Database Info

Best GB ROMs?

I want to go back to GB as I'm not satisfied with the ICS ROMs I've tried (only had this phone a few weeks). Dev board is flooded with ICS, any GB suggestions?
Sent from my Nexus S 4G using Tapatalk

I highly reccomend Oxygen, only problem I ever had with it was sending and recieving mms. Other than that I say it is lightening fast and stable.

Were you able to fix the mms issue?
Sent from my Nexus S 4G using Tapatalk

i'd say BrainMaster's MIUI 2.3.7 ROM , i was running it before i updated to ICS

qtwrk said:
i'd say BrainMaster's MIUI 2.3.7 ROM , i was running it before i updated to ICS
Click to expand...
Click to collapse
Should have mentioned I want everything to work including 4g.
Sent from my Nexus S 4G using Tapatalk

Try .CIBERGR-MOD 's GB version. It's a fast rom. Although, I'm not sure if he has a NS4G version.
Sent from my Nexus S using Tapatalk

Peter Alfonso's GPA19 ROM is the most stable one that I tried. Look for Peter Alfonso's site and click the Downloads link for crespo. I would post a link here, but XDA's nonsense won't allow it.
Download the 12-07-11 one to get the latest GB version. There aren't a lot of customizations like CM, Oxygen, MIUI, etc., but it's stable as hell. The latest Oxygen (2.3.2) has a REALLY obnoxious, and largely ignored, backlight notification bug where you have to reboot to get the lights to go out... only way I've ever found to fix it is to install another kernel. However, Peter Alfonso's got one of those too... just go to his site and it should be on the second page of the "blog."
I know you said you didn't like ICS, and I didn't either at first, but Pete's ICS ROMs are also great and very stable. The latest is 01-30-12, and you can get it from the same crespo download page.

question.
hey man i got a question, could i use peter alfonso's rooted stock rom for gingerbread (right?) when downgrading, right? instead of re rooting it.

charchuck said:
Peter Alfonso's GPA19 ROM is the most stable one that I tried. Look for Peter Alfonso's site and click the Downloads link for crespo. I would post a link here, but XDA's nonsense won't allow it.
Download the 12-07-11 one to get the latest GB version. There aren't a lot of customizations like CM, Oxygen, MIUI, etc., but it's stable as hell. The latest Oxygen (2.3.2) has a REALLY obnoxious, and largely ignored, backlight notification bug where you have to reboot to get the lights to go out... only way I've ever found to fix it is to install another kernel. However, Peter Alfonso's got one of those too... just go to his site and it should be on the second page of the "blog."
I know you said you didn't like ICS, and I didn't either at first, but Pete's ICS ROMs are also great and very stable. The latest is 01-30-12, and you can get it from the same crespo download page.
Click to expand...
Click to collapse
Loaded up the 01-30-12 ICS this morning since that would be the easiest transition. Using Apex and so far, so good. Thanks!
Sent from my Nexus S 4G using Tapatalk

I'm currently running Euroskank CM7 kangs.
Wow, really. I don't have any ICS envy seeing how sweet those kangs are. They're smooth as butter and stable too! Checking my phone, my current uptime is 132 hours (5.5 days) since my last reboot, which was to flash the latest kang back then.

allenxx said:
hey man i got a question, could i use peter alfonso's rooted stock rom for gingerbread (right?) when downgrading, right? instead of re rooting it.
Click to expand...
Click to collapse
I'm not exactly sure what you're asking. Both of his ROMs are pre-rooted, so no, you won't have to re-/root anything. But since you're going from ICS to GB you'll have to wipe everything, so there's no real "downgrade" path.
From a rooting perspective, the only difference I've noticed, that's kind of annoying, is that his GB ROM contains busybox and his ICS ROM doesn't. It's not a deal-breaker since there are Market apps to add it in, but it's kind of annoying that the binary has to be re-linked after each update/flash.

