Database Info

G2x running stock froyo, Trinity kernal, and pimp my CPU BT toggle turns phone off?

My phone is running great but I can't turn off my Bluetooth and I don't want it eating battery for no reason. Whenever I attempt to turn it off it shuts my phone off instead (whether I do it through a widget or settings) If anyone has experiences this issue please help me out. Thank you guys.

jstrayy said:
My phone is running great but I can't turn off my Bluetooth and I don't want it eating battery for no reason. Whenever I attempt to turn it off it shuts my phone off instead (whether I do it through a widget or settings) If anyone has experiences this issue please help me out. Thank you guys.
Click to expand...
Click to collapse
refresh rom.. (wipe, flash again)
(wrong thread)

avetny said:
refresh rom.. (wipe, flash again)
(wrong thread)
Click to expand...
Click to collapse
I asked here because here is where everyone is flashing new roms and kernals but yea I guess I'll try wiping just didn't want to go through all of that again. Thank you though

jstrayy said:
I asked here because here is where everyone is flashing new roms and kernals but yea I guess I'll try wiping just didn't want to go through all of that again. Thank you though
Click to expand...
Click to collapse
This isnt the right section.... Read the rules
And stock rom as in? Try flashing eb 1.04... also make sure u have the right kernel.... You might have downloaded a gb kernel by mistake
Sent from my LG-P999 using XDA Premium App

Which Trinity kernel are you using? Right now there aren't any listed for stock ROM.
Also as has already been said this should be in a different section.

If he really flashed trinity on a stock rom and that's the only problem then someone should let Morfic know, maybe we can finally get a stock OC kernal, I've been waiting for one since I got the phone.

rooflessatrium said:
If he really flashed trinity on a stock rom and that's the only problem then someone should let Morfic know, maybe we can finally get a stock OC kernal, I've been waiting for one since I got the phone.
Click to expand...
Click to collapse
Yea I did, and the bluetooth issue comes about AFTER overclocking with pimpmycpu. I tried uninstalling but the problem doesn't go away so I went back to stock with Paul's Patch and everything is fine. Kinda sucks because my phone was real fast. Also when Paul's Patch and Trinity are applied together I wasn't getting sound at boot animation and I'm OCD so it did bother me lol
and if you guys are wondering I flashed the 2 following trinity versions: (without paul's patch and still got the bluetooth issue)
Trinity15 G2x - EB1.04 Froyo - EXT4 - Vibrator works, usb mounting might not
Trinity15 G2x - EB104F - EXT4 - vibrator works (new 5/16/2011), possibly usb mounting doesn't work
Usb mounting didn't work but all you need is a Multi-Mount SD card application and you're good.
UPDATE: Just redid my phone to complete stock and it seems that the bluetooth issue is still there, I think I found exactly where it's coming from and has nothing to do with the kernal or the patch. the issue comes up only after I restored my application data and apks with my backup pro so I'm guessing something is corrupt "/

mods...please move this thread
and when someone posts in the wrong section,can we refrain from answering please? all it does is create more clutter.

Thread Moved.

Mr. Clown said:
Thread Moved.
Click to expand...
Click to collapse
Thanks and sorry about that, new to the forum.
Sent from my LG-P999 using XDA Premium App

