Soft-bricked SM-P900 stucks on system.img in Odin - Galaxy Note Pro 12.2 Q&A, Help & Troubleshooting

Hello. Sorry for my enlgish.
Theres a soft-bricked SM-P900, I can normally open download mode. (asking for Kies)
Here's the Odin log:
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> sboot.bin
<ID:0/004> NAND Write Start!!
<ID:0/004> boot.img
<ID:0/004> recovery.img
<ID:0/004> system.img
<ID:0/004> FAIL!
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
It's always stucks on "system.img" in ANY .tar I try to flash.
Yesterday, it could power on. But now it's not powering on at all. I hope this is because of battery charge.
===UPD: Yes, it was because of battery charge. Now it's powered on.
What should I do, guys? Help, please!

V01DY said:
Hello. Sorry for my enlgish.
Theres a soft-bricked SM-P900, I can normally open download mode. (asking for Kies)
Here's the Odin log:
It's always stucks on "system.img" in ANY .tar I try to flash.
Yesterday, it could power on. But now it's not powering on at all. I hope this is because of battery charge.
===UPD: Yes, it was because of battery charge. Now it's powered on.
What should I do, guys? Help, please!
Click to expand...
Click to collapse
If it were me I would verify the files, perhaps redownload it. I'd also try a different USB port, cable or reinstall USB drivers on the computer. Sometimes one has to clean out old device drivers manually. I've done this with USBDEVIEW.
Sent from my SM-P900 using Tapatalk

Related

Odin got stuck at initialization step

Hi,
I am a newbie and follow steps carefully to flash rom on my droid charge. I am using Odin 1.82 and CI510_VZW_EP1F_ALL_ONE-LTE-CP_REV3_user_CL300919_Rooted_Debloated.tar.md5 file. I am stucking at initialization step. Would you please give me advice? Thanks a lot.
vnt4356 said:
Hi,
I am a newbie and follow steps carefully to flash rom on my droid charge. I am using Odin 1.82 and CI510_VZW_EP1F_ALL_ONE-LTE-CP_REV3_user_CL300919_Rooted_Debloated.tar.md5 file. I am stucking at initialization step. Would you please give me advice? Thanks a lot.
Click to expand...
Click to collapse
Remove the battery before you go into download mode and put it back in once Odin recognizes your phone.
Yeah I got stuck there too...putting the battery back in worked wonders!
Yeah, it worked like a charm. Thanks for your help. Finally, I have my custom rom on my droid charge.
What do you do it f you have a devise that doesn't have a removable battery?
hi guys i have the same problem with sm-n900 note 3 but removing the battery does nothing please help me out
hazard209 said:
Remove the battery before you go into download mode and put it back in once Odin recognizes your phone.
Click to expand...
Click to collapse
my phone wont recognize it. how can I fix it. help me please
Sorry to hear that. Could you try using a different USB cable or PORT? Let the phone be connected in Odin mode and remove the battery. Wait for 2 - 5 minutes and assemble the battery again.
hazard209 said:
Remove the battery before you go into download mode and put it back in once Odin recognizes your phone.
Click to expand...
Click to collapse
i dont know exactly what you mean. I have a t399 that i´m trying to flash but if i withdraw the battery it won´t get recognized by the pc. please can you be a little more especific i´d be really grateful.
guys please help ??? when i try to flash stock rom on my device (samsung GT-S7582) odin stuck at Initialzation and i get this message :
<ID:0/004> Added!!
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Set PIT file..
<ID:0/004> DO NOT TURN OFF TARGET!!
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/004> Removed!!
i tried to set pit file but still get the same error !! what should i do
<ID:0/004> Added!!
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
guys its stuck on this please help

[Q] Help soft bricked?

So here's what happened. I tried to install CWM 6.0.1.2 using EZ Recovery and it rebooted into ODIN with the words, could not do normal boot, in red. When I reboot it, it would just go back to the ODIN screen, so I tried to use the root 66 method. At first, it would get to system.img.ext4, but the green bar would barely move and be stuck there for 30 minutes. I would try again by taking out the USB cord, rebooting phone (maybe bad idea?). I did it again and it would be stuck there. I tried different USB ports on my laptop. Some will get to system.img and be stuck or get to recovery.img and say fail. Is my phone hard bricked or is there something else I can do? Thanks!
I also tried it on a different computer and it gets stuck on boot.img instead. Any help would be greatly appreciated!
It seems like using the older version of Odin gave me more consistent results. I now always get to system.img before it fails. The green bar gets 1/3 of the way then says failed.
<ID:0/004> Added!!
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> boot.img
<ID:0/004> NAND Write Start!!
<ID:0/004> recovery.img
<ID:0/004> system.img.ext4
<ID:0/004> Complete(Write) operation failed.
<ID:0/004> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
Is there anyway to get it to be successful?