charchuck said:
I'm not exactly sure what you're asking. Both of his ROMs are pre-rooted, so no, you won't have to re-/root anything. But since you're going from ICS to GB you'll have to wipe everything, so there's no real "downgrade" path.
From a rooting perspective, the only difference I've noticed, that's kind of annoying, is that his GB ROM contains busybox and his ICS ROM doesn't. It's not a deal-breaker since there are Market apps to add it in, but it's kind of annoying that the binary has to be re-linked after each update/flash.
Click to expand...
Click to collapse
Im asking that if i can reverted back to gingerbread version without loosing root, may i install his pre-rooted stock without loosing root. Thats all, but since you mentioned it, im relived to revert it back. but i couldnt find his link could you provide me one? Also is it regular to flash it back to gb or is there a special method to do it?

I can't post links yet because our fine friends at XDA say that I need to post more for the privilege. Pfft.
You should be able to type peter alfonso downloads crespo and get to the page. 12-07-11 is the latest GB version (GPA19).
There's no "special" method for flashing, just do what you would do when going from one incompatible ROM to another... wipe data/factory reset, format cache partition, format /system, wipe dalvik cache. There are probably a million different combinations that different people will give you for the proper install, but that's what I normally do.

Tryout CyberGR's CM7 MOD and you won't go back:
http://forum.xda-developers.com/showthread.php?t=1378469
Just read the feedback in the thread and you'll understand.

perfect, and uh before i do that it could be any rooted gb rom right? just curious, that's all.

Don't mean to hijack the thread but what if I wanted to put a custom GB ROM on top of stock GB rom. I'm curious if you can just flash without wiping? Or should I do titanium backup instead?

charchuck said:
I can't post links yet because our fine friends at XDA say that I need to post more for the privilege. Pfft.
.
Click to expand...
Click to collapse
you have only 5 posts and complaining ? I wonder when you hit 100+ post what would you do ? if you don't like the forums why you're here ?

calisoldier83 said:
Don't mean to hijack the thread but what if I wanted to put a custom GB ROM on top of stock GB rom. I'm curious if you can just flash without wiping? Or should I do titanium backup instead?
Click to expand...
Click to collapse
Wipe.
10 chars.

I just put on the Peter Alfonso rom, it's super fast. Well probably keep this until official ics is released.
Sent from my Nexus S 4G using xda premium

How do I do an ADSP firmware update?

I installed the JB ROM JellyTime Beta 7 fine. When I installed JellyTime Beta 8, it hung on the Jellybean boot screen. The OP of the JellyTime thread told someone else with the same problem to update their ADSP firmware for new kernels. I searched and searched, but I couldn't find a reference to how do do that or what it even really was. Could anyone help point me in the right direction?

bananagranola said:
I installed the JB ROM JellyTime Beta 7 fine. When I installed JellyTime Beta 8, it hung on the Jellybean boot screen. The OP of the JellyTime thread told someone else with the same problem to update their ADSP firmware for new kernels. I searched and searched, but I couldn't find a reference to how do do that or what it even really was. Could anyone help point me in the right direction?
Click to expand...
Click to collapse
Sure wish i could get some help with this too.

Have you guys tried the latest releases? When full wiping include format all partitions except sd card.
Sent from a dream.

What latest releases are you referring to? Could you please be more specific?
EDIT: I did a full wipe and reformat of everything, including system, data, and cache.

Right now they are on beta 10. Funny thing, I don't recall anyone mentioning a need to do a adsp firmware update. I don't even know what it is.
Sent from a dream.

I upgraded my radio and ril and it still would not work. I then flashed a stock htc ROM that had sense 3 and then it would take beta 10.
Sent from my Desire HD using xda app-developers app

jlochamy said:
I upgraded my radio and ril and it still would not work. I then flashed a stock htc ROM that had sense 3 and then it would take beta 10.
Click to expand...
Click to collapse
Are you referring to this one?

bananagranola said:
Are you referring to this one?
Click to expand...
Click to collapse
That is the one. But if you don't do a full wipe before you do beta 10 it will have errors. It would still boot but have lots of errors.
Sent from my Desire HD using xda app-developers app

