UPDATE: After a few additional tweaks to the framework, this rom appears to be working for both green and red lens defy users. I've personally used it as my daily driver for several days this week, and found it to be stable and very usable. The one thing that does not work for me is the GPS, and quite honestly, I haven't had time to look in to it.
Here is a complete, working port of PARANOID ANDROID 1.97a for Defy. It is based on Galaxy S2 PARANOID 1.97 and Epsylon's CM10 1208. This is NOT a simple port using the port tool and includes the Framework changes necessary for the hardware.
I take no responsibility for any consequences from your decision to try this rom, and being based on alpha releases, I'm sure there are other problems, but I've personally used this rom for a prolonged period of time and the only problem I've had was with the GPS not locking.
Few things to note:
1. No offense to anyone, but this thread is not for complete noobs. While I will try to help when I can, I cannot promise any level of support. If you don't know how to flash via CWM, this is not for you.
2. This rom is based on the Froyo kernel and has been confirmed to work on MB525 with green as well as red lens. This is no guarantee that it will work on YOUR phone.
3. I intentionally used 1.97 as that version was very stable on my Galaxy Nexus - much moreso than 1.98 or 1.99
4. I've cleared the PARANOID defaults that most of the other PA roms come with. You can manually change the individual app settings under Paranoid Settings, or via the \system\etc\paranoid\properties.conf file which stores a record for every app including DPI and Layout.
5. After installing this rom, I "supercharged" it using a v6supercharger script (link below) and it did seem to help make the rom smoother and more responsive.
Special thanks to Epsylon3 and Quarx for their work on CM10 for the Defy, and Molesarecoming and D4rKn3sSyS for their work on PARANOID.
Thanks to brajesh.sharma87 for pointing out the bootloop "gottcha" of simply recompiling the framework (for specifics google "framework recompile bootloop" and read the first thread that comes up).
I strongly encourage any/all of you to contribute (make donations) to these developers.
DOWNLOAD ROM (double check MD5 before flashing - 96D409B4692319D9DA63FAA9CE1516A6)
Download latest gapps from here.
Here is the v6 supercharger script that I've been using and is confirmed to work with this rom.
Make sure you're on Froyo kernel. Boot in to CWM recovery. Factory reset, wipe data/cache/dalvik. Install rom, followed by gapps. Wipe data/cache/dalvik again. Reboot (should take about 2-5 minutes). Install and configure the v6 script. Enjoy!
Looks pretty neat man! I might give it a shot soon. Any known bugs for now?
This is only PA rom which I manage to get work on my red lens defy without bootloop..
Cheer mate..:good:
now testing..
hm md5 matches, flashed it several times but it cant pass bootanimation :/
(edit: green lense defy)
here tooo stuck at endless bootanim...
o-liver said:
hm md5 matches, flashed it several times but it cant pass bootanimation :/
(edit: green lense defy)
Click to expand...
Click to collapse
meilbox said:
here tooo stuck at endless bootanim...
Click to expand...
Click to collapse
Are you guys running Froyo kernels? Did you do a full wipe of data, cache, and dalvik after the install?
Trying flashing the CM7 kernel, this rom, wiping, and booting right away before you install gapps or anything else. And make sure you give it a full 5 minutes as the first boot can take some time.
Also keep an eye on the led by the proximity sensor. Let me know if it flashes red when it loops.
dew.man said:
Are you guys running Froyo kernels? Did you do a full wipe of data, cache, and dalvik after the install?
Trying flashing the CM7 kernel, this rom, wiping, and booting right away before you install gapps or anything else. And make sure you give it a full 5 minutes as the first boot can take some time.
Also keep an eye on the led by the proximity sensor. Let me know if it flashes red when it loops.
Click to expand...
Click to collapse
bro if kernel was wrong they would have stuck at Moto logo not bootanim...
same with my builds too and the reason y i did not update my thread...
I made paranoid too but never boot... libandroid.runtime has errors as per logs...
and m in no mod to fix it for now...
Sent from my MB526 using xda premium
dew.man said:
Are you guys running Froyo kernels? Did you do a full wipe of data, cache, and dalvik after the install?
Trying flashing the CM7 kernel, this rom, wiping, and booting right away before you install gapps or anything else. And make sure you give it a full 5 minutes as the first boot can take some time.
Also keep an eye on the led by the proximity sensor. Let me know if it flashes red when it loops.
Click to expand...
Click to collapse
did everything what i could, and my led does not flash in red...
nogoodusername said:
bro if kernel was wrong they would have stuck at Moto logo not bootanim...
Click to expand...
Click to collapse
good point.
nogoodusername said:
same with my builds too and the reason y i did not update my thread...
I made paranoid too but never boot... libandroid.runtime has errors as per logs...
and m in no mod to fix it for now...
Click to expand...
Click to collapse
Sorry, didn't even see your thread. Quite honestly, I've only been playing with PA for the last couple of weeks and have posted in rajesh.sharma87 thread as well as the rom porter thread, but nobody over there seems to want to read.
Have you looked at the logs from the devices that loop? Send me one if you have an example. I've tried lots of different combinations in conjunction with the framework-res mods before I got this to boot, but have not had any problems with this version. Interesting...
dew.man said:
good point.
Sorry, didn't even see your thread. Quite honestly, I've only been playing with PA for the last couple of weeks and have posted in rajesh.sharma87 thread as well as the rom porter thread, but nobody over there seems to want to read.
