Related
Okay, so my dad wanted a phone for upgrade. My sister's line had the upgrade.
He got a phone, didn't like it, so I called and got them to put the upgrade back on.
My mom calls to order the new phone, and the dumbass VZW rep says to call from the new phone when we get it and activate it on my sister's line, then to switch phones.
I called on the new phone, activated it on my sister's line, then went online to switch the phone, and it wanted me to "add a BB data plan." I said, "eff that."
I called Verizon Customer Service and the gentleman I talked to got my Dad's line set up with the new phone he ordered, however, we could not get my sister's D2G back on the account.
I am slightly concerned as it is currently rooted and running a custom rom, (Fission, I believe.) It failed activation 5 times in a row. So I booted up D2 Bootstrap, and restored back to when I rooted the phone. Still failed activation.
Anyone run into a problem like this? Any ideas?
Hmm. This is weird. Have you signed onto the account thorugh the verizon website to check and make sure the correct phone is on there? That would be my next step. And if it is.
Near the bottom there should be an option such as "Activate or change device." See what you can change in there. Such as readding the MEID for the phone and everything else.
If that doesnt' work. Make sure the phone is unrooted. when you activate. I don't know what all verizon has changed with there services but it's worth a shot.
Hope atleast some of this stuff helps. If not.. you can alway's just go to a verizon store and if worst comes to worse your sister would have to get a new phone. Just be sure to uninstall droid bootstrapper z4root(or w/e you use) and take the SD Card out. GL!!!!
DolbyFighter said:
Okay, so my dad wanted a phone for upgrade. My sister's line had the upgrade.
He got a phone, didn't like it, so I called and got them to put the upgrade back on.
My mom calls to order the new phone, and the dumbass VZW rep says to call from the new phone when we get it and activate it on my sister's line, then to switch phones.
I called on the new phone, activated it on my sister's line, then went online to switch the phone, and it wanted me to "add a BB data plan." I said, "eff that."
I called Verizon Customer Service and the gentleman I talked to got my Dad's line set up with the new phone he ordered, however, we could not get my sister's D2G back on the account.
I am slightly concerned as it is currently rooted and running a custom rom, (Fission, I believe.) It failed activation 5 times in a row. So I booted up D2 Bootstrap, and restored back to when I rooted the phone. Still failed activation.
Anyone run into a problem like this? Any ideas?
Click to expand...
Click to collapse
I did a MASTER RESET this morning and ran into the same problem... Activation failed several times but this is what I did and I was able to activate it:
Went to settings>Wireless & Networks>Mobile Networks>Network Mode and changed it from GLOBAL to CDMA. Also changed System Select (under CDMA settings) to AUTOMATIC. Dialed *228 option 1 and ACTIVATION WAS SUCCESSFULLY!!!!
Hope it does it for you too... Give it a try and let us know if it works...
02Luis02 said:
I did a MASTER RESET this morning and ran into the same problem... Activation failed several times but this is what I did and I was able to activate it:
Went to settings>Wireless & Networks>Mobile Networks>Network Mode and changed it from GLOBAL to CDMA. Also changed System Select (under CDMA settings) to AUTOMATIC. Dialed *228 option 1 and ACTIVATION WAS SUCCESSFULLY!!!!
Hope it does it for you too... Give it a try and let us know if it works...
Click to expand...
Click to collapse
Just know...whether your SIM Card is present or not...doing a *228 will automatically switch you to GSM mode. I find I seem to get better signal with turned on, tried turning it off to conserve battery to no avail.
Hi,
I have a verizon lg Spectrum vs920 that I would like to use on android $55.00 cricket plan. I just recently got it flashed by a professional via remote flash. Everything seems fine on the phone. Checked the settings a million time. I am not a complete noob at flashing as I have done a lot of phones before. But my experience stops at Motorola Razr days. I haven't been in touch with the flashing market since than. I tried to do the phone myself but realized how far those phones has come.
Anyway, I tried to do a esn change but the phone itself has only IMEI number and cricket has to have MEID number. I tried to do a conversion using a ESN converter but initially I didn't get any result. So, I did the conversion with out the last number of the IMEI (read it somewhere, don't remember right now). I gave the Cricket rep the conversion result, they put it in to the system but the phone didn't work. So, I called back and talk to their tech support. According to them, phone won't work because it has a Sim card in it.
