Database Info

Phone restarting it self then vibrating over and over. (ics builds)

this just started happening on the new sky ics (real thing) build, and now on superlite-mx 5.1.. ill press a button and even somtimes just pulldown notifcation bar and it will restart and vibrate over and over till i press the power button to restart the phone

Girn said:
this just started happening on the new sky ics (real thing) build, and now on superlite-mx 5.1.. ill press a button and even somtimes just pulldown notifcation bar and it will restart and vibrate over and over till i press the power button to restart the phone
Click to expand...
Click to collapse
Sounds like left over data, bad download, bad flash, or a combo of those

Girn said:
this just started happening on the new sky ics (real thing) build, and now on superlite-mx 5.1.. ill press a button and even somtimes just pulldown notifcation bar and it will restart and vibrate over and over till i press the power button to restart the phone
Click to expand...
Click to collapse
I'm going to make a shot in the dark and ask if u have uclcl5 installed as ur radio. If so I causes major flash issues for me on a fresh rom install. So much so I have to flash cla4 first, then a new from, then cl5 again to get it to work

icenight89 said:
I'm going to make a shot in the dark and ask if u have uclcl5 installed as ur radio. If so I causes major flash issues for me on a fresh rom install. So much so I have to flash cla4 first, then a new from, then cl5 again to get it to work
Click to expand...
Click to collapse
No im using cla4.. I followed all steps and did superwipe. Why is it still bad flashing?
Sent from my SAMSUNG-SGH-I727 using xda premium

Girn said:
No im using cla4.. I followed all steps and did superwipe. Why is it still bad flashing?
Sent from my SAMSUNG-SGH-I727 using xda premium
Click to expand...
Click to collapse
sometimes for no reason band corruption occurs. I suggest the following in can
factory reset 3x
format system 3x
wipe dalvik cache 3x
dark side 2x
Odin back stock
reboot twice
Odin can
dark side again
flash custom rom
I had similar problems to you and this looking procedure cured them.

I have the same problem with my fiancée phone which I am on right now. Shuts off and starts repeatedly vibrating on a stock non rooted phone.... I never got around to rooting this phone, unless she did it and didn't tell me.but assuming this isn't rooted what do I do?

mistaashby said:
I have the same problem with my fiancée phone which I am on right now. Shuts off and starts repeatedly vibrating on a stock non rooted phone.... I never got around to rooting this phone, unless she did it and didn't tell me.but assuming this isn't rooted what do I do?
Click to expand...
Click to collapse
Could be a sticky power button
Sent from my A500 using Tapatalk 2

StolenVW said:
Could be a sticky power button
Sent from my A500 using Tapatalk 2
Click to expand...
Click to collapse
That
Sent from my SAMSUNG-SGH-I727 using xda app-developers app

Pull the battery plug in the USB cable and put the battery back in. Charge it. Mine did that when the batt died. Wouldn't even charge etc.. gotta trick it into booting then leave it for a while let it charge. Wipe battery stats if your rooted cwm etc...
Sent from my SAMSUNG-SGH-I727 using xda premium

cwm question...

im using latest cwm from rom manager.. i noticed when i shutdown the phone the phone will reboot into cwm. I can get around this with turning fastboot on under power settings. Is there away around this?
Thanks!!

iB4STiD said:
im using latest cwm from rom manager.. i noticed when i shutdown the phone the phone will reboot into cwm. I can get around this with turning fastboot on under power settings. Is there away around this?
Thanks!!
Click to expand...
Click to collapse
I had the same issue bud then I flashed TWRP and the issues were gone I suggest you try out that recovery.
Sent from my HTC VLE_U using xda premium

It's an ever present "bug" in clockwork source going back to the Dream but I always saw it as a feature.. koush has fixed that several times but it just comes back which is a good thing for me however I converted to twrp and sadly the bug doesn't want to go there.
Sent from my HTC One S using xda premium

Thanks !!, ya isnt that big of a deal. Reason why i wanted a workaround was i thought by turning on fastboot under power n settings would stop the resetting of the uptime on battery stats when chraged to a 100 (cause the phone is in sleep) and i wanted to see how good this battery would be for me under my everyday use, but it turns out it does reset even tho its on so good

Moved To Q&A​
Please Post questions in the Q&A section​

Battery % stuck

I'm using cleanrom 2.5 wiped data, cache, dalvik and my battery drains down to 23% and doesn't change til it dies.
I've tried wiping battery stats in cwm and calibrating through battery calibration from play store.
Help?
Sent from my SCH-I535 using xda app-developers app

i would just say reboot the phone but it doesn't seem like that will work.

Ok it's not the rom cause I just flashed the latest beans and it's doing it again
Last night I let it die then charged it back up. No luck.
Sent from my SCH-I535 using xda app-developers app

battery percentage not accurate on mytouch 4g slide cm9.1

battery percentage not accurate on mytouch 4g slide cm9.1 ....i charged my phone for 6 hours it gives 36%,i unplug it and reboot it and it gives 94%,after another reboot it gives 72% just wondering why it keeps fluctuating and the batt stats as been wipe but still the same please kindly help

Try discharging it completely, then charge up to 100% without any breaks. Then, again empty the battery and charge to max. Then, for the third time, once you're done discharging and charging up to 100%, don't disconnect the charger, manually delete batterystats.bin in data/system, and then disconnect the charger.
...The above solution might work. Might. Yeah.

thanks please is there any other option?

