Soft Brick Help? - AT&T Samsung Galaxy S II Skyrocket SGH-I727

I just got a SGS2 Skyrocket and was using odin. It didn't make any progress for 3 hours so I unplugged (I know not to but I didn't know an alternative either). Anyway, I am now getting the "Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again." Error message. I read in another thread that I should re-enter Odin to try to fix it, but I can no longer get into download mode. What's the next step here? I know this topic has been discussed, but I really want to make sure I do this right.

When you see that "error" screen you should be in download mode. If not do this. Pull battery and reinsert. Hold the up /down volume and plug in USB. Should kick you into download mode.
Sent from my SAMSUNG-SGH-I727 using xda premium

iLiberate said:
I just got a SGS2 Skyrocket and was using odin. It didn't make any progress for 3 hours so I unplugged (I know not to but I didn't know an alternative either). Anyway, I am now getting the "Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again." Error message. I read in another thread that I should re-enter Odin to try to fix it, but I can no longer get into download mode. What's the next step here? I know this topic has been discussed, but I really want to make sure I do this right.
Click to expand...
Click to collapse
I had the same issue.. your in download mode.. try pushing your rom of choice through odin again, but use a different usb port. Your basically still in download mode.
Sent from my SGH-T989 using Tapatalk

capcanuck said:
I had the same issue.. your in download mode.. try pushing your rom of choice through odin again, but use a different usb port. Your basically still in download mode.
Sent from my SGH-T989 using Tapatalk
Click to expand...
Click to collapse
Yup, despite the error message you're seeing you should still be able to flash the stock .tar. The phone won't look like it's doing anything--you'll still see the error message--but if Odin sees it you should be fine.
I had this happen to me too and it worked fine.

Well I am at the step where you insert the TAR file for the PDA slot on odin and I can only get this far:
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> boot.img
<ID:0/003> NAND Write Start!!
<ID:0/003> recovery.img
<ID:0/003> system.img.ext4
I used the i727 TAR instead of the i727R TAR file. That's the only thing I can imagine changing to make this work.
Am I suppose to be choosing a ROM at this point as well? Where do I get a pit file if I need one?

Here is process.
iLiberate said:
Well I am at the step where you insert the TAR file for the PDA slot on odin and I can only get this far:
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> boot.img
<ID:0/003> NAND Write Start!!
<ID:0/003> recovery.img
<ID:0/003> system.img.ext4
I used the i727 TAR instead of the i727R TAR file. That's the only thing I can imagine changing to make this work.
Am I suppose to be choosing a ROM at this point as well? Where do I get a pit file if I need one?
Click to expand...
Click to collapse

Same Problem
Hey im new at this and i'm having the same problem. my issue is i have the error message and did what you guys said and reattempted Odin. it recognizes the phone and says
<ID:0/004>Complete(Write) operation failed.
and above the yellow box in Odin is a red box that says Fail!
i have tried this a few times and this is the only result i get.
i think i might have done something wrong with the tar file, i downloaded the correct one and i used 7-Zip to convert the rar to tar and odin now recognizes the file but idk if i was supposed to do that. Any help is greatly appreciated!
sorry for being an idiot i figured out what i did wrong

Yes you must unzip the. 7z file the tar is inside. Unzip it with 7zip then run odin and select the unzips tar file in the pda section of odin

