Related
2 METHODS OF PORTING BELOW posted by INCDOES
MANUAL
(FOLLOWING THE GUIDE BELOW)
&
INCDOES PORTING PATCH
(EVERYTHING YOU NEED IN A ZIP)=much easier,should be the obvious choice for most...
USE THE METHOD THAT SUITS YOUR NEEDS...
UPDATE:To avoid confusion, this thread was started before the porting patch was released...i chose to leave the MANUAL directions below posted on incdoes blog for those of us that like to know whats going on behind the scenes of the updater.script=what the patch is doing
UPDATE:
found this on twitter a bit ago...
(courtesy of incdoes)
CHECK OUT THE INCDOES INC 2 EVO PORTING PATCH
CAUTION:
This is not recommended for the ave everday user/know nothing/no time to fudge with my phone crowd...
that being said, now for the fun stuff
i take no credit for any of this other than typing(incdoes leaked most of these port bases). i am just posting links to roms i found in inc forum with the instructions for porting to evo from incs blog. just trying to initiate some more rom development. i am still trying to decide which i will be working on...but this is open source so i just put it here for evo users/devs to view and get porting
ROMS:
DESIRE Z
MT4G
LIquiDsENsE
(hybrid by mmmark111)
HOW TO PORT INC ROM TO EVO
-excerpt from incdoes blog-
Okay, to run an INC ROM on your EVO would be simple. There will be a few broken 'stuff' e.g. bt, wifi etc... but easy fixes!
First you will need the INC ROM you desire to run on your EVO. Now, if its an "INC Sense ROM" you will need a "EVO Sense Kernel" and if it's an AOSP ROM then you will need a AOSP kernel.
Now there will be a few things you will need to replace on the INC ROM to make it run on your EVO:
~We are going to use a sense 2.2 rom as an example~
"so grab these files from any EVO sense ROM, preferable stock 2.2 EVO"
- boot.img (for your phone to bootup)
- system/usr (for buttons)
- system/lib/hw (for lights)
- system/lib/modules (for wifi)
- system/etc/vold.stab (for sdcard readable)
- build.prop (for market and LED's fix)
please note: some prop files include different edits that can break market/data/network/LED's... but then again, easy fixes!
Now you have an INC Sense ROM and 'all the files listed above pulled from an EVO Sense rom, you will have to add/replace the files pulled from the EVO ROM into the INC ROM, sign the .zip and flash (via recovery).
Should/will bootup if its based on the same firmware i.e. 2.2 INC ROM and 2.2 EVO ROM.
DISCLAIMER:
I am not responsible for you bricking your wife's/son's/boss's/aunt's/grandpa's/girlfriend's/fiance's/mother's/etc....evo
good porting
&
happy flashing
THANK YOU
sorry mods if this doesnt qualify as dev, but i cant think of anything describing it better
Nice post(s) mannn!!
too cool-- if i get time i'll definitely go thru this. Thanks!
Thanks. Going to be fun
Sent from my PC36100 using XDA App
I just have one question. So why can't we get the camera to work?
Sorry I'm thinking of the desire roms my bad..
Nice, I'm gonna play with this over the weekend!! Just hope I dont brick my phone
stanglifemike said:
Nice, I'm gonna play with this over the weekend!! Just hope I dont brick my phone
Click to expand...
Click to collapse
You can wait till the weekend, you've got patients man ..
Wonder if this process can be used to port nexus roms?
Probly a couple other things needed.
I had a idea, the Incredible version of the normal LiquidE ROM (not the sense hybrid) seems to have incoming calls working unlike our Evo version. What if we tried porting it using this method, anyone think that might work?
KERKEDAGAIN said:
Nice post(s) mannn!!
Click to expand...
Click to collapse
mkeena0305 said:
Thanks. Going to be fun
Sent from my PC36100 using XDA App
Click to expand...
Click to collapse
fun indeed...
stanglifemike said:
Nice, I'm gonna play with this over the weekend!! Just hope I dont brick my phone
Click to expand...
Click to collapse
i have faith in you
Igotsanevo4g said:
Wonder if this process can be used to port nexus roms?
Probly a couple other things needed.
Click to expand...
Click to collapse
you can try and post back. results would be appreciated.
crpercodani said:
I had a idea, the Incredible version of the normal LiquidE ROM (not the sense hybrid) seems to have incoming calls working unlike our Evo version. What if we tried porting it using this method, anyone think that might work?
Click to expand...
Click to collapse
this is dev, just like any here i put it up for you to try this out yourself(opensourcewin)...let us know how it goes, this is simple please report findings. this could turn into a sweet beta rom thread with a little help...
MagnusRagnarok said:
you can try and post back. results would be appreciated.
.
Click to expand...
Click to collapse
Gonna try, tonight or tomorrow. Fingers crossed...
Edit: I realized the boot.img would be for a sense rom, and nexus is aosp. So i can rip the boot.img from cyanogen out and stick it in the nexus rom and it'll purr?
Or... What?
zone23 said:
You can wait till the weekend, you've got patients man ..
Click to expand...
Click to collapse
OHHH I wish I had patients!! Quite the opposite actually.....just a really busy life.....but I may try to start tonight anyway .
So im flashing a nexus rom right now, that i switched out all the stuff + threw in a cyanogen kernel.
If this thing bricks...
