Database Info

[KERNEL] 2.6.32.15-g3a8614e [email protected] #7

Why nobody has made this up yet is beyond me. I tried searching and it doesn't seem anyone has released the new HTC kernel by itself, only packaged in a ROM.
So here you all go.
A couple points of interest: (READ EVERYTHING)
This will overwrite your /system/build.prop as some values have changed for the new kernel. I am too lazy right now to write a script to only make the needed changes.
If you have tweaked your density, it will be reverted to stock.
Your ROM version will also show as "Mixed 2.6.32.15" in settings / about / software.
If you flash anything after this that modifies /system/build.prop, and is not designed specifically for this kernel, best of luck to you.
In keeping with my current practices, flashing this (except maybe in strange cases) will NOT require you to wipe *anything*, including caches.
This should be compatible with most any ROM. Right now it is only confirmed working on VaelPak 2.1.
Cheers!
As always, I am not responsible if this blows up your device. It is happily running on mine.
Download

vaelek said:
Why nobody has made this up yet is beyond me. I tried searching and it doesn't seem anyone has released the new HTC kernel by itself, only packaged in a ROM.
So here you all go.
A couple points of interest: READ THIS
This will overwrite your /system/build.prop as some values have changed for the new kernel. I am too lazy right now to write a script to only make the needed changes. If you have tweaked your density, it will be reverted to stock. Your ROM version will also show as "Mixed 2.6.32.15" in settings / about / software.
In keeping with my current practices, flashing this (except maybe in strange cases) will NOT require you to wipe *anything*, including caches.
This should be compatible with most any ROM. Right now it is only confirmed working on VaelPak 2.1.
Cheers!
As always, I am not responsible if this blows up your device. It is happily running on mine.
Download
Click to expand...
Click to collapse
THANK YOU!!! Been looking everywhere. This kernel is gold man cant wait for the source, then itll b christmas again lol
Sent from my PC36100 using Tapatalk

Thanks. I was wondering the same thing why I have not seen this.

this does not include Fps unlock yet right?
the couple points of interest link doesnt work

Success100 said:
this does not include Fps unlock yet right?
the couple points of interest link doesnt work
Click to expand...
Click to collapse
no FPS unlock correct.
It's not a link lol it's just underlined. Maybe I should change that. The points of interest are under it

My phone hung on the boot screen. I'm on Baked Snack 1.75. Is there any chance you could repackage this with Koush's kernal updater?
Edit: I'm giving it a shot. I'll post if it works. (fingers-crossed)

vaelek said:
no FPS unlock correct.
It's not a link lol it's just underlined. Maybe I should change that. The points of interest are under it
Click to expand...
Click to collapse
lol that was def a blond moment for me. ****, i feel retarded lol

Not sure what all the hype is with this Kernel. Personally it gives me terrible battery life.

I repacked the kernel in Koush's tool but it still isn't getting past the splash screen on BS 1.75. I'm puzzled.

Sabres420 said:
Not sure what all the hype is with this Kernel. Personally it gives me terrible battery life.
Click to expand...
Click to collapse
I don't see how my phone has been up for 14 hours last it was plugged in was at 11:30 am central time and I've used the hell out of it for 4hrs 30 mins and battery is at 53% its 4:30 pm central time. This HTC kernel is better than any other HTC kernel made for the evo.
I unchecked enable on always mobile data and turned roaming of to just Sprint towers lowered screen light a little bit unabled haptic feedback on keyboard and rom and also added the undervolt.ko to the rom I found on this website some where in the evo development section. Also using autokiller app and no set CPU or overclock widget.

Flashed on top of virus rom stuck on splash as well

SantaClause88 said:
Flashed on top of virus rom stuck on splash as well
Click to expand...
Click to collapse
Got back to your nand backup, I ALWAYS wipe the dalvik cache and cache when flashing a new kernel. Try that.