[Q&A] [ROM] LinuxBozo's Galaxy ROM Hellraiser

Welcome to a new and sick, twisted world
Ever wish you could take one of those nice shiny GalaxyS (i9000) ROMs and flash it to your lovely Infuse? Well now you CAN! Yes, I say GO AHEAD and flash away. With LinuxBozo's magic Hellraiser, you can raise a little hell with any JVQ based i9000 ROM on your Infuse.
How's it work?
Select any JVQ based ROM for the i9000. If you don't know what this is, then this is not for you.
Push your selected ROM to your /sdcard
Download Hellraiser below
Push Hellraiser to your /sdcard
Reboot into Recovery (RED RECOVERY PREFERRED)
Wipe Data/Factory Reset
Flash your chosen JVQ ROM
Flash Hellraiser immediately after
Reboot and enjoy your JVQ ROM goodness
PLEASE NOTE: I am not responsible if something goes wrong. Seriously. If you don't flash Hellraiser correctly, you can be left with a phone that needs to be returned to stock with Odin or Heimdall. If you don't know how to do this, this is not for you.
FAQ:
Do I need to disable Voodoo Lagfix?
Nope.
Can I flash JVO/JVR/JVP ROMs as well?
You should be able to, but I only tested with JVQ. So you are on your own there.
Can I flash i9000 Kernels with this?
NO
Can I flash other Infuse Kernels, like Infusion to get OC/UV?
YES. Neat, huh?
Can I flash i9000 CM7 or MIUI with this?
NO. This will only work with Samsung based ROMs
Can I flash Samsung based Captivate ROMs as well?
Has been successfully done by at least one person. Make sure you use a Samsung based Gingerbread ROM.
Which ROM do you recommend?
Which one you choose really is a matter of preference. However, I tested with Sensation from Crysis21: http://is.gd/D5LJm6
How does this work behind the scenes? How is this even possible?
What Hellraiser does is flash in appropriate hardware libraries and userspace applications, and the Infuse specific modem (UCKE3) and kernel. This allows the existing i9000 ROM to work on the Infuse all while still thinking it's an i9000, but addressing the Infuse hardware.
Click to expand...
Click to collapse
Have questions that aren't technical about Hellraiser? Ask em here.

LinuxBozo said:
Have questions that aren't technical about Hellraiser? Ask em here.
Click to expand...
Click to collapse
What is Hellraiser? Any links?
I figure it allows you to put i9000 roms on it, but only certain kinds?
Does this allow me to put a fully functional GB rom on my Infuse? If so, how's this different than your work with porting over CM7?

Nice to see another dev is using a Q&A thread. stickied.

Hey man, Great Work!
I was wondering, does HellRaiser works with 100% of the Infuse's hardware?
I'm asking because I am aware you've been fixing the Bluetooth/GPS modules to bring that functionality to CM7.
So, is hellraiser a 100% hardware thing or does it have the same issues with bluetooth and voodoo sound driver than the unofficial CM7?
Thanks in advance and apologies if this question has been addressed somewhere else.
-DarkJZ

Hellraiser
Hi, Have you taken the link down, I clicked it a few times but it says the address cannot be found on media fire.
Thanks

vicn77 said:
What is Hellraiser? Any links?
I figure it allows you to put i9000 roms on it, but only certain kinds?
Does this allow me to put a fully functional GB rom on my Infuse? If so, how's this different than your work with porting over CM7?
Click to expand...
Click to collapse
There's more detail in development. Read there, ask here.
Define "fully functional"? With the exception of HDMI and data speed issues in some areas, ROMs derived from the Rogers Gingerbread release were fully functional.
Since the low-level video/audio/etc stuff from Hellraiser is derived from that same ROM, the same limitations apply.
But it lets you take any i9000 ROM based on the Samsung Gingerbread release (tested with an XXJVQ-based ROM) and use it on the Infuse.
It will NOT work for getting anything CM7-based from the i9000 to work. CM7 has a very different low-level architecture than Samsung ROMs (which is, for example, why Bluetooth still isn't working in CM7 on the Infuse.)
I'm sure LB will still be working CM7, but every once in a while you need to take a break and do something else. LB, gtg, and Mikey have been working this off and on for a few weeks. CM7 was getting more focus, but there's only so much bashing your head against the CG2900 driver that a man can take before you go do something else for a bit. Hellraiser is the result of LB taking a break from Bluetooth.

It works AMAZING. It opens up a world of i9000 and Captivate roms for us to flash.
So far Blockbuster, Mosaic, and Darky's worked perfect.

Hellraiser
would somebody mind posting the full mediafire link for hellraiser please ... for some reason the is.gd link isn't working for me. Ty.

darkjz said:
Hey man, Great Work!
I was wondering, does HellRaiser works with 100% of the Infuse's hardware?
-DarkJZ
Click to expand...
Click to collapse
Yes. It's quite a bit easier to go from Samsung ROM to Samsung ROM than it is switching over to something that's completely open source like CM7. Samsung uses many closed source drivers, which we can drop into other Samsung ROMs based around the original GalaxyS platform, like the i9000 and the Captivate.

