Database Info

[how to port]inc 2 evo porting patch & tut(+3 roms)

2 METHODS OF PORTING BELOW posted by INCDOES
MANUAL
(FOLLOWING THE GUIDE BELOW)
&
INCDOES PORTING PATCH
(EVERYTHING YOU NEED IN A ZIP)=much easier,should be the obvious choice for most...
USE THE METHOD THAT SUITS YOUR NEEDS...
UPDATE:To avoid confusion, this thread was started before the porting patch was released...i chose to leave the MANUAL directions below posted on incdoes blog for those of us that like to know whats going on behind the scenes of the updater.script=what the patch is doing
UPDATE:
found this on twitter a bit ago...
(courtesy of incdoes)
CHECK OUT THE INCDOES INC 2 EVO PORTING PATCH
CAUTION:
This is not recommended for the ave everday user/know nothing/no time to fudge with my phone crowd...
that being said, now for the fun stuff
i take no credit for any of this other than typing(incdoes leaked most of these port bases). i am just posting links to roms i found in inc forum with the instructions for porting to evo from incs blog. just trying to initiate some more rom development. i am still trying to decide which i will be working on...but this is open source so i just put it here for evo users/devs to view and get porting
ROMS:
DESIRE Z
MT4G
LIquiDsENsE
(hybrid by mmmark111)
HOW TO PORT INC ROM TO EVO
-excerpt from incdoes blog-
Okay, to run an INC ROM on your EVO would be simple. There will be a few broken 'stuff' e.g. bt, wifi etc... but easy fixes!
First you will need the INC ROM you desire to run on your EVO. Now, if its an "INC Sense ROM" you will need a "EVO Sense Kernel" and if it's an AOSP ROM then you will need a AOSP kernel.
Now there will be a few things you will need to replace on the INC ROM to make it run on your EVO:
~We are going to use a sense 2.2 rom as an example~
"so grab these files from any EVO sense ROM, preferable stock 2.2 EVO"
- boot.img (for your phone to bootup)
- system/usr (for buttons)
- system/lib/hw (for lights)
- system/lib/modules (for wifi)
- system/etc/vold.stab (for sdcard readable)
- build.prop (for market and LED's fix)
please note: some prop files include different edits that can break market/data/network/LED's... but then again, easy fixes!
Now you have an INC Sense ROM and 'all the files listed above pulled from an EVO Sense rom, you will have to add/replace the files pulled from the EVO ROM into the INC ROM, sign the .zip and flash (via recovery).
Should/will bootup if its based on the same firmware i.e. 2.2 INC ROM and 2.2 EVO ROM.
DISCLAIMER:
I am not responsible for you bricking your wife's/son's/boss's/aunt's/grandpa's/girlfriend's/fiance's/mother's/etc....evo
good porting
&
happy flashing
THANK YOU
sorry mods if this doesnt qualify as dev, but i cant think of anything describing it better​

Nice post(s) mannn!!

too cool-- if i get time i'll definitely go thru this. Thanks!

Thanks. Going to be fun
Sent from my PC36100 using XDA App

I just have one question. So why can't we get the camera to work?
Sorry I'm thinking of the desire roms my bad..

Nice, I'm gonna play with this over the weekend!! Just hope I dont brick my phone

stanglifemike said:
Nice, I'm gonna play with this over the weekend!! Just hope I dont brick my phone
Click to expand...
Click to collapse
You can wait till the weekend, you've got patients man ..

Wonder if this process can be used to port nexus roms?
Probly a couple other things needed.

I had a idea, the Incredible version of the normal LiquidE ROM (not the sense hybrid) seems to have incoming calls working unlike our Evo version. What if we tried porting it using this method, anyone think that might work?

KERKEDAGAIN said:
Nice post(s) mannn!!
Click to expand...
Click to collapse
mkeena0305 said:
Thanks. Going to be fun
Sent from my PC36100 using XDA App
Click to expand...
Click to collapse
fun indeed...
stanglifemike said:
Nice, I'm gonna play with this over the weekend!! Just hope I dont brick my phone
Click to expand...
Click to collapse
i have faith in you
Igotsanevo4g said:
Wonder if this process can be used to port nexus roms?
Probly a couple other things needed.
Click to expand...
Click to collapse
you can try and post back. results would be appreciated.
crpercodani said:
I had a idea, the Incredible version of the normal LiquidE ROM (not the sense hybrid) seems to have incoming calls working unlike our Evo version. What if we tried porting it using this method, anyone think that might work?
Click to expand...
Click to collapse
this is dev, just like any here i put it up for you to try this out yourself(opensourcewin)...let us know how it goes, this is simple please report findings. this could turn into a sweet beta rom thread with a little help...