___________
UPDATE: It booted up, but it doesnt register any touch on the touch screen. LOL.
Hmmm maybe if.. Any ideas guys? I switch some other stuff around too. Maybe i can figure this out...
UPDATE: I flashed netarchy universal kernel and now the touch works, i cant get any signal, i dunno what stuff needs to be switch out from GSM to CDMA.
Wifi WORKS! I dont have a keyboard for some reason, so i cant enter my password to test it but it looks to be fine. And since i have no internet connection i cant get astro to install one from my SD haha.
I flashed over sky raider 3.3 final and every thing is perfect. Theres a uncommon sense patch which I also ported because I remember reading that on the hd Rom the ego didn't like the 4 signal bars. Only thing not exactly right is the camera. It doesn't have the capture button but I can take pics by holding a finger on the screen. Video is a no go due to not having the nature button. This Rom is the smoothest I've used and I'm a flash a holic so I've used them all.
So if I use the flash patch do I need to do any of the other stuff listed in the op(replacing files)?
Sweet Magnus, may have to get back to you details of what i find wrong. But i got a porject due next week for school. I have to record us BMXing this weekend. Then make an edit. If i get that sweet alone time in the eveing, i'll be sure happy to port all three and give findings.
Everyone can check my original post, made this about Monday, September 27, 2010
ID
http://incredibledoes.blogspot.com/2010/09/how-2-inc-roms-one-evo.html
Tiffany84 said:
So if I use the flash patch do I need to do any of the other stuff listed in the op(replacing files)?
Click to expand...
Click to collapse
My flashpatch is the same thing,
This post is what i dont want to happen, like i said before there is no point in repacking a whole new zip file when we can just have a flash over patch zip that does all the work for us.
ID
IncredibleDoes said:
My flashpatch is the same thing,
This post is what i dont want to happen, like i said before there is no point in repacking a whole new zip file when we can just have a flash over patch zip that does all the work for us.
ID
Click to expand...
Click to collapse
That really saves a lot of time. Going to give it a test.
Sent from my PC36100 using XDA App
AWESOME! Thank u very much
Hi all! This is my first attempt at a rom, so there are definetly going to be bugs.
This rom was ported from the galaxy nexus stock rom
Ill just post the bugs im aware of, and add to the list when people post them.
Bugs:
All bugs in 7/22 cm10 build for infuse 4g
USB mounting isnt working at all
Maybe debugging too
use power control app for widget toggles
First boot will give tts error, just ignore
Flash instructions:
Must be on ICS ROM!
Wipe data/cache
Wipe davlik-cache
Install zip from sdcard
Reboot
Please post any feed back, and again this is my first rom so thanks for trying it out!
Download:
http://www.mediafire.com/?88sb0g4x6umc766
Thanks:
•Scott, Nun, Yuma, JT, Araemo, PoX, Entropy, and everyone else who helped create the cm10 rom I used to port from
•Elitemovil for the gnex rom
•iall5star for porting it to galaxy s
•mg2915 for his tutorial on how to port roms
Yesss more Jelly
slicingtaco said:
Yesss more Jelly
Click to expand...
Click to collapse
Thanks another JB rom..congrats bro..
slicingtaco said:
Yesss more Jelly
Click to expand...
Click to collapse
Never can have to many jelly beans lol.
I'll give it a try and see how it compares to CM10. Might b a few days tho bc I just flashed the new CM10 build and it's running pretty smooth.
Does this have "Project Butter" included?
Sent from my SGH-I997 using xda app-developers app
No it does not have project butter I'm unaware of what that is, but if you know where to point me to I can try and make a version with that included
Sent from my jelly bean infused infuse
Yummy...glad to see more JB roms popping up
Sent from my SGH-I997 using xda premium
vkumar2695 said:
Yummy...glad to see more JB roms popping up
Sent from my SGH-I997 using xda premium
Click to expand...
Click to collapse
You heard the man you can never have to many jelly beans. Lots and lots of treats
Sent from my SAMSUNG-SGH-I997 using xda premium
thanks Mate...i think it will be a Impressive rom...cheer！
okay quick question..... has anyone tried this yet??
if so please post your experience here
no i won try it myself... i have too much customization made to just flash another rom for now
supernewbdev said:
No it does not have project butter I'm unaware of what that is, but if you know where to point me to I can try and make a version with that included
Sent from my jelly bean infused infuse
Click to expand...
Click to collapse
If you just Google "Project Butter", you'll find a ton of links about it. They will prob do a better job explaining than I will but I can try.
From what I understand, project butter was one of the major changes Google made from ics to jb. It is meant to make the phone quicker and more responsive by making some tweaks to GPU rendering I think and some other things. The team that released Cm10 for the infuse tried to include the code but it caused stability issues on our phone. It did make the phone seem "snappier" but it would randomly freeze so they had to remove the code.
I'm sure there is a lot better information to b found on the web.
Sent from my SGH-I997 using xda app-developers app
raghul said:
okay quick question..... has anyone tried this yet??
if so please post your experience here
no i won try it myself... i have too much customization made to just flash another rom for now
Click to expand...
Click to collapse
I just tried to flash it a couple times but couldn't get past the Samsung Logo. I tried once straight from CM10 and then once after first flashing an ics rom to get blue ics recovery.
Could just b user error but I used the same method as I always do. Full wipes then install. Maybe it was a bad download. I didn't do a MD5 check.