Thanks
LinuxBozo said:
Yes. It's quite a bit easier to go from Samsung ROM to Samsung ROM than it is switching over to something that's completely open source like CM7. Samsung uses many closed source drivers, which we can drop into other Samsung ROMs based around the original GalaxyS platform, like the i9000 and the Captivate.
Click to expand...
Click to collapse
Makes sense... Thank you for your quick reply and development man! You and your team gives excellent value add to our phones!

Would love to hear feedback from people on why they like the ROM they have chosen.
Right now Infused 2.0.2 has been my ROM of choice because it's fast and I can't find a single thing wrong with it but if there's a compelling reason to check out some of the i9000 ROMs I might do so!
Also kudos to LB this is a really clever idea

Kernodle said:
Would love to hear feedback from people on why they like the ROM they have chosen.
Right now Infused 2.0.2 has been my ROM of choice because it's fast and I can't find a single thing wrong with it but if there's a compelling reason to check out some of the i9000 ROMs I might do so!
Also kudos to LB this is a really clever idea
Click to expand...
Click to collapse
I am running the one LB was running, Sensation. I gotta say its soo much smoother than 2.0.x.... I was on 2.0.1 through 4... and they just didnt seem to be right.. gtg knows his stuff but until GB is official on our phones this is the next best thing right now. battery life is awesome also, been unplugged since 3am its 1pm now, with calls, bt, wifi im at 75%

Infused is one of the best roms that I've ever used, fast, great battery life. But, I had a Captivate before that. And just seeing those Cappy roms on our big screen is neat. Nothing life-changing, just neat. If you're a tinkerer and enjoy playing around with roms, this is a must.
Kernodle said:
Would love to hear feedback from people on why they like the ROM they have chosen.
Right now Infused 2.0.2 has been my ROM of choice because it's fast and I can't find a single thing wrong with it but if there's a compelling reason to check out some of the i9000 ROMs I might do so!
Also kudos to LB this is a really clever idea
Click to expand...
Click to collapse

If I do a backup of my current setup (Infused 2.0.2 and bedwa GB kernel) from ROM Manager will that give me a complete snapshot of the phone that I can return to if I don't like SensatioN + Hellraiser?

Kernodle said:
If I do a backup of my current setup (Infused 2.0.2 and bedwa GB kernel) from ROM Manager will that give me a complete snapshot of the phone that I can return to if I don't like SensatioN + Hellraiser?
Click to expand...
Click to collapse
I would say that yes, if you reboot into recovery manually, and took a backup directly in Red CWM it would. I wouldn't trust Rom Manager to do it for you.

I get this error
THE PROCESS ANDROID.PROCESS.ACORE HAS STOPPED UNEXPECTEDLY. PLEASE TRY AGAIN.
why is this poping up?
thanks ppl and if this has been aswered disregard my post and I will keep searching for the answer

Ltilt2 said:
I get this error
THE PROCESS ANDROID.PROCESS.ACORE HAS STOPPED UNEXPECTEDLY. PLEASE TRY AGAIN.
why is this poping up?
thanks ppl and if this has been aswered disregard my post and I will keep searching for the answer
Click to expand...
Click to collapse
Can't really help without more information, but, I would say, you forgot to Wipe Data.

LinuxBozo said:
Can't really help without more information, but, I would say, you forgot to Wipe Data.
Click to expand...
Click to collapse
nope, did not forget. flashed an i9100 rom, that's why. lol
I don't know how i manage to flash it and make it work. so I'm downloading the rom from the op.
Thanks for your help.

Sensation ROM + Hellraiser
Installed Sensation ROM + Hellraiser + Infusion GB. Power button menu does not have Reboot, Recovery, etc...only Silent, Data Network Mode, Flight Mode, and Power Off. Any ideas??

eric3781 said:
Installed Sensation ROM + Hellraiser + Infusion GB. Power button menu does not have Reboot, Recovery, etc...only Silent, Data Network Mode, Flight Mode, and Power Off. Any ideas??
Click to expand...
Click to collapse
They have to be enabled. Open Theme Settings app, Phone Options dialog at the bottom.

[Q] How to choose a ROM?

