battery percentage not accurate on mytouch 4g slide cm9.1 - T-Mobile myTouch 4G Slide

battery percentage not accurate on mytouch 4g slide cm9.1 ....i charged my phone for 6 hours it gives 36%,i unplug it and reboot it and it gives 94%,after another reboot it gives 72% just wondering why it keeps fluctuating and the batt stats as been wipe but still the same please kindly help

Try discharging it completely, then charge up to 100% without any breaks. Then, again empty the battery and charge to max. Then, for the third time, once you're done discharging and charging up to 100%, don't disconnect the charger, manually delete batterystats.bin in data/system, and then disconnect the charger.
...The above solution might work. Might. Yeah.

thanks please is there any other option?

Use Battery Monitor Widget. Put the widget on your home screen, monitor your battery at all times, gather enough data, and then calibrate it.
If that still does not solve the problem then... wipe cache, dalvik, flash a new kernel.
If that's no good either, then switch to another ROM.
If you still cannot see light at the end of the tunnel, then... buy a new battery.
If, even then, life still betrays you... then... thoroughly mix 2.34 grams of sugar and 5.09 grams of powdered gold in 155.71 grams of warm distilled water. Drink the mixture and hopefully, your life will change for the better.
I've got your back. :fingers-crossed:

thanks for getting back at me....my battery works great on the stock rom when i tried switching back but its just malfunction on cm9 and cm10 as well...i.e battery percentage not accurate...well,i will give it a try and please how do i flash a new kernel

Flash WildKernel Reloaded on either CM9 or CM10.
1. Download the zip file and copy it to your phone's SD card.
2. Boot your phone in Recovery. Wipe cache and dalvik cache.
3. Flash/Install the zip file.
4. Reboot your phone.
5. Empty the battery, charge to 100%, wipe batterystats, unplug charger.
That should do the trick. But if it still fails, try flashing a different ROM. AOKP, for instance.

semiworld1 said:
battery percentage not accurate on mytouch 4g slide cm9.1 ....i charged my phone for 6 hours it gives 36%,i unplug it and reboot it and it gives 94%,after another reboot it gives 72% just wondering why it keeps fluctuating and the batt stats as been wipe but still the same please kindly help
Click to expand...
Click to collapse
This is something I've seen this device struggle with foor over a year. HTC failed this device and community.
abe5 said:
Try discharging it completely, then charge up to 100% without any breaks. Then, again empty the battery and charge to max. Then, for the third time, once you're done discharging and charging up to 100%, don't disconnect the charger, manually delete batterystats.bin in data/system, and then disconnect the charger.
...The above solution might work. Might. Yeah.
Click to expand...
Click to collapse
Batterystats.bin is automatically wiped when the battery charge. So doing all that crazy calibration is honestly a waste of time.
Sent from my Nexus 4 using xda-developers app

@strapped pls what do u really suggest cos am on cm10 now and its still the same i mean my battery percentage...i even charged for 7hrs while phone is off but not more than 59% so when i switch it on it continue charging

semiworld1 said:
@strapped pls what do u really suggest cos am on cm10 now and its still the same i mean my battery percentage...i even charged for 7hrs while phone is off but not more than 59% so when i switch it on it continue charging
Click to expand...
Click to collapse
I had to buy extra batteries if I wanted to stay on the bleeding edge of development.
For some reason CM9 was the same way and it took ages to fix. Its just something your going to have to compensate for if you plan on staying with the device.
Sent from my Nexus 4 using xda-developers app

same thing happen to my phone, install a new kernel, charge it full then calibrate the battery work for me

Pls nd Pls hw do I install a new kernel
Sent from my myTouch_4G_Slide using xda app-developers app

semiworld1 said:
Pls nd Pls hw do I install a new kernel
Sent from my myTouch_4G_Slide using xda app-developers app
Click to expand...
Click to collapse
Download kernel of choice...make sure your s-off then wipe cache and dalvik then flash in recovery or...if your s-on download kernel of choice. Flash it in recovery (for modules to be flashed) then boot into boot loader and run put the boot.img in your SDK/fastboot dir and run fastboot flash boot boot.img and reboot.
Sent from my Nexus 4 using Tapatalk 2