Sent from my SGH-I997 using xda app-developers app
benbos_06 said:
I just tried to flash it a couple times but couldn't get past the Samsung Logo. I tried once straight from CM10 and then once after first flashing an ics rom to get blue ics recovery.
Could just b user error but I used the same method as I always do. Full wipes then install. Maybe it was a bad download. I didn't do a MD5 check.
Sent from my SGH-I997 using xda app-developers app
Click to expand...
Click to collapse
You're right, I had posted the wrong file for download. Please use the updated link!
Sent from my jelly bean infused infuse
supernewbdev said:
You're right, I had posted the wrong file for download. Please use the updated link!
Sent from my jelly bean infused infuse
Click to expand...
Click to collapse
LMFAO:silly:
Just food for thought... CM10 is still in the early development stages.. Its probably a bad idea to start "porting" other ROMs since the actual files that are MEANT for our phone are still being worked on. For project butter, it involves updating the PVR drivers. JT had ported the code over from the crespo kernel to update the PVR drivers, but something seemed to conflict with it as it had random freeze ups. The reason this hasnt been fixed yet, is it is a HUGE change.. Literally hundreds of lines of kernel codes are changed/removed/added so its not a simply thing to pinpoint. Entropy is taking a look this weekend as he found some things to be a mess.
Also, you might want to give some credit in your OP... ALOT of people including myself worked incredibly hard to bring CM10 to the infuse, so its the least you could do for using it as your base.
First off, congrats on getting the port to work, but I have to agree with pretty much everything Scott said. Unfortunately what you mention trying to accomplish is going to take more than just zipping a few files over the top of an existing ROM.
As a good rule of thumb it is always advisable to get permission from the original source if you are going to use it in your build, and from the sounds of Scott's post this hasn't happened. We all like new things and all are trying to improve or phone experience, but it is important to be respectful of the time and effort of those that have come before.
Food for thought as you continue your endeavors and best of luck to you.
Sent from my SGH-I997 using Tapatalk
scott.hart.bti said:
Just food for thought... CM10 is still in the early development stages.. Its probably a bad idea to start "porting" other ROMs since the actual files that are MEANT for our phone are still being worked on. For project butter, it involves updating the PVR drivers. JT had ported the code over from the crespo kernel to update the PVR drivers, but something seemed to conflict with it as it had random freeze ups. The reason this hasnt been fixed yet, is it is a HUGE change.. Literally hundreds of lines of kernel codes are changed/removed/added so its not a simply thing to pinpoint. Entropy is taking a look this weekend as he found some things to be a mess.
Also, you might want to give some credit in your OP... ALOT of people including myself worked incredibly hard to bring CM10 to the infuse, so its the least you could do for using it as your base.
Click to expand...
Click to collapse
A perfect way to put it you two.
Yuma75 said:
First off, congrats on getting the port to work, but I have to agree with pretty much everything Scott said. Unfortunately what you mention trying to accomplish is going to take more than just zipping a few files over the top of an existing ROM.
As a good rule of thumb it is always advisable to get permission from the original source if you are going to use it in your build, and from the sounds of Scott's post this hasn't happened. We all like new things and all are trying to improve or phone experience, but it is important to be respectful of the time and effort of those that have come before.
Food for thought as you continue your endeavors and best of luck to you.
Sent from my SGH-I997 using Tapatalk
Click to expand...
Click to collapse
Sent from my SGH-I997 using xda app-developers app
scott.hart.bti said:
Just food for thought... CM10 is still in the early development stages.. Its probably a bad idea to start "porting" other ROMs since the actual files that are MEANT for our phone are still being worked on. For project butter, it involves updating the PVR drivers. JT had ported the code over from the crespo kernel to update the PVR drivers, but something seemed to conflict with it as it had random freeze ups. The reason this hasnt been fixed yet, is it is a HUGE change.. Literally hundreds of lines of kernel codes are changed/removed/added so its not a simply thing to pinpoint. Entropy is taking a look this weekend as he found some things to be a mess.
Also, you might want to give some credit in your OP... ALOT of people including myself worked incredibly hard to bring CM10 to the infuse, so its the least you could do for using it as your base.
Click to expand...
Click to collapse
I apologize, like I said this is my first port/ROM. If you could tell me who to give the proper credits to, I will put then in the OP. And thank you for the information about project butter
Sent from my jelly bean infused infuse
Yuma75 said:
First off, congrats on getting the port to work, but I have to agree with pretty much everything Scott said. Unfortunately what you mention trying to accomplish is going to take more than just zipping a few files over the top of an existing ROM.
As a good rule of thumb it is always advisable to get permission from the original source if you are going to use it in your build, and from the sounds of Scott's post this hasn't happened. We all like new things and all are trying to improve or phone experience, but it is important to be respectful of the time and effort of those that have come before.
Food for thought as you continue your endeavors and best of luck to you.
Sent from my SGH-I997 using Tapatalk
Click to expand...
Click to collapse
Yes I know that now, I didn't really know that I should get permission for the cm10 too but I did get it for the ROM I ported. Who else worked on the cm10 ROM with you and Scott?
Sent from my jelly bean infused infuse
supernewbdev said:
I apologize, like I said this is my first port/ROM. If you could tell me who to give the proper credits to, I will put then in the OP. And thank you for the information about project butter
Sent from my jelly bean infused infuse
Click to expand...