Have you looked at the logs from the devices that loop? Send me one if you have an example. I've tried lots of different combinations in conjunction with the framework-res mods before I got this to boot, but have not had any problems with this version. Interesting...
Click to expand...
Click to collapse
well paranoid jb(gb kernel) no boot for me at all...
havent tried urs m on gb kernel...
i dont have logs m on cm10
i m thinking of setting up git for paranoid... but my internet...:thumbdown:
Sent from my MB526 using xda premium
nogoodusername said:
well paranoid jb(gb kernel) no boot for me at all...
havent tried urs m on gb kernel...
i dont have logs m on cm10
i m thinking of setting up git for paranoid... but my internet...:thumbdown:
Sent from my MB526 using xda premium
Click to expand...
Click to collapse
If you're on Defy red lens, I'd be curious to have you try this rom. I'm starting to think it may be a difference in the hardware.
I'm on BL6 (flashed GB when first leaked), but have been going back and forth between GB and Froyo kernel roms and found Epsy's to be most stable for my device (which is why I used his as the base).
dew.man said:
If you're on Defy red lens, I'd be curious to have you try this rom. I'm starting to think it may be a difference in the hardware.
I'm on BL7 (flashed GB when first leaked), but have been going back and forth between GB and Froyo kernel roms and found Epsy's to be most stable for my device (which is why I used his as the base).
Click to expand...
Click to collapse
How can you be on BL7 and still be able to switch to Froyo kernel?
niksy+ said:
How can you be on BL7 and still be able to switch to Froyo kernel?
Click to expand...
Click to collapse
My bad - it's BL6.
And for those that don't know, there was a leaked Froyo SBF with BL7 (see here).
dew.man said:
If you're on Defy red lens, I'd be curious to have you try this rom. I'm starting to think it may be a difference in the hardware.
I'm on BL6 (flashed GB when first leaked), but have been going back and forth between GB and Froyo kernel roms and found Epsy's to be most stable for my device (which is why I used his as the base).
Click to expand...
Click to collapse
no the kernel has difference...
gb kernel has many missing libs!
Sent from my MB526 using xda premium
Hi dew.man, if u want to continue this, I will close my thread as u know there's no need of having multiple threads for the same work. The intention of the guide and the tool was to let everyone port and use and not polluting the developement thread by posting so many threads. I hope u get my point. If u really wish to take this up I am there with u and will provide u as much help as I can but at the same time we need to respect xda.
Opinion of other users are also welcome so that we can keep the developement thread clean. I've already closed 2 of my threads for the same reason. LewaOS and AOKP JB.
Sent from my MB525 using xda app-developers app
cant acquire logcat, its waiting for the device :/
o-liver said:
cant acquire logcat, its waiting for the device :/
Click to expand...
Click to collapse
dude goto bootmenu-boot-adb enable
press 2nd-init
and logcat...
Sent from my MB526 using xda premium
brajesh.sharma87 said:
Hi dew.man, if u want to continue this, I will close my thread as u know there's no need of having multiple threads for the same work. The intention of the guide and the tool was to let everyone port and use and not polluting the developement thread by posting so many threads. I hope u get my point. If u really wish to take this up I am there with u and will provide u as much help as I can but at the same time we need to respect xda.
Opinion of other users are also welcome so that we can keep the developement thread clean. I've already closed 2 of my threads for the same reason. LewaOS and AOKP JB.
Sent from my MB525 using xda app-developers app
Click to expand...
Click to collapse
First and foremost, thanks for all your help
Perhaps I was not clear enough, but I do not have the free time to take on any kind of support role. Please understand that my sole intention of this thread, was to provide/share a more recent version of PA/CM10 that I have been unable to obtain from anybody else. No offense intended, but I did ask you on several occasions to post a more recent version than the 1.95 you have in your (still existent) thread, and the only response I received was that you didn't have the bandwidth.
I also tried to work through/with kadevil's thread, but he pretty much ignored all the feedback he was getting about the tool not working for PA and JB.
Again, I was looking for a more recent version of PA (1.97+) with a more recent CM10 (8/06+) and was unable to find a working version. I built one that works for me, and wanted to share with anybody else that may be in a similar position...
Well guys i feel that the thread should be merged to brajesh's thread... since his thread has more organized 1st post...
no offence to op but thats wat i felt when i saw it...
peace
-hackergnome
Sent from my MB526 using xda premium
nogoodusername said:
Well guys i feel that the thread should be merged to brajesh's thread... since his thread has more organized 1st post...
no offence to op but thats wat i felt when i saw it...
peace
-hackergnome
Sent from my MB526 using xda premium
Click to expand...
Click to collapse
I'm perfectly fine with that as long as the op/title gets updated with the new version number
Related
Important!
It is strongly recommended that you flash clockwork recovery via NVFlash. If for some reason this or a future nightly build causes your phone to not boot up, you will not be able to boot into recovery unless you have it flashed via NVFlash.
NVFlash for Linux
NVFlash for Windows
To clear up some confusion, if you flashed your recovery via ROM Manager, you didn't actually flash a recovery. It is what we call a fakeflash, you should still probably flash with NVFlash.
Instructions
Download from http://download.cyanogenmod.com/?device=p999 and flash like you would any other ROM (via recovery or ROM Manager).
Be sure to backup before flashing, and of course a wipe is necessary when coming from stock.
Gapps are available from the usual places, however do not download the version that says it is for Tegra, even though this is a tegra device, as it will not flash.
