[Q] JB upgrade failed. Odin failed with PIT message - AT&T Samsung Galaxy S II Skyrocket SGH-I727

RESOLVED. Thanks!
Hey all,
Im hoping someone here can help me out.
Plugged my SGH-i727 into Kies this morning and a message popped up that there was an update available. I kicked off the update and walked away. Came back and there was an error on the screen saying that it failed. Phone has a message now that displays "Firmware upgrade encountered an issues. Please select recovery mode in Kies & try again" Tried that and it also failed. Same message on the phone.
Came here and followed the directions step by step for flashing back to stock using Odin. Odin launches fine. Pulled the phones battery and went into DL mode and Odin recognizes it successfully. Checkmark on PDA "ONLY" and selected PDA and the file. Clicked start. The process starts but fails and with a "No PIT partition" message.
This is a stock non-rooted phone. Have only ran updates via Kies. Tried 2 PC's and 1 laptop. Same error. Tried the 4.1.2 and 4.0.4 DL's from Sammobile... same error. Here is the Odin message:
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> KIES_HOME_I727UCMC1_I727ATTMC1_844945_REV02_user_low_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> There is no PIT partition.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/005> Removed!!
I would truly be greatful for any and all assistance to get my phone back up and running.
Thanks!!

First see vincoms stickies in the development forum. You probably have to odin gb rom first to get everything back on track. You can find that stock rom at sammobile.com.
Sent from my SAMSUNG-SGH-I727 using xda app-developers app

jd1639 said:
First see vincoms stickies in the development forum. You probably have to odin gb rom first to get everything back on track. You can find that stock rom at sammobile.com.
Sent from my SAMSUNG-SGH-I727 using xda app-developers app
Click to expand...
Click to collapse
I will give that a go. I did "not" try going all the way back to GB.
Downloading that now. will try and report back either way.
thanks

well I tried all 3 stock roms available for the SGH-i727. Still getting the same message in Odin:
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> There is no PIT partition.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/005> Removed!!
Anyone else have any ideas? I would greatly appreciate the assist.
Thank you!

EraserX33 said:
well I tried all 3 stock roms available for the SGH-i727. Still getting the same message in Odin:
Odin v.3 engine (ID:5)..
File analysis..
SetupConnection..
Initialzation..
Get PIT for mapping..
There is no PIT partition.
All threads completed. (succeed 0 / failed 1)
Removed!!
Anyone else have any ideas? I would greatly appreciate the assist.
Thank you!
Click to expand...
Click to collapse
You might have to flash a pit file to the pit partition. Do this if and only if you exhaust all other options. Extremely dangerous. If you exhaust everything else, try warranty or att store before messing with your pit.
As for how to do it, I do not know but there is a thread by cschmitt in dev or general forum. If it comes to re-flashing your pit, as far as i know, cschmitt is the only one who can help you.
Basically it involves getting the stock skyrocket pit file and flashing it in Odin with repartition checked. Again, get all the details from cschmitt's thread (and buy him a beer ) before you attempt it.
Sent from my SAMSUNG-SGH-I727 using xda app-developers app

from the 1stop sticky
[GUIDE] Odin Crashes at "Getting PIT for mapping" ... Post #4 Has A Possible Fix, but read the whole thread
search and stickys are your friend

Problem resolved. For whatever reason I fired up my old XP home laptop (2003) and I was able to flash back to GB. I have no idea why it would not work on any of my other machines but it's working now. And to think I almost tossed that paperweight out last year. Glad I didn't.
Thank you all for all the replies. Much appreciated. :good:

Related

Can anyone tell me what this means?