Click to collapse
Great Job in getting the Port on it's feet!
edit: Apologize for upsetting those that didn't understand me, or for me not being clear...
I wouldn't mind helping test out at all, send me a PM or just tell me what's up in a post on here.
-U.S Army 18x-
UPDATE: After a few additional tweaks to the framework, this rom appears to be working for both green and red lens defy users. I've personally used it as my daily driver for several days this week, and found it to be stable and very usable. The one thing that does not work for me is the GPS, and quite honestly, I haven't had time to look in to it.
Here is a complete, working port of PARANOID ANDROID 1.97a for Defy. It is based on Galaxy S2 PARANOID 1.97 and Epsylon's CM10 1208. This is NOT a simple port using the port tool and includes the Framework changes necessary for the hardware.
I take no responsibility for any consequences from your decision to try this rom, and being based on alpha releases, I'm sure there are other problems, but I've personally used this rom for a prolonged period of time and the only problem I've had was with the GPS not locking.
Few things to note:
1. No offense to anyone, but this thread is not for complete noobs. While I will try to help when I can, I cannot promise any level of support. If you don't know how to flash via CWM, this is not for you.
2. This rom is based on the Froyo kernel and has been confirmed to work on MB525 with green as well as red lens. This is no guarantee that it will work on YOUR phone.
3. I intentionally used 1.97 as that version was very stable on my Galaxy Nexus - much moreso than 1.98 or 1.99
4. I've cleared the PARANOID defaults that most of the other PA roms come with. You can manually change the individual app settings under Paranoid Settings, or via the \system\etc\paranoid\properties.conf file which stores a record for every app including DPI and Layout.
5. After installing this rom, I "supercharged" it using a v6supercharger script (link below) and it did seem to help make the rom smoother and more responsive.
Special thanks to Epsylon3 and Quarx for their work on CM10 for the Defy, and Molesarecoming and D4rKn3sSyS for their work on PARANOID.
Thanks to brajesh.sharma87 for pointing out the bootloop "gottcha" of simply recompiling the framework (for specifics google "framework recompile bootloop" and read the first thread that comes up).
I strongly encourage any/all of you to contribute (make donations) to these developers.
DOWNLOAD ROM (double check MD5 before flashing - 96D409B4692319D9DA63FAA9CE1516A6)
Download latest gapps from here.
Here is the v6 supercharger script that I've been using and is confirmed to work with this rom.
Make sure you're on Froyo kernel. Boot in to CWM recovery. Factory reset, wipe data/cache/dalvik. Install rom, followed by gapps. Wipe data/cache/dalvik again. Reboot (should take about 2-5 minutes). Install and configure the v6 script. Enjoy!
Looks pretty neat man! I might give it a shot soon. Any known bugs for now?
This is only PA rom which I manage to get work on my red lens defy without bootloop..
Cheer mate..:good:
now testing..
hm md5 matches, flashed it several times but it cant pass bootanimation :/
(edit: green lense defy)
here tooo stuck at endless bootanim...
o-liver said:
hm md5 matches, flashed it several times but it cant pass bootanimation :/
(edit: green lense defy)
Click to expand...
Click to collapse
meilbox said:
here tooo stuck at endless bootanim...
Click to expand...
Click to collapse
Are you guys running Froyo kernels? Did you do a full wipe of data, cache, and dalvik after the install?
Trying flashing the CM7 kernel, this rom, wiping, and booting right away before you install gapps or anything else. And make sure you give it a full 5 minutes as the first boot can take some time.
Also keep an eye on the led by the proximity sensor. Let me know if it flashes red when it loops.
dew.man said:
Are you guys running Froyo kernels? Did you do a full wipe of data, cache, and dalvik after the install?
Trying flashing the CM7 kernel, this rom, wiping, and booting right away before you install gapps or anything else. And make sure you give it a full 5 minutes as the first boot can take some time.
Also keep an eye on the led by the proximity sensor. Let me know if it flashes red when it loops.
Click to expand...
Click to collapse
bro if kernel was wrong they would have stuck at Moto logo not bootanim...
same with my builds too and the reason y i did not update my thread...
I made paranoid too but never boot... libandroid.runtime has errors as per logs...
and m in no mod to fix it for now...
Sent from my MB526 using xda premium
dew.man said:
Are you guys running Froyo kernels? Did you do a full wipe of data, cache, and dalvik after the install?
Trying flashing the CM7 kernel, this rom, wiping, and booting right away before you install gapps or anything else. And make sure you give it a full 5 minutes as the first boot can take some time.
Also keep an eye on the led by the proximity sensor. Let me know if it flashes red when it loops.
Click to expand...
Click to collapse
did everything what i could, and my led does not flash in red...
nogoodusername said:
bro if kernel was wrong they would have stuck at Moto logo not bootanim...
Click to expand...
Click to collapse
good point.
nogoodusername said:
same with my builds too and the reason y i did not update my thread...
I made paranoid too but never boot... libandroid.runtime has errors as per logs...
and m in no mod to fix it for now...
Click to expand...
Click to collapse
Sorry, didn't even see your thread. Quite honestly, I've only been playing with PA for the last couple of weeks and have posted in rajesh.sharma87 thread as well as the rom porter thread, but nobody over there seems to want to read.