MagnusRagnarok said:
you can try and post back. results would be appreciated.
.
Click to expand...
Click to collapse
Gonna try, tonight or tomorrow. Fingers crossed...
Edit: I realized the boot.img would be for a sense rom, and nexus is aosp. So i can rip the boot.img from cyanogen out and stick it in the nexus rom and it'll purr?
Or... What?

zone23 said:
You can wait till the weekend, you've got patients man ..
Click to expand...
Click to collapse
OHHH I wish I had patients!! Quite the opposite actually.....just a really busy life.....but I may try to start tonight anyway .

So im flashing a nexus rom right now, that i switched out all the stuff + threw in a cyanogen kernel.
If this thing bricks...
___________
UPDATE: It booted up, but it doesnt register any touch on the touch screen. LOL.
Hmmm maybe if.. Any ideas guys? I switch some other stuff around too. Maybe i can figure this out...
UPDATE: I flashed netarchy universal kernel and now the touch works, i cant get any signal, i dunno what stuff needs to be switch out from GSM to CDMA.
Wifi WORKS! I dont have a keyboard for some reason, so i cant enter my password to test it but it looks to be fine. And since i have no internet connection i cant get astro to install one from my SD haha.

I flashed over sky raider 3.3 final and every thing is perfect. Theres a uncommon sense patch which I also ported because I remember reading that on the hd Rom the ego didn't like the 4 signal bars. Only thing not exactly right is the camera. It doesn't have the capture button but I can take pics by holding a finger on the screen. Video is a no go due to not having the nature button. This Rom is the smoothest I've used and I'm a flash a holic so I've used them all.

So if I use the flash patch do I need to do any of the other stuff listed in the op(replacing files)?

Sweet Magnus, may have to get back to you details of what i find wrong. But i got a porject due next week for school. I have to record us BMXing this weekend. Then make an edit. If i get that sweet alone time in the eveing, i'll be sure happy to port all three and give findings.

Everyone can check my original post, made this about Monday, September 27, 2010
ID
http://incredibledoes.blogspot.com/2010/09/how-2-inc-roms-one-evo.html

Tiffany84 said:
So if I use the flash patch do I need to do any of the other stuff listed in the op(replacing files)?
Click to expand...
Click to collapse
My flashpatch is the same thing,
This post is what i dont want to happen, like i said before there is no point in repacking a whole new zip file when we can just have a flash over patch zip that does all the work for us.
ID

IncredibleDoes said:
My flashpatch is the same thing,
This post is what i dont want to happen, like i said before there is no point in repacking a whole new zip file when we can just have a flash over patch zip that does all the work for us.
ID
Click to expand...
Click to collapse
That really saves a lot of time. Going to give it a test.
Sent from my PC36100 using XDA App

AWESOME! Thank u very much

[MOD] Extended Quick Settings

So this seems to be the standard of all standard mods for Sense 3 so I thought I'd port it first and post it for everyone to use.
Requirements
rooted
using a DEODEXED ROM
must know how to use ADB or have CWM installed
I used Paul's deodexed stock ROM to build this from.
Had my buddy jface test it out and it seems to be working, here's a screenie he sent me back
Installation
You can either flash the attached zip (untested, someone test it for me!), or push the attached SystemUI.apk to /system/app/SystemUI.apk.
MAKE A NANDROID BACKUP! Just do it. Always. It's so much easier than having to recover from a bad flash or something.

good look bro you beat me to it hahaha thanks man!!

Nice. Trying this out now. Now I can get rid of my profile widget lol.
Sent from my MyTouch 4G Slide

awesome mod! thanks a lot

Thank you! Work's great!
Lily.

can this be merged with UOT? that mod themes the battery and also patches SystemUI.apk.
So only 1 sticks .
The flashable zip does not work for me.

