I have a soft bricked S3 thats really stumped me. Its hanging at the verizon boot video so i figured i would just ODIN back to stock and be done with it. Everytime i try to flash VRALEC.bootchain.tar.md5 i fail. I tried to flash stock.vzw_root66 and i fail. I tried to flash COMBINATION_I535VRBLK3_I535VZWBLK3_381038_REV09_user_low_ship.tar.md5 and i fail. Ive tried different cables and different USB ports but i cant get odin to flash anything. Please help lol. I am using a NON rooted device.
heyitsdan03 said:
I have a soft bricked S3 thats really stumped me. Its hanging at the verizon boot video so i figured i would just ODIN back to stock and be done with it. Everytime i try to flash VRALEC.bootchain.tar.md5 i fail. I tried to flash stock.vzw_root66 and i fail. I tried to flash COMBINATION_I535VRBLK3_I535VZWBLK3_381038_REV09_user_low_ship.tar.md5 and i fail. Ive tried different cables and different USB ports but i cant get odin to flash anything. Please help lol. I am using a NON rooted device.
Click to expand...
Click to collapse
Are you putting the .tar file in the PDA slot in Odin?
Is your phone in download mode?
What base was you phone when it was working? ICS or JB?
If ICS stick with flashing root66 ICS for now (not any bootchains or modems) so that we can focus of getting your phone working first before any type of upgrade.
Also, if you cannot restore your phone by simply flashing root66 in Odin, follow this guide HOW-TO Unbrick Your Soft-Bricked Galaxy S III
corbn89 said:
Are you putting the .tar file in the PDA slot in Odin?
Is your phone in download mode?
What base was you phone when it was working? ICS or JB?
If ICS stick with flashing root66 ICS for now (not any bootchains or modems) so that we can focus of getting your phone working first before any type of upgrade.
Also, if you cannot restore your phone by simply flashing root66 in Odin, follow this guide HOW-TO Unbrick Your Soft-Bricked Galaxy S III
Click to expand...
Click to collapse
I am a base ICS and yes i have the phone in download mode, and i am using the pda slot but i cant get anything at all to flash sucessfully. That is the guide that i got the files from and i cant even get the first file to flash....
1.Open up ODIN
2.Select only the following box: F. Reset Time
3.Flash the VRALEC bootchain in the PDA section and wait for a PASS message
Thats where i get a fail message
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> aboot.mbn
<ID:0/005> NAND Write Start!!
<ID:0/005> FAIL!
<OSM> All threads completed. (succeed 0 / failed 1)
heyitsdan03 said:
I am a base ICS and yes i have the phone in download mode, and i am using the pda slot but i cant get anything at all to flash sucessfully. That is the guide that i got the files from and i cant even get the first file to flash....
1.Open up ODIN
2.Select only the following box: F. Reset Time
3.Flash the VRALEC bootchain in the PDA section and wait for a PASS message
Thats where i get a fail message
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> aboot.mbn
<ID:0/005> NAND Write Start!!
<ID:0/005> FAIL!
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
Did you check your MD5's? Also, just confirming that you already tried to restore by flashing root66 .tar in PDA with only Auto Reboot and F. Reset checked off? Also, read the second post in that guide and see if your symptoms are similar to the guide's second brick scenario.
corbn89 said:
Did you check your MD5's? Also, just confirming that you already tried to restore by flashing root66 .tar in PDA with only Auto Reboot and F. Reset checked off? Also, read the second post in that guide and see if your symptoms are similar to the guide's second brick scenario.
Click to expand...
Click to collapse
Yes i tried to flash just the root66 and this is what i get:
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> boot.img
<ID:0/005> NAND Write Start!!
<ID:0/005> recovery.img
<ID:0/005> system.img.ext4
<ID:0/005> FAIL! (WP)
<OSM> All threads completed. (succeed 0 / failed 1)
And i also tried the other guys post and this is what i get there:
<ID:0/005> Added!!
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Set PIT file..
<ID:0/005> DO NOT TURN OFF TARGET!!
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> boot.img
<ID:0/005> NAND Write Start!!
<ID:0/005> recovery.img
<ID:0/005> system.img.ext4
<ID:0/005> FAIL! (WP)
<OSM> All threads completed. (succeed 0 / failed 1)
What were you doing when it hung at the Verizon splash screen(what caused the brick)?
letinsh said:
What were you doing when it hung at the Verizon splash screen(what caused the brick)?
