I just got a SGS2 Skyrocket and was using odin. It didn't make any progress for 3 hours so I unplugged (I know not to but I didn't know an alternative either). Anyway, I am now getting the "Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again." Error message. I read in another thread that I should re-enter Odin to try to fix it, but I can no longer get into download mode. What's the next step here? I know this topic has been discussed, but I really want to make sure I do this right.
When you see that "error" screen you should be in download mode. If not do this. Pull battery and reinsert. Hold the up /down volume and plug in USB. Should kick you into download mode.
Sent from my SAMSUNG-SGH-I727 using xda premium
iLiberate said:
I just got a SGS2 Skyrocket and was using odin. It didn't make any progress for 3 hours so I unplugged (I know not to but I didn't know an alternative either). Anyway, I am now getting the "Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again." Error message. I read in another thread that I should re-enter Odin to try to fix it, but I can no longer get into download mode. What's the next step here? I know this topic has been discussed, but I really want to make sure I do this right.
Click to expand...
Click to collapse
I had the same issue.. your in download mode.. try pushing your rom of choice through odin again, but use a different usb port. Your basically still in download mode.
Sent from my SGH-T989 using Tapatalk
capcanuck said:
I had the same issue.. your in download mode.. try pushing your rom of choice through odin again, but use a different usb port. Your basically still in download mode.
Sent from my SGH-T989 using Tapatalk
Click to expand...
Click to collapse
Yup, despite the error message you're seeing you should still be able to flash the stock .tar. The phone won't look like it's doing anything--you'll still see the error message--but if Odin sees it you should be fine.
I had this happen to me too and it worked fine.
Well I am at the step where you insert the TAR file for the PDA slot on odin and I can only get this far:
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> boot.img
<ID:0/003> NAND Write Start!!
<ID:0/003> recovery.img
<ID:0/003> system.img.ext4
I used the i727 TAR instead of the i727R TAR file. That's the only thing I can imagine changing to make this work.
Am I suppose to be choosing a ROM at this point as well? Where do I get a pit file if I need one?
Here is process.
iLiberate said:
Well I am at the step where you insert the TAR file for the PDA slot on odin and I can only get this far:
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> boot.img
<ID:0/003> NAND Write Start!!
<ID:0/003> recovery.img
<ID:0/003> system.img.ext4
I used the i727 TAR instead of the i727R TAR file. That's the only thing I can imagine changing to make this work.
Am I suppose to be choosing a ROM at this point as well? Where do I get a pit file if I need one?
Click to expand...
Click to collapse
Same Problem
Hey im new at this and i'm having the same problem. my issue is i have the error message and did what you guys said and reattempted Odin. it recognizes the phone and says
<ID:0/004>Complete(Write) operation failed.
and above the yellow box in Odin is a red box that says Fail!
i have tried this a few times and this is the only result i get.
i think i might have done something wrong with the tar file, i downloaded the correct one and i used 7-Zip to convert the rar to tar and odin now recognizes the file but idk if i was supposed to do that. Any help is greatly appreciated!
sorry for being an idiot i figured out what i did wrong
Yes you must unzip the. 7z file the tar is inside. Unzip it with 7zip then run odin and select the unzips tar file in the pda section of odin
RESOLVED. Thanks!
Hey all,
Im hoping someone here can help me out.
Plugged my SGH-i727 into Kies this morning and a message popped up that there was an update available. I kicked off the update and walked away. Came back and there was an error on the screen saying that it failed. Phone has a message now that displays "Firmware upgrade encountered an issues. Please select recovery mode in Kies & try again" Tried that and it also failed. Same message on the phone.
Came here and followed the directions step by step for flashing back to stock using Odin. Odin launches fine. Pulled the phones battery and went into DL mode and Odin recognizes it successfully. Checkmark on PDA "ONLY" and selected PDA and the file. Clicked start. The process starts but fails and with a "No PIT partition" message.
