Database Info

[Fix] Battery 0% fix [fix]

maby this works :
1.go to CWM (without charger)
let drain your battery
when your mobile is out of battery try to get him back on Cwm
3. And wait again when it gets off.
4.
when he is complete out of battery plug in the wall.
5.
then try to get your phone on in CWM
restore rom stock .................
5. maby your phone shutdown don't worry...
6. wait and get your phone on
do another rom restore
with all fixes and wipes
when you done start up phone and your ready to charge wait to 100% then its fix
by my is it working
Stock gb rom
Root
Cwm
Sorry for my english
Damage on your phone is not my thing
Not responsible of any damage
hope it works
Sent from my LG-P920 using XDA App

does it work for you ? what rom did you restore ?

my english is poor too.... and i don't understand anything...
can someone test it and explain??

It works for me wait a second i made a new version
Sent from my LG-P920 using XDA App

Okeej the edit is online hope its work for you too guys ..
Sent from my LG-P920 using XDA App

what do you mean ''
6. wait and get your phone on
do another rom restore
with all fixes and wipes
''
what fixes did you did after stock restore ??

First restore than your wipe everything .. than restore again
Sent from my LG-P920 using XDA App

didnt work. thanks anyways

Okeej your welcome iam sorry
Sent from my LG-P920 using XDA App

have same situation here & i ve serche and spent too many houers to find solution but nothing
plz som1 post right stepls to fix this problem

llcoolr said:
have same situation here & i ve serche and spent too many houers to find solution but nothing
plz som1 post right stepls to fix this problem
Click to expand...
Click to collapse
I found something frome paultje162
First download Thaiz O3D Stock 2.7.1
And make sure you are rooted and have CWM
let it on the charger for about 2 hours.
go into CWM
Wipe data
Wipe cache
Advanced settings:
wipe battery stats
wipe dalvik
go back
Mounts and Storage:
format system
go back
Install zip from sdcard
Choose zip
Flash thaiz O3d 2.7.1
reboot
wipe battery stats again
flash thaiz O3d 2.7.1
and reboot
now let it sit on the charger for about 24 hours. after that. you will see you magically have 30% battery.
unplug it. plug it. and it charges fast again
........
Thats a post of him hope it works
Sent from my LG-P920 using XDA

It worked for me. so it should do the trick.
and if it doesnt.
you can put your phone into download mode to restore it to stock.
just unplug battery. hold power and vol up
put in usb cord
put in battery
and let LG mobile update restore it.
remember, you need to take your own KDZ and flash it manually.
like you always restore your phone.
if i'm not wrong it shouldnt ask for charging your battery first.

So, I thought I'd add my experience to this.
I'd been having the same problem with the 0% battery thing since I bought the phone off Ebay.
I tried wiping and flashing rom etc, and it didn't work.
I recently got the battery expansion cover and the larger battery.
One night, I'd had a couple beers and dropped the phone on the floor. The back case flew off and the battery flew out as well. I replaced the battery and replaced the case and turned the phone on.
What do you know, the battery problem was fixed and hasn't returned.
Strange.

everbret said:
So, I thought I'd add my experience to this.
I'd been having the same problem with the 0% battery thing since I bought the phone off Ebay.
I tried wiping and flashing rom etc, and it didn't work.
I recently got the battery expansion cover and the larger battery.
One night, I'd had a couple beers and dropped the phone on the floor. The back case flew off and the battery flew out as well. I replaced the battery and replaced the case and turned the phone on.
What do you know, the battery problem was fixed and hasn't returned.
Strange.
Click to expand...
Click to collapse
HEH HEH !!!
Now we have a solution!!
try at your own risk!!
schubeir

[Q] Problem with battery charging after flash device with kzd file (GB%Froyo)

Hi,
I flash my 3d device to GB with kzd file(situation look same with v10k kzd file). And I have problem with battery charging. I have always 0% battery level even after 10h. I did wipe battery stats in recovery and this state still occur.
Has anyone had a similar problem?