Have you looked at the logs from the devices that loop? Send me one if you have an example. I've tried lots of different combinations in conjunction with the framework-res mods before I got this to boot, but have not had any problems with this version. Interesting...
dew.man said:
good point.
Sorry, didn't even see your thread. Quite honestly, I've only been playing with PA for the last couple of weeks and have posted in rajesh.sharma87 thread as well as the rom porter thread, but nobody over there seems to want to read.
Have you looked at the logs from the devices that loop? Send me one if you have an example. I've tried lots of different combinations in conjunction with the framework-res mods before I got this to boot, but have not had any problems with this version. Interesting...
Click to expand...
Click to collapse
well paranoid jb(gb kernel) no boot for me at all...
havent tried urs m on gb kernel...
i dont have logs m on cm10
i m thinking of setting up git for paranoid... but my internet...:thumbdown:
Sent from my MB526 using xda premium
nogoodusername said:
well paranoid jb(gb kernel) no boot for me at all...
havent tried urs m on gb kernel...
i dont have logs m on cm10
i m thinking of setting up git for paranoid... but my internet...:thumbdown:
Sent from my MB526 using xda premium
Click to expand...
Click to collapse
If you're on Defy red lens, I'd be curious to have you try this rom. I'm starting to think it may be a difference in the hardware.
I'm on BL6 (flashed GB when first leaked), but have been going back and forth between GB and Froyo kernel roms and found Epsy's to be most stable for my device (which is why I used his as the base).
dew.man said:
If you're on Defy red lens, I'd be curious to have you try this rom. I'm starting to think it may be a difference in the hardware.
I'm on BL7 (flashed GB when first leaked), but have been going back and forth between GB and Froyo kernel roms and found Epsy's to be most stable for my device (which is why I used his as the base).
Click to expand...
Click to collapse
How can you be on BL7 and still be able to switch to Froyo kernel?
niksy+ said:
How can you be on BL7 and still be able to switch to Froyo kernel?
Click to expand...
Click to collapse
My bad - it's BL6.
And for those that don't know, there was a leaked Froyo SBF with BL7 (see here).
dew.man said:
If you're on Defy red lens, I'd be curious to have you try this rom. I'm starting to think it may be a difference in the hardware.
I'm on BL6 (flashed GB when first leaked), but have been going back and forth between GB and Froyo kernel roms and found Epsy's to be most stable for my device (which is why I used his as the base).
Click to expand...
Click to collapse
no the kernel has difference...
gb kernel has many missing libs!
Sent from my MB526 using xda premium
Hi dew.man, if u want to continue this, I will close my thread as u know there's no need of having multiple threads for the same work. The intention of the guide and the tool was to let everyone port and use and not polluting the developement thread by posting so many threads. I hope u get my point. If u really wish to take this up I am there with u and will provide u as much help as I can but at the same time we need to respect xda.
Opinion of other users are also welcome so that we can keep the developement thread clean. I've already closed 2 of my threads for the same reason. LewaOS and AOKP JB.
Sent from my MB525 using xda app-developers app
cant acquire logcat, its waiting for the device :/
o-liver said:
cant acquire logcat, its waiting for the device :/
Click to expand...
Click to collapse
dude goto bootmenu-boot-adb enable
press 2nd-init
and logcat...
Sent from my MB526 using xda premium
brajesh.sharma87 said:
Hi dew.man, if u want to continue this, I will close my thread as u know there's no need of having multiple threads for the same work. The intention of the guide and the tool was to let everyone port and use and not polluting the developement thread by posting so many threads. I hope u get my point. If u really wish to take this up I am there with u and will provide u as much help as I can but at the same time we need to respect xda.
Opinion of other users are also welcome so that we can keep the developement thread clean. I've already closed 2 of my threads for the same reason. LewaOS and AOKP JB.
Sent from my MB525 using xda app-developers app
Click to expand...
Click to collapse
First and foremost, thanks for all your help
Perhaps I was not clear enough, but I do not have the free time to take on any kind of support role. Please understand that my sole intention of this thread, was to provide/share a more recent version of PA/CM10 that I have been unable to obtain from anybody else. No offense intended, but I did ask you on several occasions to post a more recent version than the 1.95 you have in your (still existent) thread, and the only response I received was that you didn't have the bandwidth.
I also tried to work through/with kadevil's thread, but he pretty much ignored all the feedback he was getting about the tool not working for PA and JB.
Again, I was looking for a more recent version of PA (1.97+) with a more recent CM10 (8/06+) and was unable to find a working version. I built one that works for me, and wanted to share with anybody else that may be in a similar position...
Well guys i feel that the thread should be merged to brajesh's thread... since his thread has more organized 1st post...
no offence to op but thats wat i felt when i saw it...
peace
-hackergnome
Sent from my MB526 using xda premium
nogoodusername said:
Well guys i feel that the thread should be merged to brajesh's thread... since his thread has more organized 1st post...
no offence to op but thats wat i felt when i saw it...
peace
-hackergnome
Sent from my MB526 using xda premium
Click to expand...
Click to collapse
I'm perfectly fine with that as long as the op/title gets updated with the new version number
This is Swipers last GB MIUI, modified, still a work in progress. This is open for testers, hence the alpha build, since I need to use my phone today for business today, I can't test myself yet.