Mod Edit:
Mikey1022 said:
Google Addon: http://goo-inside.me/google-apps/
Check the lastest package available on top
Click to expand...
Click to collapse
ChrisSoyars Edit:
After skimming some of the posts in this thread, here are some things that you can expect.
What to expect
- Everything working including Wifi, GPS, Audio, Camera, Front Facing Camera
- Screen off animation is not enabled, therefore it isn't broken.
- Occasional audio problems (as far as I know they have not been fixed). If audio does not play just reboot.
- Automagical brightness weridness, this is controlled by the kernel and not userspace, even having it working is very hacky.
Any reference to the first thread you need too look up, it's linked here:
http://forum.xda-developers.com/showthread.php?t=1058131
Changelog:
http://cm-nightlies.appspot.com/?device=p999
Thanks!!! Flashing
Is the server still down? The latest I see is 2011-5-25.
gamefreakgcb said:
Is the server still down? The latest I see is 2011-5-25.
Click to expand...
Click to collapse
I don't know whether it is still down or not, but yeah, that's still the latest build
Hrmm awesome, what about the battery stats? Anyone know if that has been fixed?
G2X & Nexus S
brian6685 said:
Hrmm awesome, what about the battery stats? Anyone know if that has been fixed?
G2X & Nexus S
Click to expand...
Click to collapse
Not on cm7 but Faux has made good progress with the help of debauchedsloth
So does this mean nightlies will resume soon?
edit, nvm oops
G2x with faux AOSP and faux orange kernel. [email protected] 5107 quadrant.
For anybody interested this is a build I just compiled about an hour ago
http://www.multiupload.com/6WEZDZMGSX
WHy a new thread? what is new?
aim1126 said:
For anybody interested this is a build I just compiled about an hour ago
http://www.multiupload.com/6WEZDZMGSX
Click to expand...
Click to collapse
How is your compile different from the gigglebread one from this morning?
jawknee530 said:
How is your compile different from the gigglebread one from this morning?
Click to expand...
Click to collapse
I dot think there's any really maybe one or two commits that got merged throughout the day. I just like compiling my own builds
Sent from my LG-P999 using XDA App
I see this thread kinda senseless as there isn't a newer nightly that was available before using the old thread. Although 2 pages seems more manageable then 300+ (which will happen eventually to this thread.)
Being a website developer I know these threads add up pretty quickly (hurray xda!)
I haven't flashed an actual CM rom in almost a week since the server crash. Hopefully the new thread is a sign that the server was repaired and new nightlies are on the way. Using the latest KANGS to get my fix, I know there is lots of progress. Running the latest KANG from today I think the rom is almost ready for a stable release after a few bugs get worked out.
I think the work you guys are doing is fantastic and much appriciated, although it may seem all we do is ***** half the time. Android wouldn't be the same without all of the developers leading the way. Big props. Hope all is well and I plan to continue to follow your work.
aim1126 said:
For anybody interested this is a build I just compiled about an hour ago
http://www.multiupload.com/6WEZDZMGSX
Click to expand...
Click to collapse
Just installed, cheers!
And thanks CM, I'm coming from #34 and just five minutes in its obvious there's been quite a bit of work done. Status Bar brightness slider is sweet.
i see a build 36 but it won't let me download? says its not found...
shniggies said:
i see a build 36 but it won't let me download? says its not found...
Click to expand...
Click to collapse
Probably still being built. Give it some time and check again.
Sounds like buildbot may be back up... this would be nice. <3
reisaru said:
Probably still being built. Give it some time and check again.
Sounds like buildbot may be back up... this would be nice. <3
Click to expand...
Click to collapse
ho ho... i must have checked riiiiiiight when it was uploading... because its downloading now
How did you find build 36 when 35 isn't out yet?
Sent from my LG-P999 using XDA App
This is a strange problem that I only started to have once I installed Team Nekkid 7.2 RC dated 3/29.
I can flash the ROM no problem, wipe dalvik and fix permissions and I'm good to go without any issues. But if I flash the ROM, then either morfic or faux kernel, then gapps, when I go to wipe dalvik, all I get is a quick screen flash with no option to actually wipe dalvik.
I go back and wipe the overall cache completely, fix permissions, the reboot. I am now stuck at the morfic boot animation until i pull battery.
If i try to install a Faux kernel, same thing happens with dalvik, but gets stuck at the blue LG screen.
Once i battery pull and get back to CWM, i wipe everything, reflash ROM and gapps, wipe dalvik and fix permissions no problem and boot up into whatever ROM i choose.
EDIT: Went back and flashed Bionix 1.4.1 and was able to flash a Faux kernel and wipe dalvik. Booting up this ROM now.
I also have NO problem with ICS ROMS/kernels.
When you say NO PROBLEMS with ICS ROMs, does that include Google Maps and the stock browser working perfectly??
Which ICS ROMs have you tried? How is battery life?
Thanks!
Flash kernel last, and redownload the kernels!
Sent from my LG-P999 using xda premium
mt3g said:
Flash kernel last, and redownload the kernels!
Sent from my LG-P999 using xda premium
Click to expand...
Click to collapse
I did all of that. I flashed the kernel before and after gapps but end up with the same result.
I have a feeling there is an issue with the CWM since I am constantly flashing roms/kernels and have never had these problems before. I'm at work so I cant use the Nvidia tool to flash CWM so I have to wait until I get home.
mariuscm said:
When you say NO PROBLEMS with ICS ROMs, does that include Google Maps and the stock browser working perfectly??