CRT ON/OFF HERE

Has anyone tested to see if this works on Sense 2.1 Gingerbread ROMS?
Sadly I'm still rocking an HTC HD2 and I'm running 2.3.3 with Sense 2.1.
I don't mind being a guinea pig after a nandroid backup but I just figured I'd ask if anyone tried it yet first.

It won't work. You will get a systemui fatal error and a force close loop.
Sent from my myTouch_4G_Slide using xda premium

Undeadk9 said:
It won't work. You will get a systemui fatal error and a force close loop.
Sent from my myTouch_4G_Slide using xda premium
Click to expand...
Click to collapse
Good to know. Does anyone here in this thread know how I can apply these same changes to my current systemui.apk?
I really like the Extended QuickSettings but I'm not too interested in running a Sense 3.0 ROM on a less than capable device like the HD2.

dharvey4651 said:
Has anyone tested to see if this works on Sense 2.1 Gingerbread ROMS?
Sadly I'm still rocking an HTC HD2 and I'm running 2.3.3 with Sense 2.1.
I don't mind being a guinea pig after a nandroid backup but I just figured I'd ask if anyone tried it yet first.
Click to expand...
Click to collapse
From the code I've looked at on Sense 3 ROMs, they typically define whether something is Sense 3 or 2 compatible. So in a real-world example when you're looking at Rosie it has two completely different implementations between 2.1 and 3 and they're both there in the code base. There was no such distinction with quick settings
Dumb ranting aside, I don't see a reason why it won't work on a Sense 2.1 device running Gingerbread. Shoot me over your SystemUI.apk and I might be able to port it. No promises, blind developing sucks

Romanbb said:
From the code I've looked at on Sense 3 ROMs, they typically define whether something is Sense 3 or 2 compatible. So in a real-world example when you're looking at Rosie it has two completely different implementations between 2.1 and 3 and they're both there in the code base. There was no such distinction with quick settings
Dumb ranting aside, I don't see a reason why it won't work on a Sense 2.1 device running Gingerbread. Shoot me over your SystemUI.apk and I might be able to port it. No promises, blind developing sucks
Click to expand...
Click to collapse
Never asked for a promise. The fact that you're willing to give it a shot, even though you don't have the same device as me is MORE than enough for me.
Here's my SystemUI.apk. Just did a nandroid backup so I'm more than happy to go flash happy right about now lol.

dharvey4651 said:
Never asked for a promise. The fact that you're willing to give it a shot, even though you don't have the same device as me is MORE than enough for me.
Here's my SystemUI.apk. Just did a nandroid backup so I'm more than happy to go flash happy right about now lol.
Click to expand...
Click to collapse
I need your com.htc.resource.apk too

Undead how do I use this on ur sense rom??? I tried replacing the system app thing and it got forced close... Any suggestion?
Sent from my Supercharged MT4G Slide Running Undead's Stock Sense ROM using XDA App

Should just flash right over.
Sent from my myTouch_4G_Slide using xda premium

Cool got it to work... The flashed worked but the replacing the system app didn't...
Sent from my Supercharged MT4G Slide Running Undead's Stock Sense ROM using XDA App

Romanbb said:
I need your com.htc.resource.apk too
Click to expand...
Click to collapse
Here you are good sir.
http://www.megaupload.com/?d=MH4YSVW6

m0j09987 said:
Cool got it to work... The flashed worked but the replacing the system app didn't...
Sent from my Supercharged MT4G Slide Running Undead's Stock Sense ROM using XDA App
Click to expand...
Click to collapse
When you do the copy and paste method you must change the permissions. Flashing is much easier.
Sent from my myTouch_4G_Slide using xda premium

dharvey4651 said:
Here you are good sir.
http://www.megaupload.com/?d=MH4YSVW6
Click to expand...
Click to collapse
So, I think it IS possible, but it would take quite some time to go through and merge all the changes and match up all the IDs. I don't have the time or patience to do this as it takes a long time to communicate back and fourth for one single change, or error, etc etc.
Maybe an experienced smali hacker from the HD2 can port it over?
Sorry man