In case anyone is looking for a solution and finds this thread, I can confirm that flashing the stock ROM, wiping, and flashing Beta 10 works.

bananagranola said:
In case anyone is looking for a solution and finds this thread, I can confirm that flashing the stock ROM, wiping, and flashing Beta 10 works.
Click to expand...
Click to collapse
It worked for me as well.
along the same discussion I'd like to ask another question about the new 3.0 kernel.
I'm a weekly ROM changer and usually run IceColdSandwich. Once I switch back to ICS and want to reflash JT to check out the latest improvements/updates, do I have to re-flash the GizRoot_v_2 with the 3.0 kernel then flash JellyTime? Would it work If I did a backup of JellyTime and tried to restore it when a new update comes out or does it become non flashable once I've returned to the older ICS kernel?
In other words, can I flash between ICS and JT without having to go through all the steps to reload the 3.0 kernel?
Thanks in advance to a great community!

uss..p8triot said:
It worked for me as well.
along the same discussion I'd like to ask another question about the new 3.0 kernel.
I'm a weekly ROM changer and usually run IceColdSandwich. Once I switch back to ICS and want to reflash JT to check out the latest improvements/updates, do I have to re-flash the GizRoot_v_2 with the 3.0 kernel then flash JellyTime? Would it work If I did a backup of JellyTime and tried to restore it when a new update comes out or does it become non flashable once I've returned to the older ICS kernel?
In other words, can I flash between ICS and JT without having to go through all the steps to reload the 3.0 kernel?
Thanks in advance to a great community!
Click to expand...
Click to collapse
Nope. You only need to flash the stock once; after that, flash back and forth to your heart's content.

uss..p8triot said:
In other words, can I flash between ICS and JT without having to go through all the steps to reload the 3.0 kernel?
Thanks in advance to a great community!
Click to expand...
Click to collapse
IceColdSandwich runs on a 2.6.5 kernel, and will not work with a 3.0 kernel. Jellytime runs on a 3.0 kernel and will not work with a 2.6.5 kernel. Both of those ROMS have their respective kernels included. You only have to flash the ROM. I'd also recommend a full wipe before each flash as well.
sent from my IceCold Inspire 4G

fatboyRICH said:
IceColdSandwich runs on a 2.6.5 kernel, and will not work with a 3.0 kernel. Jellytime runs on a 3.0 kernel and will not work with a 2.6.5 kernel. Both of those ROMS have their respective kernels included. You only have to flash the ROM. I'd also recommend a full wipe before each flash as well.
sent from my IceCold Inspire 4G
Click to expand...
Click to collapse
usspatriot is actually referring to a separate question. Some of us need to update our firmware to run JB, which can only be done by flashing the latest stock before flashing JB. He wanted to know if the updated firmware would be overwritten by flashing ICS, requiring a reflash of stock before reflashing JB. The ICS and JB kernels are not at issue.

I wonder if this has anything to do with my issue with JB on a Desire HD:
I came from SmartDroid_Reloaded_wwe_1.5.2, did a full wipe, installed, everything works fine for me except for cellular data.
I'm wondering if it's something to do with JB not liking my phone? I've also tried a couple of ICS roms.. See below:
SmartDroid_Reloaded_wwe_1.5.2 = cell data works
Sabsa_Prime_v5.0 = cell data works
TrickDroid_v1.1.1 = cell data works
cm-cfX-20120925-OFFICIAL-ace = no cell data
cm-JellyTime_R10 = no cell data
cm-JellyTime_R10.1 = no cell data
cm-JellyTime_R11 = no cell data
i set my APN's to suit my network (crazy johns in australia) but nothing works..
If i connect to wifi, both the wifi signal and cell signal turn blue, if i disconnect from wifi, both turn grey.
MMS, SMS, Phone calls work fine..
Click to expand...
Click to collapse