I had it 2.
Install clockwork recovery and boot in it.
Wipe battery state
Turn out your phone
Take out the battery
10 minutes or what.
Turn on your phone hold
Power volume down and 3d
Wipe it again (battery)
Fix premission
Boot and my problem was solved
Hope it works for you too
Grtz
Sorry for my english
Sent from my LG-P920 using XDA App

Thanks for reply,
I checked it with accura samba beta but i doesn't work. I'll check it with official v10k software(kzd). I have one question: Did you plug fully charged battery during this steps?
Update: I can't charge my device after update with kzd file. Also I can't charge after update by recovery(I checked many ROM's Accura,cm7 and more) I did this steps from 'gamesz2' reply and issue still occur. I think problem occur when kernel is changing. When I updated device to v10k and I removed new kernel from zip file. I can charge my device but Camea,Camcorder and videos in browser didn't work
Can somebody help me?

..
did you fix it

No I didn't repair this issue on my device.
Yesterday I updated my device to v21d but I forgot one thing it's not rootable for now and I have to stay with v21d (with battery issue)
Update:
Solved in http://forum.xda-developers.com/showthread.php?t=1547960. Device is working in 99% without 3d

please help.This problem makes me mad

weeks a go I tried to flash a custom rom.after 2 days I decided to back to original RUU rom.
Now the battery indicatior shows wrong .I tried to completly discharge and full charge for severak times but still wrong indicator.
I also tried battery calibration softwares .not worked.
My phone is completly stock now.S-on with original recovery so I can’t remove battery portion with recovery.
Any other solution?

any help ?

bluelove2 said:
any help ?
Click to expand...
Click to collapse
proper battery calibration i would suggest
get these apps first
current widget(its a widget..so yu need to add widget onto your screen)
battery calibration
charge the phone completely..not until the battery shows 100% but until the current widget shows 0/1 mah (it might take hours too..for this to happen even after 100%)
then stop charging and immediately wipe the stats using battery calibration app
then let it discharge completely(i.e. until phone switches off because of low battery)
then charge it completely again and then check the stats

bluelove2 said:
weeks a go I tried to flash a custom rom.after 2 days I decided to back to original RUU rom.
Now the battery indicatior shows wrong .I tried to completly discharge and full charge for severak times but still wrong indicator.
I also tried battery calibration softwares .not worked.
My phone is completly stock now.S-on with original recovery so I can’t remove battery portion with recovery.
Any other solution?
Click to expand...
Click to collapse
If all fail, try to do "temp root" (instead of perm root), temp root does not modify any system partition nor recovery, you can try the link (or Google it): http://forum.xda-developers.com/showthread.php?t=1161283 (I never tried it), after temp root is done, should be able to remove the battery stat file (I believe it is /data/system/batterystats.bin) and reboot.

[Q] Bricked Phone, and T-Mobile Replacement policy

I was running CM 10 and tried to flash the stock ROM. I flashed it fine (no errors in CWM, I also did clear the cache, dalvik, wiped system) after that I pressed reboot and nothing happened no Samsung just a black screen. I waited for around 10 minutes and then finally took out the battery. After that the phone wouldn't boot, recovery or download wouldn't work either. I tried everything I could and figured it's hard bricked. So if you have any suggestions on this they will be greatly appreciated. I still have my T-Mobile warranty, and the question I have is would they accept a phone that is rooted, but won't even boot so basically there is no way of finding out if it's rooted or not?

aanonymoushuman said:
I was running CM 10 and tried to flash the stock ROM. I flashed it fine (no errors in CWM, I also did clear the cache, dalvik, wiped system) after that I pressed reboot and nothing happened no Samsung just a black screen. I waited for around 10 minutes and then finally took out the battery. After that the phone wouldn't boot, recovery or download wouldn't work either. I tried everything I could and figured it's hard bricked. So if you have any suggestions on this they will be greatly appreciated. I still have my T-Mobile warranty, and the question I have is would they accept a phone that is rooted, but won't even boot so basically there is no way of finding out if it's rooted or not?
Click to expand...
Click to collapse
First error was you wiped system before reboot so there was nothing there to boot into... Leave the battery out for a bit then insert and boot into recovery.. reflash rom and this time only wipe cache and dalvik not system.. reboot.. Also how charged was the battery? maybe it is almost dead and needs charging!