Click to expand...
Click to collapse
This is a friend of mines phone and from what i understand she was doing the jellybean update and it lost power in the middle of it
heyitsdan03 said:
This is a friend of mines phone and from what i understand she was doing the jellybean update and it lost power in the middle of it
Click to expand...
Click to collapse
Have you tried resetting the phone via the stock recovery?
corbn89 said:
Have you tried resetting the phone via the stock recovery?
Click to expand...
Click to collapse
stock recovery wont boot
you're using Odin v3.07?
---------- Post added at 03:45 PM ---------- Previous post was at 03:40 PM ----------
wait.
Stock recovery won't load, but you can get into download mode?
letinsh said:
you're using Odin v3.07?
---------- Post added at 03:45 PM ---------- Previous post was at 03:40 PM ----------
wait.
Stock recovery won't load, but you can get into download mode?
Click to expand...
Click to collapse
Yes, recovery wont boot but i can get into download mode, and i am using odin 3.07
Maybe this will help, i tried for the hell of it to boot normal and now it will go past the splash screen and come up to an "encryption failed" error with a reset button. The reset button does nothing..
have you tried getting into recover since the Odin flash failed?
Also, do you have Kies running on your computer? When using Odin, kies needs to be disabled.
---------- Post added at 04:14 PM ---------- Previous post was at 04:05 PM ----------
A little different approach.
this thread: http://forum.xda-developers.com/showthread.php?t=1974114
Try the VRBLK3 files (official vzw jb).
Yes i just tried again and nothing... and no i dont have kies even installed
letinsh said:
have you tried getting into recover since the Odin flash failed?
Also, do you have Kies running on your computer? When using Odin, kies needs to be disabled.
---------- Post added at 04:14 PM ---------- Previous post was at 04:05 PM ----------
A little different approach.
this thread: http://forum.xda-developers.com/showthread.php?t=1974114
Try the VRBLK3 files (official vzw jb).
Click to expand...
Click to collapse
This is what i get when i flash VRBLK3
<ID:0/005> Added!!
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> recovery.img
<ID:0/005> NAND Write Start!!
<ID:0/005> FAIL! (Auth)
<OSM> All threads completed. (succeed 0 / failed 1)
heyitsdan03 said:
This is what i get when i flash VRBLK3
<ID:0/005> Added!!
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> recovery.img
<ID:0/005> NAND Write Start!!
<ID:0/005> FAIL! (Auth)
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
That's the file you mentioned in the OP or the one I just pointed you to (different files)?
That last one was the file you pointed to me and yes they were different files, neither one work.
Flash this (stock bootchain) in PDA: http://truelinux.net/sch-i535/bootchains/BOOTLOADER_I535VRALF2_618049_REV09_user_low_ship.tar.md5
then download this (stock rom), unzip it, and flash in PDA:
http://goo.im/devs/invisiblek/i535/...535VZWALG1_743127_REV09_user_low_ship.tar.zip
Having so many files fail with an Odin flash makes me think the error is caused by something else, though...
What else could it be?
Sent from my SAMSUNG-SGH-I747 using xda premium
Honestly, we've reached the limit of my experience. Must issues with Odin result from the physical connection. I know you tried different cords and different ports. I assume you're doing this, but make sure your usb cable is plugged into a port on the motherboard, not a hub or remote port.
I honestly don't know what the next step is... Reinstall drivers and Odin?
Sent from my SCH-I535 using xda app-developers app
Related
Hi all,
Today I upgraded from a Thunderbolt to an S3, and before I even left the store the guy was upgrading to the latest version of 4.1.2 which came out a few days ago.
I've been following this tutorial, which is basically the same as all the other tutorials - install Samsung USB drivers on Windows machine, download CF-Root-SGS3-v6.4.tar and use ODIN 3.04 or 1.85 to flash while in download mode.
I've done all that, and when I use either version of ODIN, I get the following:
<ID:0/004> Added!!
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> recovery.img
<ID:0/004> NAND Write Start!!
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<ID:0/004> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
I don't even get a green light in 3.04 - just a blue light. In 1.85 I get a yellow light.