Tried this as well no go as of now

I think this is why no one has posted up a flashable kernel with this kernel cause I've tried this kernel on a 3.2.6 Rom back when this kernel was first available and it was a no go.

xxbabiboi228xx said:
I don't see how my phone has been up for 14 hours last it was plugged in was at 11:30 am central time and I've used the hell out of it for 4hrs 30 mins and battery is at 53% its 4:30 pm central time. This HTC kernel is better than any other HTC kernel made for the evo.
I unchecked enable on always mobile data and turned roaming of to just Sprint towers lowered screen light a little bit unabled haptic feedback on keyboard and rom and also added the undervolt.ko to the rom I found on this website some where in the evo development section. Also using autokiller app and no set CPU or overclock widget.
Click to expand...
Click to collapse
We got the same set up! Lol
Sent from my PC36100 using Tapatalk

SantaClause88 said:
Flashed on top of virus rom stuck on splash as well
Click to expand...
Click to collapse
I think virus sense based rom already haa the new kernel if im nit mistaken.. cause thats my rom of choice to run daily along w calks rom..
Sent from my PC36100 using Tapatalk

Thanks a lot. Honestly, I really hate ROMs. I much prefer being able to essentially build and customize myself without someone else's customizations. Update.zips are the best.

yeah I think this needs the 3.28.651.1 framework

Would you guys want a update.zip with just the kernel and framework? Or just the framework? I figured most roms would be using it by now (the framework at least)
Also, caches can be wiped in the update script, which I do. Before and after the flash for good measure. Cache, boot cache, and dalvik.
Sent from my PC36100 using XDA App

luckylui said:
I think virus sense based rom already haa the new kernel if im nit mistaken.. cause thats my rom of choice to run daily along w calks rom..
Sent from my PC36100 using Tapatalk
Click to expand...
Click to collapse
I am running Virus rom sense 1.0 with this exact kernel. It works fine for me.
View attachment 401237

G2x running stock froyo, Trinity kernal, and pimp my CPU BT toggle turns phone off?

My phone is running great but I can't turn off my Bluetooth and I don't want it eating battery for no reason. Whenever I attempt to turn it off it shuts my phone off instead (whether I do it through a widget or settings) If anyone has experiences this issue please help me out. Thank you guys.

jstrayy said:
My phone is running great but I can't turn off my Bluetooth and I don't want it eating battery for no reason. Whenever I attempt to turn it off it shuts my phone off instead (whether I do it through a widget or settings) If anyone has experiences this issue please help me out. Thank you guys.
Click to expand...
Click to collapse
refresh rom.. (wipe, flash again)
(wrong thread)

avetny said:
refresh rom.. (wipe, flash again)
(wrong thread)
Click to expand...
Click to collapse
I asked here because here is where everyone is flashing new roms and kernals but yea I guess I'll try wiping just didn't want to go through all of that again. Thank you though

jstrayy said:
I asked here because here is where everyone is flashing new roms and kernals but yea I guess I'll try wiping just didn't want to go through all of that again. Thank you though
Click to expand...
Click to collapse
This isnt the right section.... Read the rules
And stock rom as in? Try flashing eb 1.04... also make sure u have the right kernel.... You might have downloaded a gb kernel by mistake
Sent from my LG-P999 using XDA Premium App

Which Trinity kernel are you using? Right now there aren't any listed for stock ROM.
Also as has already been said this should be in a different section.

If he really flashed trinity on a stock rom and that's the only problem then someone should let Morfic know, maybe we can finally get a stock OC kernal, I've been waiting for one since I got the phone.