My questions to you guys is,
Has anyone actually ever used this phone with cricket service?
Can it be used with the Sim card in it?
As this phone won't dial *228 and you can not access the service menu, how do you activate this phone?
What exactly should I give the cricket rep when I call the next time.
I noticed the flash didn't set any sid,Nid number, could that be the problem?
I hate to spend another 15.00 and not get the phone going. Please let me know as much as you can about the activation process while I do a little more checking on the settings to see the problem could have been with the phone and not the activation process.
Thanks in advance.
Starting this October, PagePlus is offering 4G/LTE. Initially, I was assuming that all I need to do is plug in an LTE SIM card and activate account, and all will be peachy. However, it seems that by flashing phone to pageplus when it looks like a 3g device, I have messed up some radio settings, and verizon provisioning doesn't work, phone repeatedly keeps trying to call *228. Contrary to that, the other S3, which I didn't flash does not call at all, but instead pops up message box stating that the phone is being programmed, and after a couple minutes it's online . I do not remember what exactly did I program, it was awhile ago . Pageplus support knows that problem, and they are advising anybody who wants to go LTE to bring up an unflashed phone, saying the flashed one won't work
There are folks on kitty forums who offer remote de-flashing for 30 bucks, but no description what actually they do. Does anyone know what the process is? I can get my phone into QPST/DFS. Anyone knows what to do next?
UPDATE: see post #3 for solution
Can't help you with deflashing, but I will tell you that my local page plus vendor did mine for free and it only took him about 5-10 minutes. Maybe yours would do the same. Just a thought.
Sent from my SCH-I535 using Tapatalk
I guess it indeed is simple once you get to QPST mode. I used DFS to program, and the only setting I had to change was RuimConfig = RuimOnly (from NV_ONLY), see screenshot attached. Did not work on 4.0 firmware which I tried to use first, but worked fine on 4.2.1 and 4.1.2.
I got a sim card for my phone. All I did was verify that my phone was on RuimOnly (it already was), then I contacted PagePlus to activate my simcard (you're supposed to do this before you put it in your phone, they say) and they remotely programmed the phone, everything went smoothly. I have 4g data now, no "unflashing" required. Pretty easy. :good:
You put it on your phone before, you want this set up, then you can use the phone, so no problem.
Confirmed
I can confirm this works. I switched 2 samsung galaxy note 2 SCH-i605 from 3g to 4g.
The phones were originally flashed over to pageplus using wireless workshop. This puts them on pageplus as 3g phones. They drop the last digit of the MEID so it is a 14 digit code (3g) instead of 15 digit for 4G.
Here's what I did to get 4G LTE working.
Ordered a pageplus SIM card from pageplus
put the simcard in the phone
Used DFS to change RUIM from NV_Only to RUIM_only
Contacted Pageplus on chat and had them change my phone from 3g to 4g. I'm not sure exactly what they did, but I gave them the 15 digit MEID and the SIM ICCID (printed on the sim card you get, or look in settings, about device, details or something like that, you know where to look. ) The customer service rep said that what you need to tell them is you want to change a 3g phone to 4g. I told them it was back to standard firmware just to make them happy. It seems the RUIM changes is all you need.
Voila! Reboot the phone, give it a minute - it connects to 4G and then disconnects and looks like it has failed, but give it a minute and it comes up with 4G LTE and speedtest.net confirms it is blazing fast.
Loving it!
This is only required for a verizon phone that has been flashed in the past to make 3g work on Pageplus. Not needed on contract phones from verizon that are originally 4g.
Happy downloading!
galets said:
I guess it indeed is simple once you get to QPST mode. I used DFS to program, and the only setting I had to change was RuimConfig = RuimOnly (from NV_ONLY), see screenshot attached. Did not work on 4.0 firmware which I tried to use first, but worked fine on 4.2.1 and 4.1.2.[/QUOTE I did that but i do not have 4g and imwe in a 4g coverage area. using a mxx xt912. any help is appreciated
Click to expand...
Click to collapse
Gift for a friend
hi everyone,
I have a few questions based on my circumstances. I just deactivated a S3 Verizon from PagePlus which was flashed to 3g. I would like to hand my phone off to a friend as he's running a Droid X (!).