This is a stock non-rooted phone. Have only ran updates via Kies. Tried 2 PC's and 1 laptop. Same error. Tried the 4.1.2 and 4.0.4 DL's from Sammobile... same error. Here is the Odin message:
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> KIES_HOME_I727UCMC1_I727ATTMC1_844945_REV02_user_low_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> There is no PIT partition.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/005> Removed!!
I would truly be greatful for any and all assistance to get my phone back up and running.
Thanks!!
First see vincoms stickies in the development forum. You probably have to odin gb rom first to get everything back on track. You can find that stock rom at sammobile.com.
Sent from my SAMSUNG-SGH-I727 using xda app-developers app
jd1639 said:
First see vincoms stickies in the development forum. You probably have to odin gb rom first to get everything back on track. You can find that stock rom at sammobile.com.
Sent from my SAMSUNG-SGH-I727 using xda app-developers app
Click to expand...
Click to collapse
I will give that a go. I did "not" try going all the way back to GB.
Downloading that now. will try and report back either way.
thanks
well I tried all 3 stock roms available for the SGH-i727. Still getting the same message in Odin:
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> There is no PIT partition.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/005> Removed!!
Anyone else have any ideas? I would greatly appreciate the assist.
Thank you!
EraserX33 said:
well I tried all 3 stock roms available for the SGH-i727. Still getting the same message in Odin:
Odin v.3 engine (ID:5)..
File analysis..
SetupConnection..
Initialzation..
Get PIT for mapping..
There is no PIT partition.
All threads completed. (succeed 0 / failed 1)
Removed!!
Anyone else have any ideas? I would greatly appreciate the assist.
Thank you!
Click to expand...
Click to collapse
You might have to flash a pit file to the pit partition. Do this if and only if you exhaust all other options. Extremely dangerous. If you exhaust everything else, try warranty or att store before messing with your pit.
As for how to do it, I do not know but there is a thread by cschmitt in dev or general forum. If it comes to re-flashing your pit, as far as i know, cschmitt is the only one who can help you.
Basically it involves getting the stock skyrocket pit file and flashing it in Odin with repartition checked. Again, get all the details from cschmitt's thread (and buy him a beer ) before you attempt it.
Sent from my SAMSUNG-SGH-I727 using xda app-developers app
from the 1stop sticky
[GUIDE] Odin Crashes at "Getting PIT for mapping" ... Post #4 Has A Possible Fix, but read the whole thread
search and stickys are your friend
Problem resolved. For whatever reason I fired up my old XP home laptop (2003) and I was able to flash back to GB. I have no idea why it would not work on any of my other machines but it's working now. And to think I almost tossed that paperweight out last year. Glad I didn't.
Thank you all for all the replies. Much appreciated. :good:
GT-N8013
Blue/Gray
16GB Wifi Only Model
I was watching a youtube video, my tablet froze for an hour, died, then I let it charge and it rebooted into the samsung logo. After that it decided to go white screen and goes to a white screen every time it's booted. I've been trying to resolve this on my own with various resources for about a month now.
I can get to ODIN mode no problem, but I can't flash anything. I have recently bought a new OEM Samsung USB cable and tried multiple versions of ODIN on two different machines. Directly connected to the motherboard and not USB 3.0 ports.
I think the solution to my problem may be answered:
Here: http://forum.xda-developers.com/showthread.php?t=2268735
or
Here: http://forum.xda-developers.com/showthread.php?t=2713297
It is hard for me to comprehend the English used in the first link as I think Authors first language is not English. I think what he is saying is that if ODIN is not working then you have to flash the PIT file via adb and a SD card, but I cannot access Recovery, and I don't recall fully how to use ADB in Downloading Mode, if that's possible at all. He also states I may need to downgrade my bootloader version based on the last ROM that I had on my tablet. If someone could educate me on that I'd appreciate it.
The 2nd link says I need the stock firmware for my country(I live in the U.S. of A.) and to nand erase all but I feel like that should be used as a last resort. I did download both N8013UEALI3(4.0.4) & N8013UEUCMI3(4.1.2) from sammobile.com though.