rooflessatrium said:
If he really flashed trinity on a stock rom and that's the only problem then someone should let Morfic know, maybe we can finally get a stock OC kernal, I've been waiting for one since I got the phone.
Click to expand...
Click to collapse
Yea I did, and the bluetooth issue comes about AFTER overclocking with pimpmycpu. I tried uninstalling but the problem doesn't go away so I went back to stock with Paul's Patch and everything is fine. Kinda sucks because my phone was real fast. Also when Paul's Patch and Trinity are applied together I wasn't getting sound at boot animation and I'm OCD so it did bother me lol
and if you guys are wondering I flashed the 2 following trinity versions: (without paul's patch and still got the bluetooth issue)
Trinity15 G2x - EB1.04 Froyo - EXT4 - Vibrator works, usb mounting might not
Trinity15 G2x - EB104F - EXT4 - vibrator works (new 5/16/2011), possibly usb mounting doesn't work
Usb mounting didn't work but all you need is a Multi-Mount SD card application and you're good.
UPDATE: Just redid my phone to complete stock and it seems that the bluetooth issue is still there, I think I found exactly where it's coming from and has nothing to do with the kernal or the patch. the issue comes up only after I restored my application data and apks with my backup pro so I'm guessing something is corrupt "/

mods...please move this thread
and when someone posts in the wrong section,can we refrain from answering please? all it does is create more clutter.

Thread Moved.

Mr. Clown said:
Thread Moved.
Click to expand...
Click to collapse
Thanks and sorry about that, new to the forum.
Sent from my LG-P999 using XDA Premium App

[ROM] [NIGHTLY] CM7 on the G2x. *Take 2*

Important!
It is strongly recommended that you flash clockwork recovery via NVFlash. If for some reason this or a future nightly build causes your phone to not boot up, you will not be able to boot into recovery unless you have it flashed via NVFlash.
NVFlash for Linux
NVFlash for Windows
To clear up some confusion, if you flashed your recovery via ROM Manager, you didn't actually flash a recovery. It is what we call a fakeflash, you should still probably flash with NVFlash.
Instructions
Download from http://download.cyanogenmod.com/?device=p999 and flash like you would any other ROM (via recovery or ROM Manager).
Be sure to backup before flashing, and of course a wipe is necessary when coming from stock.
Gapps are available from the usual places, however do not download the version that says it is for Tegra, even though this is a tegra device, as it will not flash.
Mod Edit:
Mikey1022 said:
Google Addon: http://goo-inside.me/google-apps/
Check the lastest package available on top
Click to expand...
Click to collapse
ChrisSoyars Edit:
After skimming some of the posts in this thread, here are some things that you can expect.
What to expect
- Everything working including Wifi, GPS, Audio, Camera, Front Facing Camera
- Screen off animation is not enabled, therefore it isn't broken.
- Occasional audio problems (as far as I know they have not been fixed). If audio does not play just reboot.
- Automagical brightness weridness, this is controlled by the kernel and not userspace, even having it working is very hacky.

Any reference to the first thread you need too look up, it's linked here:
http://forum.xda-developers.com/showthread.php?t=1058131

Changelog:
http://cm-nightlies.appspot.com/?device=p999

Thanks!!! Flashing

Is the server still down? The latest I see is 2011-5-25.

gamefreakgcb said:
Is the server still down? The latest I see is 2011-5-25.
Click to expand...
Click to collapse
I don't know whether it is still down or not, but yeah, that's still the latest build

Hrmm awesome, what about the battery stats? Anyone know if that has been fixed?
G2X & Nexus S

brian6685 said:
Hrmm awesome, what about the battery stats? Anyone know if that has been fixed?
G2X & Nexus S
Click to expand...
Click to collapse
Not on cm7 but Faux has made good progress with the help of debauchedsloth

So does this mean nightlies will resume soon?

edit, nvm oops
G2x with faux AOSP and faux orange kernel. [email protected] 5107 quadrant.