<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> PDA_KD1.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> zImage
<ID:0/003> NAND Write Start!!
<ID:0/003> param.lfs
<ID:0/003> factoryfs.rfs
<ID:0/003> data.rfs
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I get this constantly trying to flash odin PDA_KD1.tar.md5
I notice that when I boot up it only has 30mb of internal memory available.. any reason as to know why?
*************************
UPDATE!!!!!
12:17AM Central
I have fully restored my rom with Mr. bkoon1218 assistance!!!
Here's what I did just in case anyone runs into what I did. I will say what mistakes I had done and then give my resolutions that couldn't have been possible without the assistance of these awesome members!
1. I was curious on flashing a custom recovery to my device, STUPIDLY I did not read or research anything regarding this phone.
2. I flashed Cmenard with heimdall-suite-1.1.1-win32 thinking that it would give me a recovery because I thought that I had the Samsung Galaxy *Vibrant*
3.Two days stressfully googling and googling for corrections and mistakes other may have done like me I had no choice but to ask myself.
I started off in the Vibrant section and a guy helped me out with flashing the rom but still nothing. Given instructions I felt my phone was done. I would get glitches and a nasty pixelated boot.
4. I researched my phone model number on the back of my phone and realized my phone wasn't the Vibrant.. Then it banged my head when another emailed me saying it was weird that my Samsung Vibrant was a 4g device lol.
5. I then moved to Samsung Galaxy S 4g and proceeded to find help along with the research I had done.. I even tried all the Odin updates thinking that could've made the difference.
*Resolution*
1. THANKS TO ALL FOR HELPING FIRST OFF ALL!!! YOU ARE ALL GREATLY APPRECIATED!! Next! A BIG THANKS! to * bkoon1218 *
for providing me with a helpful link where I read and understood what this rom was for. LINK - http://forum.xda-developers.com/showthread.php?t=1129933
2.Downloading Hawk.zip file I then used Winrar to extract it and there are four files!
-1.SGH-T959V-CSC-TMB.tar.md5
-2.Sgs4g.pit
-3.T959VUVKC1-Phone-CL932707.tar.md5
-4.T959VUVKC1-REV00-ALL-low-CL933594.tar.md5
3. I tried Odin 1.85 and it didn't work for me however I now know the reason why and what's funny is it happend accidentally.
I forgot to uncheck Re-Partition and I thought it would immediately softbrick my phone!! I started to see however it doing it's magic!
I said "ahh might as well let it go through the process I'll just one click unbrick my phone if it doesn't do it again..". By the way I used Odin 1.7.
and poom!!!! I got a pass!!! *This was only with Checking the box Re-Partition!*
4.So I am now fully fresh back to stock and unrooted and I am done. I decided to write this for any others that go through the same problem I did. I don't mean to take anybody's credit or anything I just want other to look this up when they accidentally flash their phone with a different rom and are as lucky as I am.
**MY ENDING RESULTS**
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> T959VUVKC1-REV00-ALL-low-CL933594.tar.md5 is valid.
<OSM> T959VUVKC1-Phone-CL932707.tar.md5 is valid.
<OSM> SGH-T959V-CSC-TMB.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Set PIT file..
<ID:0/005> DO NOT TURN OFF TARGET!!
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> zImage
<ID:0/005> boot.bin
<ID:0/005> Sbl.bin
<ID:0/005> param.lfs
<ID:0/005> factoryfs.rfs
<ID:0/005> cache.rfs
<ID:0/005> data.rfs
<ID:0/005> modem.bin
<ID:0/005> cache.rfs
<ID:0/005> data.rfs
<ID:0/005> Removed!!
<ID:0/005> Completed..
<OSM> All threads completed. (succeed 1 / failed 0)
THANK YOU ALL AND GOOD LUCK TO YOU ALL!!!!!
The lack of internal memory could be due to the amount of apps you have installed. I'm wondering if that lack of free memory is causing the problem? what ROM is currently on it (prior to you trying to flash)?
Sent from my SGH-T959V using XDA App
What rom are you trying to flash? You should try again with a different USB port after doing a battery pull and putting the phone back into download mode.
PDA_KD1.tar.md5
That's the Rom I'm flashing and it keeps failing on me.
I tried flashing it like three times again and now it just keeps vibrating every three seconds!! Its getting really annoying! Any other Odin stock Roms I can try?
At the moment I'm only rooted and have stock recovery.
Instead of flashing KD1, try KC1. Here's the link to it.
http://forum.xda-developers.com/showthread.php?t=1129933
There's only one download link in there. The .pit file goes into PIT. REV00 goes into PDA. Phone goes into PHONE. CSC goes into CSC. Do NOT change any of the settings in Odin.
KC1 gives you a 100% clean slate, so it'll remove root and CWM and it'll leave you with a stock Froyo ROM. It'll even restore Froyo bootloaders. In the event you screw something up, just Odin KC1 and it'll remove the gremlins.
bkoon1218 said:
Instead of flashing KD1, try KC1. Here's the link to it.
http://forum.xda-developers.com/showthread.php?t=1129933
There's only one download link in there. The .pit file goes into PIT. REV00 goes into PDA. Phone goes into PHONE. CSC goes into CSC. Do NOT change any of the settings in Odin.
KC1 gives you a 100% clean slate, so it'll remove root and CWM and it'll leave you with a stock Froyo ROM. It'll even restore Froyo bootloaders. In the event you screw something up, just Odin KC1 and it'll remove the gremlins.
Click to expand...
Click to collapse
Thanks a bunch. I really appreciate it. I've tried stock KC1 but I never used the pit and all the other files! Every thread I'd search for said only PDA. I've now learned something new. Thank you! I will try later tonight and to everyone that has been reading my questions A humongous thanks to you All!! You guys are the reason why this site is so helpful!
coldcrush390 said:
Thanks a bunch. I really appreciate it. I've tried stock KC1 but I never used the pit and all the other files! Every thread I'd search for said only PDA. I've now learned something new. Thank you! I will try later tonight and to everyone that has been reading my questions A humongous thanks to you All!! You guys are the reason why this site is so helpful!
Click to expand...
Click to collapse
Let us know how that works for you.
On another note, I always use KC1 as a base ROM to Odin back to Froyo. There's nothing cleaner than that.
bkoon1218 said:
Let us know how that works for you.
On another note, I always use KC1 as a base ROM to Odin back to Froyo. There's nothing cleaner than that.
Click to expand...
Click to collapse
I am currently setting up everything now to try once again thank you!
Ok so now I have flashed the files in the Hawk.zip and still getting the same fail at the end of the flash. I think I'm just gonna keep doing this until it will finally go through... what do you think?
Glad to know you got it resolved.
Btw, KC1 is supposed to have Re-Partition checked. Just remember that you almost never change the settings in Odin once you put in the proper files. I think this KC1 is the only one that has it checked though.
Now that you're on a clean slate again, have fun with GB.
coldcrush390 said:
Ok so now I have flashed the files in the Hawk.zip and still getting the same fail at the end of the flash. I think I'm just gonna keep doing this until it will finally go through... what do you think?
Click to expand...
Click to collapse
You can also follow my GB starter pack if you want to wind up on GB at the end of this. It'll be simpler. You can click the link on my signature.