Which ICS ROMs have you tried? How is battery life?
Thanks!
Click to expand...
Click to collapse
I meant I have no problem flashing ICS roms and kernels.
mt3g said:
Flash kernel last, and redownload the kernels!
Sent from my LG-P999 using xda premium
Click to expand...
Click to collapse
I usually just follow the instructions precisely by the OP. (Wiping/formatting, flashing rom, gapps, restart + let 10 min stand if required by OP) I have not installed another kernel that what the ROM has included. Should I try that? If yes, which one? I currently have EGB AOSP ICS 4.0.4
[UPDATE] Ok I got it now. Just read your last message
mariuscm said:
I usually just follow the instructions precisely by the OP. (Wiping/formatting, flashing rom, gapps, restart + let 10 min stand if required by OP) I have not installed another kernel that what the ROM has included. Should I try that? If yes, which one? I currently have EGB AOSP ICS 4.0.4
Click to expand...
Click to collapse
Short answer: yes, install a different ROM
Long answer: go to the developing section of the G2X forums and find out the info with the countless threads.
stevew84 said:
Short answer: yes, install a different ROM
Long answer: go to the developing section of the G2X forums and find out the info with the countless threads.
Click to expand...
Click to collapse
I've tried 3 different ICS roms and read hundreds of posts and found nothing that would fix the maps and browser issues. I guess I have to wait a bit more for the devs to work on them. Maybe the lack of drivers is the problem.
mariuscm said:
I've tried 3 different ICS roms and read hundreds of posts and found nothing that would fix the maps and browser issues. I guess I have to wait a bit more for the devs to work on them. Maybe the lack of drivers is the problem.
Click to expand...
Click to collapse
Look for Owain's Unnoficial Build 55 thread, and use Firefox browser, that is the most complete ICS ROM and Firefox doesnt have the rotation problem.
stevew84 said:
Look for Owain's Unnoficial Build 55 thread, and use Firefox browser, that is the most complete ICS ROM and Firefox doesnt have the rotation problem.
Click to expand...
Click to collapse
I was just downloading that ROM
Thanks!
My main concern is Google Maps not working properly. I rely on it in my job a lot and can't have it blanking out on me like that.
I've tried the replacement solution for the stock browser - I installed Dolphin HD. I'll try Firefox, though. Haven't used that on a phone since I had the Nokia N900 - Ah, the good times when I still believed in Nokia
Thanks for your help!
mariuscm said:
I was just downloading that ROM
Thanks!
My main concern is Google Maps not working properly. I rely on it in my job a lot and can't have it blanking out on me like that.
I've tried the replacement solution for the stock browser - I installed Dolphin HD. I'll try Firefox, though. Haven't used that on a phone since I had the Nokia N900 - Ah, the good times when I still believed in Nokia
Thanks for your help!
Click to expand...
Click to collapse
If the maps shows up and then goes blank, simply close the map and re-open it.
I know the close/reopen "trick," but I thought there might be a ROM that just has the Gmaps working. If there's none I'll just wait. Is Owain's unofficial 55 based on 4.0.4 ? I'm also going through his thread now in hopes of finding it. I'll probably just flash and see then.
mariuscm said:
I know the close/reopen "trick," but I thought there might be a ROM that just has the Gmaps working. If there's none I'll just wait. Is Owain's unofficial 55 based on 4.0.4 ? I'm also going through his thread now in hopes of finding it. I'll probably just flash and see then.
Click to expand...
Click to collapse
All the important information will be in the first post of his thread. he doesn't include a change log, though.
mariuscm said:
I know the close/reopen "trick," but I thought there might be a ROM that just has the Gmaps working. If there's none I'll just wait. Is Owain's unofficial 55 based on 4.0.4 ? I'm also going through his thread now in hopes of finding it. I'll probably just flash and see then.
Click to expand...
Click to collapse
Yes, it's 4.0.4 with all of the latest CM9 commits.
Sent from my LG-P999 using xda premium
Hi all! This is my first attempt at a rom, so there are definetly going to be bugs.
This rom was ported from the galaxy nexus stock rom
Ill just post the bugs im aware of, and add to the list when people post them.
Bugs:
All bugs in 7/22 cm10 build for infuse 4g
USB mounting isnt working at all
Maybe debugging too
use power control app for widget toggles
First boot will give tts error, just ignore
Flash instructions:
Must be on ICS ROM!
Wipe data/cache
Wipe davlik-cache
Install zip from sdcard
Reboot
Please post any feed back, and again this is my first rom so thanks for trying it out!
Download:
http://www.mediafire.com/?88sb0g4x6umc766
Thanks:
•Scott, Nun, Yuma, JT, Araemo, PoX, Entropy, and everyone else who helped create the cm10 rom I used to port from
•Elitemovil for the gnex rom
•iall5star for porting it to galaxy s
•mg2915 for his tutorial on how to port roms
Yesss more Jelly
slicingtaco said:
Yesss more Jelly
Click to expand...
Click to collapse
Thanks another JB rom..congrats bro..
slicingtaco said:
Yesss more Jelly
Click to expand...
Click to collapse
Never can have to many jelly beans lol.
I'll give it a try and see how it compares to CM10. Might b a few days tho bc I just flashed the new CM10 build and it's running pretty smooth.
Does this have "Project Butter" included?