Definitely looking for bugs, feedback, etc and I promise, I won't yell at you or laugh at you for posting them. Just remember, I'm a complete amateur at this and am playing it by trial and error and a little advice from my teammates
Android 2.3.7
Miui 2.3.2b1_es
Kernel:Stock CM7
A2SD Baked In
GAPPS Baked In
Basic instructions To Flash
Recommend Smelkus ra-supersonic 4.3 recovery
Wipe Temp files
Wipe Cache
Factory Reset
Superwipe
Flash ROM
Note: SU may Force Close (And I have NO idea why..yet)
Future Plans
Update Kernel
Explore which files can safely be updated to ICS without breaking anything
Add ICS Theming
(Yeah, that'll be a ton of work for a total noob like me)
Update as many apps from ICS MIUI as I can, that will work (MIUI ICS MMS is awesome, want to see if I can make it work on this)
Alpha Build v2a
Restored original Settings.apk (Several white pngs in the ICS Settings.apk)
Updated GAPPS
fixed SU FC (I hope)
Alpha Build Change Log v1a
Added Updated apk's
SU
Titanium backup
Terminal
Sprint VVM
Google Play Store
Added ICS Settings.apk
Added ICS Transitions Mod
Links
MIUI GB/ICS HYBRID http://d-h.st/ILj
Smelkus Recovery http://d-h.st/tbF
Thanks to everyone involved with MIUI and bringing MIUI to the Evo
Thanks to my mates in Team V3nd3tta for making me do this by not doing it for me
And thanks to Mazda for reminding me I can do this all in one thread and take criticism without making people feel stupid
Hmm
Sent from my PC36100 using xda premium
ZzHacks said:
Hmm
Sent from my PC36100 using xda premium
Click to expand...
Click to collapse
You sound skeptical....
Always loved this rom. Good luck with it HipKat
thx... gonna try something else with SU and see if that helps
nice job HipKat running smooth! :good: ...
Mazda said:
When are you guys going to fix the superuser issue??
Is like every ROM with you guys.......I mean is NOT that hard to fix!! Here, I'll even help you out.......
You get your SuperSU by chainfire (google it)...you place the apk in system/app
Then you get the su file and place it in system/xbin and BOOM, it works!
EASIEST THING IN THE WORLD AND YOU GUYS CAN'T FIGURE IT OUT?!?! HAHAHAHA
Click to expand...
Click to collapse
Dude, it's already been fixed.... relax, and if you don't have something productive to add to this test ROM, then why say it??
But hey, thanks for living up to your references in the OP
It was already fixed
HAHAHAHAHAHAHA
HAHA
HA
HipKat said:
Note: SU may Force Close (And I have NO idea why..yet)
fixed SU FC (I hope)
Click to expand...
Click to collapse
Saying things like what you see above doesn't make it seem like you fixed it :good:
I was only going off what you had in your OP. Didn't you make an entire thread about how people's threads got on your nerves because the OP wasn't updated and this and that? BUT yet you're doing the same exact thing??? HAHAHHAHAHA
Also you said you can take criticism but it seems like you're trying to get me to leave the thread.....COME ON DUDE, if you can't take someone reporting bugs and ACTUALLY providing you with fixes then you're nothing but a hypocrite!
Have to have my phone functional tonight cause my womans in the hospital but tomorrow I'll definitely be flashing this and trying it out. I love MIUI but can't run the ICS version due to needing ffc and netflix (BAH) so this will be great. Thanks Team Vendetta for doing something new with MIUI for the people that love the rom.
and now i know why i quit coming to xda
Kreatur3 said:
Have to have my phone functional tonight cause my womans in the hospital but tomorrow I'll definitely be flashing this and trying it out. I love MIUI but can't run the ICS version due to needing ffc and netflix (BAH) so this will be great. Thanks Team Vendetta for doing something new with MIUI for the people that love the rom.
Click to expand...
Click to collapse
No prob. What you said is EXACTLY why we're bringing back; Netflix, FFC, etc. Nice to have that stuff working.
This is what I'm talking about, why the hell all the drama!!! How about we we drop it here guys, I don't know what the hell is going on between all these damn teams lately, but you guys fight like damn school kids man. How about you guys pm'ed out between the whole of you, and leave the threads alone with all the bs. We as members like all of your sh*t because most of us can't do it, no matter what TEAM you're from. Keep the drama between yourself man.
Sent from my PC36100 using xda premium
Sounds great but I really wish some can just like post a rom that's great fully working no bugs smooth for example Cyanogen mod 7 stable and myns warm two point two. Like if your gonna post a rom then make sure it works and its reasonable for FFC and other stuff not to work on a ics rom because the evo Never got ics with HTC updates and if you need testers ask someone like pm people or try it out on free time I made a mistake posting my rom which isn't a full rom like iI didn't do all the work I just added/remove apps and edited build props and took some stuff other stuff out which I'm not gonna do again until I really know hoe to build from source and or heavily theme roms like cm9 or cm7 and edit 9.PNG correctly and I'm available anytime for testing on the weekends and I wish someone will teach me the correct way to build up roms and edit language codes like Java and C++ or at least set me to the right path
I will be flashing this rom some time
Sent from my PC36100 using xda premium
lreyes said:
Sounds great but I really wish some can just like post a rom that's great fully working no bugs smooth for example Cyanogen mod 7 stable and myns warm two point two. Like if your gonna post a rom then make sure it works and its reasonable for FFC and other stuff not to work on a ics rom because the evo Never got ics with HTC updates and if you need testers ask someone like pm people or try it out on free time I made a mistake posting my rom which isn't a full rom like iI didn't do all the work I just added/remove apps and edited build props and took some stuff other stuff out which I'm not gonna do again until I really know hoe to build from source and or heavily theme roms like cm9 or cm7 and edit 9.PNG correctly and I'm available anytime for testing on the weekends and I wish someone will teach me the correct way to build up roms and edit language codes like Java and C++ or at least set me to the right path
I will be flashing this rom some time
Sent from my PC36100 using xda premium
Click to expand...