This is what I call a "high class problem". With so many ROMs to choose from, how does a noob like me decide. Aside from stability, we all probably have different wants and needs.
Can anyone who's checked out the majority of the available ROMs give the rest of us a rundown on the pros and cons of each ROM?
For myself, I'm looking for:
1. Basic
2. Reversible
3. No known issues with wifi, sms, battery drain, ciq, marketplace, etc.
Which one should I pic?

Budge72 said:
This is what I call a "high class problem". With so many ROMs to choose from, how does a noob like me decide. Aside from stability, we all probably have different wants and needs.
Can anyone who's checked out the majority of the available ROMs give the rest of us a rundown on the pros and cons of each ROM?
For myself, I'm looking for:
1. Basic
2. Reversible
3. No known issues with wifi, sms, battery drain, ciq, marketplace, etc.
Which one should I pic?
Click to expand...
Click to collapse
basically, you need to try them out and see for yourself.
the problem is, there will be another one up soon for you to try out

Like u said. To each his own. None of the roms here have major issues that I have flashed. All work and run well only issue is if there using da G's kernel which has Sod issues. Other than that flash away bruh.
Only u can prevent forest fires.....so choose well bruh. LOL
Sent from my SAMSUNG-SGH-I727 using xda premium

the2rrell said:
Like u said. To each his own. None of the roms here have major issues that I have flashed. All work and run well only issue is if there using da G's kernel which has Sod issues. Other than that flash away bruh.
Click to expand...
Click to collapse
Which ones don't use Da G's kernel? I've read about something called a "stock-ish" kernel.

Budge72 said:
Which ones don't use Da G's kernel? I've read about something called a "stock-ish" kernel.
Click to expand...
Click to collapse
you can change kernels easier than changing roms. even if a rom has his kernel, you can flash whatever kernel you like in place of it....

Pirateghost said:
you can change kernels easier than changing roms. even if a rom has his kernel, you can flash whatever kernel you like in place of it....
Click to expand...
Click to collapse
Other than doing a complete Nandroid backup, is there anyway to just backup your current kernel prior to flashing a new kernel? SGS KERNEL FLASHER doesn't work on the Skyrocket, and i'd like to backup my stock kernel in case I need to reflash it.
Sent from my SAMSUNG-SGH-I727 using XDA App

Pirateghost said:
you can change kernels easier than changing roms. even if a rom has his kernel, you can flash whatever kernel you like in place of it....
Click to expand...
Click to collapse
hey Pirateghost didn't you say you got one rom in beta that you are working on????? If yes when is beta coming out?

appdroid said:
hey Pirateghost didn't you say you got one rom in beta that you are working on????? If yes when is beta coming out?
Click to expand...
Click to collapse
its close. if i have time this weekend you will see something drop. i have a few more tweaks i want to do before i consider it ready. internally, im already up to beta8, lol. i hope to have beta10 release as an RC1 for everyone.

From what I seen so far I seen no reason to try them though somebody has to or they never get fully debugged.
Some of the ROMs are AT&T only ..... sorry got SGH-I727R
Some of them do have Rogers ROMs but I read of Sleep of Death and losing LTE connection..... sorry too buggy and I NEED LTE or I would of got the Galaxy Nexus.
Finally what I really want is ICS and NOT ICS themed ROMs
None of them are for me but I check everyday when a ICS ROM comes out I will try it.
Finally I recommend you NEVER try Roms if you are not sure that you can restore.
I have backuped my ROMs, Apps and Data, APNs I am 95% certain I can recover from anything.
For that other 5% I have Odin and the orginal Rogers ROM

Just to agree with everyone else, you've got to try them out. There's no harm in it as long as you've done your nandroid back up, you're pretty safe when it comes to reverting back to your previous ROM and settings.
Reading the features and change logs for each of them helps alot... but it still doesn't give you a full grasp of what it has to offer until you flash and test it.

[Q] NEED HELP - Infuse 4G not booting up after 1.8 kernel installed

I have a Samsung Infuse 4G, rooted, CWM installed and just flashed the OC/UV kernel (v1.8) and rebooted. My phone has been stuck on the Samsung screen for 15-20 min now. Any advise?