I see this on my phone:
SECURE CHECK FAIL: recovery
I see this on the phone's screen twice, as I tried to flash it with ODIN 3.04 and 1.85.
Any ideas? Could this be a direct result of the most recent software update?
Thanks in advance for any light shed on this issue.
Since I have a low post count I am unable to post the link, but it was on droidviews.
djcronos said:
Since I have a low post count I am unable to post the link, but it was on droidviews.
Click to expand...
Click to collapse
As you do not have I9300 any firmware root from this I9300 forum may brick your not a I9300 phone ,read the sticky top of the page please .
jje
Jee speaks the truth. Even though you have a galaxy S3 the original s3 in Europe is not the same as here in the states (i535). I went into the development section of xda in the i535 Verizon section and d/l the tar file foe my phone. Worked great with Odin
Sent from my SCH-I535 using Tapatalk 2
djcronos said:
Hi all,
Today I upgraded from a Thunderbolt to an S3, and before I even left the store the guy was upgrading to the latest version of 4.1.2 which came out a few days ago.
I've been following this tutorial, which is basically the same as all the other tutorials - install Samsung USB drivers on Windows machine, download CF-Root-SGS3-v6.4.tar and use ODIN 3.04 or 1.85 to flash while in download mode.
I've done all that, and when I use either version of ODIN, I get the following:
<ID:0/004> Added!!
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> recovery.img
<ID:0/004> NAND Write Start!!
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<ID:0/004> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
...
SECURE CHECK FAIL: recovery
Click to expand...
Click to collapse
Same thing here.
Verizon GS3 sch-I535
Android version: 4.1.2
Build: JZO54K.I535VRBMB1
It fails after the build chain while trying to flash recovery.
Any help would be appreciated!
http://forum.xda-developers.com/showthread.php?t=2046439
Try this method!
djcronos said:
Hi all,
Today I upgraded from a Thunderbolt to an S3, and before I even left the store the guy was upgrading to the latest version of 4.1.2 which came out a few days ago.
I've been following this tutorial, which is basically the same as all the other tutorials - install Samsung USB drivers on Windows machine, download CF-Root-SGS3-v6.4.tar and use ODIN 3.04 or 1.85 to flash while in download mode.
I've done all that, and when I use either version of ODIN, I get the following:
<ID:0/004> Added!!
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> recovery.img
<ID:0/004> NAND Write Start!!
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<ID:0/004> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
I don't even get a green light in 3.04 - just a blue light. In 1.85 I get a yellow light.
I see this on my phone:
SECURE CHECK FAIL: recovery
I see this on the phone's screen twice, as I tried to flash it with ODIN 3.04 and 1.85.
Any ideas? Could this be a direct result of the most recent software update?
Thanks in advance for any light shed on this issue.
Click to expand...
Click to collapse
here is "how to" just to root your new phone without unlocking and flashing bootloader etc...check post#6
http://forum.xda-developers.com/show...9#post39980019
djteotancolis said:
http://forum.xda-developers.com/showthread.php?t=2046439
Try this method!
Click to expand...
Click to collapse
This works, I am running 4.1.2 and was able to root, unlock and flash. Very easy
Sent from my SCH-I535 using Tapatalk 2
Hello,
I'm having problem flashing the orignal firmware package for galaxy Y.
I'm using ODIN v1.85 And downloaded the (Indian) firmware packages form [URL="http://forum.xda-developers.com/showthread.php?t=1465800"[/URL]
It gives me the following messages:
<ID:0/005> Added!!
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> boot.img
<ID:0/005> NAND Write Start!!
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
When I restart my phone it would boot into in custom ROM.
Screen shots attached...
Please help me....
Thank you.
Try flashing it again with another odin file/firmware. Did you a get a green progress bar on your phone while odin process was going on?
Use the odin i am giving here.
https://www.dropbox.com/s/tc32llywhly4nb0/Odin3-v1.85.zip
______________________________________
A HeRo can be AnyOne....© even a PO TA TOE....
Thank you very much i actually flashed another package and its done thanks for your help.:laugh::good:
Just as an added note, always make sure you do an MD5 check on anything you are about to flash in Odin.
I am trying to download the Clockworkmod Recovery via Odin and it consistently fails. I have check many threads and cannot find a solution!