Romanbb said:
So, I think it IS possible, but it would take quite some time to go through and merge all the changes and match up all the IDs. I don't have the time or patience to do this as it takes a long time to communicate back and fourth for one single change, or error, etc etc.
Maybe an experienced smali hacker from the HD2 can port it over?
Sorry man
Click to expand...
Click to collapse
No worries. Like I said, I thought it was cool and figured it would be nice to have. I never expected you to spend a ton of time porting it over. Figured if the current one worked for Sense 2.1 then I'd try it. If not, maybe some other time. The fact that you even took a look at it was good enough for me.
Thanks again man.
-Dan

[ROM][ERA][EC05] Simply AOSP Version 4.01 Released 10/17/11

Simply AOSP 4.0
NOT SO STANDARD DISCLAIMER:
I, nor any of the ERA team is (are?) responsible for bricked phones, damaged SD cards, bad flashes, hurt feelings, crying, sleepless nights, restless leg syndrome, constipation, Cher, or any of the other various things you may encounter by installing custom firmware on your phone. Reboot into recovery, wipe everything 3 times, select ROM. Those are your instructions. Anything you do outside of that is on you.
Changelog:
Completely new base ROM used. Ecooce's as-of-yet unreleased Frankenstein v.4 was used as the base for this version. Ecooce provided a very stable, very small ROM that works perfectly with the Simply AOSP we've come to know and love.
All of the latest and greatest build.prop tweaks have come together to create a very fast and stable ROM with excellent battery life.
Volume Hack (Thanks mkasick)
Hotspot Hack (Thanks necrosan)
RFS/EXT4 Compatible (Thanks Officerpolabear)
Wifi scan interval set to 5 minutes to save battery
Simply Settings theme app included
Original Moto Droid 1 AOSP wallpaper (The one that started it all! Well, sort of...)
Genocide 2.0 Kernel (Thanks Rodderick)
Root/SU in ROM rather than kernel, feel free to flash!
Journaling On by default
No default memory-killing settings: compatible with v6 supercharger and other great scripts (by popular demand!)
Audio files and sound defaults from Cyanogenmod used for alarms, notifications, ringtones, and UI. Really can't get more AOSP than that!
I know everyone says this, but there really is a lot included that isn't listed here. There was a lot of moving and tweaking until just the right mix was found.
Huge thanks to TheDub, JohnCorleone, Ksmullins, Compkid, the ERA Team, and a whole slew of other people that helped with testing and answering questions. I couldn't have done it without you!
A COUPLE OF NOTES:
Updated Changelog
We tried to correct all of the issues that people had mentioned; all of the original UI notification sounds are back, tts service has been put back which should correct any navigation fc's, Revolted kernel is included. Also the same hotspot hack files are included in this that I used in the ERA EC05 ROM, so everything should be good to go there.
As always, let us know what you find! Download Link Below!
HUGE, HUGE thanks to pvtjoker42. He has been instrumental in getting this release out as apparently my internet service provider forgot the "provider" part and I've had no way to upload this. Also his persistence and reliability in testing this ROM have been invaluable. Find him and thank him.
This is EC05 based
The lockscreen mod is NOT built into this ROM. A tough decision to make considering it is one of my very favorite mods, but in the end it detracted from the AOSP feel of the ROM.
After to speaking with TheDub who was kind enough to let me update his ROM, he has suggested not including other themes with the Simply Settings app. While there are many great themes out there, I have chosen to respect his wishes.
You will find the standard Froyo, Touchwiz, and Gingerbread themes included.
This ROM is small; about 117 MB actually. That was one of my goals because if you're anything like me I download a LOT of ROMs directly to my phone. That being said, there aren't a lot of apps included in there. Please make sure you have good, recent backups of anything you may want.
With all of that being said, please download and enjoy! I will be checking this thread OFTEN so please come back and let me know what you think. We have done a lot of testing with this and haven't found any ROM-related problems (personal note, don't try and load 137 apps all at once. It slows things down. Yep, that was me...)
Please let me know if you have run into anything and I will try my best to help you.
UPDATE DOWNLOAD 10.17.11
http://www.multiupload.com/T0J3UQR97E
ARCHIVED DOWNLOAD:
http://www.multiupload.com/FEQLBID3N2
How-To video from the renowned Qbking77!
http://www.youtube.com/watch?v=235ShHyObRU

Reserved....
Add-ons:
This zip will replace all of the original Notification sounds that some users said were missing from the UI folder:
http://www.multiupload.com/P6XBBKT0K2
Flashable zip to replace stock email app:
http://www.multiupload.com/GNUHYHI4LF
Flashable zip to replace stock TouchWiz Calendar:
http://www.multiupload.com/O6U1QUBT3Q
Revolted Kernel Flashable Zip:
http://www.multiupload.com/GXY3KOAP3J

Reserved....
Free Parking......