Hi there, if you are able to get into download mode then you shouldn't have a problem restoring your phone back to stock. Also I think you bricked your phone.
Try getting into download mode by pulling out the battery insert it. Then while holding down both the buttons on the volume rocker and insert your USB. Make sure kies is installed for the drivers.
Maybe try flashing another Kernel before going to the step below.
Also you may check back here to unbrick your phone:
http://forum.xda-developers.com/showthread.php?t=1116251
Source: I've had this happen to me, its no biggie.

Thanks Sarius24. I did brick it however I was able to load the ROM I installed last night. Now I'm doing a restore from a backup I took just before doing the kernel flash so hopefully it comes back up. It was strange b/c I tried doing just a restore first and it did not work. It still got stuck on the Samsung screen.

That's a froyo kernel and it's not the most recent one either. Also it's not actually 1.8 GHz it was an issue with clock reporting. The hummingbird is not capable of more than 1.6 GHz without bus overclocking which causes more issues and even at 1.6 you need profiles because running GPS and the 3g radio will cause too much heat (my phone used to crash running google navigation but with newer modems and GB it might not be an issue) . many can run 1.6 on wifi with good stability but it's all overrated anyway.
If you are on GB you need a GB kernel. If you are on froyo you need a froyo kernel. If you are on aosp (CM7/MIUI) the included kernel has overclocking.

Dani897 said:
That's a froyo kernel and it's not the most recent one either. Also it's not actually 1.8 GHz it was an issue with clock reporting. The hummingbird is not capable of more than 1.6 GHz without bus overclocking which causes more issues and even at 1.6 you need profiles because running GPS and the 3g radio will cause too much heat (my phone used to crash running google navigation but with newer modems and GB it might not be an issue) . many can run 1.6 on wifi with good stability but it's all overrated anyway.
If you are on GB you need a GB kernel. If you are on froyo you need a froyo kernel. If you are on aosp (CM7/MIUI) the included kernel has overclocking.
Click to expand...
Click to collapse
Thanks for the info Dani897. I'm using Numas vOne ROM and not sure if I'm actually on GB. I think I am. Here's the info -
Firmware version 2.3.6
Baseband version 1997UCKJ2
Kernel version 2.6.35.7-1997RUXKG3-CL366622
Is there a OC kernel for GB? I've not had any luck finding one. I've been searching the forums for a while.

Yes you are on GB ....2.2.xx=froyo, 2.3.xx =GB ..
Sent from my SAMSUNG-SGH-I997 using xda premium

So where can I get an OC kernel for GB? Do I even need a kernel? I tried using SetCPU (before flashing the 1.8 kernel) and it gave me errors when I tried to run it.

Type "Infusion gingerbread" into the search box in the Dev section. The one that says "search this thread," not the assisted google search on the top of the screen.
I'd give a link but it's annoying from my phone.

android_ace said:
So where can I get an OC kernel for GB? Do I even need a kernel? I tried using SetCPU (before flashing the 1.8 kernel) and it gave me errors when I tried to run it.
Click to expand...
Click to collapse
If you don't know any of this stuff you shouldn't be flashing!
Start searching, researching and read before attempting something you know nothing of.
YES you Need a kernel
YES you Need a modem
NO you don't Have to be OCed
YES the infuse can be OCed
YES you need compatible kernel to rom build match up I.e. GB to GB and Froyo to froyo not GB to froyo and vice versa.
Bid Dog Infuse I997 CatyRom

Added bignate78 to my ignore list!

Dani897 said:
Type "Infusion gingerbread" into the search box in the Dev section. The one that says "search this thread," not the assisted google search on the top of the screen.
I'd give a link but it's annoying from my phone.
Click to expand...
Click to collapse
Thanks Dani897. That did the trick. I actually looked at those kernels earlier but was not sure which one to use as there were 7 or 8 of them. I read the post again and grabbed the one I needed and flashed my phone. It is now OCed and SetCPU is working like a charm.
Thanks again!

android_ace said:
Added bignate78 to my ignore list!
Click to expand...
Click to collapse
Lol don't be mad at me for you not knowing what your doing before you do it!
Bid Dog Infuse I997 CatyRom

android_ace said:
Added bignate78 to my ignore list!
Click to expand...
Click to collapse
Can't handle someone speaking the truth huh?? He really is right. You didn't even know if you were on froyo or GB. Please read more. Yes Bignate came across as a rude ass but he's telling you the truth. People don't sugar coat crap around here.
Sent from my SPH-D710 using XDA App