Sent from my SGH-I997 using xda app-developers app
No it does not have project butter I'm unaware of what that is, but if you know where to point me to I can try and make a version with that included
Sent from my jelly bean infused infuse
Yummy...glad to see more JB roms popping up
Sent from my SGH-I997 using xda premium
vkumar2695 said:
Yummy...glad to see more JB roms popping up
Sent from my SGH-I997 using xda premium
Click to expand...
Click to collapse
You heard the man you can never have to many jelly beans. Lots and lots of treats
Sent from my SAMSUNG-SGH-I997 using xda premium
thanks Mate...i think it will be a Impressive rom...cheer！
okay quick question..... has anyone tried this yet??
if so please post your experience here
no i won try it myself... i have too much customization made to just flash another rom for now
supernewbdev said:
No it does not have project butter I'm unaware of what that is, but if you know where to point me to I can try and make a version with that included
Sent from my jelly bean infused infuse
Click to expand...
Click to collapse
If you just Google "Project Butter", you'll find a ton of links about it. They will prob do a better job explaining than I will but I can try.
From what I understand, project butter was one of the major changes Google made from ics to jb. It is meant to make the phone quicker and more responsive by making some tweaks to GPU rendering I think and some other things. The team that released Cm10 for the infuse tried to include the code but it caused stability issues on our phone. It did make the phone seem "snappier" but it would randomly freeze so they had to remove the code.
I'm sure there is a lot better information to b found on the web.
Sent from my SGH-I997 using xda app-developers app
raghul said:
okay quick question..... has anyone tried this yet??
if so please post your experience here
no i won try it myself... i have too much customization made to just flash another rom for now
Click to expand...
Click to collapse
I just tried to flash it a couple times but couldn't get past the Samsung Logo. I tried once straight from CM10 and then once after first flashing an ics rom to get blue ics recovery.
Could just b user error but I used the same method as I always do. Full wipes then install. Maybe it was a bad download. I didn't do a MD5 check.
Sent from my SGH-I997 using xda app-developers app
benbos_06 said:
I just tried to flash it a couple times but couldn't get past the Samsung Logo. I tried once straight from CM10 and then once after first flashing an ics rom to get blue ics recovery.
Could just b user error but I used the same method as I always do. Full wipes then install. Maybe it was a bad download. I didn't do a MD5 check.
Sent from my SGH-I997 using xda app-developers app
Click to expand...
Click to collapse
You're right, I had posted the wrong file for download. Please use the updated link!
Sent from my jelly bean infused infuse
supernewbdev said:
You're right, I had posted the wrong file for download. Please use the updated link!
Sent from my jelly bean infused infuse
Click to expand...
Click to collapse
LMFAO:silly:
Just food for thought... CM10 is still in the early development stages.. Its probably a bad idea to start "porting" other ROMs since the actual files that are MEANT for our phone are still being worked on. For project butter, it involves updating the PVR drivers. JT had ported the code over from the crespo kernel to update the PVR drivers, but something seemed to conflict with it as it had random freeze ups. The reason this hasnt been fixed yet, is it is a HUGE change.. Literally hundreds of lines of kernel codes are changed/removed/added so its not a simply thing to pinpoint. Entropy is taking a look this weekend as he found some things to be a mess.
Also, you might want to give some credit in your OP... ALOT of people including myself worked incredibly hard to bring CM10 to the infuse, so its the least you could do for using it as your base.
First off, congrats on getting the port to work, but I have to agree with pretty much everything Scott said. Unfortunately what you mention trying to accomplish is going to take more than just zipping a few files over the top of an existing ROM.
As a good rule of thumb it is always advisable to get permission from the original source if you are going to use it in your build, and from the sounds of Scott's post this hasn't happened. We all like new things and all are trying to improve or phone experience, but it is important to be respectful of the time and effort of those that have come before.
Food for thought as you continue your endeavors and best of luck to you.
Sent from my SGH-I997 using Tapatalk
scott.hart.bti said:
Just food for thought... CM10 is still in the early development stages.. Its probably a bad idea to start "porting" other ROMs since the actual files that are MEANT for our phone are still being worked on. For project butter, it involves updating the PVR drivers. JT had ported the code over from the crespo kernel to update the PVR drivers, but something seemed to conflict with it as it had random freeze ups. The reason this hasnt been fixed yet, is it is a HUGE change.. Literally hundreds of lines of kernel codes are changed/removed/added so its not a simply thing to pinpoint. Entropy is taking a look this weekend as he found some things to be a mess.
Also, you might want to give some credit in your OP... ALOT of people including myself worked incredibly hard to bring CM10 to the infuse, so its the least you could do for using it as your base.
Click to expand...
Click to collapse
A perfect way to put it you two.
Yuma75 said:
First off, congrats on getting the port to work, but I have to agree with pretty much everything Scott said. Unfortunately what you mention trying to accomplish is going to take more than just zipping a few files over the top of an existing ROM.
As a good rule of thumb it is always advisable to get permission from the original source if you are going to use it in your build, and from the sounds of Scott's post this hasn't happened. We all like new things and all are trying to improve or phone experience, but it is important to be respectful of the time and effort of those that have come before.
Food for thought as you continue your endeavors and best of luck to you.
Sent from my SGH-I997 using Tapatalk
Click to expand...
Click to collapse
Sent from my SGH-I997 using xda app-developers app
scott.hart.bti said:
Just food for thought... CM10 is still in the early development stages.. Its probably a bad idea to start "porting" other ROMs since the actual files that are MEANT for our phone are still being worked on. For project butter, it involves updating the PVR drivers. JT had ported the code over from the crespo kernel to update the PVR drivers, but something seemed to conflict with it as it had random freeze ups. The reason this hasnt been fixed yet, is it is a HUGE change.. Literally hundreds of lines of kernel codes are changed/removed/added so its not a simply thing to pinpoint. Entropy is taking a look this weekend as he found some things to be a mess.