For anybody interested this is a build I just compiled about an hour ago
http://www.multiupload.com/6WEZDZMGSX

WHy a new thread? what is new?

aim1126 said:
For anybody interested this is a build I just compiled about an hour ago
http://www.multiupload.com/6WEZDZMGSX
Click to expand...
Click to collapse
How is your compile different from the gigglebread one from this morning?

jawknee530 said:
How is your compile different from the gigglebread one from this morning?
Click to expand...
Click to collapse
I dot think there's any really maybe one or two commits that got merged throughout the day. I just like compiling my own builds
Sent from my LG-P999 using XDA App

I see this thread kinda senseless as there isn't a newer nightly that was available before using the old thread. Although 2 pages seems more manageable then 300+ (which will happen eventually to this thread.)
Being a website developer I know these threads add up pretty quickly (hurray xda!)
I haven't flashed an actual CM rom in almost a week since the server crash. Hopefully the new thread is a sign that the server was repaired and new nightlies are on the way. Using the latest KANGS to get my fix, I know there is lots of progress. Running the latest KANG from today I think the rom is almost ready for a stable release after a few bugs get worked out.
I think the work you guys are doing is fantastic and much appriciated, although it may seem all we do is ***** half the time. Android wouldn't be the same without all of the developers leading the way. Big props. Hope all is well and I plan to continue to follow your work.

aim1126 said:
For anybody interested this is a build I just compiled about an hour ago
http://www.multiupload.com/6WEZDZMGSX
Click to expand...
Click to collapse
Just installed, cheers!
And thanks CM, I'm coming from #34 and just five minutes in its obvious there's been quite a bit of work done. Status Bar brightness slider is sweet.

i see a build 36 but it won't let me download? says its not found...

shniggies said:
i see a build 36 but it won't let me download? says its not found...
Click to expand...
Click to collapse
Probably still being built. Give it some time and check again.
Sounds like buildbot may be back up... this would be nice. <3

reisaru said:
Probably still being built. Give it some time and check again.
Sounds like buildbot may be back up... this would be nice. <3
Click to expand...
Click to collapse
ho ho... i must have checked riiiiiiight when it was uploading... because its downloading now

How did you find build 36 when 35 isn't out yet?
Sent from my LG-P999 using XDA App

Phone randomly rebooting.

This has probably been posted before but im in a hurry and i can't go looking through threads.
My Galaxy randomly reboots, ill be sitting playing ps3 and i see it reboots itself. My friend says its a problem with my kernel, but if it is. How would i fix that? I only know how to flash roms and thats bout it.

Do you have an sgs4g t959v? What rom r u on? Kernel?
-sent from my POS i897
no camera, no power button but at least I got miui lol

erikmm said:
Do you have an sgs4g t959v? What rom r u on? Kernel?
-sent from my POS i897
no camera, no power button but at least I got miui lol
Click to expand...
Click to collapse
Yes, Raver's unnamed rom, and not sure bout Kernel.

Backfire1337 said:
Yes, Raver's unnamed rom, and not sure bout Kernel.
Click to expand...
Click to collapse
Check under settings > about phone and where it says kernel but I'm sure ur on the roms kernel so just try flashing Anton's kernel its on dev thread and you flash it like u would a rom
-sent from my POS i897
no camera, no power button but at least I got miui lol

erikmm said:
Check under settings > about phone and where it says kernel but I'm sure ur on the roms kernel so just try flashing Anton's kernel its on dev thread and you flash it like u would a rom
-sent from my POS i897
no camera, no power button but at least I got miui lol
Click to expand...
Click to collapse
Ok Thanks

Backfire1337 said:
Ok Thanks
Click to expand...
Click to collapse
I had the same problem. My phone would reboot once a day, at least. Usually, when I was asleep. I was using Val-Final. Since flashing AntonX's OC/UV kernel, I haven't had a single reboot.

hate to dredge up an aging topic, but my wife's t959v has started exhibiting undesirable behavior including momentary freezes while in use and random rebooting. it's running gingerbread kj6 rooted (from lumin30's guide here) with the following details:
firmware 2.3.6
baseband t959vuvkj6
kernel 2.6.35.7-t959vuvkj6-cl694130
build gingerbread.vuvkj6
now i'm infinitely more comfortable flashing kernels and the like with my htc sensation, mostly due to the fact that i don't need to mess around with kies/odin/heimdall. is that AntonX kernel fairly universally seen as a reboot fix? usually i'd dive in and just flash it, but last i heard, cwm restores don't work on the t959v, so i'm a bit wary.
thanks in advance all