JellyBean - JELLYTIME for DHD/Inspire4g - Beta 10 wifi problem

So after installing this amazing rom and loving it for a week or two; I see a kernel update and install it. Everything went smooth but I lost my wifi after the fact. I was hoping someone could help me keep the kernel and get the wifi going. nothing about wifi problems were stated and it work fine previously. I wiped everything and even tried the wifi fix manager thingy i got with the ics rom i was running previously to see if that would do it but to no avail. I wanted to ask the developer but need some 10 post so help a bro out!
p.s....gotta give props to the man who had me running jb before anyone of my friends with newer phones!!! RANDOMBLAME!!!!

bboygmoney said:
So after installing this amazing rom and loving it for a week or two; I see a kernel update and install it. Everything went smooth but I lost my wifi after the fact. I was hoping someone could help me keep the kernel and get the wifi going. nothing about wifi problems were stated and it work fine previously. I wiped everything and even tried the wifi fix manager thingy i got with the ics rom i was running previously to see if that would do it but to no avail. I wanted to ask the developer but need some 10 post so help a bro out!
p.s....gotta give props to the man who had me running jb before anyone of my friends with newer phones!!! RANDOMBLAME!!!!
Click to expand...
Click to collapse
ditto, this happend with my Paranoidandroid install as well. kernel allowed me to stay running without crash, but wifi is a pretty big letdown...
unfortunatly, without the kernel itself being fixed, or the wifi module fixed, we are stuck looking for another alternate kernel... oh yeah, we are pretty limited.

thanks
appreciate the quick reply man. And I'll be keeping my eye out then

bboygmoney said:
appreciate the quick reply man. And I'll be keeping my eye out then
Click to expand...
Click to collapse
found out a very possible reason . are you using his kernel with another system or is this all jt only? he mentioned something about kangbang changing drivers.

dakunesu said:
found out a very possible reason . are you using his kernel with another system or is this all jt only? he mentioned something about kangbang changing drivers.
Click to expand...
Click to collapse
So I'm only using it with jelly time or jb. I'm flashing the os then the kernel cuz the os installs its own. This is an updated kernel for the os.I'm thinking i should maybe wipe the cache partition after the the os then do the kernel but at the same time I would think that other problems would be happening if that was the issue. What do you think?

bboygmoney said:
So I'm only using it with jelly time or jb. I'm flashing the os then the kernel cuz the os installs its own. This is an updated kernel for the os.I'm thinking i should maybe wipe the cache partition after the the os then do the kernel but at the same time I would think that other problems would be happening if that was the issue. What do you think?
Click to expand...
Click to collapse
does the system function without the kernel update?
if it does, you might want to hold off on updating til the ROM updates for it.

dakunesu said:
found out a very possible reason . are you using his kernel with another system or is this all jt only? he mentioned something about kangbang changing drivers.
Click to expand...
Click to collapse
dakunesu said:
does the system function without the kernel update?
if it does, you might want to hold off on updating til the ROM updates for it.
Click to expand...
Click to collapse
It does. N You know I am not even sure what advantages I get from this updated kernel anyways lol but I want it!!

problem solved!
bboygmoney said:
It does. N You know I am not even sure what advantages I get from this updated kernel anyways lol but I want it!!
Click to expand...
Click to collapse
The ROM was updated and the kernel included in the update! Amazing rom , highly recommended especially with the updated kernel!