Also, you might want to give some credit in your OP... ALOT of people including myself worked incredibly hard to bring CM10 to the infuse, so its the least you could do for using it as your base.
Click to expand...
Click to collapse
I apologize, like I said this is my first port/ROM. If you could tell me who to give the proper credits to, I will put then in the OP. And thank you for the information about project butter
Sent from my jelly bean infused infuse
Yuma75 said:
First off, congrats on getting the port to work, but I have to agree with pretty much everything Scott said. Unfortunately what you mention trying to accomplish is going to take more than just zipping a few files over the top of an existing ROM.
As a good rule of thumb it is always advisable to get permission from the original source if you are going to use it in your build, and from the sounds of Scott's post this hasn't happened. We all like new things and all are trying to improve or phone experience, but it is important to be respectful of the time and effort of those that have come before.
Food for thought as you continue your endeavors and best of luck to you.
Sent from my SGH-I997 using Tapatalk
Click to expand...
Click to collapse
Yes I know that now, I didn't really know that I should get permission for the cm10 too but I did get it for the ROM I ported. Who else worked on the cm10 ROM with you and Scott?
Sent from my jelly bean infused infuse
supernewbdev said:
I apologize, like I said this is my first port/ROM. If you could tell me who to give the proper credits to, I will put then in the OP. And thank you for the information about project butter
Sent from my jelly bean infused infuse
Click to expand...
Click to collapse
Great Job in getting the Port on it's feet!
edit: Apologize for upsetting those that didn't understand me, or for me not being clear...
I wouldn't mind helping test out at all, send me a PM or just tell me what's up in a post on here.
-U.S Army 18x-
Thanks to the encouragement of blindndumb, I've decided to personally make a cm10 rom too. This CM10 Rom also acts as my base for my PA.
So... Yea. As Usual,
Double Thanks for cnote74 for making the kernel too for me as my computer is the most old fashion one :-/
And also 0.0 for teaching me how to port
And also blindndumb for the camera patch
And also ...Awesome... for the amazing AwesomeBeatsv3
And also hdorius for supporting me all the way till now
And also ParanoidAndroid For even making this rom possible
(YES I LOVE THE 2 WORDS AND ALSO )
Flashing Instructions ( Very Important -> You must be on cm10 )
1. Make Sure You're On The Latest CWM Or 4EXT Recovery
2. Make A Backup
3. Wipe Cache and Dalvik
4. Flash ROM ×Still requesting permission before uploading×
5. Flash Gapps ×http://goo.im/gapps/gapps-jb-20120726-signed.zip×
6. Reboot and Enjoy
When will it be released?
It will be released as soon as i get the permissions from other dev and at the same time thanking blindndumb,hdorius and cnote74 for helping me through this difficult times and making it a big success
Why create this thread if you haven't got the rom to release yet?
Sent from my Desire HD using Tapatalk 2
any new info for this rom camera work ! or camcorder work full on this rom ?
kee going great from you
mrbubba999 said:
Why create this thread if you haven't got the rom to release yet?
Sent from my Desire HD using Tapatalk 2
Click to expand...
Click to collapse
I am able to release it right now just need to get the permissions and the links would be up instant. Camera works but camcorder doesn't work for me.
Camera for non samsung sensor, for dhd with omniVision sensor?
Gradjevinac said:
Camera for non samsung sensor, for dhd with omniVision sensor?
Click to expand...
Click to collapse
Huh? o.o
simahu said:
Huh? o.o
Click to expand...
Click to collapse
Multiple sensor vendors for the Camera exist. Just because it is an HTC phone does not mean you have an HTC camera(omnivision or Samsung) You need to know this stuff man:silly:
I can understand if people want to make there own roms. And i really appreciate it if they share the work with the community. But before you do this, you should learn something about how to do this stuff!
Sent from my Desire HD using xda app-developers app
Sorry but I wont be going anywhere near anything you release and I use that term loosely. You appear to be jumping from one genuine developer's rom's to another trying to cobble up your own rom. Just reading your previous posts clearly shows your technical abilities are rather lacking.
Should maybe also add, non or unofficial CM10 rom as well to the title.
IDK
WR
Stop me if i am wrong... But if you compiled CM10 from source then why do you have to wait for permission???? What CM10 rom are you using as a base then??? Jellytime is the only one i know of to boot and run with CM10, and we all know you will not get permission from Random
Guys,
I have already requested a mod take a look at this. I find it weird that his computer cannot compile a kernel but it can compile a rom. Even on my custom built with a 6 core AMD Phenom with 16 GB of RAM it takes about an hour to an hour and a half to compile from source. That would require at least 2 days time on his machine with a melted core. We will see if this is legit. Let the mods take care of this
menditsa said:
Sorry but I wont be going anywhere near anything you release and I use that term loosely. You appear to be jumping from one genuine developer's rom's to another trying to cobble up your own rom. Just reading your previous posts clearly shows your technical abilities are rather lacking.
Click to expand...