[Completed] Soft-bricked SM-P900 stucks on system.img in Odin

Hello. Sorry for my enlgish.
Theres a soft-bricked SM-P900, I can normally open download mode. (But on normal system loading it asking for Kies)
(Samsung Galaxy Note Pro 12.2 WiFi SM-P900)
No ROM installed now. I just can't install it.
Here's the Odin log:
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> sboot.bin
<ID:0/004> NAND Write Start!!
<ID:0/004> boot.img
<ID:0/004> recovery.img
<ID:0/004> system.img
<ID:0/004> FAIL!
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
It's always stucks on "system.img" in ANY .tar I try to flash.
Yesterday, it could power on. But now it's not powering on at all. I hope this is because of battery charge.
===UPD: Yes, it was because of battery charge. Now it's powered on
===UPD2: Now it's powered off again and I can't power it on, what the hell?...
What should I do, guys? Help, please!
Thread closed / Duplicate

get information dead S6

hi, on monday my s6 model G920I fell on the floor, and stop working. so i took it to he shop and they replace the battery, today my phone is dead and now they tell is the board, i needs to be replace..... but i dont trust it because i the board was okay, i should have damage.
now my phones stays freeze on the samsung s6 logo and only get into dowload mode... doesnt let me get to recovery phone.
i have already, flash, install custom rom and stock room. still doesnt respond.....
i need to know if there another way to recover and find out if the imei change, so i can identify if he shop replace the board to a non working one so they could charge me to change it
thanks
ebikok said:
hi, on monday my s6 model G920I fell on the floor, and stop working. so i took it to he shop and they replace the battery, today my phone is dead and now they tell is the board, i needs to be replace..... but i dont trust it because i the board was okay, i should have damage.
now my phones stays freeze on the samsung s6 logo and only get into dowload mode... doesnt let me get to recovery phone.
i have already, flash, install custom rom and stock room. still doesnt respond.....
i need to know if there another way to recover and find out if the imei change, so i can identify if he shop replace the board to a non working one so they could charge me to change it
thanks
Click to expand...
Click to collapse
install 4 file stock rom with pit file maybe this helps and in odin select phone bootloader update maybe bootloader is causing it
enesuzun2002 said:
install 4 file stock rom with pit file maybe this helps and in odin select phone bootloader update maybe bootloader is causing it
Click to expand...
Click to collapse
the problem is that the stock rom comes in one md5 file
ebikok said:
the problem is that the stock rom comes in one md5 file
Click to expand...
Click to collapse
use this method to create 4 file rom http://forum.gsmhosting.com/vbb/f77...4-file-multi-firmware-your-own-100-a-1860706/
and then find a pit file you are done
enesuzun2002 said:
use this method to create 4 file rom http://forum.gsmhosting.com/vbb/f77...4-file-multi-firmware-your-own-100-a-1860706/
and then find a pit file you are done
Click to expand...
Click to collapse
i did it now this is what odin says
<ID:0/003> Odin engine v(ID:3.1203)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> sboot.bin
<ID:0/003> FAIL!
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
and the cell put in red letter sw rev chechk fail device3 binary 1
ebikok said:
i did it now this is what odin says
<ID:0/003> Odin engine v(ID:3.1203)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> sboot.bin
<ID:0/003> FAIL!
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
and the cell put in red letter sw rev chechk fail device3 binary 1
Click to expand...
Click to collapse
you are trying to install a old android version your bootloader have 3. security patch so you have to install a 3th security firmware please try a newer firmware or try smart switch maybe it works
I tried the smart switch emergency repair and after loading successfully it's reboots and stay in the logo screen

Galaxy S7 G930W8 won't start, won't take stock ROM nor TWRP

Hello all,
I have a Samsung Galaxy S7, from Rogers but unlocked, version SM-G930W8 that I bought second hand.
Phone was rooted, I factory reset it to prepare it for my wife, then installed apps and moved data and everything.
Turned the phone off and put it aside, the next day I bought a new Nano SIM, turned it ON and I got "Custom binary blocked by FRP lock".
I downloaded G930W8VLU1APG1_G930W8OYA1APG1_XAC tried flashing via ODIN and got this:
<ID:0/004> Odin engine v(ID:3.1203)..
<ID:0/004> File analysis..
<ID:0/004> skip file list for home binary
<ID:0/004> param.bin
<ID:0/004> Home Binary Download
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> sboot.bin
<ID:0/004> cm.bin
<ID:0/004> FAIL!
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
On the phone I had: SW REV. CHECK FAIL. DEVICE: 2. BINARY: 1
Tried: twrp-3.0.2-4-herolte.img.tar with Odin
It goes all the way through but fails at the end with this message:
<ID:0/004> Odin engine v(ID:3.1203)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> recovery.img
<ID:0/004> RQT_CLOSE !!
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
On the phone I had: Custom Binary(Recovery) Blocked by FRP Lock
Also I have tried multiple computers, multiple cables, multiple versions of ODIN, ...
Now the phone is stuck at the Samsung screen and won’t turn on or off, until the battery dies.
Tried Smart Switch but it asks for the serial number, which I do not have. (There is just IMEI on the back of the phone)
Not sure but I think somehow after the factory reset the OEM Unlock got disabled.
Any help is greatly appreciated.
Did you ever figure this out? I'm facing the same thing and hoping my phone isn't bricked.
https://forum.xda-developers.com/galaxy-s7/help/potentially-bricked-s7-flat-custom-t3583502
This will fix and let you flash.
1) Open Odin, place all the necessary files into their slots.
2) Go the the options tab, make sure "Auto Reboot" IS ticked.
3) Press "start", but as soon as you do, hold down Vol down+Home+Power on your phone.
Odin will fail and your phone will reboot into download mode again.
Now press "Start" in Odin again, and your phone should flash without a problem.
This might take a few attempts to get right, but I hope it helps.

Categories

Resources