[ROM] Manual/working port of PARANOID ANDROID 1.97a

UPDATE: After a few additional tweaks to the framework, this rom appears to be working for both green and red lens defy users. I've personally used it as my daily driver for several days this week, and found it to be stable and very usable. The one thing that does not work for me is the GPS, and quite honestly, I haven't had time to look in to it.
Here is a complete, working port of PARANOID ANDROID 1.97a for Defy. It is based on Galaxy S2 PARANOID 1.97 and Epsylon's CM10 1208. This is NOT a simple port using the port tool and includes the Framework changes necessary for the hardware.
I take no responsibility for any consequences from your decision to try this rom, and being based on alpha releases, I'm sure there are other problems, but I've personally used this rom for a prolonged period of time and the only problem I've had was with the GPS not locking.
Few things to note:
1. No offense to anyone, but this thread is not for complete noobs. While I will try to help when I can, I cannot promise any level of support. If you don't know how to flash via CWM, this is not for you.
2. This rom is based on the Froyo kernel and has been confirmed to work on MB525 with green as well as red lens. This is no guarantee that it will work on YOUR phone.
3. I intentionally used 1.97 as that version was very stable on my Galaxy Nexus - much moreso than 1.98 or 1.99
4. I've cleared the PARANOID defaults that most of the other PA roms come with. You can manually change the individual app settings under Paranoid Settings, or via the \system\etc\paranoid\properties.conf file which stores a record for every app including DPI and Layout.
5. After installing this rom, I "supercharged" it using a v6supercharger script (link below) and it did seem to help make the rom smoother and more responsive.
Special thanks to Epsylon3 and Quarx for their work on CM10 for the Defy, and Molesarecoming and D4rKn3sSyS for their work on PARANOID.
Thanks to brajesh.sharma87 for pointing out the bootloop "gottcha" of simply recompiling the framework (for specifics google "framework recompile bootloop" and read the first thread that comes up).
I strongly encourage any/all of you to contribute (make donations) to these developers.
DOWNLOAD ROM (double check MD5 before flashing - 96D409B4692319D9DA63FAA9CE1516A6)
Download latest gapps from here.
Here is the v6 supercharger script that I've been using and is confirmed to work with this rom.​
Make sure you're on Froyo kernel. Boot in to CWM recovery. Factory reset, wipe data/cache/dalvik. Install rom, followed by gapps. Wipe data/cache/dalvik again. Reboot (should take about 2-5 minutes). Install and configure the v6 script. Enjoy!

Looks pretty neat man! I might give it a shot soon. Any known bugs for now?

This is only PA rom which I manage to get work on my red lens defy without bootloop..
Cheer mate..:good:
now testing..

hm md5 matches, flashed it several times but it cant pass bootanimation :/
(edit: green lense defy)

here tooo stuck at endless bootanim...

o-liver said:
hm md5 matches, flashed it several times but it cant pass bootanimation :/
(edit: green lense defy)
Click to expand...
Click to collapse
meilbox said:
here tooo stuck at endless bootanim...
Click to expand...
Click to collapse
Are you guys running Froyo kernels? Did you do a full wipe of data, cache, and dalvik after the install?
Trying flashing the CM7 kernel, this rom, wiping, and booting right away before you install gapps or anything else. And make sure you give it a full 5 minutes as the first boot can take some time.
Also keep an eye on the led by the proximity sensor. Let me know if it flashes red when it loops.

dew.man said:
Are you guys running Froyo kernels? Did you do a full wipe of data, cache, and dalvik after the install?
Trying flashing the CM7 kernel, this rom, wiping, and booting right away before you install gapps or anything else. And make sure you give it a full 5 minutes as the first boot can take some time.
Also keep an eye on the led by the proximity sensor. Let me know if it flashes red when it loops.
Click to expand...
Click to collapse
bro if kernel was wrong they would have stuck at Moto logo not bootanim...
same with my builds too and the reason y i did not update my thread...
I made paranoid too but never boot... libandroid.runtime has errors as per logs...
and m in no mod to fix it for now...
Sent from my MB526 using xda premium

dew.man said:
Are you guys running Froyo kernels? Did you do a full wipe of data, cache, and dalvik after the install?
Trying flashing the CM7 kernel, this rom, wiping, and booting right away before you install gapps or anything else. And make sure you give it a full 5 minutes as the first boot can take some time.
Also keep an eye on the led by the proximity sensor. Let me know if it flashes red when it loops.
Click to expand...
Click to collapse
did everything what i could, and my led does not flash in red...

nogoodusername said:
bro if kernel was wrong they would have stuck at Moto logo not bootanim...
Click to expand...
Click to collapse
good point.
nogoodusername said:
same with my builds too and the reason y i did not update my thread...
I made paranoid too but never boot... libandroid.runtime has errors as per logs...
and m in no mod to fix it for now...
Click to expand...
Click to collapse
Sorry, didn't even see your thread. Quite honestly, I've only been playing with PA for the last couple of weeks and have posted in rajesh.sharma87 thread as well as the rom porter thread, but nobody over there seems to want to read.
Have you looked at the logs from the devices that loop? Send me one if you have an example. I've tried lots of different combinations in conjunction with the framework-res mods before I got this to boot, but have not had any problems with this version. Interesting...