Racing19969 said:
First error was you wiped system before reboot so there was nothing there to boot into... Leave the battery out for a bit then insert and boot into recovery.. reflash rom and this time only wipe cache and dalvik not system.. reboot.. Also how charged was the battery? maybe it is almost dead and needs charging!
Click to expand...
Click to collapse
I cant boot into anything at all... And the baterry was fine it was maybe at 60% when I flashed

aanonymoushuman said:
I cant boot into anything at all... And the baterry was fine it was maybe at 60% when I flashed
Click to expand...
Click to collapse
what rom were you flashing when this happened?? if it was a stock rom you should have been using odin.. unless it was one of the stock CWM flashable roms... if you can't get it going send me a pm.. I do JTAG repair

aanonymoushuman said:
I was running CM 10 and tried to flash the stock ROM. I flashed it fine (no errors in CWM, I also did clear the cache, dalvik, wiped system) after that I pressed reboot and nothing happened no Samsung just a black screen. I waited for around 10 minutes and then finally took out the battery. After that the phone wouldn't boot, recovery or download wouldn't work either. I tried everything I could and figured it's hard bricked. So if you have any suggestions on this they will be greatly appreciated. I still have my T-Mobile warranty, and the question I have is would they accept a phone that is rooted, but won't even boot so basically there is no way of finding out if it's rooted or not?
Click to expand...
Click to collapse
Wait... you wiped system after flashing stock...? That wiped the stock rom That's why nothing booted after the reboot.
I don't know why you can't get into download mode... When you plug in a usb when the battery is out does the phone vibrate? If not, try another usb cable. If that fails then you do have a hardware issue. If the phone vibrates hold vol + and vol - and power and reinsert battery-you should get download mode.
AFAIK, they (T-Mo) put the phone in download mode and check the flash counter. If it says anything other than "no" they will not accept it. Any odin flash adds to the flash counter.

anactoraaron said:
Wait... you wiped system after flashing stock...? That wiped the stock rom That's why nothing booted after the reboot.
I don't know why you can't get into download mode... When you plug in a usb when the battery is out does the phone vibrate? If not, try another usb cable. If that fails then you do have a hardware issue. If the phone vibrates hold vol + and vol - and power and reinsert battery-you should get download mode.
AFAIK, they (T-Mo) put the phone in download mode and check the flash counter. If it says anything other than "no" they will not accept it. Any odin flash adds to the flash counter.
Click to expand...
Click to collapse
As said before it's a brick, no screen, no vibration nothing. And I don't think T-Mo can even get to the phone unless they jtag it or something, which they will most likely not do as it will cause discomfort and timeloss to the customers (ME)

aanonymoushuman said:
As said before it's a brick, no screen, no vibration nothing. And I don't think T-Mo can even get to the phone unless they jtag it or something, which they will most likely not do as it will cause discomfort and timeloss to the customers (ME)
Click to expand...
Click to collapse
Well I doubt they can do that at the store (I don't have any confidence in the salespeople's tech ability there lol), so if you are under warranty just tell them that when you unplugged it this morning it was like that :laugh:
If it doesn't vibrate when plugged in and no battery installed then it sounds like a hard brick.
I think they do the manufacturer warranty as an exchange on the spot, so even if they do figure it out eventually you should be good.
But it would suck if they can get it into download mode at the store... better try numerous usb ports (even switch computers to be sure!) and cables to be sure Also wouldn't hurt to leave the battery out overnight and try again. If they get it in download mode... well two things. One they won't ever honor any warranty on the phone anymore (and they will give the phone back to you), but two... if they can get it in download mode have them leave it like that and rush back home - and then you're back in business
Kind of a win-win...

anactoraaron said:
Well I doubt they can do that at the store (I don't have any confidence in the salespeople's tech ability there lol), so if you are under warranty just tell them that when you unplugged it this morning it was like that :laugh:
If it doesn't vibrate when plugged in and no battery installed then it sounds like a hard brick.
I think they do the manufacturer warranty as an exchange on the spot, so even if they do figure it out eventually you should be good.
But it would suck if they can get it into download mode at the store... better try numerous usb ports (even switch computers to be sure!) and cables to be sure Also wouldn't hurt to leave the battery out overnight and try again. If they get it in download mode... well two things. One they won't ever honor any warranty on the phone anymore (and they will give the phone back to you), but two... if they can get it in download mode have them leave it like that and rush back home - and then you're back in business
Kind of a win-win...
Click to expand...
Click to collapse
I got a replacement going from T-Mobile, they just sent out the new phone today, but I'm confused do I send them my broken one right now? or wait till the new one comes?