Click to collapse
Let me take a peek at this. He thanked people for compliling the kernel and then thanked multiple other people... so he took a bunch of other peoples work and crunched them into one... something seems alittle fishy is all I say. And yes its pretty clean on my part that he doesn't seem to know what he's doing. (Don't get me wrong I'm no where near being a dev but it just seems like he's trying to make himself popular for making one) idk.That's my input so ill just see where this goes. Goodluck
Sent from my Inspire 4G using xda premium
Thread Closed.
Placeholder threads for "coming soon" ROMs are not allowed. Neither are ROMs that use other peoples work without permission.
Note to OP, I you wish to use randomblame's kernel, compile it yourself, its not that hard and there is nothing in the GPL that prevents you from doing so.
I just posted the new BlastOff BML kernel here.
This is the place to ask questions.
Can we get an ETA on when this kernel will land on Mars?
FBis251 said:
Can we get an ETA on when this kernel will land on Mars?
Click to expand...
Click to collapse
Well, soon (no eta) it will land on an updated 'unnamed - bhundven edition' rom!
Not sure if its just me but wifi is showing up as error. I tried redownloading and fixing permissions problem still their.
read the op
WI FI calling isn't working, is it gong to work w/ ?this kernel
Sent from my SGH-T959V using xda premium
mcarbaja said:
WI FI calling isn't working, is it gong to work w/ ?this kernel
Sent from my SGH-T959V using xda premium
Click to expand...
Click to collapse
This kernel is for BML roms. Wifi calling works on those roms because they are stock based.
I'm new to this phone and not sure what bml is or what its used for and is this kernel for ics based roms
asj2583 said:
I'm new to this phone and not sure what bml is or what its used for and is this kernel for ics based roms
Click to expand...
Click to collapse
New to this phone or not. Search is the best feature on XDA.
If it's not BML, it's MTD. Search the Q&A forum for MTD. There you will find a thread by eollie which quotes the epicmtd thread and a post of mine... here it is:
http://forum.xda-developers.com/showthread.php?t=1699506
(yes, I have answered this question a billion times. Why, because no one searches.)
Edit: No, this will not work with MTD roms, like CM7, CM9, AOKP, SlimICS, etc... This will work with Valhalla, Valhalla Black, Unnamed, Stock UVKJ6 based roms.
bhundven said:
New to this phone or not. Search is the best feature on XDA.
If it's not BML, it's MTD. Search the Q&A forum for MTD. There you will find a thread by eollie which quotes the epicmtd thread and a post of mine... here it is:
http://forum.xda-developers.com/showthread.php?t=1699506
(yes, I have answered this question a billion times. Why, because no one searches.)
Edit: No, this will not work with MTD roms, like CM7, CM9, AOKP, SlimICS, etc... This will work with Valhalla, Valhalla Black, Unnamed, Stock UVKJ6 based roms.
Click to expand...
Click to collapse
Thank for the reply, anyway to make it work on non compadiable roms?
Edit: nevermind i read the info on the link you provided and it looks like ics isnt possible on bml
Belongs in Dev?
blazen2000 said:
Not sure if its just me but wifi is showing up as error. I tried redownloading and fixing permissions problem still their.
Click to expand...
Click to collapse
Yes read op.
I first want to than you for your support on a "update for a BML kernel".
i think it belongs in dev but still don't have enough posts to post.
I ran into a few issues with no log cat because of hardware freeze.
1st Tegrak will not load module for custom tweaks. Hardware failure vibrates indefinitely, and battery pull needed. works fine if you don't try and tweak. running 1.4 GHz without optimization works fine but can't underclock because of issue. the screen freezes and becomes pixilated.
restoring from nano backup finishes but stays at gs4g boot screen for t mobile
nano restore might be user error. i just factory reset and restored from there using the one click. restoring nano after one clicking resulted in same boot screen freeze as original
im sorry i don't have log cats but i hope i can provide further information if requested.
running latest Valhalla Black Edition with 1.3 OC undervolted
created backup with VB kernel recovery
booted fine with first flash of kernel running at 1.4
tried tegrak to underclock 1.4 and hardware froze with pixilation of screen in very light but noticable amount
reboot
wifi fix didn't work with flashing with cwm, suceeded with flash just no end result
tried to recover using cwm recovery with modded kernel caused boot freeze
one clicked back with no problems
i love this forum and want to try and provide feedback when possible, thank you for all you have accomplished over the years and i can't wait to see the perfect kernel and modem for ics. FB i love the AOKP. Unicorn Power!!! thank you all for all of your awesome work.
Ughhhh..... Lets break this one down, bit by bit.
rbedell said:
Yes read op.
Click to expand...
Click to collapse
Chill.
rbedell said:
I first want to than you for your support on a "update for a BML kernel".
i think it belongs in dev but still don't have enough posts to post.
Click to expand...
Click to collapse
Just hit thanks. This does not belong in dev.
rbedell said:
I ran into a few issues with no log cat because of hardware freeze.
Click to expand...
Click to collapse
You probably forgot to wipe data/factory reset or something...
rbedell said:
1st Tegrak will not load module for custom tweaks. Hardware failure vibrates indefinitely, and battery pull needed. works fine if you don't try and tweak. running 1.4 GHz without optimization works fine but can't underclock because of issue. the screen freezes and becomes pixilated.
Click to expand...
Click to collapse
Tegrak will not work. This kernel is already OC/UV. You just need setcpu or rom toolbox to set the cpu speed.
rbedell said:
restoring from nano backup finishes but stays at gs4g boot screen for t mobile
nano restore might be user error. i just factory reset and restored from there using the one click. restoring nano after one clicking resulted in same boot screen freeze as original
im sorry i don't have log cats but i hope i can provide further information if requested.