Use Battery Monitor Widget. Put the widget on your home screen, monitor your battery at all times, gather enough data, and then calibrate it.
If that still does not solve the problem then... wipe cache, dalvik, flash a new kernel.
If that's no good either, then switch to another ROM.
If you still cannot see light at the end of the tunnel, then... buy a new battery.
If, even then, life still betrays you... then... thoroughly mix 2.34 grams of sugar and 5.09 grams of powdered gold in 155.71 grams of warm distilled water. Drink the mixture and hopefully, your life will change for the better.
I've got your back. :fingers-crossed:

thanks for getting back at me....my battery works great on the stock rom when i tried switching back but its just malfunction on cm9 and cm10 as well...i.e battery percentage not accurate...well,i will give it a try and please how do i flash a new kernel

Flash WildKernel Reloaded on either CM9 or CM10.
1. Download the zip file and copy it to your phone's SD card.
2. Boot your phone in Recovery. Wipe cache and dalvik cache.
3. Flash/Install the zip file.
4. Reboot your phone.
5. Empty the battery, charge to 100%, wipe batterystats, unplug charger.
That should do the trick. But if it still fails, try flashing a different ROM. AOKP, for instance.

semiworld1 said:
battery percentage not accurate on mytouch 4g slide cm9.1 ....i charged my phone for 6 hours it gives 36%,i unplug it and reboot it and it gives 94%,after another reboot it gives 72% just wondering why it keeps fluctuating and the batt stats as been wipe but still the same please kindly help
Click to expand...
Click to collapse
This is something I've seen this device struggle with foor over a year. HTC failed this device and community.
abe5 said:
Try discharging it completely, then charge up to 100% without any breaks. Then, again empty the battery and charge to max. Then, for the third time, once you're done discharging and charging up to 100%, don't disconnect the charger, manually delete batterystats.bin in data/system, and then disconnect the charger.
...The above solution might work. Might. Yeah.
Click to expand...
Click to collapse
Batterystats.bin is automatically wiped when the battery charge. So doing all that crazy calibration is honestly a waste of time.
Sent from my Nexus 4 using xda-developers app

@strapped pls what do u really suggest cos am on cm10 now and its still the same i mean my battery percentage...i even charged for 7hrs while phone is off but not more than 59% so when i switch it on it continue charging

semiworld1 said:
@strapped pls what do u really suggest cos am on cm10 now and its still the same i mean my battery percentage...i even charged for 7hrs while phone is off but not more than 59% so when i switch it on it continue charging
Click to expand...
Click to collapse
I had to buy extra batteries if I wanted to stay on the bleeding edge of development.
For some reason CM9 was the same way and it took ages to fix. Its just something your going to have to compensate for if you plan on staying with the device.
Sent from my Nexus 4 using xda-developers app

same thing happen to my phone, install a new kernel, charge it full then calibrate the battery work for me

Pls nd Pls hw do I install a new kernel
Sent from my myTouch_4G_Slide using xda app-developers app

semiworld1 said:
Pls nd Pls hw do I install a new kernel
Sent from my myTouch_4G_Slide using xda app-developers app
Click to expand...
Click to collapse
Download kernel of choice...make sure your s-off then wipe cache and dalvik then flash in recovery or...if your s-on download kernel of choice. Flash it in recovery (for modules to be flashed) then boot into boot loader and run put the boot.img in your SDK/fastboot dir and run fastboot flash boot boot.img and reboot.
Sent from my Nexus 4 using Tapatalk 2

Battery Not Recognized?

So randomly my brother's Galaxy S3 stopped recognizing receiving power from the battery. He thought maybe the battery was dead but we've tested with my battery (fully charge) and nothing happens. When plugged in with a full charged battery it shows the battery level indicator screen with an empty battery. Any ideas? Have flashed phone back to full stock just in case that was causing issues.
EDIT: Realized the battery is recognized but phone is not getting any power from it. With battery in I can boot into download mode. Without battery in I cannot boot into download mode.
Also re-unlocked bootloader, flashed an old version of CWM and cleared battery stats. No dice.

Froogloops said:
So randomly my brother's Galaxy S3 stopped recognizing receiving power from the battery. He thought maybe the battery was dead but we've tested with my battery (fully charge) and nothing happens. When plugged in with a full charged battery it shows the battery level indicator screen with an empty battery. Any ideas? Have flashed phone back to full stock just in case that was causing issues.
EDIT: Realized the battery is recognized but phone is not getting any power from it. With battery in I can boot into download mode. Without battery in I cannot boot into download mode.
Also re-unlocked bootloader, flashed an old version of CWM and cleared battery stats. No dice.
Click to expand...
Click to collapse
Did you take the OTA to 4.3 before you downgraded? If so you have a soft brick and can repair it in download mode with ODIN and the stock 4.3 rom file
Sent from my SCH-I535 using xda app-developers app

5ft24 said:
Did you take the OTA to 4.3 before you downgraded? If so you have a soft brick and can repair it in download mode with ODIN and the stock 4.3 rom file
Sent from my SCH-I535 using xda app-developers app
Click to expand...
Click to collapse
It's not bricked. If I give it enough power through the charger port I can boot into android just fine.

Maybe the battery just crapped out? (Maybe need New battery)
Sent from my SCH-I535 using xda app-developers app