[Q] Soft bricked need help its my freinds phone - Verizon Droid Charge

whenever i try to turn it on it gets the little phone followed with caution symbol followed with computer symbol it happened after tring to flash a recovery in odin a few times and kept failing and now whenever i try to flash stock rom from samsung or anything in odin it will say nand write fail
what am i supposed to do?

Go to imnuts.org
And download ee4 and pit file..
Run them at the same time.
I'm assuming that you know how to run odin.
And know to unzip the ee4
And so on..
Select PDA
SENT FROM THE DOG POUND

i downloaded ep4 and tried to flash it but i didnt use a pit and it said nand write fail

Removed!!
<ID:0/008> Added!!
<ID:0/008> Odin v.3 engine (ID:8)..
<ID:0/008> File analysis..
<ID:0/008> SetupConnection..
<ID:0/008> Initialzation..
<ID:0/008> Set PIT file..
<ID:0/008> DO NOT TURN OFF TARGET!!
<ID:0/008> Removed!!
<ID:0/008> Re-Partition operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
and its been pluged in everytime

i flashed tweaked 3.0 odin style and now it wont even show splash screen it only goes to download mode

jett1217 said:
i flashed tweaked 3.0 odin style and now it wont even show splash screen it only goes to download mode
Click to expand...
Click to collapse
Did yu put Yur battery back in after going to download mode?...and check the pit file box?
simply tweaked 3.0

of course i put my battery back in

jett1217 said:
of course i put my battery back in
Click to expand...
Click to collapse
Sounds like Yur doing a good job then...keep going
simply tweaked 3.0

Did you check Re-Partition and un-check Auto Reboot and F. Reset Time?
Click on Pit and add your Pit file.
Verify the MD5 checksum before you added the EP4 file into PDA. Bad downloads do happen sometimes.
Pull the battery to enter download mode then replace it before flashing. That nand write fail thing is what happens if you flash without the battery.

jett1217 said:
of course i put my battery back in
Click to expand...
Click to collapse
did you try a different USB cord or rebooting your computer? (I know it sounds silly, but changing the cord worked for me and others)

Related

Odin got stuck at initialization step

Hi,
I am a newbie and follow steps carefully to flash rom on my droid charge. I am using Odin 1.82 and CI510_VZW_EP1F_ALL_ONE-LTE-CP_REV3_user_CL300919_Rooted_Debloated.tar.md5 file. I am stucking at initialization step. Would you please give me advice? Thanks a lot.
vnt4356 said:
Hi,
I am a newbie and follow steps carefully to flash rom on my droid charge. I am using Odin 1.82 and CI510_VZW_EP1F_ALL_ONE-LTE-CP_REV3_user_CL300919_Rooted_Debloated.tar.md5 file. I am stucking at initialization step. Would you please give me advice? Thanks a lot.
Click to expand...
Click to collapse
Remove the battery before you go into download mode and put it back in once Odin recognizes your phone.
Yeah I got stuck there too...putting the battery back in worked wonders!
Yeah, it worked like a charm. Thanks for your help. Finally, I have my custom rom on my droid charge.
What do you do it f you have a devise that doesn't have a removable battery?
hi guys i have the same problem with sm-n900 note 3 but removing the battery does nothing please help me out
hazard209 said:
Remove the battery before you go into download mode and put it back in once Odin recognizes your phone.
Click to expand...
Click to collapse
my phone wont recognize it. how can I fix it. help me please
Sorry to hear that. Could you try using a different USB cable or PORT? Let the phone be connected in Odin mode and remove the battery. Wait for 2 - 5 minutes and assemble the battery again.
hazard209 said:
Remove the battery before you go into download mode and put it back in once Odin recognizes your phone.
Click to expand...
Click to collapse
i dont know exactly what you mean. I have a t399 that i´m trying to flash but if i withdraw the battery it won´t get recognized by the pc. please can you be a little more especific i´d be really grateful.
guys please help ??? when i try to flash stock rom on my device (samsung GT-S7582) odin stuck at Initialzation and i get this message :
<ID:0/004> Added!!
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Set PIT file..
<ID:0/004> DO NOT TURN OFF TARGET!!
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/004> Removed!!
i tried to set pit file but still get the same error !! what should i do
<ID:0/004> Added!!
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
guys its stuck on this please help

Soft Brick Help?