P6810 Odin fail

Hello guys,
i have problem with my P6810 16gb Wifi tablet, the problem started when i flashed CWM touch and then my touch screen stoped working so i tried to flash firmware and i got odin fail, from then when i turn it on it says "Firmware upgrade encountered an issue.Please select recovery mode in Kies & try again"..
Odin message:
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> P6810OZSLP8_P6810ZSLP8_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> boot.bin
<ID:0/003> NAND Write Start!!
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/003> Added!!
How can i fix this problem?
Cheers!!
bajki_ktm said:
Hello guys,
i have problem with my P6810 16gb Wifi tablet, the problem started when i flashed CWM touch and then my touch screen stoped working so i tried to flash firmware and i got odin fail, from then when i turn it on it says "Firmware upgrade encountered an issue.Please select recovery mode in Kies & try again"..
Odin message:
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> P6810OZSLP8_P6810ZSLP8_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> boot.bin
<ID:0/003> NAND Write Start!!
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/003> Added!!
How can i fix this problem?
Cheers!!
Click to expand...
Click to collapse
If you have kies installed in your computer, please try to disable or uninstalled it. As I know, Samsung KIES and ODIN could not get along with together....
cakrabayu said:
If you have kies installed in your computer, please try to disable or uninstalled it. As I know, Samsung KIES and ODIN could not get along with together....
Click to expand...
Click to collapse
I don't have installed KIES..
Sorry....Did you follow this guide while using odin? http://forum.xda-developers.com/showthread.php?t=1469635 just wondering why you encounterred a problem. Thx.
Sent from my GT-P6800
cakrabayu said:
Sorry....Did you follow this guide while using odin? http://forum.xda-developers.com/showthread.php?t=1469635 just wondering why you encounterred a problem. Thx.
Sent from my GT-P6800
Click to expand...
Click to collapse
I was doing everything like in tutorial, tablet was full charged and i got this error, that's the story..
What could possibly go wrong?
bajki_ktm said:
I was doing everything like in tutorial, tablet was full charged and i got this error, that's the story..
What could possibly go wrong?
Click to expand...
Click to collapse
Really sad about your problem bro.... something wrong with the procedure or your firmware.. there are many cases like you.. you can refer to :
http://androidforums.com/samsung-ga...help-firmware-flashing-failed-using-odin.html
http://forum.xda-developers.com/showthread.php?t=1877308&page=2
http://forum.xda-developers.com/showthread.php?t=1984717
http://forums.whirlpool.net.au/archive/1919243
but it is up to you to give it a try. Luckily for me, I did not encounter the same problem like yours while flashing with pc odin. I prefer using mobile odin. it is safe and easy. Good luck bro...
I am having the same issue on my P6810 (16gb). I cannot use the emergency recovery in Kies because I don't have the recovery code that it asks for (I bought the device as used faulty so don't know the update history). When I try to use the firmware upgrade / initialisation function to reset the tablet, Kies downloads the firmware but fails to connect to the tablet when I plug it in (in download mode, which I can access).
I have tried flashing a downloaded firmware using Odin3 v1.85 and it appears to start okay and copies cache.img but quickly hangs at the factoryfs.img stage.
I have tried different both win7x64 and winXP PCs with no success. I did try Heimdall, which uses a different USB driver, and while I did not have an appropriate Heimdall compatible firmware to flash, I was able to get a display of the current PIT information, so the tablet was communicating OK.
Does my device need repartitioning? I have seen many references to a PIT file, but don't know where to download it from.
This seems to be a common problem from what I can tell so far.
Any help appreciated.
Thanks.
Hello i have the same problem. I read all of your suggestions and guess that should be use a pit-file. Is this overwrite a system. I have troubled ROM compiled and want to install the new one downloaded from sammobiles fo my country. Am I right? Please help me?

[Q] Root attempt gone wrong

Hi All,
I've attempted to root my SM-900, using Odin 3.09 and followed all the usual steps.
Suddenly I got different coloured horizontal lines on screen and that probably means my attemp didn't go that well...
I've read I should go back to the original firmware using kies, and then try again.
So how do I restore the original firmware?
I have an image (.img) and understand I need samsung Kies.
Question: Do I use Kies or the new KIES3?
How to go from there?
Or is there another way to restore the firmware?
Thanks in advance!
I figured it out already....
I un-tar-red the recovery file. Leaving it as .tar solved the issue.
bricked
my tablet is stuck,tried different usb ports,different odins,different cables .gets stuck on set up connection,now all i get on screen is FIRMWARE UPGRADE ENCOUNTERED AN ISSUE
wolverinex66 said:
my tablet is stuck,tried different usb ports,different odins,different cables .gets stuck on set up connection,now all i get on screen is FIRMWARE UPGRADE ENCOUNTERED AN ISSUE
Click to expand...
Click to collapse
Please describe what is showing on tab's screen
Sent from my GT-S7562 using XDA Premium 4 mobile app
fixed
I was able to flash the stock recovery thanks
Had the same issues. Solved it by reinstalling the USB drivers. Via Kies 3, under the Tools menu. Worked perfectly after that. (Edit. ...for CFautoroot)
Sent from my SM-P900 using Tapatalk
Man that's gotta be a scary moment...
Sent from my SM-P900 using Tapatalk
Need advice
Frank_H said:
I figured it out already....
I un-tar-red the recovery file. Leaving it as .tar solved the issue.
Click to expand...
Click to collapse
I have the same problem... root failed with several colored line. and doesnt start anymore.
Can you explain to me what do you mean by "I un-tar-red the recovery file. Leaving it as .tar solved the issue." ?
Thank you
wilsto said:
I have the same problem... root failed with several colored line. and doesnt start anymore.
Can you explain to me what do you mean by "I un-tar-red the recovery file. Leaving it as .tar solved the issue." ?
Thank
Since the recovery image was downloaded as aan .tar file, which is a container file like .zip or.7z, I thought that I needed to unzip it.
You can mount the .tar file in Odin as it is, without unzipping it first.
You can find the recovery download location in the CF-root thread.
Click to expand...
Click to collapse
wilsto said:
I have the same problem... root failed with several colored line. and doesnt start anymore.
Can you explain to me what do you mean by "I un-tar-red the recovery file. Leaving it as .tar solved the issue." ?
Thank you
Click to expand...
Click to collapse
Mine did that after flashing a different firmware and trying to root. I solved it by first flashing the stock recovery in chainfires thread then rooting.
Sent from my SCH-I605 using XDA Premium 4 mobile app
Duly.noted said:
Mine did that after flashing a different firmware and trying to root. I solved it by first flashing the stock recovery in chainfires thread then rooting.
Sent from my SCH-I605 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
yep me too..
I'm having this same problem. I downloaded CF-Auto-Root-v1awifi-v1awifixx-smp900.zip from download.chainfire.eu. I extracted the zip file, leaving me with a tar.md5 file. I try to flash that file, and end up with multicolor bars across the screen, exactly like if the video card dies on a mobile.
Here's what Odin has output as of when the error occurs. It flashes up a big red failed in the upper left box.
Code:
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CF-Auto-Root-v1awifi-v1awifixx-smp900.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> recovery.img
<ID:0/005> NAND Write Start!!
<ID:0/005> cache.img
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/005> Removed!!
So I flashed the original recovery from http://forum.xda-developers.com/showpost.php?p=50492301&postcount=234 and got a working but unrooted tablet. And I flashed CF with both 3.09 and 3.07, with a flash back to stock before each. Same thing every time-picture of a dying video card, except display is fine once flashed back to stock. Pic of the display added, on the off chance it helps.
Install Kies 3, then go into the Tools menu and reinstall the USB drivers. Reboot. Try auto root again. Should work on the first try.
Sent from my SM-P900 using Tapatalk
dodo99x said:
Install Kies 3, then go into the Tools menu and reinstall the USB drivers. Reboot. Try auto root again. Should work on the first try.
Sent from my SM-P900 using Tapatalk
Click to expand...
Click to collapse
I am having the same issue tried different computer with xp same result. Did you ever get it working or no? and if you did get working how?
---------- Post added at 08:39 AM ---------- Previous post was at 08:35 AM ----------
heldc said:
I'm having this same problem. I downloaded CF-Auto-Root-v1awifi-v1awifixx-smp900.zip from download.chainfire.eu. I extracted the zip file, leaving me with a tar.md5 file. I try to flash that file, and end up with multicolor bars across the screen, exactly like if the video card dies on a mobile.
Here's what Odin has output as of when the error occurs. It flashes up a big red failed in the upper left box.
Code:
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CF-Auto-Root-v1awifi-v1awifixx-smp900.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> recovery.img
<ID:0/005> NAND Write Start!!
<ID:0/005> cache.img
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/005> Removed!!
So I flashed the original recovery from http://forum.xda-developers.com/showpost.php?p=50492301&postcount=234 and got a working but unrooted tablet. And I flashed CF with both 3.09 and 3.07, with a flash back to stock before each. Same thing every time-picture of a dying video card, except display is fine once flashed back to stock. Pic of the display added, on the off chance it helps.
Click to expand...
Click to collapse
I am having the same issue tried different computer with xp same result. Did you ever get it working or no? and if you did get working how?
paulskerr said:
I am having the same issue tried different computer with xp same result. Did you ever get it working or no? and if you did get working how?
Click to expand...
Click to collapse
I did. I did the uninstaller for the USB drivers several times, with no luck. So finally I just deleted the Samsung folders in program files and program files x86. I did not reinstall Kies, just the USB drivers from samsung.com. I used odin 3.09, and it went flawlessly. Well, mostly-wifi took a *long* time to reconnect the first time after boot, but I'd also installed the update just before rooting, so dunno if it was the rooting or the update.
heldc said:
I did. I did the uninstaller for the USB drivers several times, with no luck. So finally I just deleted the Samsung folders in program files and program files x86. I did not reinstall Kies, just the USB drivers from samsung.com. I used odin 3.09, and it went flawlessly. Well, mostly-wifi took a *long* time to reconnect the first time after boot, but I'd also installed the update just before rooting, so dunno if it was the rooting or the update.
Click to expand...
Click to collapse
I finally go also. I did exactly what you did. Thank you
Frank_H said:
Hi All,
I have an image (.img) and understand I need samsung Kies.
Click to expand...
Click to collapse
Where do I get this image?
How many are remembering to unhide developer options and then select usb debugging? The moment I did that everything worked
Whwre did you find the USB drivers on samsung.com? When selecting the SM-P900 it does not offer any for download.
heldc said:
I'm having this same problem. I downloaded CF-Auto-Root-v1awifi-v1awifixx-smp900.zip from download.chainfire.eu. I extracted the zip file, leaving me with a tar.md5 file. I try to flash that file, and end up with multicolor bars across the screen, exactly like if the video card dies on a mobile.
Here's what Odin has output as of when the error occurs. It flashes up a big red failed in the upper left box.
Code:
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CF-Auto-Root-v1awifi-v1awifixx-smp900.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> recovery.img
<ID:0/005> NAND Write Start!!
<ID:0/005> cache.img
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/005> Removed!!
So I flashed the original recovery from http://forum.xda-developers.com/showpost.php?p=50492301&postcount=234 and got a working but unrooted tablet. And I flashed CF with both 3.09 and 3.07, with a flash back to stock before each. Same thing every time-picture of a dying video card, except display is fine once flashed back to stock. Pic of the display added, on the off chance it helps.
Click to expand...
Click to collapse
So this happened to me, and this is my first time rooting. I have the tar file for recovery. How do I proceed? I haven't unplugged my note pro, can I just put in the new file in the pda and start, or do I need to restart odin? Really kind of worried...

[Q] [HELP] GT-N8013 - Soft Bricked(ODIN MODE ONLY)

GT-N8013
Blue/Gray
16GB Wifi Only Model
I was watching a youtube video, my tablet froze for an hour, died, then I let it charge and it rebooted into the samsung logo. After that it decided to go white screen and goes to a white screen every time it's booted. I've been trying to resolve this on my own with various resources for about a month now.
I can get to ODIN mode no problem, but I can't flash anything. I have recently bought a new OEM Samsung USB cable and tried multiple versions of ODIN on two different machines. Directly connected to the motherboard and not USB 3.0 ports.
I think the solution to my problem may be answered:
Here: http://forum.xda-developers.com/showthread.php?t=2268735
or
Here: http://forum.xda-developers.com/showthread.php?t=2713297
It is hard for me to comprehend the English used in the first link as I think Authors first language is not English. I think what he is saying is that if ODIN is not working then you have to flash the PIT file via adb and a SD card, but I cannot access Recovery, and I don't recall fully how to use ADB in Downloading Mode, if that's possible at all. He also states I may need to downgrade my bootloader version based on the last ROM that I had on my tablet. If someone could educate me on that I'd appreciate it.
The 2nd link says I need the stock firmware for my country(I live in the U.S. of A.) and to nand erase all but I feel like that should be used as a last resort. I did download both N8013UEALI3(4.0.4) & N8013UEUCMI3(4.1.2) from sammobile.com though.
When I try to flash just a Recovery/ROM, with Autoreboot checked, I get the PIT error message below:
<ID:0/006> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> KIES_HOME_N8013UEALI3_N8013XARALI3_1081475_REV00_user_low_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006>
<ID:0/006> There is no PIT partition.
<OSM> All threads completed. (succeed 0 / failed 1)
When I try to flash a PIT by its self, with Auto Reboot & Re-partition checked, I get the error message:
<ID:0/007> Added!!
<ID:0/007> Odin v.3 engine (ID:7)..
<ID:0/007> File analysis..
<ID:0/007> SetupConnection..
<ID:0/007> Initialzation..
<ID:0/007> Set PIT file..
<ID:0/007> DO NOT TURN OFF TARGET!!
<ID:0/007>
<ID:0/007> Re-Partition operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
When I try to flash a PIT by its self, Re-partition checked, I get the error message:
<ID:0/007> Added!!
<ID:0/007> Odin v.3 engine (ID:7)..
<ID:0/007> File analysis..
<ID:0/007> SetupConnection..
<ID:0/007> Can't open the serial(COM) port.
<OSM> All threads completed. (succeed 0 / failed 1)
When I try to flash a PIT w/ Recovery/ROM, Re-partition Checked and Auto-Reboot checked, I get:
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> KIES_HOME_N8013UEALI3_N8013XARALI3_1081475_REV00_user_low_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Can't open the serial(COM) port.
<OSM> All threads completed. (succeed 0 / failed 1)
Any assitance would be greatly appreciated, I've been without my tablet for a month now. I have any backup, I don't recall the ROM I flashed because it was so long ago, but I'm pretty sure the version was Jellybean. I know my recoevry was one of the later CWM TouchScreen Rom recoverys but I can't recall the version. Thanks for any help, please let me know what information I'm lacking or what I can do, thank you all for your time.
Update
Any assistance would be greatly appreciated. I have tried to different PIT files for the PIT mapping and they both failed. Getting pretty desperate now. I can't even NAND Erase All, I gave that a shot and it failed:
When I select NAND Erase All, stock rom(4.0.4 or 4.1.2), Pit, & Re-Partition checked, Nand Erase all Checked, I get the following in ODIN 3.07 and 3.09:
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> KIES_HOME_N8013UEALI3_N8013XARALI3_1081475_REV00_user_low_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Erase...
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I'm starting to think its the ECCM and maybe I need a JTAG repair. Like I said before, I can't get into recovery, I just get a all white screen. When the tablet first died I got the Samsung logo and then it rebooted and went White, I never got the Samsung logo again. Any help please? Even if it's just recommendations for trusted JTAG repair sites, because I don't trust the ones I've found ths far. Or know PIT files that have worked for flashing on the N8013. Anything at all.
BUMP
I found this article here: http://www.sammobile.com/forum/showthread.php?t=23562
Exact same problem I am having, I think I'm going to need a JTAG repair. I just posted a request to get some fresh PIT files from multiple android versions. I ill keep posting updates on how this is going, I feel alone in this issue since no one has said anything but I get multiple views...but I see more and more people are starting to post in the help section for this particular brand of tablet in the past 3-5months, it sounds terrible but I'm glad I'm not alone since I feel like im talking to myself here.
Just contacted Mobiletechvideos guys, I hope they are legit. I'm will to pay $50 for a jtag repair if i can have this tablet back.
onlysafonne said:
I found this article here: http://www.sammobile.com/forum/showthread.php?t=23562
Exact same problem I am having, I think I'm going to need a JTAG repair. I just posted a request to get some fresh PIT files from multiple android versions. I ill keep posting updates on how this is going, I feel alone in this issue since no one has said anything but I get multiple views...but I see more and more people are starting to post in the help section for this particular brand of tablet in the past 3-5months, it sounds terrible but I'm glad I'm not alone since I feel like im talking to myself here.
Just contacted Mobiletechvideos guys, I hope they are legit. I'm will to pay $50 for a jtag repair if i can have this tablet back.
Click to expand...
Click to collapse
@onlysafonne what file fails? I see your log above
carl1961 said:
@onlysafonne what file fails?
Click to expand...
Click to collapse
I've tried to use both ODIN & Heimdall. All files are failing for me. I tried stock 4.0.4 & 4.1.2 Roms, 3 different PIT files, I even tried to NAND erase all with a stock rom and ODIN continues to fail for me. I installed a virutal box on multiple machines running XP SP3 since windows 7/8 weren't working for me as well, that failed as well. When I try to flash the PIT files I get the output from ODIN in my OP, nothing is working for me. I'm just thinking I experienced instant death on this tablet for no reason at all. The most success i've had is with Heimdall just being able to reboot the tablet for me and then go back to Downloading mode, but nothing else is responding for me.
I'f I can get some fresh pit files from fully operational devices I will know that I've done everything I can excluding JTAG repair myself. If I can't get some fresh PIT files from multiple android versions, then I might just have to send it to the Mobiletechvideos guys to see if they can repair.
Thanks for the reply and interest in my issue!
onlysafonne said:
I've tried to use both ODIN & Heimdall. All files are failing for me. I tried stock 4.0.4 & 4.1.2 Roms, 3 different PIT files, I even tried to NAND erase all with a stock rom and ODIN continues to fail for me. I installed a virutal box on multiple machines running XP SP3 since windows 7/8 weren't working for me as well, that failed as well. When I try to flash the PIT files I get the output from ODIN in my OP, nothing is working for me. I'm just thinking I experienced instant death on this tablet for no reason at all. The most success i've had is with Heimdall just being able to reboot the tablet for me and then go back to Downloading mode, but nothing else is responding for me.
I'f I can get some fresh pit files from fully operational devices I will know that I've done everything I can excluding JTAG repair myself. If I can't get some fresh PIT files from multiple android versions, then I might just have to send it to the Mobiletechvideos guys to see if they can repair.
Thanks for the reply and interest in my issue!
Click to expand...
Click to collapse
no I got the pit file from here http://forum.xda-developers.com/showthread.php?p=41158546#post41158546
tell me how to grab it and I will get it from my tablet now for you
Heimdall
carl1961 said:
no I got the pit file from here http://forum.xda-developers.com/showthread.php?p=41158546#post41158546
tell me how to grab it and I will get it from my tablet now for you
Click to expand...
Click to collapse
To download a copy of your PIT all you have to do is install Heimdall, with zadig driver (Samsung/General Device) , boot your tablet into Download mode, and download a copy of your PIT by going to Heimdall Frontend, clicking utilites, and downloading and saving your PIT to your desktop(or where ever you want) and uploading it for me.
Heimdall can be found here: http://glassechidna.com.au/heimdall/
After you are down with Heimdall, make sure you uninstall the driver from "Device Manager" in your USB Devices, that way, you can use ODIN again. A;; of this should only take about 5-10mins, as all the files are really small. i really appreciate this.
onlysafonne said:
To download a copy of your PIT all you have to do is install Heimdall, with zadig driver (Samsung/General Device) , boot your tablet into Download mode, and download a copy of your PIT by going to Heimdall Frontend, clicking utilites, and downloading and saving your PIT to your desktop(or where ever you want) and uploading it for me.
Heimdall can be found here: http://glassechidna.com.au/heimdall/
After you are down with Heimdall, make sure you uninstall the driver from "Device Manager" in your USB Devices, that way, you can use ODIN again. A;; of this should only take about 5-10mins, as all the files are really small. i really appreciate this.
Click to expand...
Click to collapse
@onlysafonne
ok I did it also a compair to My-N8013.pit that you said did not work, they or identical so that may be bad news for you.
thread
http://forum.xda-developers.com/showthread.php?t=1916936
PIT Magic v1.3.10 - Samsung PIT Creator, Editor, Analyzer
carl1961 said:
@onlysafonne
ok I did it also a compair to My-N8013.pit that you said did not work, they or identical so that may be bad news for you.
thread
http://forum.xda-developers.com/showthread.php?t=1916936
PIT Magic v1.3.10 - Samsung PIT Creator, Editor, Analyzer
Click to expand...
Click to collapse
Thank you for this post, that helps me alot, it appears it is beyond recovery via ODIN at this point. Thank you for taking the time to compare your PIT to the previous one. I will wait for Mobiletech to contact me back and post an update from there.
onlysafonne said:
Thank you for this post, that helps me alot, it appears it is beyond recovery via ODIN at this point. Thank you for taking the time to compare your PIT to the previous one. I will wait for Mobiletech to contact me back and post an update from there.
Click to expand...
Click to collapse
if you not under warenty I would maybe buy a used one on ebay that might just have a cracked screen, you might even find a 32GB one
http://www.ebay.com/itm/Samsung-Galaxy-Note-10-1-32-GB-Wi-Fi-GT-N8013-/361155880699?pt=US_Tablets&hash=item54169166fb
onlysafonne said:
Thank you for this post, that helps me alot, it appears it is beyond recovery via ODIN at this point. Thank you for taking the time to compare your PIT to the previous one. I will wait for Mobiletech to contact me back and post an update from there.
Click to expand...
Click to collapse
onlysafonne, I have the same problem. I can use Odin and get to CWM but nothing I flash will get me past the Samsung Galaxy Note 10.1 image I cannot even get it to shut off. It will go black then power right back up.
I have flashed with Nand Erase All checked only
KIES_HOME_N8013UEUCMI3_N8013XARCMI3_813049_REV00_u ser_low_ship.tar
Any ideas? I have not heard of JTAG
I have a N8010 and I'm also in this kind of bootloop.
Nothing works.
I had OmniRom 4.4.4 installed and the newest TWRP.
I only can get into Download Mode.
When I try to get into Recovery the blue TWRP Screen pops up for a second and then it's going back to "Samsung Galaxy Note 10.1" Logo.
I even tried to disassemble the battery. But this didn't work either.
Any ideas what I can do? If not, I'll have to take it to repair. Got some warranty left, but I rather fix it myself.
Thanks
Flying_Phil said:
I have a N8010 and I'm also in this kind of bootloop.
Nothing works.
I had OmniRom 4.4.4 installed and the newest TWRP.
I only can get into Download Mode.
When I try to get into Recovery the blue TWRP Screen pops up for a second and then it's going back to "Samsung Galaxy Note 10.1" Logo.
I even tried to disassemble the battery. But this didn't work either.
Any ideas what I can do? If not, I'll have to take it to repair. Got some warranty left, but I rather fix it myself.
Thanks
Click to expand...
Click to collapse
have you tryed to odin install your firmware? usally the bootloop is caused because you need to do a factory reset to get rid of (in your case OmniRom 4.4.4) your firmware as I see is http://www.sammobile.com/firmwares/confirm/31427/N8010XXUDNE4_N8010BTUDNF1_BTU.zip/
Yes, I did try that. Is still in bootloop afterwards. I also tried to flash stock recovery or cwm recovery. But there is still twrp.
I can't open your link :-/
Flying_Phil said:
Yes, I did try that. Is still in bootloop afterwards. I also tried to flash stock recovery or can recovery. But there is still twrp.
I can't open your link :-/
Click to expand...
Click to collapse
try this N8010 recovery with the included 3.07 odin put in PDA slot and do no check re-partiton look at picture
@Flying_Phil
yes samfirmware is picky go here and search your N8010 you most likly need to signup (it's free) and as you see most odin updates or "home" which means it does not do a factory reset which is ok if your updating a stock unrooted rom so you need to do a factory reset when coming from a custom rom.
well I tried to flash your attached file. Odin said "Pass!" but my Tablet still does the bootloop.
Like I said, I tried to flash several firmwares. All with this same result. First I tried the German version, then the Austrian and the Australian.
Now yours was the version for new zealand.
I have no clue, why this doesn't work.
Here is the log from Odin and I attached a screenshot.
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> PDA_N8010XXUDNK1_N8010NZCDNK1_Recovery.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> recovery.img
<ID:0/003> NAND Write Start!!
<ID:0/003> RQT_CLOSE !!
<ID:0/003> RES OK !!
<ID:0/003> Removed!!
<ID:0/003> Remain Port .... 0
<OSM> All threads completed. (succeed 1 / failed 0)
<ID:0/003> Added!!
Flying_Phil said:
well I tried to flash your attached file. Odin said "Pass!" but my Tablet still does the bootloop.
Like I said, I tried to flash several firmwares. All with this same result. First I tried the German version, then the Austrian and the Australian.
Now yours was the version for new zealand.
I have no clue, why this doesn't work.
Here is the log from Odin and I attached a screenshot.
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> PDA_N8010XXUDNK1_N8010NZCDNK1_Recovery.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> recovery.img
<ID:0/003> NAND Write Start!!
<ID:0/003> RQT_CLOSE !!
<ID:0/003> RES OK !!
<ID:0/003> Removed!!
<ID:0/003> Remain Port .... 0
<OSM> All threads completed. (succeed 1 / failed 0)
<ID:0/003> Added!!
Click to expand...
Click to collapse
ok so did you try and reboot to stock recovery and do a factory reset
carl1961 said:
ok so did you try and reboot to stock recovery and do a factory reset
Click to expand...
Click to collapse
sorry, I forgot to tell about it.
Yes I tried to go into Recovery, but there ist still TWRP on it and it still crashes after a second.
I even tried the flash without checking "Auto reboot", so I could boot directly into recovery, but it worked neither.
Flying_Phil said:
sorry, I forgot to tell about it.
Yes I tried to go into Recovery, but there ist still TWRP on it and it still crashes after a second.
I even tried the flash without checking "Auto reboot", so I could boot directly into recovery, but it worked neither.
Click to expand...
Click to collapse
ok lets backtrack
what is your tablets stock info? and or you 16 GB or 32 GB
carl1961 said:
ok lets backtrack
what is your tablets stock info? and or you 16 GB or 32 GB
Click to expand...
Click to collapse
GT-N8010 16GB. Need more?

Can't restore note 5 to stock

I am trying to restore my phone to stock because only stock modified rom works with VR, but doesn't play nice with android wear.
So back to stock I go, however when I put it in download mode load up AP with the file, and hit start it says "FAIL!" I have team win installed and that is how I get to download mode. I only had Auto Reboot and F. Reset time selected as well.
Can anyone advise me on what I may be doing wrong?
Here is the log:
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Binary Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin engine v(ID:3.1100)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> sboot.bin
<ID:0/004> NAND Write Start!!
<ID:0/004> cm.bin
<ID:0/004> FAIL!
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/004> Removed!!
Download the stock firmware again the one you're using might be corrupt, also make sure drivers are installed
I have the drivers installed, also tried 2 firmwares, trying one more now.
Was following this guide:
http://www.droidviews.com/restore-t-mobile-galaxy-note-5-sm-n920t-to-stock-5-1-1-lollipop-firmware/
no firmware seems to be working. I also tried a new cable and a few ports. No change.
tried a different odin, got a bit further but ran into the get PIT for mapping...
Seriously, whoever can get me back to stock, i'll send a paypal donation to say thanks.
Are you using 3.10.7?
I experienced the same problem. I was rooted, running whatever custom ROM my heart desired, but unable to flash to stock....until I tried one too many times and had a soft brick. After some research I found I needed a PAC file. You can get it here: http://dl.samfirm.net/page/2. There's not too much to say. Each segment is loaded seperately and take your time. If this works for you I'm happy for you and want nothing more than to help a fellow traveler.
Drachnem said:
tried a different odin, got a bit further but ran into the get PIT for mapping...
Seriously, whoever can get me back to stock, i'll send a paypal donation to say thanks.
Click to expand...
Click to collapse
How are you entering download mode?
Sent from my SM-N920T using Tapatalk
I've done it by using teamwin, also by holding pwr + home + volume down
guaneet said:
Are you using 3.10.7?
Click to expand...
Click to collapse
tried two...3.10.6, and 3.10.7
audscott said:
I experienced the same problem. I was rooted, running whatever custom ROM my heart desired, but unable to flash to stock....until I tried one too many times and had a soft brick. After some research I found I needed a PAC file. You can get it here: http://dl.samfirm.net/page/2. There's not too much to say. Each segment is loaded seperately and take your time. If this works for you I'm happy for you and want nothing more than to help a fellow traveler.
Click to expand...
Click to collapse
You have to pay 10.00 to download the files
Drachnem said:
You have to pay 10.00 to download the files
Click to expand...
Click to collapse
Last time I checked you donated if you wanted, not forced to
Drachnem said:
Last time I checked you donated if you wanted, not forced to
Click to expand...
Click to collapse
Donated to try this fix, hope it works...
Drachnem said:
You have to pay 10.00 to download the files
Click to expand...
Click to collapse
As I recollect the fee is for the latest PAC, the others are free.
So it got further with the files and the pit file, but it didn't seem to fully work and I want to understand what may be wrong. It said failed in the first box but continued then the next box said pass.
The phone is now booted in setup mode but I wanted to understand what i may run into with this error or if I am fine...
Here is the log:
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> ALL_TMB_N920TUVS2COKC_N920TTMB2COKC_CL5966591_QB7480468_REV00_user_low_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:1/004> Added!!
<ID:0/005> Odin engine v(ID:3.1005)..
<ID:1/004> Odin engine v(ID:3.1005)..
<ID:0/005> File analysis..
<ID:1/004> File analysis..
<ID:1/004> SetupConnection..
<ID:0/005> SetupConnection..
<ID:1/004> Initialzation..
<ID:1/004> Set PIT file..
<ID:1/004> DO NOT TURN OFF TARGET!!
<ID:1/004> Get PIT for mapping..
<ID:1/004> Firmware update start..
<ID:1/004> SingleDownload.
<ID:1/004> sboot.bin
<ID:1/004> NAND Write Start!!
<ID:1/004> param.bin
<ID:1/004> cm.bin
<ID:1/004> boot.img
<ID:1/004> recovery.img
<ID:1/004> system.img
<ID:0/005> Can't open the serial(COM) port.
<ID:1/004> modem.bin
<ID:1/004> cache.img
<ID:1/004> RQT_CLOSE !!
<ID:1/004> RES OK !!
<ID:1/004> Removed!!
<ID:1/004> Remain Port .... 1
<OSM> All threads completed. (succeed 1 / failed 1)
audscott said:
I experienced the same problem. I was rooted, running whatever custom ROM my heart desired, but unable to flash to stock....until I tried one too many times and had a soft brick. After some research I found I needed a PAC file. You can get it here: http://dl.samfirm.net/page/2. There's not too much to say. Each segment is loaded seperately and take your time. If this works for you I'm happy for you and want nothing more than to help a fellow traveler.
Click to expand...
Click to collapse
These files did end up working out, ran pit first then the other file. Gave me an error but seems to be working fine for now.
Thanks again.
Drachnem said:
These files did end up working out, ran pit first then the other file. Gave me an error but seems to be working fine for now.
Thanks again.
Click to expand...
Click to collapse
I don't often have an answer, but after being the benefactor of the knowledge and kindness of others through the years, I'm glad to help when I can.
Drachnem said:
I've done it by using teamwin, also by holding pwr + home + volume down
Click to expand...
Click to collapse
That's the problem you are using twrp enter download mode by volume up+pwr+home
Sent from my SM-N920T using Tapatalk
Drachnem said:
These files did end up working out, ran pit first then the other file. Gave me an error but seems to be working fine for now.
Thanks again.
Click to expand...
Click to collapse
Are you able to post the files here (if that doesn't violate an XDA rule)? Trying to get the old ones and they seems to be gone and really don't want to have to pay, but I guess I will if I have to.
Hey Guys,
Having an issue getting one of my Galaxy Note 5 (SM-N920T) back to stock. I am able to flash stock firmware in Odin 3.10.7 but the phone is bricked. When I flash any stock firmware the phone reboots and is stuck at the Note 5 Splash Screen. If i reboot into recovery and try to do the factory wipe it tells me it can't find "E:" and fails. Only way I can get the phone to boot is if I flash a rooted kernel. Then I noticed it says the Baseband is unknown in settings. I was going to try flashing through ADB but it tells me ADB is disabled, same with flashing from external storage. I cant even get it to reboot into bootloader. I am starting to think the phone needs IMEI repair..

Categories

Resources