4.2.2 with CM 10.1, coincidentally right when this RC1 came out, so I quickly upgraded from M3 to RC1 last night. This morning I noticed that something was up with the radio and read your post. I flashed the radio to UCMC1 like you probably did and now I'm getting a connection, but about half as strong (in bars) as before the whole upgrade. Really no complaints yet - it hasn't hindered phone calls or mobile data connection - but I would be interested to find out if there is anything I can do to improve it, or configure it properly. I'm a big noob when it comes to phones.
Thanks,
Chad
wickm said:
b2tracken,
Just wanted to say thanks for your post here and that I'm experiencing the same exact thing. Yesterday I upgraded my skyrocket from an old ICS install to the latest 4.2.2 with CM 10.1, coincidentally right when this RC1 came out, so I quickly upgraded from M3 to RC1 last night. This morning I noticed that something was up with the radio and read your post. I flashed the radio to UCMC1 like you probably did and now I'm getting a connection, but about half as strong (in bars) as before the whole upgrade. Really no complaints yet - it hasn't hindered phone calls or mobile data connection - but I would be interested to find out if there is anything I can do to improve it, or configure it properly. I'm a big noob when it comes to phones.
Thanks,
Chad
Click to expand...
Click to collapse
The only other thing that I have changed is going and changing the APN under mobile networks to ATT LTE from ATT Phone. I'm getting about half signal also and intermittent issues with it greying out. (They seem to have not been very prevalent.) Seems that I'm not the only one with the issue which is fortunate. Give that a shot. Hopefully it gets worked out in the next release.
Att ucmc1 apn
SO I've uploaded the original UCMC1 stock ATT APN, you can just create a new APN and set it like these images.
Also wondering, after you cleanup (format data, system, cache, dalvik cache), No reboots, you do the next in the following order:
1-flash UCMC1 Radio
2-flash CM10.1 ROM (I'm still on 04/23 and everything works: http://forum.xda-developers.com/showthread.php?t=2272261)
3-flash gapps from 20130301 (http://goo.im/gapps)
Good luck,
Don't forget to hit THANKS if I helped you
Having the same exact issue, I've done everything stated here, only thing i did differently was updated the radio after CM.
Well the problem came back randomly with RC2 to an extent.
Now everything is showed as greyed out and no connection available including wifi.
Anybody have a clue on this?
b2tracken said:
Well the problem came back randomly with RC2 to an extent.
Now everything is showed as greyed out and no connection available including wifi.
Anybody have a clue on this?
Click to expand...
Click to collapse
Use a sock based Rom. 4.2 drops data and has all sorts of issues.
Sent from my SAMSUNG-SGH-I727 using Tapatalk 2
In case it was missed, strait from the horse's mouth:
http://forum.xda-developers.com/showpost.php?p=41349665&postcount=2648
topprospect said:
+1. UCMC1 should be used on all current CM10.1 builds. Any older radios will cause major problems with the newer JB-based blobs we use in CM10.1 past around 4/24.
One caveat: I don't know about Rogers users, sorry guys. If you have an official JB release from Samsung, you should use that radio. (Otherwise you will have to use UCMC1)
Click to expand...
Click to collapse
UCMC1 Radio: You must have the latest radio/modem installed or you will experience problems.
http://forum.xda-developers.com/showthread.php?t=2228292
LoSt180 said:
In case it was missed, strait from the horse's mouth:
http://forum.xda-developers.com/showpost.php?p=41349665&postcount=2648
UCMC1 Radio: You must have the latest radio/modem installed or you will experience problems.
http://forum.xda-developers.com/showthread.php?t=2228292
Click to expand...
Click to collapse
It seems no matter what I have issues. Now I'm having more issues with RRs and general crashes that force me to clear completely. I updated the radios but still had issues after. Almost thinking going back to square 1 and rerooting etc etc.
b2tracken said:
It seems no matter what I have issues. Now I'm having more issues with RRs and general crashes that force me to clear completely. I updated the radios but still had issues after. Almost thinking going back to square 1 and rerooting etc etc.
Click to expand...
Click to collapse
No need to root to flash roms.
Sent from my SAMSUNG-SGH-I727 using Tapatalk 2
xcrazydx said:
No need to root to flash roms.
Sent from my SAMSUNG-SGH-I727 using Tapatalk 2
Click to expand...
Click to collapse
I'm aware. I'm already rooted, I just wanted to know if it's worth it to go back to stock then try to redo everything.
You said re-root. You don't need root to flash roms.