When I try to flash just a Recovery/ROM, with Autoreboot checked, I get the PIT error message below:
<ID:0/006> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> KIES_HOME_N8013UEALI3_N8013XARALI3_1081475_REV00_user_low_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006>
<ID:0/006> There is no PIT partition.
<OSM> All threads completed. (succeed 0 / failed 1)
When I try to flash a PIT by its self, with Auto Reboot & Re-partition checked, I get the error message:
<ID:0/007> Added!!
<ID:0/007> Odin v.3 engine (ID:7)..
<ID:0/007> File analysis..
<ID:0/007> SetupConnection..
<ID:0/007> Initialzation..
<ID:0/007> Set PIT file..
<ID:0/007> DO NOT TURN OFF TARGET!!
<ID:0/007>
<ID:0/007> Re-Partition operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
When I try to flash a PIT by its self, Re-partition checked, I get the error message:
<ID:0/007> Added!!
<ID:0/007> Odin v.3 engine (ID:7)..
<ID:0/007> File analysis..
<ID:0/007> SetupConnection..
<ID:0/007> Can't open the serial(COM) port.
<OSM> All threads completed. (succeed 0 / failed 1)
When I try to flash a PIT w/ Recovery/ROM, Re-partition Checked and Auto-Reboot checked, I get:
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> KIES_HOME_N8013UEALI3_N8013XARALI3_1081475_REV00_user_low_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Can't open the serial(COM) port.
<OSM> All threads completed. (succeed 0 / failed 1)
Any assitance would be greatly appreciated, I've been without my tablet for a month now. I have any backup, I don't recall the ROM I flashed because it was so long ago, but I'm pretty sure the version was Jellybean. I know my recoevry was one of the later CWM TouchScreen Rom recoverys but I can't recall the version. Thanks for any help, please let me know what information I'm lacking or what I can do, thank you all for your time.
Update
Any assistance would be greatly appreciated. I have tried to different PIT files for the PIT mapping and they both failed. Getting pretty desperate now. I can't even NAND Erase All, I gave that a shot and it failed:
When I select NAND Erase All, stock rom(4.0.4 or 4.1.2), Pit, & Re-Partition checked, Nand Erase all Checked, I get the following in ODIN 3.07 and 3.09:
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> KIES_HOME_N8013UEALI3_N8013XARALI3_1081475_REV00_user_low_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Erase...
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I'm starting to think its the ECCM and maybe I need a JTAG repair. Like I said before, I can't get into recovery, I just get a all white screen. When the tablet first died I got the Samsung logo and then it rebooted and went White, I never got the Samsung logo again. Any help please? Even if it's just recommendations for trusted JTAG repair sites, because I don't trust the ones I've found ths far. Or know PIT files that have worked for flashing on the N8013. Anything at all.
BUMP
I found this article here: http://www.sammobile.com/forum/showthread.php?t=23562
Exact same problem I am having, I think I'm going to need a JTAG repair. I just posted a request to get some fresh PIT files from multiple android versions. I ill keep posting updates on how this is going, I feel alone in this issue since no one has said anything but I get multiple views...but I see more and more people are starting to post in the help section for this particular brand of tablet in the past 3-5months, it sounds terrible but I'm glad I'm not alone since I feel like im talking to myself here.
Just contacted Mobiletechvideos guys, I hope they are legit. I'm will to pay $50 for a jtag repair if i can have this tablet back.
onlysafonne said:
I found this article here: http://www.sammobile.com/forum/showthread.php?t=23562
Exact same problem I am having, I think I'm going to need a JTAG repair. I just posted a request to get some fresh PIT files from multiple android versions. I ill keep posting updates on how this is going, I feel alone in this issue since no one has said anything but I get multiple views...but I see more and more people are starting to post in the help section for this particular brand of tablet in the past 3-5months, it sounds terrible but I'm glad I'm not alone since I feel like im talking to myself here.