Reserved....
I like it best when you play where you put all of the money in the middle and then when you land of free parking you get the.........nevermind.

.....and its live! Thanks fo anderson620,ERA, and those who were involved.
Sent from my SPH-D700 using xda premium

Whoop whoop!
Posted by Mr. Z's Epic 4G Touch+Keyboard

What base is it built on? Froyo or gingy? What alphabet soup mods/themes can be used on it?
Thanks for your hard work and dedication!
sent from my fully armed and operational space phone

SwimDrewid said:
What base is it built on? Froyo or gingy? What alphabet soup mods/themes can be used on it?
Thanks for your hard work and dedication!
sent from my fully armed and operational space phone
Click to expand...
Click to collapse
Its Froyo.
Sent from my SPH-D710 using xda premium

SwimDrewid said:
What base is it built on? Froyo or gingy? What alphabet soup mods/themes can be used on it?
Thanks for your hard work and dedication!
sent from my fully armed and operational space phone
Click to expand...
Click to collapse
This is based off of Froyo. I try and leave all of the leaks to ksmullins and I kinda fool with all of our EC05 Roms. Until GB drops, that is, and I'm out of a job!
The hotspot and volume hacks are included but the lockscreen isn't. In order to add it (and I haven't tested this theory) I would think it best to use an AIO Mod rather than just the lockscreen mod as they seem to modify some of the same files and I'm not sure if everything would be functional afterwards.
Also, JohnCorleone and a couple of others had tested with various EC05 themes and found no problems. I would venture to say that 'most' EC05 themes should work just fine.

JohnCorleone said:
Its Froyo.
Sent from my SPH-D710 using xda premium
Click to expand...
Click to collapse
Title and OP updated.

Do I have to go back EC05 to flash this rom
Sent from my SPH-D700 using xda premium

Glewis21 said:
Do I have to go back EC05 to flash this rom
Sent from my SPH-D700 using xda premium
Click to expand...
Click to collapse
As long as you are on the most current CWM and wipe everything 3 times you should be fine. I've personally flashed between GB and Froyo countless times without any problems.

Anyone willing to provide some "sexy screenshots" of this ROM?
Sent from my SPH-D700 using xda premium

If no one else gets any put up I will try to get some screen shots tomorrow if I can. (That turned out about as non-committal as possible...truth is mine doesn't look like stock anymore but if need be I can reflash and take some.)

anderson620 said:
As long as you are on the most current CWM and wipe everything 3 times you should be fine. I've personally flashed between GB and Froyo countless times without any problems.
Click to expand...
Click to collapse
Thanks
Sent from my SPH-D700 using xda premium

Awesome, I'm flashing this ASAP...

Will you... marry me? OH also, i'm having a bit of trouble with system sounds. Is it just me?

Thanks!! Wow, a new Froyo ROM, this late in the dance! I'm psyched!
JohnC or KyleS- any advice on themes? Do the B-Reezy themes that Kyle modified with Maddog's lock mod work ok? I will be trying out myself later- gotta mow the lawn first.
Sent from my SPH-D700 using xda premium

kylesum said:
Will you... marry me? OH also, i'm having a bit of trouble with system sounds. Is it just me?
Click to expand...
Click to collapse
NO not just u ..Not all the system sounds are in the rom.. U will need to add them like i did..

Give me an hour and I'll get you some screenshots.