Well I'm not looking for sugar coating but I don't put up with bull**** either. I'm just starting out with this so forgive me if I'm a bit ignorant. I honestly doubt if you or bignate or ANYONE on these forums knew everything there was to know about flashing ROMs or OCing 3 days after you got your first Android. Correct me if I'm wrong please. I doubt I am.
I've been on enough of these threads to know there is always someone out there that just replies to piss people off. bignate is one of them. I chose to ignore him and not pander to his ego.

I'm not saying anymore on this. The whole reason I blocked bignate is because I didn't want to get into some bull**** chest-beating contest with some wise-ass.
I got what I needed and that's what matters.

android_ace said:
I'm not saying anymore on this. The whole reason I blocked bignate is because I didn't want to get into some bull**** chest-beating contest with some wise-ass.
I got what I needed and that's what matters.
Click to expand...
Click to collapse
Well since you can't see what I post I'm still gonna reply in my defence.
For one I didn't try to flash anything on my first android which was a captivate, till I Researched my Ass off so I wouldn't brick or ruin my phone! I'm not trying to get into a chest beating contest but when you start asking if you even need a kernel just clearly shows you have no clue what your doing. Two ,almost every thread says so to read before attempting and also states which system its runs with or for .
But hey, whatever floats your boat kiddo
Bid Dog Infuse I997 CatyRom

Ignore him if you want but he's right....if you have no idea what your doing or if you need a kernel(really)than you need to read alot before you flash....this isn't child's play...you can really Jack your phone up if you don't know what your flashing or if you even need it....read
Sent from my SAMSUNG-SGH-I997 using xda premium

I don't even get how you can attempt this stuff WITHOUT reading extensively...
Sent from my SAMSUNG-SGH-I997 using XDA App

Some peoples kids. >facepalm<
Sent from my SPH-D710 using XDA App

[KERNEL][BML] BlastOff - v2.5 - Q&A Thread

I just posted the new BlastOff BML kernel here.
This is the place to ask questions.

Can we get an ETA on when this kernel will land on Mars?

FBis251 said:
Can we get an ETA on when this kernel will land on Mars?
Click to expand...
Click to collapse
Well, soon (no eta) it will land on an updated 'unnamed - bhundven edition' rom!

Not sure if its just me but wifi is showing up as error. I tried redownloading and fixing permissions problem still their.

read the op

WI FI calling isn't working, is it gong to work w/ ?this kernel
Sent from my SGH-T959V using xda premium

mcarbaja said:
WI FI calling isn't working, is it gong to work w/ ?this kernel
Sent from my SGH-T959V using xda premium
Click to expand...
Click to collapse
This kernel is for BML roms. Wifi calling works on those roms because they are stock based.

I'm new to this phone and not sure what bml is or what its used for and is this kernel for ics based roms

asj2583 said:
I'm new to this phone and not sure what bml is or what its used for and is this kernel for ics based roms
Click to expand...
Click to collapse
New to this phone or not. Search is the best feature on XDA.
If it's not BML, it's MTD. Search the Q&A forum for MTD. There you will find a thread by eollie which quotes the epicmtd thread and a post of mine... here it is:
http://forum.xda-developers.com/showthread.php?t=1699506
(yes, I have answered this question a billion times. Why, because no one searches.)
Edit: No, this will not work with MTD roms, like CM7, CM9, AOKP, SlimICS, etc... This will work with Valhalla, Valhalla Black, Unnamed, Stock UVKJ6 based roms.

bhundven said:
New to this phone or not. Search is the best feature on XDA.
If it's not BML, it's MTD. Search the Q&A forum for MTD. There you will find a thread by eollie which quotes the epicmtd thread and a post of mine... here it is:
http://forum.xda-developers.com/showthread.php?t=1699506
(yes, I have answered this question a billion times. Why, because no one searches.)
Edit: No, this will not work with MTD roms, like CM7, CM9, AOKP, SlimICS, etc... This will work with Valhalla, Valhalla Black, Unnamed, Stock UVKJ6 based roms.
Click to expand...
Click to collapse
Thank for the reply, anyway to make it work on non compadiable roms?
Edit: nevermind i read the info on the link you provided and it looks like ics isnt possible on bml