Just contacted Mobiletechvideos guys, I hope they are legit. I'm will to pay $50 for a jtag repair if i can have this tablet back.
Click to expand...
Click to collapse
@onlysafonne what file fails? I see your log above
carl1961 said:
@onlysafonne what file fails?
Click to expand...
Click to collapse
I've tried to use both ODIN & Heimdall. All files are failing for me. I tried stock 4.0.4 & 4.1.2 Roms, 3 different PIT files, I even tried to NAND erase all with a stock rom and ODIN continues to fail for me. I installed a virutal box on multiple machines running XP SP3 since windows 7/8 weren't working for me as well, that failed as well. When I try to flash the PIT files I get the output from ODIN in my OP, nothing is working for me. I'm just thinking I experienced instant death on this tablet for no reason at all. The most success i've had is with Heimdall just being able to reboot the tablet for me and then go back to Downloading mode, but nothing else is responding for me.
I'f I can get some fresh pit files from fully operational devices I will know that I've done everything I can excluding JTAG repair myself. If I can't get some fresh PIT files from multiple android versions, then I might just have to send it to the Mobiletechvideos guys to see if they can repair.
Thanks for the reply and interest in my issue!
onlysafonne said:
I've tried to use both ODIN & Heimdall. All files are failing for me. I tried stock 4.0.4 & 4.1.2 Roms, 3 different PIT files, I even tried to NAND erase all with a stock rom and ODIN continues to fail for me. I installed a virutal box on multiple machines running XP SP3 since windows 7/8 weren't working for me as well, that failed as well. When I try to flash the PIT files I get the output from ODIN in my OP, nothing is working for me. I'm just thinking I experienced instant death on this tablet for no reason at all. The most success i've had is with Heimdall just being able to reboot the tablet for me and then go back to Downloading mode, but nothing else is responding for me.
I'f I can get some fresh pit files from fully operational devices I will know that I've done everything I can excluding JTAG repair myself. If I can't get some fresh PIT files from multiple android versions, then I might just have to send it to the Mobiletechvideos guys to see if they can repair.
Thanks for the reply and interest in my issue!
Click to expand...
Click to collapse
no I got the pit file from here http://forum.xda-developers.com/showthread.php?p=41158546#post41158546
tell me how to grab it and I will get it from my tablet now for you
Heimdall
carl1961 said:
no I got the pit file from here http://forum.xda-developers.com/showthread.php?p=41158546#post41158546
tell me how to grab it and I will get it from my tablet now for you
Click to expand...
Click to collapse
To download a copy of your PIT all you have to do is install Heimdall, with zadig driver (Samsung/General Device) , boot your tablet into Download mode, and download a copy of your PIT by going to Heimdall Frontend, clicking utilites, and downloading and saving your PIT to your desktop(or where ever you want) and uploading it for me.
Heimdall can be found here: http://glassechidna.com.au/heimdall/
After you are down with Heimdall, make sure you uninstall the driver from "Device Manager" in your USB Devices, that way, you can use ODIN again. A;; of this should only take about 5-10mins, as all the files are really small. i really appreciate this.
onlysafonne said:
To download a copy of your PIT all you have to do is install Heimdall, with zadig driver (Samsung/General Device) , boot your tablet into Download mode, and download a copy of your PIT by going to Heimdall Frontend, clicking utilites, and downloading and saving your PIT to your desktop(or where ever you want) and uploading it for me.
Heimdall can be found here: http://glassechidna.com.au/heimdall/
After you are down with Heimdall, make sure you uninstall the driver from "Device Manager" in your USB Devices, that way, you can use ODIN again. A;; of this should only take about 5-10mins, as all the files are really small. i really appreciate this.
Click to expand...