zero01101 said:
is that AntonX kernel fairly universally seen as a reboot fix? usually i'd dive in and just flash it, but last i heard, cwm restores don't work on the t959v, so i'm a bit wary.
thanks in advance all
Click to expand...
Click to collapse
The CWM issue was fixed when bhundven started with CWM 5. It's the older version that had an issue. The newer version is in Bryan's & AntonX's kernels and should not be an issue as far as I know.
Flashing Anton's kernel will fix the random reboot issue assuming you're using one of the kernels that exhibited that behavior vs. something else going wrong with the phone. There's a link to it in my signature if you choose to use it.
Good luck

stephen_w said:
The CWM issue was fixed when bhundven started with CWM 5. It's the older version that had an issue. The newer version is in Bryan's & AntonX's kernels and should not be an issue as far as I know.
Flashing Anton's kernel will fix the random reboot issue assuming you're using one of the kernels that exhibited that behavior vs. something else going wrong with the phone. There's a link to it in my signature if you choose to use it.
Good luck
Click to expand...
Click to collapse
awesome, great to hear about the newer CWM at the very least we've got two identical t959v phones (mine isn't rebooting randomly, but also isn't a daily use phone, natch) so i'll flash the new nifties on my "disposable" first. thanks much for your help!

No worries. Let me know how it goes or if you need any help.

zero01101 said:
now i'm infinitely more comfortable flashing kernels and the like with my htc sensation, mostly due to the fact that i don't need to mess around with kies/odin/heimdall.
Click to expand...
Click to collapse
You can always use the SGS Kernel Flasher from Google Play to flash kernels on our phone as long as you're already rooted. No need to worry about Odin or Heimdall.

[ROM] Manual/working port of PARANOID ANDROID 1.97a

UPDATE: After a few additional tweaks to the framework, this rom appears to be working for both green and red lens defy users. I've personally used it as my daily driver for several days this week, and found it to be stable and very usable. The one thing that does not work for me is the GPS, and quite honestly, I haven't had time to look in to it.
Here is a complete, working port of PARANOID ANDROID 1.97a for Defy. It is based on Galaxy S2 PARANOID 1.97 and Epsylon's CM10 1208. This is NOT a simple port using the port tool and includes the Framework changes necessary for the hardware.
I take no responsibility for any consequences from your decision to try this rom, and being based on alpha releases, I'm sure there are other problems, but I've personally used this rom for a prolonged period of time and the only problem I've had was with the GPS not locking.
Few things to note:
1. No offense to anyone, but this thread is not for complete noobs. While I will try to help when I can, I cannot promise any level of support. If you don't know how to flash via CWM, this is not for you.
2. This rom is based on the Froyo kernel and has been confirmed to work on MB525 with green as well as red lens. This is no guarantee that it will work on YOUR phone.
3. I intentionally used 1.97 as that version was very stable on my Galaxy Nexus - much moreso than 1.98 or 1.99
4. I've cleared the PARANOID defaults that most of the other PA roms come with. You can manually change the individual app settings under Paranoid Settings, or via the \system\etc\paranoid\properties.conf file which stores a record for every app including DPI and Layout.
5. After installing this rom, I "supercharged" it using a v6supercharger script (link below) and it did seem to help make the rom smoother and more responsive.
Special thanks to Epsylon3 and Quarx for their work on CM10 for the Defy, and Molesarecoming and D4rKn3sSyS for their work on PARANOID.
Thanks to brajesh.sharma87 for pointing out the bootloop "gottcha" of simply recompiling the framework (for specifics google "framework recompile bootloop" and read the first thread that comes up).
I strongly encourage any/all of you to contribute (make donations) to these developers.
DOWNLOAD ROM (double check MD5 before flashing - 96D409B4692319D9DA63FAA9CE1516A6)
Download latest gapps from here.
Here is the v6 supercharger script that I've been using and is confirmed to work with this rom.​
Make sure you're on Froyo kernel. Boot in to CWM recovery. Factory reset, wipe data/cache/dalvik. Install rom, followed by gapps. Wipe data/cache/dalvik again. Reboot (should take about 2-5 minutes). Install and configure the v6 script. Enjoy!