[Q] Creating Custom roms for galaxy s 4g

i was wondering if there was anyone that can help me out, ive never made one but if someone would be awesome and tell me where to start. i wanna give it a try and recently found alot of time in my hands. Well dont be so cruel in the posts if this is a stupid question. thanks.

your not alone

grab a ROM from me, raver, or whitehawkx and study everything about it read read read
Sent from my SGH-T959V using XDA Premium App

Please use the Q&A Forum for questions Thanks
Moving to Q&A

dsexton... well i want to do that but im not quite sure where to start i mean ive flashed over 20 different roms on my phone so i get one of those roms and unzip it? or what? sorry again but im a nueb lol

erikmm said:
dsexton... well i want to do that but im not quite sure where to start i mean ive flashed over 20 different roms on my phone so i get one of those roms and unzip it? or what? sorry again but im a nueb lol
Click to expand...
Click to collapse
Unzip them and study them, i.e. files,apps and catalogs.
A quick question : what do you want for your ROM?
Sent from my SGH-T959V using XDA App

spy4ka said:
A quick question : what do you want for your ROM?
Sent from my SGH-T959V using XDA App
Click to expand...
Click to collapse
i was going to start making my own rom then i asked myself that question...couldnt answer it with something not already on the current roms -_-
Sent from my potato using xda premium

the thing you gotta ask yourself like the others are saying is what do you want your rom to have. you want a theme feel to it or do you wanna keep it looking stock. also gotta figure if you wanna add some tweaks or not. there's a lot you gotta figure out before you make a rom. also, you gotta know a lot about what does what when tweaking and all that. i was also thinking about doing some roms myself, but then decided against cause i for one don't have the time nor do i have the patience the devs here have. you also gotta remember that there are gonna be people here who want you to change some things about your rom. and not to mention, you gotta have the time to offer support for it as well. if you do decide to go for it, i wish you the best of luck and look forward to seeing your work.

well i do want to learn how to tweak the phone and themes and all that good stuff, i recently messaged raver and he gave me a good start, so i will start studying linux and java then ill be back hopefully with enough info to tweak some newer OS leak or if anything help out on another phone ( hopefully it wont be that long) but like i said i want to learn for self knowledge and also to help create some awesome stuff in the XDA
and i do have the time to support and modify roms as needed.
so if anyone has any advice on the best way to learn linux and java faster post post post!!! lol
and ill come back and read between my readings thanks for not being jerks by the way lol

Also i might base my rom on Android 2.1 J/K haha but im off to a good start tonight

erikmm said:
Also i might base my rom on Android 2.1 J/K haha but im off to a good start tonight
Click to expand...
Click to collapse
if you wanna base a rom on froyo, by all means go for it. you would be surprised how many people still run on froyo here. some are afraid to take the plunge to gingerbread cause its not official yet for our device. go with what you feel is best. personally, i think there should be a dev who still makes roms for froyo for those who don't wanna take the plunge. its all up to you though. good luck with your journey either way though.

your right im on raver's octaine and its cool but a couple days ago i flashed back to Audiophile Redux 1.3.3 and i saw a big difference in radio and wifi strength so i might actually start off with a Froyo rom, but i was just making a joke earlier cus i said 2.1 like an eclair rom lol

sence so many are intrested in this actually didnt think that many would.. after i update my roms maybe before then i dono... Ill make you all a compendium of how to build apps how to modify exzisting roms how to build your own rom aka asop how to port roms theme them etc... Ill also prob ask krylon and whitehawk and any other dev that wants to contribute to this. If anyone does. It doesnt hurt and hey if a few ore devs come out of it so be it .. If anyone ever has a question 99 percent of the time u can ask people i will reply and give u the answer or if i dont know the answer ill direct you to the proper place to look for it

haha aawesome!!! see this is exactly why i only flash Raver roms!!! wooo i went from octaine 1.0 to audiophile redux to octaine 2.x to audiophile x2 back to octaine 2.x haha
If Raver leaves my phones post- SGS4G will all remain stock lol

im also looking into modding nd tweaking roms myself so a guide like the one raver is gonna make would be very helpful. thanks in advance

As the OP can i erase some comments on this post? lol just asking...again!
also one more question im back to Audiophile Redux 1.3.3 would the SGS4G Adrenaline shot v12 work with my Froyo rom?