dew.man said:
good point.
Sorry, didn't even see your thread. Quite honestly, I've only been playing with PA for the last couple of weeks and have posted in rajesh.sharma87 thread as well as the rom porter thread, but nobody over there seems to want to read.
Have you looked at the logs from the devices that loop? Send me one if you have an example. I've tried lots of different combinations in conjunction with the framework-res mods before I got this to boot, but have not had any problems with this version. Interesting...
Click to expand...
Click to collapse
well paranoid jb(gb kernel) no boot for me at all...
havent tried urs m on gb kernel...
i dont have logs m on cm10
i m thinking of setting up git for paranoid... but my internet...:thumbdown:
Sent from my MB526 using xda premium

nogoodusername said:
well paranoid jb(gb kernel) no boot for me at all...
havent tried urs m on gb kernel...
i dont have logs m on cm10
i m thinking of setting up git for paranoid... but my internet...:thumbdown:
Sent from my MB526 using xda premium
Click to expand...
Click to collapse
If you're on Defy red lens, I'd be curious to have you try this rom. I'm starting to think it may be a difference in the hardware.
I'm on BL6 (flashed GB when first leaked), but have been going back and forth between GB and Froyo kernel roms and found Epsy's to be most stable for my device (which is why I used his as the base).

dew.man said:
If you're on Defy red lens, I'd be curious to have you try this rom. I'm starting to think it may be a difference in the hardware.
I'm on BL7 (flashed GB when first leaked), but have been going back and forth between GB and Froyo kernel roms and found Epsy's to be most stable for my device (which is why I used his as the base).
Click to expand...
Click to collapse
How can you be on BL7 and still be able to switch to Froyo kernel?

niksy+ said:
How can you be on BL7 and still be able to switch to Froyo kernel?
Click to expand...
Click to collapse
My bad - it's BL6.
And for those that don't know, there was a leaked Froyo SBF with BL7 (see here).

dew.man said:
If you're on Defy red lens, I'd be curious to have you try this rom. I'm starting to think it may be a difference in the hardware.
I'm on BL6 (flashed GB when first leaked), but have been going back and forth between GB and Froyo kernel roms and found Epsy's to be most stable for my device (which is why I used his as the base).
Click to expand...
Click to collapse
no the kernel has difference...
gb kernel has many missing libs!
Sent from my MB526 using xda premium

Hi dew.man, if u want to continue this, I will close my thread as u know there's no need of having multiple threads for the same work. The intention of the guide and the tool was to let everyone port and use and not polluting the developement thread by posting so many threads. I hope u get my point. If u really wish to take this up I am there with u and will provide u as much help as I can but at the same time we need to respect xda.
Opinion of other users are also welcome so that we can keep the developement thread clean. I've already closed 2 of my threads for the same reason. LewaOS and AOKP JB.
Sent from my MB525 using xda app-developers app

cant acquire logcat, its waiting for the device :/

o-liver said:
cant acquire logcat, its waiting for the device :/
Click to expand...
Click to collapse
dude goto bootmenu-boot-adb enable
press 2nd-init
and logcat...
Sent from my MB526 using xda premium