-Phone: Samsung Galaxy SIII SCH-1535
-Carrier: Verizon
-Odin: Tried using 3.07 and 3.04
-Clockworkmod: At first I was using a .tar file or version 5.0.2.8, then I tried using a .tar.md5 version of the same. Then I tried using a .tar.md5 version of 6.0.1.0.
-I am running Windows 7
The results in Odin are as follows:
-PDA checked and file loaded
-Options: Auto Reboot and F. Reset Time
Odin 3.07:
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> recovery.img
<ID:0/005> NAND Write Start!!
<ID:0/005> FAIL! (Auth)
<ID:0/005> All threads completed. (succeed 0 / failed 1)
Odin 3.04:
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> recovery.img
<ID:0/005> NAND Write Start!!
<ID:0/005>
<ID:0/005> Completed(Write) operation failed.
<ID:0/005> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
On my phone, it reads: SECURE CHECK FAIL: recovery
Edit:
History...I had Clockworkmod installed previously.
I was downloading CyanogenMod from Rom Manager and it bricked. I unbricked it with
VRALEC.bootchain.tar.md5
BOOTLOADER_I535VRALF2_618049_REV09_user_low_ship.tar.md5
stock.vzw_root66.7z.torrent
Updated to Jellybean 4.04
Stumped.
After unbricking your phone, did you unlock the bootloader again? It needs to be unlocked to flash custom recovery.
dustin_b said:
After unbricking your phone, did you unlock the bootloader again? It needs to be unlocked to flash custom recovery.
Click to expand...
Click to collapse
-_-
Thanks...
So I messed up my s7 by flashing a wrong version of xposed and now I can't go back to stock.
Trying to flash it through Odin but I get a "sw rev check fail" message
Please help :'(
marcotics said:
So I messed up my s7 by flashing a wrong version of xposed and now I can't go back to stock.
Trying to flash it through Odin but I get a "sw rev check fail" message
Please help :'(
Click to expand...
Click to collapse
Are you sure you are flashing correct firmware and the latest version?
Yes, I'm trying to flash G930TUVS2APB8
Should I only do "AP"? Or try all four files?
What do I do in the CSC field? Load the CSC or HOME_CSC file?
Should I try the special Odin by PrinceComsy or 3.11?
This is what I get on Odin
<ID:0/006> Odin engine v(ID:3.1203)..
<ID:0/006> File analysis..
<ID:0/006> skip file list for home binary
<ID:0/006> persist.img.ext4
<ID:0/006> Home Binary Download
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> SingleDownload.
<ID:0/006> emmc_appsboot.mbn
<ID:0/006> lksecapp.mbn
<ID:0/006> FAIL! (Auth)
<ID:0/006>
<ID:0/006> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
This is what shows up on Odin
Fixed the problem!!! thanks
What was the solution? I'm having this issue as well
Try going into recovery and factory reset(wipe data)
It got fixed by using my pc rather than my laptop (had same drivers installed so no idea)
Also downloaded the absolute latest firmware from sammobile and latest Odin
Hope you can fix your problem man.
Note: if it doesnt let you flash stock I read that it may be because you're trying to flash something older, by default you cannot downgrade on s7
Iv tried Odin with all Bl,AP,CP, and CSC Packages it keeps saying FAIL! (Auth) then a blank log then Complete(Write) operation failed.
For the Samsung smart switch the phone us supported. I have the latest verison and my phone is a Galaxy S7 (Us Cellular) Model: SM-G930R4 still says its not supported.
Im stuck idk what to do and i just want my phone working again! Thank you for the help!
Update: Phone wont enter Recovery Mode nor will start just download mode.
Update: got in to show me i need smart switch recovery. Its says my device is not supported and when i try to recovery feature my phone doesn't appear.
When I apply all BL,Ap ect. It shows
SW REC CHECK FAIL: [aboot]Fused 4 > binary 2
[1] eMMC: write Fail: aboot
When just flashing the AP with odin these are the logs
<ID:0/005> Added!!
<ID:0/005> Odin engine v(ID:3.1203)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> boot.img
<ID:0/005> recovery.img
<ID:0/005> system.img.ext4
<ID:0/005> FAIL! (Auth)
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Its stuck in on the screen telling me to use smart switch pc software
Wont start to boot or go to recovery.