Related

Odin got stuck at initialization step

Hi,
I am a newbie and follow steps carefully to flash rom on my droid charge. I am using Odin 1.82 and CI510_VZW_EP1F_ALL_ONE-LTE-CP_REV3_user_CL300919_Rooted_Debloated.tar.md5 file. I am stucking at initialization step. Would you please give me advice? Thanks a lot.
vnt4356 said:
Hi,
I am a newbie and follow steps carefully to flash rom on my droid charge. I am using Odin 1.82 and CI510_VZW_EP1F_ALL_ONE-LTE-CP_REV3_user_CL300919_Rooted_Debloated.tar.md5 file. I am stucking at initialization step. Would you please give me advice? Thanks a lot.
Click to expand...
Click to collapse
Remove the battery before you go into download mode and put it back in once Odin recognizes your phone.
Yeah I got stuck there too...putting the battery back in worked wonders!
Yeah, it worked like a charm. Thanks for your help. Finally, I have my custom rom on my droid charge.
What do you do it f you have a devise that doesn't have a removable battery?
hi guys i have the same problem with sm-n900 note 3 but removing the battery does nothing please help me out
hazard209 said:
Remove the battery before you go into download mode and put it back in once Odin recognizes your phone.
Click to expand...
Click to collapse
my phone wont recognize it. how can I fix it. help me please
Sorry to hear that. Could you try using a different USB cable or PORT? Let the phone be connected in Odin mode and remove the battery. Wait for 2 - 5 minutes and assemble the battery again.
hazard209 said:
Remove the battery before you go into download mode and put it back in once Odin recognizes your phone.
Click to expand...
Click to collapse
i dont know exactly what you mean. I have a t399 that i´m trying to flash but if i withdraw the battery it won´t get recognized by the pc. please can you be a little more especific i´d be really grateful.
guys please help ??? when i try to flash stock rom on my device (samsung GT-S7582) odin stuck at Initialzation and i get this message :
<ID:0/004> Added!!
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Set PIT file..
<ID:0/004> DO NOT TURN OFF TARGET!!
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/004> Removed!!
i tried to set pit file but still get the same error !! what should i do
<ID:0/004> Added!!
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
guys its stuck on this please help

[Q] Soft bricked need help its my freinds phone

whenever i try to turn it on it gets the little phone followed with caution symbol followed with computer symbol it happened after tring to flash a recovery in odin a few times and kept failing and now whenever i try to flash stock rom from samsung or anything in odin it will say nand write fail
what am i supposed to do?
Go to imnuts.org
And download ee4 and pit file..
Run them at the same time.
I'm assuming that you know how to run odin.
And know to unzip the ee4
And so on..
Select PDA
SENT FROM THE DOG POUND
i downloaded ep4 and tried to flash it but i didnt use a pit and it said nand write fail
Removed!!
<ID:0/008> Added!!
<ID:0/008> Odin v.3 engine (ID:8)..
<ID:0/008> File analysis..
<ID:0/008> SetupConnection..
<ID:0/008> Initialzation..
<ID:0/008> Set PIT file..
<ID:0/008> DO NOT TURN OFF TARGET!!
<ID:0/008> Removed!!
<ID:0/008> Re-Partition operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
and its been pluged in everytime
i flashed tweaked 3.0 odin style and now it wont even show splash screen it only goes to download mode
jett1217 said:
i flashed tweaked 3.0 odin style and now it wont even show splash screen it only goes to download mode
Click to expand...
Click to collapse
Did yu put Yur battery back in after going to download mode?...and check the pit file box?
simply tweaked 3.0
of course i put my battery back in
jett1217 said:
of course i put my battery back in
Click to expand...
Click to collapse
Sounds like Yur doing a good job then...keep going
simply tweaked 3.0
Did you check Re-Partition and un-check Auto Reboot and F. Reset Time?
Click on Pit and add your Pit file.
Verify the MD5 checksum before you added the EP4 file into PDA. Bad downloads do happen sometimes.
Pull the battery to enter download mode then replace it before flashing. That nand write fail thing is what happens if you flash without the battery.
jett1217 said:
of course i put my battery back in
Click to expand...
Click to collapse
did you try a different USB cord or rebooting your computer? (I know it sounds silly, but changing the cord worked for me and others)

Cannot figure out this brick...