1. From what I understand to "unflash" I need to use DFS (cdmatool.com) and set Ruim config to RuimOnly. However, I believe the phone needs to be in QPST mode? I'm not entirely sure how to do this. Can someone point me in the right direction?
2. Since I already deactivated the phone, when my friend tries to re-activate on pageplus (with a new SIM), do we need to contact PP and tell them this device is now 4g?
3. Does it matter that I have a custom ROM running 4.3? I don't think so, but would like confirmation.
I really don't want to mess up this gift.
Thanks for any and all advice!
Dapeche said:
1. From what I understand to "unflash" I need to use DFS (cdmatool.com) and set Ruim config to RuimOnly. However, I believe the phone needs to be in QPST mode? I'm not entirely sure how to do this. Can someone point me in the right direction?
Click to expand...
Click to collapse
In general, this is done via USBSettings dialog, see if this thread helps you to get this menu enabled: http://forum.xda-developers.com/showthread.php?t=2227576
I have a i605 currently flashed to page plus 3g can't write with dfs without spec and I can't seem to get it can anybody point me in the right direction
I'm dumb figured it all out except page plus they keep saying I have to go to a dealer I said I am no longer flash but they keep telling to have a dealer manually flash it.....?
Update got everything working once I was in ruim only I called them at told them I had two phones and gave them the full imied as my second phone then the iccid and voila activation was a breeze
Hey M8 crew!
New to the M8, just bought the phone from swappa. Apparently it has root/s-off/some lollipop build installed on it. Clean ESN.
Took it into verizon to activate it on my line, but the sim doesn't appear to activate as they expect. It detects that it was inserted, says to reboot, after reboot still says no service, and never performs any activation. Verizon rep was claiming that the rom was causing the failures, and it does appear to likely be software related if it is never launching the activation. VZW tech support was no help other than saying it may take up to 12 hours to activate the sim (bs meter going off). Spent 2 hours in the store trying to get it to activate, saying everything was fine on their end. Tried a couple sims in store to rule out a bad sim. Have even tried the tape on the sim trick to see if that might have something to do with it.
Has anyone ever seen / heard of this sort of situation before and have any idea of how to fix it?
Would a stock RUU flash help out in anyway?
Is it because it is not a verizon rom that the activation is not happening? Would I somehow be able to use a different verizon phone to activate the sim, then put it in my phone and have service start working?
Any ideas?
nectur said:
Hey M8 crew!
New to the M8, just bought the phone from swappa. Apparently it has root/s-off/some lollipop build installed on it. Clean ESN.
Took it into verizon to activate it on my line, but the sim doesn't appear to activate as they expect. It detects that it was inserted, says to reboot, after reboot still says no service, and never performs any activation. Verizon rep was claiming that the rom was causing the failures, and it does appear to likely be software related if it is never launching the activation. VZW tech support was no help other than saying it may take up to 12 hours to activate the sim (bs meter going off). Spent 2 hours in the store trying to get it to activate, saying everything was fine on their end. Tried a couple sims in store to rule out a bad sim. Have even tried the tape on the sim trick to see if that might have something to do with it.
Has anyone ever seen / heard of this sort of situation before and have any idea of how to fix it?
Would a stock RUU flash help out in anyway?
Is it because it is not a verizon rom that the activation is not happening? Would I somehow be able to use a different verizon phone to activate the sim, then put it in my phone and have service start working?
Any ideas?
Click to expand...
Click to collapse
If the phone was used on another carrier it might be stuck in a non lte/CDMA mode. Flash stock vzw ruu. Do a factory reset. Go into mobile settings and make sure it's set to global. Then see if default network is set to vzw. Then check provisioning.
That did it. Thanks!
nectur said:
That did it. Thanks!
Click to expand...
Click to collapse
Np...bought an m8 for my dad a couple months back and same thing happened. I finally realized it was used on a different carrier.
I spent over 2 hours last nite with att reps trying to enable numbersync to work between the s3 and s8 phones.. the s8 phone is an unlocked phone (not bought through att), only to find out today via another rep that the phone must be bought via ATT or truly att branded.. which i find a bit absurd, as i think others have succeeded..
Is this really the case.. anyone know or have this same experience?
Specifically this error would appear after going through the get started via the watch then on the phone (after creating a seperate accessid):
Oh darn! We can't enable device syncing on this phone. Want to find out more? Call us at 800.331.0500 so we can help.