Looks pretty neat man! I might give it a shot soon. Any known bugs for now?

This is only PA rom which I manage to get work on my red lens defy without bootloop..
Cheer mate..:good:
now testing..

hm md5 matches, flashed it several times but it cant pass bootanimation :/
(edit: green lense defy)

here tooo stuck at endless bootanim...

o-liver said:
hm md5 matches, flashed it several times but it cant pass bootanimation :/
(edit: green lense defy)
Click to expand...
Click to collapse
meilbox said:
here tooo stuck at endless bootanim...
Click to expand...
Click to collapse
Are you guys running Froyo kernels? Did you do a full wipe of data, cache, and dalvik after the install?
Trying flashing the CM7 kernel, this rom, wiping, and booting right away before you install gapps or anything else. And make sure you give it a full 5 minutes as the first boot can take some time.
Also keep an eye on the led by the proximity sensor. Let me know if it flashes red when it loops.

dew.man said:
Are you guys running Froyo kernels? Did you do a full wipe of data, cache, and dalvik after the install?
Trying flashing the CM7 kernel, this rom, wiping, and booting right away before you install gapps or anything else. And make sure you give it a full 5 minutes as the first boot can take some time.
Also keep an eye on the led by the proximity sensor. Let me know if it flashes red when it loops.
Click to expand...
Click to collapse
bro if kernel was wrong they would have stuck at Moto logo not bootanim...
same with my builds too and the reason y i did not update my thread...
I made paranoid too but never boot... libandroid.runtime has errors as per logs...
and m in no mod to fix it for now...
Sent from my MB526 using xda premium

dew.man said:
Are you guys running Froyo kernels? Did you do a full wipe of data, cache, and dalvik after the install?
Trying flashing the CM7 kernel, this rom, wiping, and booting right away before you install gapps or anything else. And make sure you give it a full 5 minutes as the first boot can take some time.
Also keep an eye on the led by the proximity sensor. Let me know if it flashes red when it loops.
Click to expand...
Click to collapse
did everything what i could, and my led does not flash in red...

nogoodusername said:
bro if kernel was wrong they would have stuck at Moto logo not bootanim...
Click to expand...
Click to collapse
good point.
nogoodusername said:
same with my builds too and the reason y i did not update my thread...
I made paranoid too but never boot... libandroid.runtime has errors as per logs...
and m in no mod to fix it for now...
Click to expand...
Click to collapse
Sorry, didn't even see your thread. Quite honestly, I've only been playing with PA for the last couple of weeks and have posted in rajesh.sharma87 thread as well as the rom porter thread, but nobody over there seems to want to read.
Have you looked at the logs from the devices that loop? Send me one if you have an example. I've tried lots of different combinations in conjunction with the framework-res mods before I got this to boot, but have not had any problems with this version. Interesting...

dew.man said:
good point.
Sorry, didn't even see your thread. Quite honestly, I've only been playing with PA for the last couple of weeks and have posted in rajesh.sharma87 thread as well as the rom porter thread, but nobody over there seems to want to read.
Have you looked at the logs from the devices that loop? Send me one if you have an example. I've tried lots of different combinations in conjunction with the framework-res mods before I got this to boot, but have not had any problems with this version. Interesting...
Click to expand...
Click to collapse
well paranoid jb(gb kernel) no boot for me at all...
havent tried urs m on gb kernel...
i dont have logs m on cm10
i m thinking of setting up git for paranoid... but my internet...:thumbdown:
Sent from my MB526 using xda premium

nogoodusername said:
well paranoid jb(gb kernel) no boot for me at all...
havent tried urs m on gb kernel...
i dont have logs m on cm10
i m thinking of setting up git for paranoid... but my internet...:thumbdown:
Sent from my MB526 using xda premium
Click to expand...
Click to collapse
If you're on Defy red lens, I'd be curious to have you try this rom. I'm starting to think it may be a difference in the hardware.
I'm on BL6 (flashed GB when first leaked), but have been going back and forth between GB and Froyo kernel roms and found Epsy's to be most stable for my device (which is why I used his as the base).

dew.man said:
If you're on Defy red lens, I'd be curious to have you try this rom. I'm starting to think it may be a difference in the hardware.
I'm on BL7 (flashed GB when first leaked), but have been going back and forth between GB and Froyo kernel roms and found Epsy's to be most stable for my device (which is why I used his as the base).
Click to expand...
Click to collapse
How can you be on BL7 and still be able to switch to Froyo kernel?

niksy+ said:
How can you be on BL7 and still be able to switch to Froyo kernel?
Click to expand...
Click to collapse
My bad - it's BL6.
And for those that don't know, there was a leaked Froyo SBF with BL7 (see here).

dew.man said:
If you're on Defy red lens, I'd be curious to have you try this rom. I'm starting to think it may be a difference in the hardware.
I'm on BL6 (flashed GB when first leaked), but have been going back and forth between GB and Froyo kernel roms and found Epsy's to be most stable for my device (which is why I used his as the base).
Click to expand...
Click to collapse
no the kernel has difference...
gb kernel has many missing libs!
Sent from my MB526 using xda premium

Hi dew.man, if u want to continue this, I will close my thread as u know there's no need of having multiple threads for the same work. The intention of the guide and the tool was to let everyone port and use and not polluting the developement thread by posting so many threads. I hope u get my point. If u really wish to take this up I am there with u and will provide u as much help as I can but at the same time we need to respect xda.
Opinion of other users are also welcome so that we can keep the developement thread clean. I've already closed 2 of my threads for the same reason. LewaOS and AOKP JB.
Sent from my MB525 using xda app-developers app

cant acquire logcat, its waiting for the device :/

o-liver said:
cant acquire logcat, its waiting for the device :/
Click to expand...
Click to collapse
dude goto bootmenu-boot-adb enable
press 2nd-init
and logcat...
Sent from my MB526 using xda premium

brajesh.sharma87 said:
Hi dew.man, if u want to continue this, I will close my thread as u know there's no need of having multiple threads for the same work. The intention of the guide and the tool was to let everyone port and use and not polluting the developement thread by posting so many threads. I hope u get my point. If u really wish to take this up I am there with u and will provide u as much help as I can but at the same time we need to respect xda.
Opinion of other users are also welcome so that we can keep the developement thread clean. I've already closed 2 of my threads for the same reason. LewaOS and AOKP JB.
Sent from my MB525 using xda app-developers app
Click to expand...
Click to collapse
First and foremost, thanks for all your help
Perhaps I was not clear enough, but I do not have the free time to take on any kind of support role. Please understand that my sole intention of this thread, was to provide/share a more recent version of PA/CM10 that I have been unable to obtain from anybody else. No offense intended, but I did ask you on several occasions to post a more recent version than the 1.95 you have in your (still existent) thread, and the only response I received was that you didn't have the bandwidth.
I also tried to work through/with kadevil's thread, but he pretty much ignored all the feedback he was getting about the tool not working for PA and JB.
Again, I was looking for a more recent version of PA (1.97+) with a more recent CM10 (8/06+) and was unable to find a working version. I built one that works for me, and wanted to share with anybody else that may be in a similar position...

Well guys i feel that the thread should be merged to brajesh's thread... since his thread has more organized 1st post...
no offence to op but thats wat i felt when i saw it...
peace
-hackergnome
Sent from my MB526 using xda premium

nogoodusername said:
Well guys i feel that the thread should be merged to brajesh's thread... since his thread has more organized 1st post...
no offence to op but thats wat i felt when i saw it...
peace
-hackergnome
Sent from my MB526 using xda premium
Click to expand...
Click to collapse
I'm perfectly fine with that as long as the op/title gets updated with the new version number