Related

[Fix] Battery 0% fix [fix]

maby this works :
1.go to CWM (without charger)
let drain your battery
when your mobile is out of battery try to get him back on Cwm
3. And wait again when it gets off.
4.
when he is complete out of battery plug in the wall.
5.
then try to get your phone on in CWM
restore rom stock .................
5. maby your phone shutdown don't worry...
6. wait and get your phone on
do another rom restore
with all fixes and wipes
when you done start up phone and your ready to charge wait to 100% then its fix
by my is it working
Stock gb rom
Root
Cwm
Sorry for my english
Damage on your phone is not my thing
Not responsible of any damage
hope it works
Sent from my LG-P920 using XDA App
does it work for you ? what rom did you restore ?
my english is poor too.... and i don't understand anything...
can someone test it and explain??
It works for me wait a second i made a new version
Sent from my LG-P920 using XDA App
Okeej the edit is online hope its work for you too guys ..
Sent from my LG-P920 using XDA App
what do you mean ''
6. wait and get your phone on
do another rom restore
with all fixes and wipes
''
what fixes did you did after stock restore ??
First restore than your wipe everything .. than restore again
Sent from my LG-P920 using XDA App
didnt work. thanks anyways
Okeej your welcome iam sorry
Sent from my LG-P920 using XDA App
have same situation here & i ve serche and spent too many houers to find solution but nothing
plz som1 post right stepls to fix this problem
llcoolr said:
have same situation here & i ve serche and spent too many houers to find solution but nothing
plz som1 post right stepls to fix this problem
Click to expand...
Click to collapse
I found something frome paultje162
First download Thaiz O3D Stock 2.7.1
And make sure you are rooted and have CWM
let it on the charger for about 2 hours.
go into CWM
Wipe data
Wipe cache
Advanced settings:
wipe battery stats
wipe dalvik
go back
Mounts and Storage:
format system
go back
Install zip from sdcard
Choose zip
Flash thaiz O3d 2.7.1
reboot
wipe battery stats again
flash thaiz O3d 2.7.1
and reboot
now let it sit on the charger for about 24 hours. after that. you will see you magically have 30% battery.
unplug it. plug it. and it charges fast again
........
Thats a post of him hope it works
Sent from my LG-P920 using XDA
It worked for me. so it should do the trick.
and if it doesnt.
you can put your phone into download mode to restore it to stock.
just unplug battery. hold power and vol up
put in usb cord
put in battery
and let LG mobile update restore it.
remember, you need to take your own KDZ and flash it manually.
like you always restore your phone.
if i'm not wrong it shouldnt ask for charging your battery first.
So, I thought I'd add my experience to this.
I'd been having the same problem with the 0% battery thing since I bought the phone off Ebay.
I tried wiping and flashing rom etc, and it didn't work.
I recently got the battery expansion cover and the larger battery.
One night, I'd had a couple beers and dropped the phone on the floor. The back case flew off and the battery flew out as well. I replaced the battery and replaced the case and turned the phone on.
What do you know, the battery problem was fixed and hasn't returned.
Strange.
everbret said:
So, I thought I'd add my experience to this.
I'd been having the same problem with the 0% battery thing since I bought the phone off Ebay.
I tried wiping and flashing rom etc, and it didn't work.
I recently got the battery expansion cover and the larger battery.
One night, I'd had a couple beers and dropped the phone on the floor. The back case flew off and the battery flew out as well. I replaced the battery and replaced the case and turned the phone on.
What do you know, the battery problem was fixed and hasn't returned.
Strange.
Click to expand...
Click to collapse
HEH HEH !!!
Now we have a solution!!
try at your own risk!!
schubeir

[Q] Battery 0% and not charging problem..