(MSSITWINREL12)
If this turns out to really be an unlocked phone issue (which is a bit ridiculous), i think i read that it might be possible to take my sim card out of that phone and put in another phone that is att branded, enable number sync then put the card back in my s8 and go from there
Thanks
The phone does not have to be AT&T branded, I have a T-Mobile Note 4 and until the last update numbersync worked. Updated my S# over the weekend after avoiding it for as long as possible, and now numbersync is no longer an option on my S3.
pasco8525 said:
The phone does not have to be AT&T branded, I have a T-Mobile Note 4 and until the last update numbersync worked. Updated my S# over the weekend after avoiding it for as long as possible, and now numbersync is no longer an option on my S3.
Click to expand...
Click to collapse
Thanks for the reply.. your saying you had an unlocked tmobile phone on att and it was working till a recent tizen update then?
The rep further told me to take the phone to the best buy samsung experience store and have it flashed with the att firmware to get around this issue.. maybe not needed then? (which i assume means a wipe and possibly lose my unlock)
I had the same problem with my Gear S3 and my Axon 7. Worked on for a solid hour with an ATT rep in store and another hour on phone with someone else. Finally it was determined that it wouldn't work on an unlocked phone. Haven't tried the sim swap with an ATT branded device yet, but if I do, I'll let you know if it works.
karlkarloff said:
I had the same problem with my Gear S3 and my Axon 7. Worked on for a solid hour with an ATT rep in store and another hour on phone with someone else. Finally it was determined that it wouldn't work on an unlocked phone. Haven't tried the sim swap with an ATT branded device yet, but if I do, I'll let you know if it works.
Click to expand...
Click to collapse
Spoke to an att rep again today who called me.. basically in my case the 950U1 s8 phone.. because its this model it wont work with numbersync they say.. they also contradicted the previous reps suggestion of taking the phone to the samsung experience place and having the att firmware flashed on it (or doing it at home).. saying it wont help.. that they need HD voice provisioned and it wont let them provision it (the phone wont).. they said swapping the sim card to a real att phone only may help for a short period, till the system does a sweep, sees a non att phone and reverts it (same with just adding the imei to the database).. There is also a good chance the recent update to either the s3 or the samsung s8 caused numbersync to do a detection for unlocked phones and not allow this (they indicated).
They said i could still try doing the firmware flash but it probably wouldnt work (i dug around online trying to find out which flash it would be and i didnt get too far, short of going to the store to do it at best buy samsung experience)
Really sucks, as the alternative, if i were that desperate to enable this feature (i dont think i am willing to go this far) would be to sell the old phones and get new att branded ones.. end up costing me the price of a new watch in the mix just to do that
markm75 said:
Spoke to an att rep again today who called me.. basically in my case the 950U1 s8 phone.. because its this model it wont work with numbersync they say.. they also contradicted the previous reps suggestion of taking the phone to the samsung experience place and having the att firmware flashed on it (or doing it at home).. saying it wont help.. that they need HD voice provisioned and it wont let them provision it (the phone wont).. they said swapping the sim card to a real att phone only may help for a short period, till the system does a sweep, sees a non att phone and reverts it (same with just adding the imei to the database).. There is also a good chance the recent update to either the s3 or the samsung s8 caused numbersync to do a detection for unlocked phones and not allow this (they indicated).
They said i could still try doing the firmware flash but it probably wouldnt work (i dug around online trying to find out which flash it would be and i didnt get too far, short of going to the store to do it at best buy samsung experience)
Really sucks, as the alternative, if i were that desperate to enable this feature (i dont think i am willing to go this far) would be to sell the old phones and get new att branded ones.. end up costing me the price of a new watch in the mix just to do that
Click to expand...
Click to collapse
.
When I first bought the watch it was for the numbersync feature. My first problem was even though the Samsung rep and the bestbuy rep said that it would work with my Note3, it did not. took several calls and many hours of trying to figure out the HD Voice (VOlte) provisioning. Bought a TMobile Note 4, rooted and rom'ed this worked to setup numbersync. the only problem was it would occasionally turn off numbersync, this occurred about once a month. Then if failed completely said that this line is not accceptabl;e for numbersync. this was after about six months. Discovered that it appeared to be age of firmware related, I was on a TM firmware that was several updates out of date. When I odin flashed the latest firmware numbersync worked again until the recent update to 3.0.0.1 on the gear firmware. Now I have the line not acceptable for numbersync again. I'm going to try to update firmware again to see if that works. If not I will probably look to change carriers to TM. will cost the price of a new watch, but will get me out of AT&Ts locked boot loader.