[PORT] [JB] [Galaxy Nexus] Stock JRO03E

Hi all! This is my first attempt at a rom, so there are definetly going to be bugs.
This rom was ported from the galaxy nexus stock rom
Ill just post the bugs im aware of, and add to the list when people post them.
Bugs:
All bugs in 7/22 cm10 build for infuse 4g
USB mounting isnt working at all
Maybe debugging too
use power control app for widget toggles
First boot will give tts error, just ignore
Flash instructions:
Must be on ICS ROM!
Wipe data/cache
Wipe davlik-cache
Install zip from sdcard
Reboot
Please post any feed back, and again this is my first rom so thanks for trying it out!
Download:
http://www.mediafire.com/?88sb0g4x6umc766
Thanks:
•Scott, Nun, Yuma, JT, Araemo, PoX, Entropy, and everyone else who helped create the cm10 rom I used to port from
•Elitemovil for the gnex rom
•iall5star for porting it to galaxy s
•mg2915 for his tutorial on how to port roms

Yesss more Jelly

slicingtaco said:
Yesss more Jelly
Click to expand...
Click to collapse
Thanks another JB rom..congrats bro..

slicingtaco said:
Yesss more Jelly
Click to expand...
Click to collapse
Never can have to many jelly beans lol.
I'll give it a try and see how it compares to CM10. Might b a few days tho bc I just flashed the new CM10 build and it's running pretty smooth.
Does this have "Project Butter" included?
Sent from my SGH-I997 using xda app-developers app

No it does not have project butter I'm unaware of what that is, but if you know where to point me to I can try and make a version with that included
Sent from my jelly bean infused infuse

Yummy...glad to see more JB roms popping up
Sent from my SGH-I997 using xda premium

vkumar2695 said:
Yummy...glad to see more JB roms popping up
Sent from my SGH-I997 using xda premium
Click to expand...
Click to collapse
You heard the man you can never have to many jelly beans. Lots and lots of treats
Sent from my SAMSUNG-SGH-I997 using xda premium

thanks Mate...i think it will be a Impressive rom...cheer！

okay quick question..... has anyone tried this yet??
if so please post your experience here
no i won try it myself... i have too much customization made to just flash another rom for now

supernewbdev said:
No it does not have project butter I'm unaware of what that is, but if you know where to point me to I can try and make a version with that included
Sent from my jelly bean infused infuse
Click to expand...
Click to collapse
If you just Google "Project Butter", you'll find a ton of links about it. They will prob do a better job explaining than I will but I can try.
From what I understand, project butter was one of the major changes Google made from ics to jb. It is meant to make the phone quicker and more responsive by making some tweaks to GPU rendering I think and some other things. The team that released Cm10 for the infuse tried to include the code but it caused stability issues on our phone. It did make the phone seem "snappier" but it would randomly freeze so they had to remove the code.
I'm sure there is a lot better information to b found on the web.
Sent from my SGH-I997 using xda app-developers app

raghul said:
okay quick question..... has anyone tried this yet??
if so please post your experience here
no i won try it myself... i have too much customization made to just flash another rom for now
Click to expand...
Click to collapse
I just tried to flash it a couple times but couldn't get past the Samsung Logo. I tried once straight from CM10 and then once after first flashing an ics rom to get blue ics recovery.
Could just b user error but I used the same method as I always do. Full wipes then install. Maybe it was a bad download. I didn't do a MD5 check.
Sent from my SGH-I997 using xda app-developers app

benbos_06 said:
I just tried to flash it a couple times but couldn't get past the Samsung Logo. I tried once straight from CM10 and then once after first flashing an ics rom to get blue ics recovery.
Could just b user error but I used the same method as I always do. Full wipes then install. Maybe it was a bad download. I didn't do a MD5 check.
Sent from my SGH-I997 using xda app-developers app
Click to expand...
Click to collapse
You're right, I had posted the wrong file for download. Please use the updated link!
Sent from my jelly bean infused infuse

supernewbdev said:
You're right, I had posted the wrong file for download. Please use the updated link!
Sent from my jelly bean infused infuse
Click to expand...
Click to collapse
LMFAO:silly:

Just food for thought... CM10 is still in the early development stages.. Its probably a bad idea to start "porting" other ROMs since the actual files that are MEANT for our phone are still being worked on. For project butter, it involves updating the PVR drivers. JT had ported the code over from the crespo kernel to update the PVR drivers, but something seemed to conflict with it as it had random freeze ups. The reason this hasnt been fixed yet, is it is a HUGE change.. Literally hundreds of lines of kernel codes are changed/removed/added so its not a simply thing to pinpoint. Entropy is taking a look this weekend as he found some things to be a mess.
Also, you might want to give some credit in your OP... ALOT of people including myself worked incredibly hard to bring CM10 to the infuse, so its the least you could do for using it as your base.