Tried odin start with re-partion and these are the logs farthest i gotten with no errors popping up on my phone
<ID:0/005> Added!!
<ID:0/005> Odin engine v(ID:3.1203)..
<ID:0/005> File analysis..
<ID:0/005> skip file list for home binary
<ID:0/005> persist.img.ext4
<ID:0/005> Home Binary Download
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Set PIT file..
<ID:0/005> DO NOT TURN OFF TARGET!!
<ID:0/005> Can't open the specified file. (Line: 1831)
<OSM> All threads completed. (succeed 0 / failed 1)
Try using the modded "Prince Cosmy Odin" with stock firmware first
If that fails, try following this
https://forum.xda-developers.com/galaxy-s7/how-to/unbrick-s7-snapdragon-trying-to-to-t3697441
*Detection* said:
Try using the modded "Prince Cosmy Odin" with stock firmware first
If that fails, try following this
https://forum.xda-developers.com/galaxy-s7/how-to/unbrick-s7-snapdragon-trying-to-to-t3697441
Click to expand...
Click to collapse
I have been using the modded one this entire time does that mean anything?
*Detection* said:
Try using the modded "Prince Cosmy Odin" with stock firmware first
If that fails, try following this
https://forum.xda-developers.com/galaxy-s7/how-to/unbrick-s7-snapdragon-trying-to-to-t3697441
Click to expand...
Click to collapse
I attempted to follow that link so i when through the steps came to step two of downloads and had to find a S7 Snapdragon Root .tar so i did and found this XDA forum https://forum.xda-developers.com/verizon-s7-edge/how-to/root-method-nougat-t3566978 which was the first thing on google searching for the snapdragon.
I followed those steps and i for the error Secure check fail : Boot
I was also able to get it to get into a boot loop once again
When i run odin with the S7_Qualcomm.tar with auto reboot re-partition f. reset time and nand earse all it fails and gives me these logs
<ID:0/005> Added!!
<ID:0/005> Odin engine v(ID:3.1203)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Erase...
<ID:0/005> Set PIT file..
<ID:0/005> DO NOT TURN OFF TARGET!!
<ID:0/005> Can't open the specified file. (Line: 1831)
<OSM> All threads completed. (succeed 0 / failed 1)
When running the s7_qualcomm.tar file with only auto reboot and r.reset time I get a PASS with these logs
<ID:0/005> Removed!!
<ID:0/005> Added!!
<ID:0/005> Odin engine v(ID:3.1203)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> boot.img
<ID:0/005> RQT_CLOSE !!
<ID:0/005> RES OK !!
<ID:0/005> Removed!!
<ID:0/005> Remain Port .... 0
<OSM> All threads completed. (succeed 1 / failed 0)
But now my phone is in a boot loop with the logo of samsung S7 and the reovery booting.. is also popping up at the same time.
Enisty said:
I have been using the modded one this entire time does that mean anything?
Click to expand...
Click to collapse
Have you tried the non-modded version?
I'd have used that first
ODIN 3.12.3 or newer
*Detection* said:
Have you tried the non-modded version?
I'd have used that first
ODIN 3.12.3 or newer
Click to expand...
Click to collapse
IT WORKS!
I downloaded this file
USC-G930R4TYU4BQK3-20171221083318.zip
Wish I knew where I got it from but now my phone is actually turning on!
There was a loading screen iv never seen before thought it show
Installing applications with a black bar then smart switch popped up and the bar was filled instantly with yellow lol iv just never seen this screen before from
past uses of any Samsung device.
Good stuff, just be cautious with that model S7, it's a snapdragon meaning much more difficult to unbrick if you brick it as the bootloader is locked
*Detection* said:
Good stuff, just be cautious with that model S7, it's a snapdragon meaning much more difficult to unbrick if you brick it as the bootloader is locked
Click to expand...
Click to collapse
Its really buggy the OS itself. Its slower the normal idk if its just because of how fresh it is like the flash maybe just give it time?
Enisty said:
Its really buggy the OS itself. Its slower the normal idk if its just because of how fresh it is like the flash maybe just give it time?
Click to expand...
Click to collapse
Did you factory reset after the flash (or use CSC to force the reset)?
I'd reset it, it should be pretty smooth after maybe 5 mins of first boot