BTW, setting up numbersync on a different phone and switching back will not work, Tried several times and as soon as you turn on the phone that is not HD Voice capable with your SIM card in it the system sees it and turns off numbersync almost instantly. went throught that trying to get my Note 3 to work.
In all my experience the Samsung and AT&T reps were not a good resource. Numbersync does not appear to be a very popular feature and they do not know much about it.
pasco8525 said:
.
When I first bought the watch it was for the numbersync feature. .
Click to expand...
Click to collapse
My main motivation for it has been that.. someone correct me if this isnt accurate.. if your phone dies or is off.. when you dial someone from the watch or text them it will still show the cell phone phone number, not the watch phone number as it does now if bluetooth isnt on.
I'm in the process of gathering the files i need to do the att firmware flash and hopefully hd voice works then (as others say it has).
markm75 said:
My main motivation for it has been that.. someone correct me if this isnt accurate.. if your phone dies or is off.. when you dial someone from the watch or text them it will still show the cell phone phone number, not the watch phone number as it does now if bluetooth isnt on.
I'm in the process of gathering the files i need to do the att firmware flash and hopefully hd voice works then (as others say it has).
Click to expand...
Click to collapse
Yes, that is the whole point of numbersync. The watch uses the phones number not it's own.
Tried updating to the latest firmware and a ROM based on it. No luck still get a rather comical response "Oh darn! We can't enable device syncing on this phone. " worked until the tisen update.
There also seems to be confusion on numbersync with the att reps.. one person told me the watches dont need their own numbers.. that numbersync is all we need (but how would the watch make a call if the phone is off).. another said yes they need external numbers for number sync or solo
edit: i see your last post.. so the latest reps are correct then.... so they assigned us numbers and $10 access fees each with activation fees for no reason basically.. ugh
The watch has to have it's own number, that is it's address on the network. Without it numbersync would have no way to send calls to it. Same as with the LTE enabled iPads they could not make a call, but had to have an address on the cellular network.
Just a quick note...i too spent 3 hours in an AT&T store trying to get numbersync to work..., finally returned the S3 Frontier cancelled the number in it and left frustrated...i now have a GS8 unlocked on AT&T through my work...that is synced to a Verizon Gear S3 Classic lte and i simply use call forwarding with YouMail. If i do not answer my phone after 3 rings it gets sent to my watch and if I still do not answer then Youmail picks it up..If I call out or text with the watch separately then I just let my customers know that I have 2 numbers 1 for my cell and one for their watch. I just don't think AT&T is ready for the Numbnersync technology yet and they just don't care enough to train their own people on it, sad as it is a good promise...
Sent from my iPad using Tapatalk
pasco8525 said:
The watch has to have it's own number, that is it's address on the network. Without it numbersync would have no way to send calls to it. Same as with the LTE enabled iPads they could not make a call, but had to have an address on the cellular network.
Click to expand...
Click to collapse
I meant phone number.. are you saying phone number? After the rep said i didnt need a phone number for each watch, she credited me back the cost of the two lines and said just to contact them that they would enable the numbersync once i had the phones ready.. I'm assuming number means imei, which they still have in the system.
Yes each watch has to have it's own phone number. I believe this is another case of AT&T rep not understanding number sync.
I managed to firmware update so that i have the att bloatware (didnt even need reset, all software was kept).. i confirmed HD voice is working but WiFi calling throws an error to contact ATT.. hd voice was the key for numbersync.. however.. despite this.. and 2 hours on the chat line with ATT.. i still get an error when you do the s3's get started numsync and it opens the page on the phone.. the oops, device sync cant work with your phone (which went from a 950U1 to a 950U btw, which is good as well).. They escalated to another backend team, but i highly doubt they will get it working.. most likely they'll still complain that my phone (was) an unlocked phone, despite adding the att firmware to it.
markm75 said:
I managed to firmware update so that i have the att bloatware (didnt even need reset, all software was kept).. i confirmed HD voice is working but WiFi calling throws an error to contact ATT.. hd voice was the key for numbersync.. however.. despite this.. and 2 hours on the chat line with ATT.. i still get an error when you do the s3's get started numsync and it opens the page on the phone.. the oops, device sync cant work with your phone (which went from a 950U1 to a 950U btw, which is good as well).. They escalated to another backend team, but i highly doubt they will get it working.. most likely they'll still complain that my phone (was) an unlocked phone, despite adding the att firmware to it.