First off, congrats on getting the port to work, but I have to agree with pretty much everything Scott said. Unfortunately what you mention trying to accomplish is going to take more than just zipping a few files over the top of an existing ROM.
As a good rule of thumb it is always advisable to get permission from the original source if you are going to use it in your build, and from the sounds of Scott's post this hasn't happened. We all like new things and all are trying to improve or phone experience, but it is important to be respectful of the time and effort of those that have come before.
Food for thought as you continue your endeavors and best of luck to you.
Sent from my SGH-I997 using Tapatalk

scott.hart.bti said:
Just food for thought... CM10 is still in the early development stages.. Its probably a bad idea to start "porting" other ROMs since the actual files that are MEANT for our phone are still being worked on. For project butter, it involves updating the PVR drivers. JT had ported the code over from the crespo kernel to update the PVR drivers, but something seemed to conflict with it as it had random freeze ups. The reason this hasnt been fixed yet, is it is a HUGE change.. Literally hundreds of lines of kernel codes are changed/removed/added so its not a simply thing to pinpoint. Entropy is taking a look this weekend as he found some things to be a mess.
Also, you might want to give some credit in your OP... ALOT of people including myself worked incredibly hard to bring CM10 to the infuse, so its the least you could do for using it as your base.
Click to expand...
Click to collapse
A perfect way to put it you two.
Yuma75 said:
First off, congrats on getting the port to work, but I have to agree with pretty much everything Scott said. Unfortunately what you mention trying to accomplish is going to take more than just zipping a few files over the top of an existing ROM.
As a good rule of thumb it is always advisable to get permission from the original source if you are going to use it in your build, and from the sounds of Scott's post this hasn't happened. We all like new things and all are trying to improve or phone experience, but it is important to be respectful of the time and effort of those that have come before.
Food for thought as you continue your endeavors and best of luck to you.
Sent from my SGH-I997 using Tapatalk
Click to expand...
Click to collapse
Sent from my SGH-I997 using xda app-developers app

scott.hart.bti said:
Just food for thought... CM10 is still in the early development stages.. Its probably a bad idea to start "porting" other ROMs since the actual files that are MEANT for our phone are still being worked on. For project butter, it involves updating the PVR drivers. JT had ported the code over from the crespo kernel to update the PVR drivers, but something seemed to conflict with it as it had random freeze ups. The reason this hasnt been fixed yet, is it is a HUGE change.. Literally hundreds of lines of kernel codes are changed/removed/added so its not a simply thing to pinpoint. Entropy is taking a look this weekend as he found some things to be a mess.
Also, you might want to give some credit in your OP... ALOT of people including myself worked incredibly hard to bring CM10 to the infuse, so its the least you could do for using it as your base.
Click to expand...
Click to collapse
I apologize, like I said this is my first port/ROM. If you could tell me who to give the proper credits to, I will put then in the OP. And thank you for the information about project butter
Sent from my jelly bean infused infuse

Yuma75 said:
First off, congrats on getting the port to work, but I have to agree with pretty much everything Scott said. Unfortunately what you mention trying to accomplish is going to take more than just zipping a few files over the top of an existing ROM.
As a good rule of thumb it is always advisable to get permission from the original source if you are going to use it in your build, and from the sounds of Scott's post this hasn't happened. We all like new things and all are trying to improve or phone experience, but it is important to be respectful of the time and effort of those that have come before.
Food for thought as you continue your endeavors and best of luck to you.
Sent from my SGH-I997 using Tapatalk
Click to expand...
Click to collapse
Yes I know that now, I didn't really know that I should get permission for the cm10 too but I did get it for the ROM I ported. Who else worked on the cm10 ROM with you and Scott?
Sent from my jelly bean infused infuse

supernewbdev said:
I apologize, like I said this is my first port/ROM. If you could tell me who to give the proper credits to, I will put then in the OP. And thank you for the information about project butter
Sent from my jelly bean infused infuse
Click to expand...
Click to collapse
Great Job in getting the Port on it's feet!
edit: Apologize for upsetting those that didn't understand me, or for me not being clear...

I wouldn't mind helping test out at all, send me a PM or just tell me what's up in a post on here.
-U.S Army 18x-