I have a soft bricked S3 thats really stumped me. Its hanging at the verizon boot video so i figured i would just ODIN back to stock and be done with it. Everytime i try to flash VRALEC.bootchain.tar.md5 i fail. I tried to flash stock.vzw_root66 and i fail. I tried to flash COMBINATION_I535VRBLK3_I535VZWBLK3_381038_REV09_user_low_ship.tar.md5 and i fail. Ive tried different cables and different USB ports but i cant get odin to flash anything. Please help lol. I am using a NON rooted device.
heyitsdan03 said:
I have a soft bricked S3 thats really stumped me. Its hanging at the verizon boot video so i figured i would just ODIN back to stock and be done with it. Everytime i try to flash VRALEC.bootchain.tar.md5 i fail. I tried to flash stock.vzw_root66 and i fail. I tried to flash COMBINATION_I535VRBLK3_I535VZWBLK3_381038_REV09_user_low_ship.tar.md5 and i fail. Ive tried different cables and different USB ports but i cant get odin to flash anything. Please help lol. I am using a NON rooted device.
Click to expand...
Click to collapse
Are you putting the .tar file in the PDA slot in Odin?
Is your phone in download mode?
What base was you phone when it was working? ICS or JB?
If ICS stick with flashing root66 ICS for now (not any bootchains or modems) so that we can focus of getting your phone working first before any type of upgrade.
Also, if you cannot restore your phone by simply flashing root66 in Odin, follow this guide HOW-TO Unbrick Your Soft-Bricked Galaxy S III
corbn89 said:
Are you putting the .tar file in the PDA slot in Odin?
Is your phone in download mode?
What base was you phone when it was working? ICS or JB?
If ICS stick with flashing root66 ICS for now (not any bootchains or modems) so that we can focus of getting your phone working first before any type of upgrade.
Also, if you cannot restore your phone by simply flashing root66 in Odin, follow this guide HOW-TO Unbrick Your Soft-Bricked Galaxy S III
Click to expand...
Click to collapse
I am a base ICS and yes i have the phone in download mode, and i am using the pda slot but i cant get anything at all to flash sucessfully. That is the guide that i got the files from and i cant even get the first file to flash....
1.Open up ODIN
2.Select only the following box: F. Reset Time
3.Flash the VRALEC bootchain in the PDA section and wait for a PASS message
Thats where i get a fail message
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> aboot.mbn
<ID:0/005> NAND Write Start!!
<ID:0/005> FAIL!
<OSM> All threads completed. (succeed 0 / failed 1)
heyitsdan03 said:
I am a base ICS and yes i have the phone in download mode, and i am using the pda slot but i cant get anything at all to flash sucessfully. That is the guide that i got the files from and i cant even get the first file to flash....
1.Open up ODIN
2.Select only the following box: F. Reset Time
3.Flash the VRALEC bootchain in the PDA section and wait for a PASS message
Thats where i get a fail message
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> aboot.mbn
<ID:0/005> NAND Write Start!!
<ID:0/005> FAIL!
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
Did you check your MD5's? Also, just confirming that you already tried to restore by flashing root66 .tar in PDA with only Auto Reboot and F. Reset checked off? Also, read the second post in that guide and see if your symptoms are similar to the guide's second brick scenario.
corbn89 said:
Did you check your MD5's? Also, just confirming that you already tried to restore by flashing root66 .tar in PDA with only Auto Reboot and F. Reset checked off? Also, read the second post in that guide and see if your symptoms are similar to the guide's second brick scenario.
Click to expand...
Click to collapse
Yes i tried to flash just the root66 and this is what i get:
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> boot.img
<ID:0/005> NAND Write Start!!
<ID:0/005> recovery.img
<ID:0/005> system.img.ext4
<ID:0/005> FAIL! (WP)
<OSM> All threads completed. (succeed 0 / failed 1)
And i also tried the other guys post and this is what i get there:
<ID:0/005> Added!!
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Set PIT file..
<ID:0/005> DO NOT TURN OFF TARGET!!
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> boot.img
<ID:0/005> NAND Write Start!!
<ID:0/005> recovery.img
<ID:0/005> system.img.ext4
<ID:0/005> FAIL! (WP)
<OSM> All threads completed. (succeed 0 / failed 1)
What were you doing when it hung at the Verizon splash screen(what caused the brick)?
letinsh said:
What were you doing when it hung at the Verizon splash screen(what caused the brick)?
Click to expand...
Click to collapse
This is a friend of mines phone and from what i understand she was doing the jellybean update and it lost power in the middle of it
heyitsdan03 said:
This is a friend of mines phone and from what i understand she was doing the jellybean update and it lost power in the middle of it
Click to expand...
Click to collapse
Have you tried resetting the phone via the stock recovery?
corbn89 said:
Have you tried resetting the phone via the stock recovery?
Click to expand...
Click to collapse
stock recovery wont boot
you're using Odin v3.07?
---------- Post added at 03:45 PM ---------- Previous post was at 03:40 PM ----------
wait.
Stock recovery won't load, but you can get into download mode?
letinsh said:
you're using Odin v3.07?
---------- Post added at 03:45 PM ---------- Previous post was at 03:40 PM ----------
wait.
Stock recovery won't load, but you can get into download mode?
Click to expand...
Click to collapse
Yes, recovery wont boot but i can get into download mode, and i am using odin 3.07
Maybe this will help, i tried for the hell of it to boot normal and now it will go past the splash screen and come up to an "encryption failed" error with a reset button. The reset button does nothing..
have you tried getting into recover since the Odin flash failed?
Also, do you have Kies running on your computer? When using Odin, kies needs to be disabled.
---------- Post added at 04:14 PM ---------- Previous post was at 04:05 PM ----------
A little different approach.
this thread: http://forum.xda-developers.com/showthread.php?t=1974114
Try the VRBLK3 files (official vzw jb).
Yes i just tried again and nothing... and no i dont have kies even installed
letinsh said:
have you tried getting into recover since the Odin flash failed?
Also, do you have Kies running on your computer? When using Odin, kies needs to be disabled.
---------- Post added at 04:14 PM ---------- Previous post was at 04:05 PM ----------
A little different approach.
this thread: http://forum.xda-developers.com/showthread.php?t=1974114
Try the VRBLK3 files (official vzw jb).
Click to expand...
Click to collapse
This is what i get when i flash VRBLK3
<ID:0/005> Added!!
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> recovery.img
<ID:0/005> NAND Write Start!!
<ID:0/005> FAIL! (Auth)
<OSM> All threads completed. (succeed 0 / failed 1)
heyitsdan03 said:
This is what i get when i flash VRBLK3
<ID:0/005> Added!!
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> recovery.img
<ID:0/005> NAND Write Start!!
<ID:0/005> FAIL! (Auth)
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
That's the file you mentioned in the OP or the one I just pointed you to (different files)?
That last one was the file you pointed to me and yes they were different files, neither one work.
Flash this (stock bootchain) in PDA: http://truelinux.net/sch-i535/bootchains/BOOTLOADER_I535VRALF2_618049_REV09_user_low_ship.tar.md5
then download this (stock rom), unzip it, and flash in PDA:
http://goo.im/devs/invisiblek/i535/...535VZWALG1_743127_REV09_user_low_ship.tar.zip
Having so many files fail with an Odin flash makes me think the error is caused by something else, though...
What else could it be?
Sent from my SAMSUNG-SGH-I747 using xda premium
Honestly, we've reached the limit of my experience. Must issues with Odin result from the physical connection. I know you tried different cords and different ports. I assume you're doing this, but make sure your usb cable is plugged into a port on the motherboard, not a hub or remote port.
I honestly don't know what the next step is... Reinstall drivers and Odin?
Sent from my SCH-I535 using xda app-developers app

note 10.1 is blocked in booting

hello
I have the Samsung Galaxy Note 10.1 in 8013 16 GO there, exactly.
I intallé anderoid jelly bean 4.1.1 OTA and did not finish the tablet and restart nonstop. I started handling but nothing goes as planned, ODIN said fail Action! and my tablet is in download mode. And when I reboot I have a small andriod man with the percentage bar with the screen that pops by gray bars. suddenly I think I scrub the tablet and I do not really know what
thank you in advance for helping me because odin know my tablet (the tablet comes into download mode and not in recovry mode) it may not complete the installation with the following message:
<ID:0/006> Added!!
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> boot.img
<ID:0/006> NAND Write Start!!
<ID:0/006> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
3achour said:
hello
I have the Samsung Galaxy Note 10.1 in 8013 16 GO there, exactly.
I intallé anderoid jelly bean 4.1.1 OTA and did not finish the tablet and restart nonstop. I started handling but nothing goes as planned, ODIN said fail Action! and my tablet is in download mode. And when I reboot I have a small andriod man with the percentage bar with the screen that pops by gray bars. suddenly I think I scrub the tablet and I do not really know what
thank you in advance for helping me because odin know my tablet (the tablet comes into download mode and not in recovry mode) it may not complete the installation with the following message:
<ID:0/006> Added!!
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> boot.img
<ID:0/006> NAND Write Start!!
<ID:0/006> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
Re download factory rom and flash again in odin.. . You can also go in the recovery and clear cache and so on.. This will often stop a boot look . But it looks like you have a bad d/load
I'd agree with that.
I find it best to download the roms from Sammobile as they generally provide an MD5 sum you can check to make sure its not a bad download. Especially when using ODIN 4.03/07... ODIN 4.03 does the check before it flashes and ODIN 4.07 checks when the .tar file is selected.
temp
how temp for odin finish their installation
I think it's hang on: "<ID:0/006> NAND Write Start!! "
erica_renee said:
Re download factory rom and flash again in odin.. . You can also go in the recovery and clear cache and so on.. This will often stop a boot look . But it looks like you have a bad d/load
Click to expand...
Click to collapse
I have not access in the recovery mode
3achour said:
how temp for odin finish their installation
I think it's hang on: "<ID:0/006> NAND Write Start!! "
Click to expand...
Click to collapse
odin did not finish the installation process about 2 hours and even post thank you for helping me
You need to download the rom again to see if it's not a corrupted copy. Use a PC to download it from sammobile.com.
If the flash file you are using is corrupt you can flash it til this century ends and it won't work...
If it still doesn't get past nand write then I believe you may need a pit file to repartition your internal memory. THIS IS A VERY DANGEROUS OPERATION. Make sure you have the correct pit file and if possible get it with an MD5 checksum so you know there is nothing wrong with the downloaded file. It MUST be for your device or bricking may occur, it MUST not be corrupted or bricking will occur.
Good luck and remember, you have been warned...

get information dead S6

hi, on monday my s6 model G920I fell on the floor, and stop working. so i took it to he shop and they replace the battery, today my phone is dead and now they tell is the board, i needs to be replace..... but i dont trust it because i the board was okay, i should have damage.
now my phones stays freeze on the samsung s6 logo and only get into dowload mode... doesnt let me get to recovery phone.
i have already, flash, install custom rom and stock room. still doesnt respond.....
i need to know if there another way to recover and find out if the imei change, so i can identify if he shop replace the board to a non working one so they could charge me to change it
thanks
ebikok said:
hi, on monday my s6 model G920I fell on the floor, and stop working. so i took it to he shop and they replace the battery, today my phone is dead and now they tell is the board, i needs to be replace..... but i dont trust it because i the board was okay, i should have damage.
now my phones stays freeze on the samsung s6 logo and only get into dowload mode... doesnt let me get to recovery phone.
i have already, flash, install custom rom and stock room. still doesnt respond.....
i need to know if there another way to recover and find out if the imei change, so i can identify if he shop replace the board to a non working one so they could charge me to change it
thanks
Click to expand...
Click to collapse
install 4 file stock rom with pit file maybe this helps and in odin select phone bootloader update maybe bootloader is causing it
enesuzun2002 said:
install 4 file stock rom with pit file maybe this helps and in odin select phone bootloader update maybe bootloader is causing it
Click to expand...
Click to collapse
the problem is that the stock rom comes in one md5 file
ebikok said:
the problem is that the stock rom comes in one md5 file
Click to expand...
Click to collapse
use this method to create 4 file rom http://forum.gsmhosting.com/vbb/f77...4-file-multi-firmware-your-own-100-a-1860706/
and then find a pit file you are done
enesuzun2002 said:
use this method to create 4 file rom http://forum.gsmhosting.com/vbb/f77...4-file-multi-firmware-your-own-100-a-1860706/
and then find a pit file you are done
Click to expand...
Click to collapse
i did it now this is what odin says
<ID:0/003> Odin engine v(ID:3.1203)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> sboot.bin
<ID:0/003> FAIL!
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
and the cell put in red letter sw rev chechk fail device3 binary 1
ebikok said:
i did it now this is what odin says
<ID:0/003> Odin engine v(ID:3.1203)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> sboot.bin
<ID:0/003> FAIL!
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
and the cell put in red letter sw rev chechk fail device3 binary 1
Click to expand...
Click to collapse
you are trying to install a old android version your bootloader have 3. security patch so you have to install a 3th security firmware please try a newer firmware or try smart switch maybe it works
I tried the smart switch emergency repair and after loading successfully it's reboots and stay in the logo screen

Categories

Resources