Click to expand...
Click to collapse
Update here.. i managed to get everything working by going with a new sim card.. wifi calling works now.. and i was able to complete numbersync setup.. the only remaining issue i have is that my callerid seems to be blocked on the receiving end.
markm75 said:
Update here.. i managed to get everything working by going with a new sim card.. wifi calling works now.. and i was able to complete numbersync setup.. the only remaining issue i have is that my callerid seems to be blocked on the receiving end.
Click to expand...
Click to collapse
With the Firmware did you have to go through the full process where you changed the CSC and flashed the ATT firmware? Currently I am running a Sprint phone that is unlocked an running the US Unlocked firmware. Even running the ATT firmware they still were not able to get HD Voice or WiFi calling working for me.
eaglerugby04 said:
With the Firmware did you have to go through the full process where you changed the CSC and flashed the ATT firmware? Currently I am running a Sprint phone that is unlocked an running the US Unlocked firmware. Even running the ATT firmware they still were not able to get HD Voice or WiFi calling working for me.
Click to expand...
Click to collapse
The full steps, or mostly full.. are here in this thread..
The short of it was that i only ran regular odin at first.. just did HOME_CSC (using the verizon firmware which covers all carriers).. then rebooted the phone and did all the check boxes and the regular CSC.. after rebooting nothing was wiped and att bloatware was there... at this point hd voice was working.. wifi calling wasnt.. so i went to the store, got a new sim card today, then wifi calling was working.. numbersync took the code on the phone without error.. however.. now i'm realizing it isnt really working.. when i turned the phone off, and texted, it showed my s3 phone number.. and my callerid is still botched.. i think att botched something in this whole process.. so yet another call to them needed.
markm75 said:
The full steps, or mostly full.. are here in this thread..
The short of it was that i only ran regular odin at first.. just did HOME_CSC (using the verizon firmware which covers all carriers).. then rebooted the phone and did all the check boxes and the regular CSC.. after rebooting nothing was wiped and att bloatware was there... at this point hd voice was working.. wifi calling wasnt.. so i went to the store, got a new sim card today, then wifi calling was working.. numbersync took the code on the phone without error.. however.. now i'm realizing it isnt really working.. when i turned the phone off, and texted, it showed my s3 phone number.. and my callerid is still botched.. i think att botched something in this whole process.. so yet another call to them needed.
Click to expand...
Click to collapse
Thanks. It sounds like the latest firmware they did seems to fix some of the issues from bringing a non-ATT phone over but does not resolve everything. It looks like I won't be able to do this though. ATT and the ebay seller are unable to clear the ICCID on my watch, I have to sadly do a return now.
Kinda unrelated, yet ATT was horrible even for normal Sammy phone/watch. After dumping ATT service/hardware for various reasons a few moths back... Sammy watch/phone from Verizon hardware/service works flawlessly. Am carrier neutral, but one works reliably, one didn't.
BTW, Sammy pay via watch hiccuped via ATT at times, yet works flawless via Verizon.
markm75 said:
The full steps, or mostly full.. are here in this thread..
The short of it was that i only ran regular odin at first.. just did HOME_CSC (using the verizon firmware which covers all carriers).. then rebooted the phone and did all the check boxes and the regular CSC.. after rebooting nothing was wiped and att bloatware was there... at this point hd voice was working.. wifi calling wasnt.. so i went to the store, got a new sim card today, then wifi calling was working.. numbersync took the code on the phone without error.. however.. now i'm realizing it isnt really working.. when i turned the phone off, and texted, it showed my s3 phone number.. and my callerid is still botched.. i think att botched something in this whole process.. so yet another call to them needed.
Click to expand...
Click to collapse
well 5 chat people later they finally fixed the unknown callerid issue.. apparently there is an internal back end feature for numbersync regarding it set to active and on.. both toggles were on.. the rep removed the "on" and now my callerid shows my number when calling from my phone (and from the watch when watch is in solo mode too).. everything works! :laugh: