Hi,
I am a newbie and follow steps carefully to flash rom on my droid charge. I am using Odin 1.82 and CI510_VZW_EP1F_ALL_ONE-LTE-CP_REV3_user_CL300919_Rooted_Debloated.tar.md5 file. I am stucking at initialization step. Would you please give me advice? Thanks a lot.
vnt4356 said:
Hi,
I am a newbie and follow steps carefully to flash rom on my droid charge. I am using Odin 1.82 and CI510_VZW_EP1F_ALL_ONE-LTE-CP_REV3_user_CL300919_Rooted_Debloated.tar.md5 file. I am stucking at initialization step. Would you please give me advice? Thanks a lot.
Click to expand...
Click to collapse
Remove the battery before you go into download mode and put it back in once Odin recognizes your phone.
Yeah I got stuck there too...putting the battery back in worked wonders!
Yeah, it worked like a charm. Thanks for your help. Finally, I have my custom rom on my droid charge.
What do you do it f you have a devise that doesn't have a removable battery?
hi guys i have the same problem with sm-n900 note 3 but removing the battery does nothing please help me out
hazard209 said:
Remove the battery before you go into download mode and put it back in once Odin recognizes your phone.
Click to expand...
Click to collapse
my phone wont recognize it. how can I fix it. help me please
Sorry to hear that. Could you try using a different USB cable or PORT? Let the phone be connected in Odin mode and remove the battery. Wait for 2 - 5 minutes and assemble the battery again.
hazard209 said:
Remove the battery before you go into download mode and put it back in once Odin recognizes your phone.
Click to expand...
Click to collapse
i dont know exactly what you mean. I have a t399 that i´m trying to flash but if i withdraw the battery it won´t get recognized by the pc. please can you be a little more especific i´d be really grateful.
guys please help ??? when i try to flash stock rom on my device (samsung GT-S7582) odin stuck at Initialzation and i get this message :
<ID:0/004> Added!!
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Set PIT file..
<ID:0/004> DO NOT TURN OFF TARGET!!
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/004> Removed!!
i tried to set pit file but still get the same error !! what should i do
<ID:0/004> Added!!
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
guys its stuck on this please help
Related
I just got a SGS2 Skyrocket and was using odin. It didn't make any progress for 3 hours so I unplugged (I know not to but I didn't know an alternative either). Anyway, I am now getting the "Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again." Error message. I read in another thread that I should re-enter Odin to try to fix it, but I can no longer get into download mode. What's the next step here? I know this topic has been discussed, but I really want to make sure I do this right.
When you see that "error" screen you should be in download mode. If not do this. Pull battery and reinsert. Hold the up /down volume and plug in USB. Should kick you into download mode.
Sent from my SAMSUNG-SGH-I727 using xda premium
iLiberate said:
I just got a SGS2 Skyrocket and was using odin. It didn't make any progress for 3 hours so I unplugged (I know not to but I didn't know an alternative either). Anyway, I am now getting the "Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again." Error message. I read in another thread that I should re-enter Odin to try to fix it, but I can no longer get into download mode. What's the next step here? I know this topic has been discussed, but I really want to make sure I do this right.
Click to expand...
Click to collapse
I had the same issue.. your in download mode.. try pushing your rom of choice through odin again, but use a different usb port. Your basically still in download mode.
Sent from my SGH-T989 using Tapatalk
capcanuck said:
I had the same issue.. your in download mode.. try pushing your rom of choice through odin again, but use a different usb port. Your basically still in download mode.
Sent from my SGH-T989 using Tapatalk
Click to expand...
Click to collapse
Yup, despite the error message you're seeing you should still be able to flash the stock .tar. The phone won't look like it's doing anything--you'll still see the error message--but if Odin sees it you should be fine.
I had this happen to me too and it worked fine.
Well I am at the step where you insert the TAR file for the PDA slot on odin and I can only get this far:
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> boot.img
<ID:0/003> NAND Write Start!!
<ID:0/003> recovery.img
<ID:0/003> system.img.ext4
I used the i727 TAR instead of the i727R TAR file. That's the only thing I can imagine changing to make this work.
Am I suppose to be choosing a ROM at this point as well? Where do I get a pit file if I need one?
Here is process.
iLiberate said:
Well I am at the step where you insert the TAR file for the PDA slot on odin and I can only get this far:
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> boot.img
<ID:0/003> NAND Write Start!!
<ID:0/003> recovery.img
<ID:0/003> system.img.ext4
I used the i727 TAR instead of the i727R TAR file. That's the only thing I can imagine changing to make this work.
Am I suppose to be choosing a ROM at this point as well? Where do I get a pit file if I need one?
Click to expand...
Click to collapse
Same Problem
Hey im new at this and i'm having the same problem. my issue is i have the error message and did what you guys said and reattempted Odin. it recognizes the phone and says
<ID:0/004>Complete(Write) operation failed.
and above the yellow box in Odin is a red box that says Fail!
i have tried this a few times and this is the only result i get.
i think i might have done something wrong with the tar file, i downloaded the correct one and i used 7-Zip to convert the rar to tar and odin now recognizes the file but idk if i was supposed to do that. Any help is greatly appreciated!
sorry for being an idiot i figured out what i did wrong
Yes you must unzip the. 7z file the tar is inside. Unzip it with 7zip then run odin and select the unzips tar file in the pda section of odin
hello
I have the Samsung Galaxy Note 10.1 in 8013 16 GO there, exactly.
I intallé anderoid jelly bean 4.1.1 OTA and did not finish the tablet and restart nonstop. I started handling but nothing goes as planned, ODIN said fail Action! and my tablet is in download mode. And when I reboot I have a small andriod man with the percentage bar with the screen that pops by gray bars. suddenly I think I scrub the tablet and I do not really know what
thank you in advance for helping me because odin know my tablet (the tablet comes into download mode and not in recovry mode) it may not complete the installation with the following message:
<ID:0/006> Added!!
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> boot.img
<ID:0/006> NAND Write Start!!
<ID:0/006> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
3achour said:
hello
I have the Samsung Galaxy Note 10.1 in 8013 16 GO there, exactly.
I intallé anderoid jelly bean 4.1.1 OTA and did not finish the tablet and restart nonstop. I started handling but nothing goes as planned, ODIN said fail Action! and my tablet is in download mode. And when I reboot I have a small andriod man with the percentage bar with the screen that pops by gray bars. suddenly I think I scrub the tablet and I do not really know what
thank you in advance for helping me because odin know my tablet (the tablet comes into download mode and not in recovry mode) it may not complete the installation with the following message:
<ID:0/006> Added!!
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> boot.img
<ID:0/006> NAND Write Start!!
<ID:0/006> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
Re download factory rom and flash again in odin.. . You can also go in the recovery and clear cache and so on.. This will often stop a boot look . But it looks like you have a bad d/load
I'd agree with that.
I find it best to download the roms from Sammobile as they generally provide an MD5 sum you can check to make sure its not a bad download. Especially when using ODIN 4.03/07... ODIN 4.03 does the check before it flashes and ODIN 4.07 checks when the .tar file is selected.
temp
how temp for odin finish their installation
I think it's hang on: "<ID:0/006> NAND Write Start!! "
erica_renee said:
Re download factory rom and flash again in odin.. . You can also go in the recovery and clear cache and so on.. This will often stop a boot look . But it looks like you have a bad d/load
Click to expand...
Click to collapse
I have not access in the recovery mode
3achour said:
how temp for odin finish their installation
I think it's hang on: "<ID:0/006> NAND Write Start!! "
Click to expand...
Click to collapse
odin did not finish the installation process about 2 hours and even post thank you for helping me
You need to download the rom again to see if it's not a corrupted copy. Use a PC to download it from sammobile.com.
If the flash file you are using is corrupt you can flash it til this century ends and it won't work...
If it still doesn't get past nand write then I believe you may need a pit file to repartition your internal memory. THIS IS A VERY DANGEROUS OPERATION. Make sure you have the correct pit file and if possible get it with an MD5 checksum so you know there is nothing wrong with the downloaded file. It MUST be for your device or bricking may occur, it MUST not be corrupted or bricking will occur.
Good luck and remember, you have been warned...
Please help me i have restarted my tab GT-N800) and the samsung sign kept rotaing.
I Factory restarted it but no good .
Then i put it in download mode and tried to flash it but it is stuck in SetupConnection
Now it is stuck in download mode when i click Power + Volume up button only the android sign comes the odin mode information does not come
Please Help me :crying:
What about this?
:good:
AthulVincent said:
Please help me i have restarted my tab GT-N800) and the samsung sign kept rotaing.
I Factory restarted it but no good .
Then i put it in download mode and tried to flash it but it is stuck in SetupConnection
Now it is stuck in download mode when i click Power + Volume up button only the android sign comes the odin mode information does not come
Please Help me :crying:
Click to expand...
Click to collapse
1. At the downloading screen, plug your phone into your computer
2. Run Odin (I used Odin3 v3.09)
3. Uncheck auto reboot and F. Reset Time
4. Select PIT and load a .pit file ( Search forum for right PIT file)
5. Click Start
It will fail and your Message box will look like this
<ID:0/005> Added!!
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Set PIT file..
<ID:0/005> DO NOT TURN OFF TARGET!!
<ID:0/005> FAIL!
<ID:0/005>
<ID:0/005> Re-Partition operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/005> Removed!!
6. Now uplug your phone from the computer and reboot.
The only explanation I can come up with is that the partition file info gets corrupted or lost and doing this either rewrites the partition info file or tells the system where to look for it. I could be wrong but it is the only thing that works for me.
Wish you luck! Peter :fingers-crossed:
This should be a sticky, thanks my tablet is working again. Thank you Tanker32
Sent from my SM-N900 using Tapatalk
Hello. Sorry for my enlgish.
Theres a soft-bricked SM-P900, I can normally open download mode. (asking for Kies)
Here's the Odin log:
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> sboot.bin
<ID:0/004> NAND Write Start!!
<ID:0/004> boot.img
<ID:0/004> recovery.img
<ID:0/004> system.img
<ID:0/004> FAIL!
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
It's always stucks on "system.img" in ANY .tar I try to flash.
Yesterday, it could power on. But now it's not powering on at all. I hope this is because of battery charge.
===UPD: Yes, it was because of battery charge. Now it's powered on.
What should I do, guys? Help, please!
V01DY said:
Hello. Sorry for my enlgish.
Theres a soft-bricked SM-P900, I can normally open download mode. (asking for Kies)
Here's the Odin log:
It's always stucks on "system.img" in ANY .tar I try to flash.
Yesterday, it could power on. But now it's not powering on at all. I hope this is because of battery charge.
===UPD: Yes, it was because of battery charge. Now it's powered on.
What should I do, guys? Help, please!
Click to expand...
Click to collapse
If it were me I would verify the files, perhaps redownload it. I'd also try a different USB port, cable or reinstall USB drivers on the computer. Sometimes one has to clean out old device drivers manually. I've done this with USBDEVIEW.
Sent from my SM-P900 using Tapatalk
hi, on monday my s6 model G920I fell on the floor, and stop working. so i took it to he shop and they replace the battery, today my phone is dead and now they tell is the board, i needs to be replace..... but i dont trust it because i the board was okay, i should have damage.
now my phones stays freeze on the samsung s6 logo and only get into dowload mode... doesnt let me get to recovery phone.
i have already, flash, install custom rom and stock room. still doesnt respond.....
i need to know if there another way to recover and find out if the imei change, so i can identify if he shop replace the board to a non working one so they could charge me to change it
thanks
ebikok said:
hi, on monday my s6 model G920I fell on the floor, and stop working. so i took it to he shop and they replace the battery, today my phone is dead and now they tell is the board, i needs to be replace..... but i dont trust it because i the board was okay, i should have damage.
now my phones stays freeze on the samsung s6 logo and only get into dowload mode... doesnt let me get to recovery phone.
i have already, flash, install custom rom and stock room. still doesnt respond.....
i need to know if there another way to recover and find out if the imei change, so i can identify if he shop replace the board to a non working one so they could charge me to change it
thanks
Click to expand...
Click to collapse
install 4 file stock rom with pit file maybe this helps and in odin select phone bootloader update maybe bootloader is causing it
enesuzun2002 said:
install 4 file stock rom with pit file maybe this helps and in odin select phone bootloader update maybe bootloader is causing it
Click to expand...
Click to collapse
the problem is that the stock rom comes in one md5 file
ebikok said:
the problem is that the stock rom comes in one md5 file
Click to expand...
Click to collapse
use this method to create 4 file rom http://forum.gsmhosting.com/vbb/f77...4-file-multi-firmware-your-own-100-a-1860706/
and then find a pit file you are done
enesuzun2002 said:
use this method to create 4 file rom http://forum.gsmhosting.com/vbb/f77...4-file-multi-firmware-your-own-100-a-1860706/
and then find a pit file you are done
Click to expand...
Click to collapse
i did it now this is what odin says
<ID:0/003> Odin engine v(ID:3.1203)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> sboot.bin
<ID:0/003> FAIL!
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
and the cell put in red letter sw rev chechk fail device3 binary 1
ebikok said:
i did it now this is what odin says
<ID:0/003> Odin engine v(ID:3.1203)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> sboot.bin
<ID:0/003> FAIL!
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
and the cell put in red letter sw rev chechk fail device3 binary 1
Click to expand...
Click to collapse
you are trying to install a old android version your bootloader have 3. security patch so you have to install a 3th security firmware please try a newer firmware or try smart switch maybe it works
I tried the smart switch emergency repair and after loading successfully it's reboots and stay in the logo screen