And probably not, cm is all busted right now anyways and data drops, reboots and all the other stuff is gonna happen regardless.
xcrazydx said:
You said re-root. You don't need root to flash roms.
Sent from my SAMSUNG-SGH-I727 using Tapatalk 2
Click to expand...
Click to collapse
Well I would have to reroot if I took it back to stock. Thus the reroot etc etc
b2tracken said:
Well I would have to reroot if I took it back to stock. Thus the reroot etc etc
Click to expand...
Click to collapse
No you wouldn't
Sent from my SAMSUNG-SGH-I727 using Tapatalk 2
b2tracken said:
It seems no matter what I have issues. Now I'm having more issues with RRs and general crashes that force me to clear completely. I updated the radios but still had issues after. Almost thinking going back to square 1 and rerooting etc etc.
Click to expand...
Click to collapse
What nightly are you on? Anything after 4/23 (including the RC's) will have a lot of those instability issues. The developers are working hard to fix it if you want to read the development thread.
system dump + firmware
https://mega.co.nz/#F!isRQhTYL!KrGr9yLRlxI9CkReLxMBiQ
not flashable. for chef / devs
LE; seems i made a mistake and base won't boot. i misplaced a lib
here you go: replace old one with this one
https://dl.dropboxusercontent.com/u/13605628/libsync.so
Thanks baad!!!!
:thumbup:
Thanks very much! I hope this build solves data issue
Also, are the apps under /data/preload/ dumped as well? Like sound recorder or flash light or something which are very useful?
good lookin bro...
Sent from my HTC One using XDA Premium 4 mobile app
This doesn't have lte support does it?
Sent from my HTC One using Tapatalk 4
So if this is whats rolling out to customers, I assume it's the final 4.3 Sense version we have been waiting all month for ?
mobb315 said:
This doesn't have lte support does it?
Sent from my HTC One using Tapatalk 4
Click to expand...
Click to collapse
sigh ....
Its system dump.
Try InsertCoin from baad for best rom experience
dragonesdenano said:
Its system dump.
Try InsertCoin from baad for best rom experience
Click to expand...
Click to collapse
Said like a true gentleman
CheesyNutz said:
sigh ....
Click to expand...
Click to collapse
I was wondering the same thing. A real answer would have been great.
EDIT: Seems like after a while LTE decided to come on.
flashed Firmware
started back up fine after firmware flash but when i tryed to go into recovery from bootloader phone wouldnt start up. Tryed reboot from bootloader and phone wont start at all but i still can get into bootloader . anyone else have this problem. Seems off because the phone did start up fine after i flash the firmware. Seem from other post that i needed to refresh my rom for camera to work so thats what i was going to do when this happen
Got it started back up after powering down from bootloader . it looks like i have to reflash recovery..anyone else had to do this?
shanedd1123 said:
started back up fine after firmware flash but when i tryed to go into recovery from bootloader phone wouldnt start up. Tryed reboot from bootloader and phone wont start at all but i still can get into bootloader . anyone else have this problem. Seems off because the phone did start up fine after i flash the firmware. Seem from other post that i needed to refresh my rom for camera to work so thats what i was going to do when this happen
Got it started back up after powering down from bootloader . it looks like i have to reflash recovery..anyone else had to do this?
Click to expand...
Click to collapse
This post is for developers ... you not going to get much help here
but i can tell you this ... you would not normally flash the whole firmware zip
you edit it in 7zip and remove the recovery.img and hboot if you don't want it updated
some also remove the boot.img it seems to break the camera. Just a FYI
I flashed this and for first time flashing firwmares I lost root and now instead of 3G icon its showing ATT 4g Icon lol!
Can anyone extract out the camera apk for me from this firmware so I can compare to previous. Thank you devs.
maxrdlf95 said:
I flashed this and for first time flashing firwmares I lost root and now instead of 3G icon its showing ATT 4g Icon lol!
Click to expand...
Click to collapse
obviously
Stock dump is not rooted and if its 709.2 (asia?) then it will have WWE style icons not ATT specific
poondog said:
obviously
Stock dump is not rooted and if its 709.2 (asia?) then it will have WWE style icons not ATT specific
Click to expand...
Click to collapse
709 is TW m7_u version
And guys, These are the preload apps from the OTA package, including Sound Recorder and a lot of TW stuff.
Link:
http://d-h.st/D9z
Here you can read what the changes are:
HTC One receiving Update in Taiwan
does the main rom.zip contain firmware or has been removed?