Belongs in Dev?
blazen2000 said:
Not sure if its just me but wifi is showing up as error. I tried redownloading and fixing permissions problem still their.
Click to expand...
Click to collapse
Yes read op.
I first want to than you for your support on a "update for a BML kernel".
i think it belongs in dev but still don't have enough posts to post.
I ran into a few issues with no log cat because of hardware freeze.
1st Tegrak will not load module for custom tweaks. Hardware failure vibrates indefinitely, and battery pull needed. works fine if you don't try and tweak. running 1.4 GHz without optimization works fine but can't underclock because of issue. the screen freezes and becomes pixilated.
restoring from nano backup finishes but stays at gs4g boot screen for t mobile
nano restore might be user error. i just factory reset and restored from there using the one click. restoring nano after one clicking resulted in same boot screen freeze as original
im sorry i don't have log cats but i hope i can provide further information if requested.
running latest Valhalla Black Edition with 1.3 OC undervolted
created backup with VB kernel recovery
booted fine with first flash of kernel running at 1.4
tried tegrak to underclock 1.4 and hardware froze with pixilation of screen in very light but noticable amount
reboot
wifi fix didn't work with flashing with cwm, suceeded with flash just no end result
tried to recover using cwm recovery with modded kernel caused boot freeze
one clicked back with no problems
i love this forum and want to try and provide feedback when possible, thank you for all you have accomplished over the years and i can't wait to see the perfect kernel and modem for ics. FB i love the AOKP. Unicorn Power!!! thank you all for all of your awesome work.

Ughhhh..... Lets break this one down, bit by bit.
rbedell said:
Yes read op.
Click to expand...
Click to collapse
Chill.
rbedell said:
I first want to than you for your support on a "update for a BML kernel".
i think it belongs in dev but still don't have enough posts to post.
Click to expand...
Click to collapse
Just hit thanks. This does not belong in dev.
rbedell said:
I ran into a few issues with no log cat because of hardware freeze.
Click to expand...
Click to collapse
You probably forgot to wipe data/factory reset or something...
rbedell said:
1st Tegrak will not load module for custom tweaks. Hardware failure vibrates indefinitely, and battery pull needed. works fine if you don't try and tweak. running 1.4 GHz without optimization works fine but can't underclock because of issue. the screen freezes and becomes pixilated.
Click to expand...
Click to collapse
Tegrak will not work. This kernel is already OC/UV. You just need setcpu or rom toolbox to set the cpu speed.
rbedell said:
restoring from nano backup finishes but stays at gs4g boot screen for t mobile
nano restore might be user error. i just factory reset and restored from there using the one click. restoring nano after one clicking resulted in same boot screen freeze as original
im sorry i don't have log cats but i hope i can provide further information if requested.
Click to expand...
Click to collapse
nano backup only backs up the kernel. Don't use it!
rbedell said:
running latest Valhalla Black Edition with 1.3 OC undervolted
created backup with VB kernel recovery
booted fine with first flash of kernel running at 1.4
tried tegrak to underclock 1.4 and hardware froze with pixilation of screen in very light but noticable amount
reboot
wifi fix didn't work with flashing with cwm, suceeded with flash just no end result
tried to recover using cwm recovery with modded kernel caused boot freeze
one clicked back with no problems
Click to expand...
Click to collapse
I don't even understand this stuff. You should work on making yourself more clear with ENGLISH grammar. Spell check helps too. Not trying to be a jerk, it's just hard as hell to read.
rbedell said:
i love this forum and want to try and provide feedback when possible, thank you for all you have accomplished over the years and i can't wait to see the perfect kernel and modem for ics. FB i love the AOKP. Unicorn Power!!! thank you all for all of your awesome work.
Click to expand...
Click to collapse
ugh... then say that in the aokp thread, not here.
My crystal ball says: you are younger then 17yo.