I just got a SGS2 Skyrocket and was using odin. It didn't make any progress for 3 hours so I unplugged (I know not to but I didn't know an alternative either). Anyway, I am now getting the "Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again." Error message. I read in another thread that I should re-enter Odin to try to fix it, but I can no longer get into download mode. What's the next step here? I know this topic has been discussed, but I really want to make sure I do this right.
When you see that "error" screen you should be in download mode. If not do this. Pull battery and reinsert. Hold the up /down volume and plug in USB. Should kick you into download mode.
Sent from my SAMSUNG-SGH-I727 using xda premium
iLiberate said:
I just got a SGS2 Skyrocket and was using odin. It didn't make any progress for 3 hours so I unplugged (I know not to but I didn't know an alternative either). Anyway, I am now getting the "Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again." Error message. I read in another thread that I should re-enter Odin to try to fix it, but I can no longer get into download mode. What's the next step here? I know this topic has been discussed, but I really want to make sure I do this right.
Click to expand...
Click to collapse
I had the same issue.. your in download mode.. try pushing your rom of choice through odin again, but use a different usb port. Your basically still in download mode.
Sent from my SGH-T989 using Tapatalk
capcanuck said:
I had the same issue.. your in download mode.. try pushing your rom of choice through odin again, but use a different usb port. Your basically still in download mode.
Sent from my SGH-T989 using Tapatalk
Click to expand...
Click to collapse
Yup, despite the error message you're seeing you should still be able to flash the stock .tar. The phone won't look like it's doing anything--you'll still see the error message--but if Odin sees it you should be fine.
I had this happen to me too and it worked fine.
Well I am at the step where you insert the TAR file for the PDA slot on odin and I can only get this far:
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> boot.img
<ID:0/003> NAND Write Start!!
<ID:0/003> recovery.img
<ID:0/003> system.img.ext4
I used the i727 TAR instead of the i727R TAR file. That's the only thing I can imagine changing to make this work.
Am I suppose to be choosing a ROM at this point as well? Where do I get a pit file if I need one?
Here is process.
iLiberate said:
Well I am at the step where you insert the TAR file for the PDA slot on odin and I can only get this far:
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> boot.img
<ID:0/003> NAND Write Start!!
<ID:0/003> recovery.img
<ID:0/003> system.img.ext4
I used the i727 TAR instead of the i727R TAR file. That's the only thing I can imagine changing to make this work.
Am I suppose to be choosing a ROM at this point as well? Where do I get a pit file if I need one?
Click to expand...
Click to collapse
Same Problem
Hey im new at this and i'm having the same problem. my issue is i have the error message and did what you guys said and reattempted Odin. it recognizes the phone and says
<ID:0/004>Complete(Write) operation failed.
and above the yellow box in Odin is a red box that says Fail!
i have tried this a few times and this is the only result i get.
i think i might have done something wrong with the tar file, i downloaded the correct one and i used 7-Zip to convert the rar to tar and odin now recognizes the file but idk if i was supposed to do that. Any help is greatly appreciated!
sorry for being an idiot i figured out what i did wrong
Yes you must unzip the. 7z file the tar is inside. Unzip it with 7zip then run odin and select the unzips tar file in the pda section of odin

Flashing back to stock

I'm attempting to get back to stock. I'm currently on one of the CM10 nightlies and don't like the all the data and sound issues I'm getting.
I've downloaded the stock firmware and kernal. I go into Odin, download mode etc. I can download the kernal to my device but whenever I attempt the firmware I keep getting the same error:
<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I figured it was a download error but I've tried the download multiple times from a few different links in the forums all with no success.
Thoughts?
Thanks.
can't you just restore a nand? it is probably the easiest way
kidhudi said:
can't you just restore a nand? it is probably the easiest way
Click to expand...
Click to collapse
Normally yes, but I didn't make the backup like a moron.
celliobp said:
Normally yes, but I didn't make the backup like a moron.
Click to expand...
Click to collapse
Figured it out, well rather figured out a work around...while in ODIN if i unplugged the phone then plug it back in and hit start it kicks in....must be some bug w/ the sg3