I found few threads about battery 0% and not charging anymore.
and tried what they says.... but it's not working...
does anybody fixed this problem??
actually i have a 'not sale version' of P925, and I was using it with
V10b EUR stock rom well, everything was OK.
and last week,
I installed CWM and restored with KING ROM v2.2 with all wipes.
it did go well, but since i rebooted my O3d,
battery indicator shows 0% and not charging anymore.
It goes off right after i unplug the power.
Only i can use it when usb or power is connected.
I have tried 5 different types of ROM with CWM and tried flashing too,
and battery problem still remains.
Help me plz..
Now, I want to try flashing original version which worked well.
can somebody share V10b EUR Ver. of BIN or KDZ file to me plz?
I've searched with google for a week and couldn't find it,
every download link were corrupted.
BIN_LGP920AT-00-V10b-EUR-XXX-JUN-16-2011+0.zip
Thanks..
i have the same problem, can someone help us pleaaaaaaaaase? !!!!
me too ive got the same issue,u can use sytem apps remover with a rooted firmware and u remove power off.apk,u'll be able to use the phone even the battery indicator is 0,but u wont be able to use,the native camera and video application,install 3rd party apps for them,but u won't be able to film in 3d,or watch 3d films
Iscaronx said:
me too ive got the same issue,u can use sytem apps remover with a rooted firmware and u remove power off.apk,u'll be able to use the phone even the battery indicator is 0,but u wont be able to use,the native camera and video application,install 3rd party apps for them,but u won't be able to film in 3d,or watch 3d films
Click to expand...
Click to collapse
i rooted and removed power off.apk using root explorer and still goes off.... is there anything i need to do more??
This is probably due to a problem with the battery, since android reads the battery %age off the battery (Not from batterystats.bin.)
Try getting a cheap battery off ebay and see if it helps.
yejooni said:
i rooted and removed power off.apk using root explorer and still goes off.... is there anything i need to do more??
Click to expand...
Click to collapse
no but you should not power off or restart ur mob if not if will continue to reset by itself,if you want to restart ur phone plug ur usb cable or poer supply and wait till the homescreen loads before removing the cable,then ur phone will remain on,it would be great if someone could provide us with a modded camera and video player so that we can film and play 3d films
have same situation here & i ve serche and spent too many houers to find solution but nothing
plz som1 post right stepls to fix this problem
Well, i got a fix. i got this problem about a month ago. and got it fixed with this solution:
First download Thaiz O3D Stock 2.7.1
And make sure you are rooted and have CWM
let it on the charger for about 2 hours.
go into CWM
Wipe data
Wipe cache
Advanced settings:
wipe battery stats
wipe dalvik
go back
Mounts and Storage:
format system
go back
Install zip from sdcard
Choose zip
Flash thaiz O3d 2.7.1
reboot
wipe battery stats again
flash thaiz O3d 2.7.1
and reboot
now let it sit on the charger for about 24 hours. after that. you will see you magically have 30% battery.
unplug it. plug it. and it charges fast again
Enjoy
This fixed it for me. hope it does for you.
paultje162 said:
Well, i got a fix. i got this problem about a month ago. and got it fixed with this solution:
First download Thaiz O3D Stock 2.7.1
And make sure you are rooted and have CWM
let it on the charger for about 2 hours.
go into CWM
Wipe data
Wipe cache
Advanced settings:
wipe battery stats
wipe dalvik
go back
Mounts and Storage:
format system
go back
Install zip from sdcard
Choose zip
Flash thaiz O3d 2.7.1
reboot
wipe battery stats again
flash thaiz O3d 2.7.1
and reboot
now let it sit on the charger for about 24 hours. after that. you will see you magically have 30% battery.
unplug it. plug it. and it charges fast again
Enjoy
This fixed it for me. hope it does for you.
Click to expand...
Click to collapse
Hi everybody!
I have a same problem! my phone not charging! Battery 0%. I try your fix, but won't working. I try 3 different rom, wipe everything, again and again, but my problem not solved.
I very unhappy, because i don't have a warrantee to my phone. Should i go to lg service?
Does someone's idea?

No Boot, No Led light

I had installed Vipers and after a few hours not using it i cant open now my phone. This happened twice. First I got it to boot to fastboot and dont know what I did and now its still not booting up
chev said:
I had installed Vipers and after a few hours not using it i cant open now my phone. This happened twice. First I got it to boot to fastboot and dont know what I did and now its still not booting up
Click to expand...
Click to collapse
Remove battery, reinsert it then try again and see if that works. My guess is that your max screen off frequency is too low so your phone couldnt wake up from deep sleep
I did that a million times. and still not working
Are you under volted at all? If so could be under volted too much.
Have you tried a fresh download and install with a full wipe? Assuming you can access recovery, it might be worth a try. Also out of curiosity have you tried a different battery? Once I had no life, no boot, no led and I switched out my battery and bam it booted back up. That's also worth a try. Best of luck and I hope you get it sorted out soon. Best wishes .
Sent from my HTC Sensation 4G using xda premium
realsis said:
Are you under volted at all? If so could be under volted too much.
Have you tried a fresh download and install with a full wipe? Assuming you can access recovery, it might be worth a try. Also out of curiosity have you tried a different battery? Once I had no life, no boot, no led and I switched out my battery and bam it booted back up. That's also worth a try. Best of luck and I hope you get it sorted out soon. Best wishes .
Sent from my HTC Sensation 4G using xda premium
Click to expand...
Click to collapse
Dont have any spare battery to use If only this could go to fastboot it would be easy
chev said:
Dont have any spare battery to use If only this could go to fastboot it would be easy
Click to expand...
Click to collapse
Maybe you left the battery die. It doesnt even show the charging light You should try charging it for an hour remove the battery and charge again, than try to boot. Sesation are known for not booting if the battery dies
Thanks all for the advices, I had my phone sent to the service center for repair or hopefully will get replaced since it was only a week old.