They should have explained everything on the phone, they will send you a box to return it in . And if they find out that it has been rooted and modded , you could be charged the full price for the phone. Every time I sent the phone back I've always read it back to stock if yours was bricked hopefully they won't notice
Sent from my SAMSUNG-SGH-T769 using xda app-developers app

battery percentage not accurate on mytouch 4g slide cm9.1

battery percentage not accurate on mytouch 4g slide cm9.1 ....i charged my phone for 6 hours it gives 36%,i unplug it and reboot it and it gives 94%,after another reboot it gives 72% just wondering why it keeps fluctuating and the batt stats as been wipe but still the same please kindly help

Try discharging it completely, then charge up to 100% without any breaks. Then, again empty the battery and charge to max. Then, for the third time, once you're done discharging and charging up to 100%, don't disconnect the charger, manually delete batterystats.bin in data/system, and then disconnect the charger.
...The above solution might work. Might. Yeah.

thanks please is there any other option?

Use Battery Monitor Widget. Put the widget on your home screen, monitor your battery at all times, gather enough data, and then calibrate it.
If that still does not solve the problem then... wipe cache, dalvik, flash a new kernel.
If that's no good either, then switch to another ROM.
If you still cannot see light at the end of the tunnel, then... buy a new battery.
If, even then, life still betrays you... then... thoroughly mix 2.34 grams of sugar and 5.09 grams of powdered gold in 155.71 grams of warm distilled water. Drink the mixture and hopefully, your life will change for the better.
I've got your back. :fingers-crossed:

thanks for getting back at me....my battery works great on the stock rom when i tried switching back but its just malfunction on cm9 and cm10 as well...i.e battery percentage not accurate...well,i will give it a try and please how do i flash a new kernel

Flash WildKernel Reloaded on either CM9 or CM10.
1. Download the zip file and copy it to your phone's SD card.
2. Boot your phone in Recovery. Wipe cache and dalvik cache.
3. Flash/Install the zip file.
4. Reboot your phone.
5. Empty the battery, charge to 100%, wipe batterystats, unplug charger.
That should do the trick. But if it still fails, try flashing a different ROM. AOKP, for instance.

semiworld1 said:
battery percentage not accurate on mytouch 4g slide cm9.1 ....i charged my phone for 6 hours it gives 36%,i unplug it and reboot it and it gives 94%,after another reboot it gives 72% just wondering why it keeps fluctuating and the batt stats as been wipe but still the same please kindly help
Click to expand...
Click to collapse
This is something I've seen this device struggle with foor over a year. HTC failed this device and community.
abe5 said:
Try discharging it completely, then charge up to 100% without any breaks. Then, again empty the battery and charge to max. Then, for the third time, once you're done discharging and charging up to 100%, don't disconnect the charger, manually delete batterystats.bin in data/system, and then disconnect the charger.
...The above solution might work. Might. Yeah.
Click to expand...
Click to collapse
Batterystats.bin is automatically wiped when the battery charge. So doing all that crazy calibration is honestly a waste of time.
Sent from my Nexus 4 using xda-developers app

@strapped pls what do u really suggest cos am on cm10 now and its still the same i mean my battery percentage...i even charged for 7hrs while phone is off but not more than 59% so when i switch it on it continue charging

semiworld1 said:
@strapped pls what do u really suggest cos am on cm10 now and its still the same i mean my battery percentage...i even charged for 7hrs while phone is off but not more than 59% so when i switch it on it continue charging
Click to expand...
Click to collapse
I had to buy extra batteries if I wanted to stay on the bleeding edge of development.
For some reason CM9 was the same way and it took ages to fix. Its just something your going to have to compensate for if you plan on staying with the device.
Sent from my Nexus 4 using xda-developers app

same thing happen to my phone, install a new kernel, charge it full then calibrate the battery work for me

Pls nd Pls hw do I install a new kernel
Sent from my myTouch_4G_Slide using xda app-developers app

semiworld1 said:
Pls nd Pls hw do I install a new kernel
Sent from my myTouch_4G_Slide using xda app-developers app
Click to expand...
Click to collapse
Download kernel of choice...make sure your s-off then wipe cache and dalvik then flash in recovery or...if your s-on download kernel of choice. Flash it in recovery (for modules to be flashed) then boot into boot loader and run put the boot.img in your SDK/fastboot dir and run fastboot flash boot boot.img and reboot.
Sent from my Nexus 4 using Tapatalk 2