[Q]Stuck in download mode

Please help me i have restarted my tab GT-N800) and the samsung sign kept rotaing.
I Factory restarted it but no good .
Then i put it in download mode and tried to flash it but it is stuck in SetupConnection
Now it is stuck in download mode when i click Power + Volume up button only the android sign comes the odin mode information does not come
Please Help me :crying:
What about this?
:good:
AthulVincent said:
Please help me i have restarted my tab GT-N800) and the samsung sign kept rotaing.
I Factory restarted it but no good .
Then i put it in download mode and tried to flash it but it is stuck in SetupConnection
Now it is stuck in download mode when i click Power + Volume up button only the android sign comes the odin mode information does not come
Please Help me :crying:
Click to expand...
Click to collapse
1. At the downloading screen, plug your phone into your computer
2. Run Odin (I used Odin3 v3.09)
3. Uncheck auto reboot and F. Reset Time
4. Select PIT and load a .pit file ( Search forum for right PIT file)
5. Click Start
It will fail and your Message box will look like this
<ID:0/005> Added!!
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Set PIT file..
<ID:0/005> DO NOT TURN OFF TARGET!!
<ID:0/005> FAIL!
<ID:0/005>
<ID:0/005> Re-Partition operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/005> Removed!!
6. Now uplug your phone from the computer and reboot.
The only explanation I can come up with is that the partition file info gets corrupted or lost and doing this either rewrites the partition info file or tells the system where to look for it. I could be wrong but it is the only thing that works for me.
Wish you luck! Peter :fingers-crossed:
This should be a sticky, thanks my tablet is working again. Thank you Tanker32
Sent from my SM-N900 using Tapatalk