Click to collapse
Dude, I just gotta ask this - How is it the + key works on your keyboard but not the . or the , keys?
Ferenczy68 said:
Dude, I just gotta ask this - How is it the + key works on your keyboard but not the . or the , keys?
Click to expand...
Click to collapse
Haha I'm using my phone and I'm a 13 yr old teenager which is unbelievable, and I don't type right with the phone I just type and wish it sound great and makes sense.
Sent from my PC36100 using xda premium
lreyes said:
Haha I'm using my phone and I'm a 13 yr old teenager which is unbelievable, and I don't type right with the phone I just type and wish it sound great and makes sense.
Sent from my PC36100 using xda premium
Click to expand...
Click to collapse
I gotcha, cool beans then!
Once this is ok atleast I will keep as daily because I like MIUI and gingerbread because its amazingly delicious
Sent from my PC36100 using xda premium
lreyes said:
Sounds great but I really wish some can just like post a rom that's great fully working no bugs smooth for example Cyanogen mod 7 stable and myns warm two point two. Like if your gonna post a rom then make sure it works and its reasonable for FFC and other stuff not to work on a ics rom because the evo Never got ics with HTC updates and if you need testers ask someone like pm people or try it out on free time I made a mistake posting my rom which isn't a full rom like iI didn't do all the work I just added/remove apps and edited build props and took some stuff other stuff out which I'm not gonna do again until I really know hoe to build from source and or heavily theme roms like cm9 or cm7 and edit 9.PNG correctly and I'm available anytime for testing on the weekends and I wish someone will teach me the correct way to build up roms and edit language codes like Java and C++ or at least set me to the right path
I will be flashing this rom some time
Sent from my PC36100 using xda premium
Click to expand...
Click to collapse
This will get to that. This version is simply a test version and a chance for feedback.
I wish I knew coding from source. I'm trying to learn as I go along with this, since it's ambitious as it is, combining GB & ICS
Ok, if you MUST know, I made simple mistake; copied the newest SU to /system/app/ but forgot to copy the newest SU, Busybox and dexdump over to /xbin/, so there was a compatibility error. Simple as that. An easier fix is to just uninstall SU on anyone that got the first version, reboot, then d/l and install SU.
Since this is my first attempt at doing any type of work on ROM, give me a break, would ya??
Now, back to the topic, please....
We are the developers of AvatarROM .
We have upgraded the ROM to JB (4.2.2). Would anyone be interested to do a beta test.
Instructions:
If it's the first time flashing avatarrom or coming from another ROM
Required: Root + S-OFF (STOCK HBOOT)
Required: at least 512MB ext4 sd-ext partition
Download link
Amazon S3
Reboot to recovery
Flash Gapps - http://woh-roms.weebly.com/gapps.html
Feature request page - https://avatarrom.uservoice.com/forums/193652-avatarrom-feature-request
It's official! :good:
Evervolv base?
have to try and give some feedback,thanks for your work,
Great to see you guys here..!!
What's the difference with the Rom that VJ posted here:
http://forum.xda-developers.com/showthread.php?t=2234114
This one already was 4.2.2
Greetz
Just flashed it. The first bug that I noticed is that the sim card probably is not detected as I have no network connection (didn't ask for pin code and manual network selection gives an error).
TimHermans said:
Great to see you guys here..!!
What's the difference with the Rom that VJ posted here:
http://forum.xda-developers.com/showthread.php?t=2234114
This one already was 4.2.2
Greetz
Click to expand...
Click to collapse
We will officially build for Desire from now on and you will receive updates every week.
bippi79 said:
We will officially build for Desire from now on and you will receive updates every week.
Click to expand...
Click to collapse
nice! can you provide a list of things working and not working?
k3lcior said:
It's official! :good:
Evervolv base?
Click to expand...
Click to collapse
Is it..?
Greetz
TimHermans said:
Is it..?
Greetz
Click to expand...
Click to collapse
In kernel section in about phone, evervolv is mentioned among other things, so to cut the long story short, yes.
Another one kanging Nikez/Evervolv...
Bojan155 said:
Another one kanging Nikez/Evervolv...
Click to expand...
Click to collapse
Why that is bad? In my opinion it is better, so everyone can use whatever he wants, that is the meaning of open source.
Ok it may not good too have x1000 cm10.1 roms and x1000 avatar roms (like in gb times), but having 1(or 2) of each rom type is quite good in my opinion.
Tapatalked with my JellyBean powered HTC Desire
MetinKale38 said:
Why that is bad? In my opinion it is better, so everyone can use whatever he wants, that is the meaning of open source.
Ok it may not good too have x1000 cm10.1 roms and x1000 avatar roms (like in gb times), but having 1(or 2) of each rom type is quite good in my opinion.