brajesh.sharma87 said:
Hi dew.man, if u want to continue this, I will close my thread as u know there's no need of having multiple threads for the same work. The intention of the guide and the tool was to let everyone port and use and not polluting the developement thread by posting so many threads. I hope u get my point. If u really wish to take this up I am there with u and will provide u as much help as I can but at the same time we need to respect xda.
Opinion of other users are also welcome so that we can keep the developement thread clean. I've already closed 2 of my threads for the same reason. LewaOS and AOKP JB.
Sent from my MB525 using xda app-developers app
Click to expand...
Click to collapse
First and foremost, thanks for all your help
Perhaps I was not clear enough, but I do not have the free time to take on any kind of support role. Please understand that my sole intention of this thread, was to provide/share a more recent version of PA/CM10 that I have been unable to obtain from anybody else. No offense intended, but I did ask you on several occasions to post a more recent version than the 1.95 you have in your (still existent) thread, and the only response I received was that you didn't have the bandwidth.
I also tried to work through/with kadevil's thread, but he pretty much ignored all the feedback he was getting about the tool not working for PA and JB.
Again, I was looking for a more recent version of PA (1.97+) with a more recent CM10 (8/06+) and was unable to find a working version. I built one that works for me, and wanted to share with anybody else that may be in a similar position...

Well guys i feel that the thread should be merged to brajesh's thread... since his thread has more organized 1st post...
no offence to op but thats wat i felt when i saw it...
peace
-hackergnome
Sent from my MB526 using xda premium

nogoodusername said:
Well guys i feel that the thread should be merged to brajesh's thread... since his thread has more organized 1st post...
no offence to op but thats wat i felt when i saw it...
peace
-hackergnome
Sent from my MB526 using xda premium
Click to expand...
Click to collapse
I'm perfectly fine with that as long as the op/title gets updated with the new version number

[Q] please help cm10 have to reboot to recieve text messages

Excuse me if I'm doing this wrong I just really need help and I am new to posting on CDs but not new to rooting anyways I am running cm10 the latest nightly February 3rds nightly and it seems like at times my texting works other times it doesn't same thing with calls the only thing that seems to temporarily fix the problem is if I reboot but then it happens again I have wiped and factory reset flashed different radios and I always seem to have the same problem never have I experience such a problem with rootinformation and flashing it's always been easy breezy any help much appreciated

justanizfamouz said:
Excuse me if I'm doing this wrong I just really need help and I am new to posting on CDs but not new to rooting anyways I am running cm10 the latest nightly February 3rds nightly and it seems like at times my texting works other times it doesn't same thing with calls the only thing that seems to temporarily fix the problem is if I reboot but then it happens again I have wiped and factory reset flashed different radios and I always seem to have the same problem never have I experience such a problem with rootinformation and flashing it's always been easy breezy any help much appreciated
Click to expand...
Click to collapse
Try other nightly. But since you're really looking for a daily driver use stable and stable only.
As far as i understand nightlies are experimental and not meant for daily use.
You say that you have tried several radios, have you tested UCLL3 (that's a link)? Thats the latest (and imho best) radio yet. It's a native jellybean radio so it should work well with CM10.
Also wipe cache & dalvik cache not only factory reset (dalvik is under advanced in cwm).
Good luck

lingowistico said:
Try other nightly. But since you're really looking for a daily driver use stable and stable only.
As far as i understand nightlies are experimental and not meant for daily use.
You say that you have tried several radios, have you tested UCLL3 (that's a link)? Thats the latest (and imho best) radio yet. It's a native jellybean radio so it should work well with CM10.
Also wipe dalvik cache (under advanced in cwm).
Good luck
Click to expand...
Click to collapse
It happens with any nightly or stable ever since I upgraded from cm9 to cm10 but the radio you listed is the one I have I also notice it tends to lag slot no matter what the performance is set at

justanizfamouz said:
It happens with any nightly or stable ever since I upgraded from cm9 to cm10 but the radio you listed is the one I have I also notice it tends to lag slot no matter what the performance is set at
Click to expand...
Click to collapse
Well then i'm out of ideas. Wait for someone else too reply.

Have you tried going back to the beginning? Go back to stock and then flash CM10 Stable. Using the radio that was listed in post good luck.
Sent from my SAMSUNG-SGH-I727 using xda premium

ozziedog said:
Have you tried going back to the beginning? Go back to stock and then flash CM10 Stable. Using the radio that was listed in post good luck.
Sent from my SAMSUNG-SGH-I727 using xda premium
Click to expand...
Click to collapse
+1
This is a good idea. You should try this.