Click to collapse
@onlysafonne
ok I did it also a compair to My-N8013.pit that you said did not work, they or identical so that may be bad news for you.
thread
http://forum.xda-developers.com/showthread.php?t=1916936
PIT Magic v1.3.10 - Samsung PIT Creator, Editor, Analyzer
carl1961 said:
@onlysafonne
ok I did it also a compair to My-N8013.pit that you said did not work, they or identical so that may be bad news for you.
thread
http://forum.xda-developers.com/showthread.php?t=1916936
PIT Magic v1.3.10 - Samsung PIT Creator, Editor, Analyzer
Click to expand...
Click to collapse
Thank you for this post, that helps me alot, it appears it is beyond recovery via ODIN at this point. Thank you for taking the time to compare your PIT to the previous one. I will wait for Mobiletech to contact me back and post an update from there.
onlysafonne said:
Thank you for this post, that helps me alot, it appears it is beyond recovery via ODIN at this point. Thank you for taking the time to compare your PIT to the previous one. I will wait for Mobiletech to contact me back and post an update from there.
Click to expand...
Click to collapse
if you not under warenty I would maybe buy a used one on ebay that might just have a cracked screen, you might even find a 32GB one
http://www.ebay.com/itm/Samsung-Galaxy-Note-10-1-32-GB-Wi-Fi-GT-N8013-/361155880699?pt=US_Tablets&hash=item54169166fb
onlysafonne said:
Thank you for this post, that helps me alot, it appears it is beyond recovery via ODIN at this point. Thank you for taking the time to compare your PIT to the previous one. I will wait for Mobiletech to contact me back and post an update from there.
Click to expand...
Click to collapse
onlysafonne, I have the same problem. I can use Odin and get to CWM but nothing I flash will get me past the Samsung Galaxy Note 10.1 image I cannot even get it to shut off. It will go black then power right back up.
I have flashed with Nand Erase All checked only
KIES_HOME_N8013UEUCMI3_N8013XARCMI3_813049_REV00_u ser_low_ship.tar
Any ideas? I have not heard of JTAG
I have a N8010 and I'm also in this kind of bootloop.
Nothing works.
I had OmniRom 4.4.4 installed and the newest TWRP.
I only can get into Download Mode.
When I try to get into Recovery the blue TWRP Screen pops up for a second and then it's going back to "Samsung Galaxy Note 10.1" Logo.
I even tried to disassemble the battery. But this didn't work either.
Any ideas what I can do? If not, I'll have to take it to repair. Got some warranty left, but I rather fix it myself.
Thanks
Flying_Phil said:
I have a N8010 and I'm also in this kind of bootloop.
Nothing works.
I had OmniRom 4.4.4 installed and the newest TWRP.
I only can get into Download Mode.
When I try to get into Recovery the blue TWRP Screen pops up for a second and then it's going back to "Samsung Galaxy Note 10.1" Logo.
I even tried to disassemble the battery. But this didn't work either.
Any ideas what I can do? If not, I'll have to take it to repair. Got some warranty left, but I rather fix it myself.
Thanks
Click to expand...
Click to collapse
have you tryed to odin install your firmware? usally the bootloop is caused because you need to do a factory reset to get rid of (in your case OmniRom 4.4.4) your firmware as I see is http://www.sammobile.com/firmwares/confirm/31427/N8010XXUDNE4_N8010BTUDNF1_BTU.zip/
Yes, I did try that. Is still in bootloop afterwards. I also tried to flash stock recovery or cwm recovery. But there is still twrp.
I can't open your link :-/
Flying_Phil said:
Yes, I did try that. Is still in bootloop afterwards. I also tried to flash stock recovery or can recovery. But there is still twrp.
I can't open your link :-/
Click to expand...
Click to collapse
try this N8010 recovery with the included 3.07 odin put in PDA slot and do no check re-partiton look at picture
@Flying_Phil
yes samfirmware is picky go here and search your N8010 you most likly need to signup (it's free) and as you see most odin updates or "home" which means it does not do a factory reset which is ok if your updating a stock unrooted rom so you need to do a factory reset when coming from a custom rom.
well I tried to flash your attached file. Odin said "Pass!" but my Tablet still does the bootloop.