Click to expand...
Click to collapse
nano backup only backs up the kernel. Don't use it!
rbedell said:
running latest Valhalla Black Edition with 1.3 OC undervolted
created backup with VB kernel recovery
booted fine with first flash of kernel running at 1.4
tried tegrak to underclock 1.4 and hardware froze with pixilation of screen in very light but noticable amount
reboot
wifi fix didn't work with flashing with cwm, suceeded with flash just no end result
tried to recover using cwm recovery with modded kernel caused boot freeze
one clicked back with no problems
Click to expand...
Click to collapse
I don't even understand this stuff. You should work on making yourself more clear with ENGLISH grammar. Spell check helps too. Not trying to be a jerk, it's just hard as hell to read.
rbedell said:
i love this forum and want to try and provide feedback when possible, thank you for all you have accomplished over the years and i can't wait to see the perfect kernel and modem for ics. FB i love the AOKP. Unicorn Power!!! thank you all for all of your awesome work.
Click to expand...
Click to collapse
ugh... then say that in the aokp thread, not here.
My crystal ball says: you are younger then 17yo.
You just cleared up a bunch of crap for me... no I'm not 17 I'm 23... was just tired and my battery doesnt hold a charge on the laptop, it shut off a few times before I could post. That was some info and things I had installed and tried to do... Like I said probably user error, I was extremely tired and forgot to wipe my phone first... Ill try and learn from my mistakes. And I'm sorry I forget there is a thanks button...
rbedell said:
You just cleared up a bunch of crap for me... no I'm not 17 I'm 23... was just tired and my battery doesnt hold a charge on the laptop, it shut off a few times before I could post. That was some info and things I had installed and tried to do... Like I said probably user error, I was extremely tired and forgot to wipe my phone first... Ill try and learn from my mistakes. And I'm sorry I forget there is a thanks button...
Click to expand...
Click to collapse
I'm just saying. Everything you type is one long run-on sentence.
Notice how I break mine up.
It makes what you are saying easier to convey to others.
Don't worry. I was tired and grumpy
So what we learned:
Type like you're writing a letter
Don't use nano backup
Download alogcat/alogrec
Wiping cache and dalvik is fine, don't always need to wipe data, but sometimes you do.
I get grumpy sometimes too
:laugh:
Is this the kind of battery life we can expect for the mtd version of this kernel and/or the aries kernel port? I noticed this does have some things from aries (per Github History). The battery life with this kernel is epic, better than anything else I've used.
Thanks,
David
We don't know what kind of battery life you will expect from the ICS kernel because no one has tested the ICS kernel because bryan hasn't finished creating it yet. If and when it's released you'll get to see what kind of battery life you get with the way you use your own phone.
asj2583 said:
I'm new to this phone and not sure what bml is or what its used for and is this kernel for ics based roms
Click to expand...
Click to collapse
iamperson347 said:
Is this the kind of battery life we can expect for the mtd version of this kernel and/or the aries kernel port? I noticed this does have some things from aries (per Github History). The battery life with this kernel is epic, better than anything else I've used.
Thanks,
David
Click to expand...
Click to collapse
FBis251 said:
We don't know what kind of battery life you will expect from the ICS kernel because no one has tested the ICS kernel because bryan hasn't finished creating it yet. If and when it's released you'll get to see what kind of battery life you get with the way you use your own phone.
Click to expand...
Click to collapse
There is a reason for calling this kernel BlastOff. It's going to go through the galaxy of snacks Google has named their Android releases. It's starting off on Planet Gingerbread, BML style.
Eventually, if the stars align, it will end up reincarnated as MTD on Planet Gingerbread.
After reincarnation, it will head towards planet ICS... and on and on...
For now, we are still packing the ship with goodies. OC/UV, governers, I/O schedulers, mmc changes, and bcm4329 have already been packed. But I'm still adding more!
So for the medium term, this kernel will stay BML. You may see me experiment with MTD, but I would stay away from that stuff and stick with the BML kernel for now.
Enjoy my naming scheme.
FBis251 said:
We don't know what kind of battery life you will expect from the ICS kernel because no one has tested the ICS kernel because bryan hasn't finished creating it yet. If and when it's released you'll get to see what kind of battery life you get with the way you use your own phone.
Click to expand...
Click to collapse
No need for that kind of reply, I was simply asking a question. From what I can tell, this does use bits and pieces from Aries and that's what prompted the question. I didn't ask for an eta or anything to that affect. I also know that battery life is dependent on usage, but I know for a fact that on gingerbread the standby time is leaps and bounds better than what we have for ics (currently) (for most users) . It's even been mentioned that the kernel for ics had some battery draining issues by Bryan himself.
Sent from my SGH-T959V using xda app-developers app
That "kind of reply" was merited. Like I said in that post, we're not gonna know how the battery will be until the kernel gets created and tested. I can give you a prediction and tell you that it'll last you 10 days with heavy usage but I may be wrong.
We won't know until we test it.
BTW, unnamed - bhundven edition has been posted to the teamacid github.
I'm not making an official zip yet, as we have some bugs still to work out, but if you want a rom to play around with the new kernel, git clone it and run the mkzip.sh.
Let me know what you think, if you feel so daring
(again, disclaimer, I'm not responsible for messing your phone up, thats your problem. This rom has been tested and won't brick you, unless you do something stupid. This rom will not work with any other kernel, for now.)