Tapatalked with my JellyBean powered HTC Desire
Click to expand...
Click to collapse
at least show some respect and credits from the source you reap.
Bojan155 said:
at least show some respect and credits from the source you reap.
Click to expand...
Click to collapse
Yeah thats right, nothing about nikez/evervolv on the first post
Tapatalked with my JellyBean powered HTC Desire
Bojan155 said:
Another one kanging Nikez/Evervolv...
Click to expand...
Click to collapse
OMGz, dey using exizting stuff!
Ok, seriously, this got sooooo childish over time. I really think nikez & the while team are doing an amazing job, fo' sure.
+ They are open source which is amazing.
So, why would anyone really rewrite the whole thing? Just to grow some imaginary balls? What would you do?
The only question is:
If they (Avatar & everyone who uses their sources) improve the existing stuff, do they also release the sources for everyone?
Have a nice day and please rethink your opinion about this and open source in general.
Sure they haven't mentioned Evervolv yet, but I hope they will edit OP soon and match the rules.
By the way, 99% of those you accuse of "kanging" don't even kang, so get your facts right.
Kanging implies that they use Evervolv code (in this case) and don't admit it.
(I don't even mention that they (EV) would be lost without CAF, Google, CM sources etc.)
WoH said:
OMGz, dey using exizting stuff!
Ok, seriously, this got sooooo childish over time. I really think nikez & the while team are doing an amazing job, fo' sure.
+ They are open source which is amazing.
So, why would anyone really rewrite the whole thing? Just to grow some imaginary balls? What would you do?
The only question is:
If they (Avatar & everyone who uses their sources) improve the existing stuff, do they also release the sources for everyone?
Have a nice day and please rethink your opinion about this and open source in general.
Sure they haven't mentioned Evervolv yet, but I hope they will edit OP soon and match the rules.
By the way, 99% of those you acuuse of "kanging" don't even kang, so get your facts right.
Kanging implies that they use Evervolv code (in this case) and don't admit it.
(I don't even mention that they (EV) would be lost without CAF, Google, CM sources etc.)
Click to expand...
Click to collapse
We want to make sure the rom works fine. Once we get confirmation that it works we will make an official post with Changelog , credits etc. We always provide credits to all the people involved.
Sent from my HTC One X using xda app-developers app
bippi79 said:
We are the developers of AvatarROM .
We have upgraded the ROM to JB (4.2.2). Would anyone be interested to do a beta test.
Instructions:
If it's the first time flashing avatarrom or coming from another ROM
Required: Root + S-OFF (STOCK HBOOT)
Required: at least 512MB ext4 sd-ext partition
Download link
Amazon S3
Reboot to recovery
Flash Gapps - http://woh-roms.weebly.com/gapps.html
Feature request page - https://avatarrom.uservoice.com/forums/193652-avatarrom-feature-request
Click to expand...
Click to collapse
HI op if you want the avatar theme to be the theme applied when Rom is booted for the very 1st time add this to build.prop
persist.sys.themePackageName=com.avatar.theme.Denim
Then the avatar theme will be loaded up by default every time the phone is booted up thanks x
---------- Post added at 06:45 PM ---------- Previous post was at 06:37 PM ----------
Not carrying on the rant over here lol but Come on guy's the whole Rom is not evervolv's just because they ported the Rom DONT make every single app or code in the rom theirs. Yes they may have coded SOME things but NOT everything. So what if the OP used most of the current avatar rom he HAS THE RIGHT to because android is OPEN SOURCE. I am fed up with members on xda all they care about is THIS IS MINE NA NA NA NA NA get a grip of yourselve's are you really going to act like a child for a few codes and a few apps ???? My 2 year old daughter would laugh at you for acting more like a child than she is. Come on guy's developers should SHARE not argue and point the fingers at eachother. And if people didnt KANG or whatever the hell you want to call it then where would most of the rom's on xda be ????? Every developer os sense Rom's KANGED HTC do you see them coming on here chucking their dummy's out the pram ???? because i dont see them doing that. I think it is sad it has to come down to developers arguing like children over some damn files when they should be sticking together like a comunity should. This is why most good hearted developers LEAVE xda because the developers are selfish and act like children. That's all i have to say on the matter. Now i tend to my CHILD. Take care xxxx
bippi79 said:
We want to make sure the rom works fine. Once we get confirmation that it works we will make an official post with Changelog , credits etc. We always provide credits to all the people involved.
Sent from my HTC One X using xda app-developers app
Click to expand...
Click to collapse
Thank you for bring it to bravo!
For people who don't know what is avatar, visit their site.
And this one is based on CM10.1 and kernel from evervolv.
Sent from my HTC Desire using xda premium
I don't understand why everyone starts to accuse people of basing their rom on others' source. Isn't that the whole poing of open source and sourse sharing?
This way, google should accuse and sue every single developer for using the Android source.
So lets just enjoy this ROM, and appreciate that there are still people who work for this device.
Okay I tested this rom and I have to say it's fast but 2 bugs : There is no signal ( probably simcard not detected but not sure) , graphical glitches ( everywhere, not only in YouTube app, the screen kinda tears and acts weird, everyone should know what I mean) . I tested it for a while and that's the bugs I found. It's fast ROM but the glitches and other bugs make me to not use this ROM for now.
Sent from my HTC Desire using xda premium