Like I said, I tried to flash several firmwares. All with this same result. First I tried the German version, then the Austrian and the Australian.
Now yours was the version for new zealand.
I have no clue, why this doesn't work.
Here is the log from Odin and I attached a screenshot.
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> PDA_N8010XXUDNK1_N8010NZCDNK1_Recovery.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> recovery.img
<ID:0/003> NAND Write Start!!
<ID:0/003> RQT_CLOSE !!
<ID:0/003> RES OK !!
<ID:0/003> Removed!!
<ID:0/003> Remain Port .... 0
<OSM> All threads completed. (succeed 1 / failed 0)
<ID:0/003> Added!!
Flying_Phil said:
well I tried to flash your attached file. Odin said "Pass!" but my Tablet still does the bootloop.
Like I said, I tried to flash several firmwares. All with this same result. First I tried the German version, then the Austrian and the Australian.
Now yours was the version for new zealand.
I have no clue, why this doesn't work.
Here is the log from Odin and I attached a screenshot.
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> PDA_N8010XXUDNK1_N8010NZCDNK1_Recovery.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> recovery.img
<ID:0/003> NAND Write Start!!
<ID:0/003> RQT_CLOSE !!
<ID:0/003> RES OK !!
<ID:0/003> Removed!!
<ID:0/003> Remain Port .... 0
<OSM> All threads completed. (succeed 1 / failed 0)
<ID:0/003> Added!!
Click to expand...
Click to collapse
ok so did you try and reboot to stock recovery and do a factory reset
carl1961 said:
ok so did you try and reboot to stock recovery and do a factory reset
Click to expand...
Click to collapse
sorry, I forgot to tell about it.
Yes I tried to go into Recovery, but there ist still TWRP on it and it still crashes after a second.
I even tried the flash without checking "Auto reboot", so I could boot directly into recovery, but it worked neither.
Flying_Phil said:
sorry, I forgot to tell about it.
Yes I tried to go into Recovery, but there ist still TWRP on it and it still crashes after a second.
I even tried the flash without checking "Auto reboot", so I could boot directly into recovery, but it worked neither.
Click to expand...
Click to collapse
ok lets backtrack
what is your tablets stock info? and or you 16 GB or 32 GB
carl1961 said:
ok lets backtrack
what is your tablets stock info? and or you 16 GB or 32 GB
Click to expand...
Click to collapse
GT-N8010 16GB. Need more?
ok i have a problem with Odin and my S3 since a year
i tell you my story. i have an S3 and its bricked since a year. some times i tried to flash with Odin v3.04 and other version but nothing works. today is it again i want to try to flash it. but i tried EVERY tutorial, every method. but it shows evertime IN EVERY FLASH THIS
<ID:0/005> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Complete(Write) operation failed.
<ID:0/005> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Complete(Write) operation failed.
<ID:0/005> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Complete(Write) operation failed.
<ID:0/005> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
ok and i readed anything about i should try another cable or anything, but does it really help ?
at the moment i try it with this ROM: I9300XXUGNG3_I9300DBTGNG2_I9300XXUGNA8_HOME.tar.md5 but it wont work :/
so pls help me <3
DursyArts said:
ok i have a problem with Odin and my S3 since a year
i tell you my story. i have an S3 and its bricked since a year. some times i tried to flash with Odin v3.04 and other version but nothing works. today is it again i want to try to flash it. but i tried EVERY tutorial, every method. but it shows evertime IN EVERY FLASH THIS
ok and i readed anything about i should try another cable or anything, but does it really help ?
at the moment i try it with this ROM: I9300XXUGNG3_I9300DBTGNG2_I9300XXUGNA8_HOME.tar.md5 but it wont work :/
so pls help me <3
Click to expand...
