Hi all,
I tried a lot to unlock bootloader Xperia mini ST15i but nothing happens...
I was used the way quangnhut123 SE tool for unlocking & relocking bootloaderb but when I tried there is always shows an error
I have attached screenshot here.... Oh! I can't attach screenshot because I have only three posts....Please somebody help me on this...
Windows 7 32 Bit
Installed dotnet 4.0
the error starting like this
Unhandled exception has occured in your application....
Thanks In advance
Related
Hi alll,
I have orange spv m500,when i tried to update my rom it failed and got stuck in bootloader mode.And when i saw some posts they were written that 'download mtty 1.42'but in my pc on opening mtty usb option is not available Any one plzzzzzzzzzz Help I am gonna cry........
Welcome to the forums!
I suggest you read the MTTY thread very carefully!
Just follow every step and you'll be fine.
Cheers,
EC
i tried every step plzzz help me
Please tell me exactly what went wrong.
Did you fail installing the drivers?
i just tried to change my os of my pocket pc and it asked for an update for my rom and agreed for that..then after sometime when i switch on my pocket pc i said serial on top and v1.00 at the bottom....please help me .....thank you in advance
It would be very helpful if you let us know what HTC device you have
Hey.First of all,I don't know much about theese rom update things and I know that i'm not good at English.
PPC: HTC Touch Elf (Windows 6.0)
PC OS: Windows 7
I want to install Windows 6.5 on my Elf.I've read some guides for that.I've downloaded that for unlocking CID: http://forum.xda-developers.com/showthread.php?t=320155 .I tried it like 15 times and got "Error 260" on all (i'm sure that i followed directions right).Then tried a few more CID Unlocker,but they all ended up to Error 260.
For example,on that unlocker,when it starts to upgrade my phone's screen turns off for 2 seconds,i'll hear the disconnect sound from my computer,and after my screen comes back with tricolor upgrade will stuck on %0 and i'll get Error 260 again.
I've tried with 3 different USB data cables but it's still same.And i'm deactivating my firewall/antivirus program before install...
Note:I've already searched on forums,but that didn't work.
hello! friends..I desperately need your help..I'm using Sony Xperia ZR ,running 4.3. Firmware version 10.4.1.B.0.101.
I just want to root my device that's all..I have tried the procedure described in this site using runme_win.bat file...even many times...But everytime it's just showing "waiting for device" command in the prompt..though i have installed latest Sony PC companion...turned on debugging mode and all other stuffs..but it's not working...so pls help me friends..I would be grateful to you,,,Thank u...
Try it from here :
http://forum.xda-developers.com/showthread.php?t=2427995
Hello xda it's my first post here
Recently i tried to install on my xperia z5 android 6 by following these steps from the link below:
http ://xperiafirmware.com /8-firmware/108-sony-xperia-z3-e6553 (delete space after http)
In detail, after downloaded Android 6.0 - firmware 32.1.A.1.185 i tried to install it into phone from flashmode with flashtool as tutorial shows.
In flashtool after:
"processing system.sin
Checking header
Flashing data"
the program stacked there the green bar didn't load at all and after 6 hours passed it popes up an error message and phone's disconnected.
After that the phone is acting like video below(rebooting all the time and says "software update fail make sure your phone is connected to computer and try again" )
https ://www .youtube.com/watch?v=Ou0v0ifxzZk (delete space after https and after www)
Any suggestions what's going on ? Is there any way i can fix it?
GxMarkos said:
Hello xda it's my first post here
Recently i tried to install on my xperia z5 android 6 by following these steps from the link below:
http ://xperiafirmware.com /8-firmware/108-sony-xperia-z3-e6553 (delete space after http)
In detail, after downloaded Android 6.0 - firmware 32.1.A.1.185 i tried to install it into phone from flashmode with flashtool as tutorial shows.
In flashtool after:
"processing system.sin
Checking header
Flashing data"
the program stacked there the green bar didn't load at all and after 6 hours passed it popes up an error message and phone's disconnected.
After that the phone is acting like video below(rebooting all the time and says "software update fail make sure your phone is connected to computer and try again" )
https ://www .youtube.com/watch?v=Ou0v0ifxzZk (delete space after https and after www)
Any suggestions what's going on ? Is there any way i can fix it?
Click to expand...
Click to collapse
Your given link shows that you have installed Z3+ fw.
Try to download your model FTF and then flash it with flashtool again.
hi, i was in the same trouble before, i was sacaried with my new super expensive brick jajaja, but i found the solution, just try to flash the generic fimeware and marking all de wipe marks in flash tool, after few attempts it flash the rom and i can enter the phone, if you see the green bar doesn't began to go just desconect your phone and try it again. I solve it in my 4th atempt
PD: forget my english please, i wish it can help you.
Hi, Also got up on the same problem as yours as i've downloaded and flashed wrong FTF model for for my Z5 Dual (E6683).
Just performed the re-flash using the latest Flashtool and the correct FTF for the model, completed flashing and device has returned to normal operation.
Thanks for your help
Thanks all for your help guys rly appriciated , i solve the problem with your help thank you all
I have the exact same problem, only it won't do anything when I press the volume down and connect it to the pc. Flashtool won't detect the device. Does anybody have an idea?
I have an xperia z2 tablet from verizon bought from ebay, i tried to flash a rom on it but got a lot of errors. the tablet now shows a message saying "upgrade faild pleas connect to a computer" and when i do i get another message saying "upgrading, do not disconnect from pc". and it stays for ever.
i tried pc companion, and flash tool and nothing seems to work
any help please??
im currently out of the united states
Hi !
Please post a question only once , thanks for understanding
Original thread here
Thread closed