Can't root OG1 - help

My Galaxy S5 (Sprint) updated to G900PVPU3BOG1 "OG1" firmware.
SInce then I can not root the phone with CF-Auto_root as usual. I tried TWRP (my fav), Clockworkmod, & philz touch. All give me a FAIL in ODIN.
I tried ODIN 3.10 and 3.09.
I also tried to flash custom ROMs with ODIN with similar FAIL in ODIN.
Now, I've flashed and rooted my S3 and S5 a number of times of different PCs without issues but nothing seems to work since I got OG1.
Is this a security issue with OG1? Am I missing something? I've exhausted all options I know of.
Joe
Here is what ODIN says when applying TWRP 2.8.7.0
<ID:0/009> Added!!
<ID:0/009> Odin v.3 engine (ID:9)..
<ID:0/009> File analysis..
<ID:0/009> SetupConnection..
<ID:0/009> Initialzation..
<ID:0/009> Get PIT for mapping..
<ID:0/009> Firmware update start..
<ID:0/009> SingleDownload.
<ID:0/009> recovery.img
<ID:0/009> NAND Write Start!!
<ID:0/009> FAIL! (Auth)
<ID:0/009>
<ID:0/009> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
[email protected] said:
My Galaxy S5 (Sprint) updated to G900PVPU3BOG1 "OG1" firmware.
SInce then I can not root the phone with CF-Auto_root as usual. I tried TWRP (my fav), Clockworkmod, & philz touch. All give me a FAIL in ODIN.
I tried ODIN 3.10 and 3.09.
I also tried to flash custom ROMs with ODIN with similar FAIL in ODIN.
Now, I've flashed and rooted my S3 and S5 a number of times of different PCs without issues but nothing seems to work since I got OG1.
Is this a security issue with OG1? Am I missing something? I've exhausted all options I know of.
Joe
Here is what ODIN says when applying TWRP 2.8.7.0
<ID:0/009> Added!!
<ID:0/009> Odin v.3 engine (ID:9)..
<ID:0/009> File analysis..
<ID:0/009> SetupConnection..
<ID:0/009> Initialzation..
<ID:0/009> Get PIT for mapping..
<ID:0/009> Firmware update start..
<ID:0/009> SingleDownload.
<ID:0/009> recovery.img
<ID:0/009> NAND Write Start!!
<ID:0/009> FAIL! (Auth)
<ID:0/009>
<ID:0/009> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
I am also having this same issue when trying to use CF autoroot and if I try to flash any custom recovery.
I have OG1 on my S5 and never had a problem with getting root. I used Odin3_v3.10.7 and used CF-Auto-Root-kltespr-kltespr-smg900p.tar.md5. TWRP works well but I used Philz. Try this order when rooting. Its seems to me its always something small that your missing.
Put your phone in download mode
activate odin and then plug in your phone to the usb.
click on the AP tab load the md file from cf auto root
make sure your comm port shows up and is blue, if all is right
click the start button and in 9 seconds you should be rooted and then follow up with twrp or Philz and you should be all set...
Suntar said:
I have OG1 on my S5 and never had a problem with getting root. I used Odin3_v3.10.7 and used CF-Auto-Root-kltespr-kltespr-smg900p.tar.md5. TWRP works well but I used Philz. Try this order when rooting. Its seems to me its always something small that your missing.
Put your phone in download mode
activate odin and then plug in your phone to the usb.
click on the AP tab load the md file from cf auto root
make sure your comm port shows up and is blue, if all is right
click the start button and in 9 seconds you should be rooted and then follow up with twrp or Philz and you should be all set...
Click to expand...
Click to collapse
OK tried using odin 3.10.7 and it still failed at the same exact point:crying:
Suntar said:
I have OG1 on my S5 and never had a problem with getting root. I used Odin3_v3.10.7 and used CF-Auto-Root-kltespr-kltespr-smg900p.tar.md5. TWRP works well but I used Philz. Try this order when rooting. Its seems to me its always something small that your missing.
Put your phone in download mode
activate odin and then plug in your phone to the usb.
click on the AP tab load the md file from cf auto root
make sure your comm port shows up and is blue, if all is right
click the start button and in 9 seconds you should be rooted and then follow up with twrp or Philz and you should be all set...
Click to expand...
Click to collapse
[email protected] said:
My Galaxy S5 (Sprint) updated to G900PVPU3BOG1 "OG1" firmware.
SInce then I can not root the phone with CF-Auto_root as usual. I tried TWRP (my fav), Clockworkmod, & philz touch. All give me a FAIL in ODIN.
I tried ODIN 3.10 and 3.09.
I also tried to flash custom ROMs with ODIN with similar FAIL in ODIN.
Now, I've flashed and rooted my S3 and S5 a number of times of different PCs without issues but nothing seems to work since I got OG1.
Is this a security issue with OG1? Am I missing something? I've exhausted all options I know of.
Joe
Here is what ODIN says when applying TWRP 2.8.7.0
<ID:0/009> Added!!
<ID:0/009> Odin v.3 engine (ID:9)..
<ID:0/009> File analysis..
<ID:0/009> SetupConnection..
<ID:0/009> Initialzation..
<ID:0/009> Get PIT for mapping..
<ID:0/009> Firmware update start..
<ID:0/009> SingleDownload.
<ID:0/009> recovery.img
<ID:0/009> NAND Write Start!!
<ID:0/009> FAIL! (Auth)
<ID:0/009>
<ID:0/009> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
So after many many attepts and failures I saw a post that said that the problem that I was running into was that I had reactivation lock on. I shut off reactivation lock and my phone rooted and allowed me to install a custom recovery without any issue. Hopefully this helps others who are having this same problem
j3ffm1ll said:
So after many many attepts and failures I saw a post that said that the problem that I was running into was that I had reactivation lock on. I shut off reactivation lock and my phone rooted and allowed me to install a custom recovery without any issue. Hopefully this helps others who are having this same problem
Click to expand...
Click to collapse
That was it!! The reactivation lock option was checked.
Back to normal now, rooted, etc. Thanks!
https://youtu.be/1Vo_QFpSLhg
Glad you got rooted..
would this be the fix if i'm on OG1 update?
lifesgood88 said:
would this be the fix if i'm on OG1 update?
Click to expand...
Click to collapse
Just make sure that it is unchecked. Then you can flash a recovery with ODIN and then supersu if you want rooted stock.
can i change a recovery.img into a md5 file so i can flash it?
lifesgood88 said:
can i change a recovery.img into a md5 file so i can flash it?
Click to expand...
Click to collapse
Go here, https://www.androidfilehost.com/?w=files&flid=15340
Download either the first one on the page the KTsoonez TWRP or philz_touch_6.57.8-klte.tar. Turn off phone and reboot to download mode (power + home + vol down) . Open ODIN on the computer when the phone is in download mode. Connect phone to computer. ODIN should recognize it. Put recovery in PA slot and check auto reboot. Hit start and the recovery should flash in a few seconds. After it is finished, unplug phone and pull battery. turn on phone normally and let it boot. Download this file https://download.chainfire.eu/696/SuperSU/UPDATE-SuperSU-v2.46.zip and copy to phone SD. Turn off phone. Turn on phone to recovery power+vol up+home and Install Zip and select this file you just downloaded. Reboot. You are rooted.
So I'm trying to root my roommates S5 G900P/OG1 with Odin 3.10.7 and I cant disable the reactivation lock on it. It will let me put in his password then it goes back to the security page with the lock still on. Ive tried the factory reset workaround to no avail. Ive searched and searched. Does anyone have any ideas?

Categories

Resources