Click to collapse
i see a communication fail in between flashing tool /computer and device ...this may be due to damage in your usb cable or may be damage in your port of device. You can try flashing again with a new usb cable .
in case you need pit file visit here
http://forum.xda-developers.com/galaxy-s3/help/solved-pit-bricked-dead-problem-gt-t2535367
Adi Shakthi said:
i see a communication fail in between flashing tool /computer and device ...this may be due to damage in your usb cable or may be damage in your port of device. You can try flashing again with a new usb cable .
in case you need pit file visit here
http://forum.xda-developers.com/galaxy-s3/help/solved-pit-bricked-dead-problem-gt-t2535367
Click to expand...
Click to collapse
ok i have 3 USB cables and 3 PC's but i wont work, i tried all combinations and it shows the same error :/ and when i boot in recovery mode it shows many error like "Cant Mount E:/" bla bla when i want to wipe it shows the errors too :/
Hi everyone,
On my S6 all of a sudden I got the blue screen saying that I need to connect it with Smart Switch for a Recovery. Smart Switch wont recognize the S6. So I tried with Odin to flash a new stock firmware but I keep getting NAND Write Operation Failed after boots.img.
This phone hasnt been used for several months, but I want to recover it because there are very valuable holiday photos on it. So the internal memory cant be wiped. I a hoping that flashing a stock rom will make the phone boot again.
Odin Log
<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> boot.img
<ID:0/003> NAND Write Start!!
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I have tried various stock roms and also various usb cables. The phone was last used in the 1st week of october, so the first rom (6.0.1.) I tried to flash was the lastest prior to it (september). After that I tried August and then I jumped in time to January because I read about a rollback isnt possible. After January (the last month for 6.0.1) I decided to try the latest stock rom avaible for 7.0.
My phone is unbranded but just incase I also tried the 3 branded roms for my country (the netherlands) for vodafone, T-Mobile and Ben. All tried roms gave the same response as stated above.
I also tried to unpack the tar file and use TarCreator to create a separate Tar file for each .img. Then flash them 1 by 1 in Odin. But again the same Nand write error is given.
Odin versions that I used: 1.85 and 1.10.6
Things I didnt try yet:
Pit I kept the Pit empty on Odin. After some research it still wasnt clear to me if using a stock Pit file would not wipe the internal memory.
I hope some here could clarify that. And if I can safely use a Pit file, do i then 1st run the pit file, restart Odin and then flash the Rom. Or can i just enter them both at the same time/session?
BootloaderI found some info that said that boatloader might be corrupted? Again also about that I couldnt find a clear answer if it would wipe the internal memory. Also I am not sure where to find good boatloader files.
I've spend now 3 days on google searching solutions and trying different roms and I dont know what to try next. I hope one of the experts on this forum might know another solution or can give a clear answer on the Pit or Boatloader options.
Kind regards.
Try with Newest ODIN (3.12.7) instead of a Very Old ODIN for at Android 2.2 only (3.08) -> thedroidguru.com/download-latest-odin-odin3-all-versions-full-collection
Illutorium said:
Try with Newest ODIN (3.12.7) instead of a Very Old ODIN for at Android 2.2 only (3.08) -> thedroidguru.com/download-latest-odin-odin3-all-versions-full-collection
Click to expand...
Click to collapse
Thanks! Somehow I was under the assumption that 3,18 was higher but I see the mistake now.
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin engine v(ID:3.1207)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> NAND Write Start!!
<ID:0/003> SingleDownload.
<ID:0/003> boot.img
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/003> Added!!
After boot.img the phone turns off black screen, then goes back to the smart switch recovery screen. Gave it a few more tries and tried with Auto Boot enable and disabled. After the last attempt the phone screen stays black, even when plugged into the charger
Also Ive noticed that the right side of the phone now gets very hot when plugged in.
The screen still stays black. The phone wont even turn on anymore :/
Flashing stock will wipe your data anyway. There is a chance it won't format your internal storage though. If there is VERY important data, you should go to a professional data recovery service.