You just cleared up a bunch of crap for me... no I'm not 17 I'm 23... was just tired and my battery doesnt hold a charge on the laptop, it shut off a few times before I could post. That was some info and things I had installed and tried to do... Like I said probably user error, I was extremely tired and forgot to wipe my phone first... Ill try and learn from my mistakes. And I'm sorry I forget there is a thanks button...

rbedell said:
You just cleared up a bunch of crap for me... no I'm not 17 I'm 23... was just tired and my battery doesnt hold a charge on the laptop, it shut off a few times before I could post. That was some info and things I had installed and tried to do... Like I said probably user error, I was extremely tired and forgot to wipe my phone first... Ill try and learn from my mistakes. And I'm sorry I forget there is a thanks button...
Click to expand...
Click to collapse
I'm just saying. Everything you type is one long run-on sentence.
Notice how I break mine up.
It makes what you are saying easier to convey to others.
Don't worry. I was tired and grumpy
So what we learned:
Type like you're writing a letter
Don't use nano backup
Download alogcat/alogrec
Wiping cache and dalvik is fine, don't always need to wipe data, but sometimes you do.
I get grumpy sometimes too
:laugh:

Is this the kind of battery life we can expect for the mtd version of this kernel and/or the aries kernel port? I noticed this does have some things from aries (per Github History). The battery life with this kernel is epic, better than anything else I've used.
Thanks,
David

We don't know what kind of battery life you will expect from the ICS kernel because no one has tested the ICS kernel because bryan hasn't finished creating it yet. If and when it's released you'll get to see what kind of battery life you get with the way you use your own phone.

asj2583 said:
I'm new to this phone and not sure what bml is or what its used for and is this kernel for ics based roms
Click to expand...
Click to collapse
iamperson347 said:
Is this the kind of battery life we can expect for the mtd version of this kernel and/or the aries kernel port? I noticed this does have some things from aries (per Github History). The battery life with this kernel is epic, better than anything else I've used.
Thanks,
David
Click to expand...
Click to collapse
FBis251 said:
We don't know what kind of battery life you will expect from the ICS kernel because no one has tested the ICS kernel because bryan hasn't finished creating it yet. If and when it's released you'll get to see what kind of battery life you get with the way you use your own phone.
Click to expand...
Click to collapse
There is a reason for calling this kernel BlastOff. It's going to go through the galaxy of snacks Google has named their Android releases. It's starting off on Planet Gingerbread, BML style.
Eventually, if the stars align, it will end up reincarnated as MTD on Planet Gingerbread.
After reincarnation, it will head towards planet ICS... and on and on...
For now, we are still packing the ship with goodies. OC/UV, governers, I/O schedulers, mmc changes, and bcm4329 have already been packed. But I'm still adding more!
So for the medium term, this kernel will stay BML. You may see me experiment with MTD, but I would stay away from that stuff and stick with the BML kernel for now.
Enjoy my naming scheme.

FBis251 said:
We don't know what kind of battery life you will expect from the ICS kernel because no one has tested the ICS kernel because bryan hasn't finished creating it yet. If and when it's released you'll get to see what kind of battery life you get with the way you use your own phone.
Click to expand...
Click to collapse
No need for that kind of reply, I was simply asking a question. From what I can tell, this does use bits and pieces from Aries and that's what prompted the question. I didn't ask for an eta or anything to that affect. I also know that battery life is dependent on usage, but I know for a fact that on gingerbread the standby time is leaps and bounds better than what we have for ics (currently) (for most users) . It's even been mentioned that the kernel for ics had some battery draining issues by Bryan himself.
Sent from my SGH-T959V using xda app-developers app

That "kind of reply" was merited. Like I said in that post, we're not gonna know how the battery will be until the kernel gets created and tested. I can give you a prediction and tell you that it'll last you 10 days with heavy usage but I may be wrong.
We won't know until we test it.

BTW, unnamed - bhundven edition has been posted to the teamacid github.
I'm not making an official zip yet, as we have some bugs still to work out, but if you want a rom to play around with the new kernel, git clone it and run the mkzip.sh.
Let me know what you think, if you feel so daring
(again, disclaimer, I'm not responsible for messing your phone up, thats your problem. This rom has been tested and won't brick you, unless you do something stupid. This rom will not work with any other kernel, for now.)