Battery Callibration - For Micromax A110/MyPhone 919 / Q10 Noir

Hi All,
There is No-one Noob, all are the same. Some are Developer & Porters and Others are Members...
For Those Who are Just "Flashoholic" and are Flashing ROMs and Mods, Battery Calibration is Must...
We have Seen Wipe Battery Stats in CWM Recovery Advanced Options but never tried it. Now its time to use it.
Lets Start With the Calibration, but Please Please make Sure to Charge your Battery to 100% or else it will Show wrong Parameters.
Follow the Steps mentioned below....:-
Make sure battery is at 100% and then Leave it on charge for 15 minutes.
Without Disconnecting the Charger just boot in to Recovery(Dont dis-connect the charger)
Then go to advanced in then wipe battery status.
Then reboot to system.
It will show you somewhere 97%.
Let it get full charged again...
You are Done Now....
:good::good::good:
Hit Thanks instead of Saying it....
Disclaimer:- It Doesn't harm the Phone or other thing in anyway but if you have done anything wrong Then The Forum / Members / Me or Others are neither Responsible nor you can blame for It.
So do this with your own Responsibility.
BOND1987 said:
Hi All,
There is No-one Noob, all are the same. Some are Developer & Porters and Others are Members...
For Those Who are Just "Flashoholic" and are Flashing ROMs and Mods, Battery Calibration is Must...
We have Seen Wipe Battery Stats in CWM Recovery Advanced Options but never tried it. Now its time to use it.
Lets Start With the Calibration, but Please Please make Sure to Charge your Battery to 100% or else it will Show wrong Parameters.
Follow the Steps mentioned below....:-
Make sure battery is at 100% and then Leave it on charge for 15 minutes.
Without Disconnecting the Charger just boot in to Recovery(Dont dis-connect the charger)
Then go to advanced in then wipe battery status.
Then reboot to system.
It will show you somewhere 97%.
Let it get full charged again...
You are Done Now....
:good::good::good:
Hit Thanks instead of Saying it....
Disclaimer:- It Doesn't harm the Phone or other thing in anyway but if you have done anything wrong Then The Forum / Members / Me or Others are neither Responsible nor you can blame for It.
So do this with your own Responsibility.
Click to expand...
Click to collapse
Hello bro, what to do if the phone battery is stuck at 99%. I tried the above method but battery the problem persist.
Please help me to reach my battery 100%
Nutankumar said:
Hello bro, what to do if the phone battery is stuck at 99%. I tried the above method but battery the problem persist.
Please help me to reach my battery 100%
Click to expand...
Click to collapse
Bro,
S.off your phone take the battery out and then re insert the battery and s.on it. It will show you a 99% battery or less than that let it get charged then try this.
I was suggested this by another user here. It also does same. CWM or this APP, both deletes "batterystats.bin" file and after immediate reboot the counter starts fresh with actual value. https://play.google.com/store/apps/details?id=com.nema.batterycalibration&hl=en Give it a try. No need to go in recovery mode with this app.
thank you...
Will definitely try this one... Thank you...
Bro what else if we dont have wipe battery stats option in advance?
Our latest cwm recovery doesnt have this option.. the old one has.. but developer says its useless as it wont work.. so he remove it in latest version.. m talking about mmx A110 device.
Sent from my MICROMAX A110 using xda premium
Wipe battery is useless
on every restart phone automatically wipe it
so this option remove from recovery..
just charge your mob 100%
restart without remove charger
check charging is 100% if not then charge it until 100% (some time take 3-4 hrs.)
100% done... remove charger.. use it until 0% don't charging until 0%
try to restart 1-2 time (for empty battery)
then again charge until 100% without remove charger
you do this any time when you feel your battery is need to calibrate..

Phone dies when before battery shows 0 (dies at around 20) using AK Kernel

Hello guys,
After I flashed AK Kernel using a profile posted by magnamentis my battery has been outstanding but the phone dies when battery reaches 20 % mark. sometimes 30, sometimes 25. Any ideas as to why this might be happening? Any way of calibrating the battery to state the correct level?
Many thanks
Use the app BatteryCalibration.
I just tried it. Will report back when the phone discharges. Thanks
I've got 50 minutes of screen on time and my battery is still at 100%. I think something is still clearly wrong...
Have you used BatteryCalibration?
Remember, let it charge to 100% first as instructed in the app itself.
If that doesn't work, I suggest wiping all cache in recovery or ultimately a factory reset.
Gamm86 said:
Have you used BatteryCalibration?
Remember, let it charge to 100% first as instructed in the app itself.
If that doesn't work, I suggest wiping all cache in recovery or ultimately a factory reset.
Click to expand...
Click to collapse
Yes, I followed the instruction in the app. I will try wiping the cache see if that helps.

Categories

Resources