Database Info

[Q] Cant root my galaxy sl-i9003

i tried everything [odin (using the cf-roots provided in tht other thread), androot, unlockroot and superonetouch]but i just cant get my phone rooted........
i have a samsung galaxy gt-i9003
firmware version - 2.3.6
baseband version - I9003DDKP4
kernel version - 2.6.35.7-CL882023 [email protected]#1
build number - GINGERBREAD.DDKP3
odin just gets stuck at "setup connection", for abt 2 hours (thts not supposed to happen i guess), so plz help me.
other apps just give the message "cant root your device"

Happened to me too...just change your usb cable...if not change usb port..it happens due improper connection n is hardware related..
Press thanks if that helpd
Sent from my GT-I9003 using XDA

loneagl said:
Happened to me too...just change your usb cable...if not change usb port..it happens due improper connection n is hardware related..
Press thanks if that helpd
Sent from my GT-I9003 using XDA
Click to expand...
Click to collapse
didnt work. i used 2 other cables, and another laptop. still stuck at "setup connection"

Try xxkpe.with pit file.it worked for me
Sent from my GT-I9003 using XDA

loneagl said:
Try xxkpe.with pit file.it worked for me
Sent from my GT-I9003 using XDA
Click to expand...
Click to collapse
plz elaborate....... (m a noob)

i know whats the problem your not flashing while in download mode. turn off your phone hold volume down then power then menu until download mode appeara. then connect to odin.
Sent from my GT-I9003 using XDA
---------- Post added at 06:20 PM ---------- Previous post was at 06:08 PM ----------
First install KIES, then odin. After that download bagaria.tar here
http://forum.xda-developers.com/showthread.php?t=1351056
go to download mode as i said above, connect to pc then open ODIN. Make sure the color of the box is YELLOW and there is Word "Added" in the log screen. Click PDA, then browse bagaria.tar. HOLLAAA.. )

marshygeek said:
i know whats the problem your not flashing while in download mode. turn off your phone hold volume down then power then menu until download mode appeara. then connect to odin.
Sent from my GT-I9003 using XDA
---------- Post added at 06:20 PM ---------- Previous post was at 06:08 PM ----------
First install KIES, then odin. After that download bagaria.tar here
http://forum.xda-developers.com/showthread.php?t=1351056
go to download mode as i said above, connect to pc then open ODIN. Make sure the color of the box is YELLOW and there is Word "Added" in the log screen. Click PDA, then browse bagaria.tar. HOLLAAA.. )
Click to expand...
Click to collapse
i am doing it in download mode. i m doin eveything as described in various other threads, but its still not working.........

Go to settings> application, development then check usb debugging mode then try again.

aritro88 said:
i tried everything [odin (using the cf-roots provided in tht other thread), androot, unlockroot and superonetouch]but i just cant get my phone rooted........
i have a samsung galaxy gt-i9003
firmware version - 2.3.6
baseband version - I9003DDKP4
kernel version - 2.6.35.7-CL882023 [email protected]#1
build number - GINGERBREAD.DDKP3
odin just gets stuck at "setup connection", for abt 2 hours (thts not supposed to happen i guess), so plz help me.
other apps just give the message "cant root your device"
Click to expand...
Click to collapse
I suggest you first flash your phone using Odin to XXKPE firmware. Then flash to XXKPQ/KPU (more stable). Download the root file for the installed firmware. You should be ok
Stock ROMs available here,
http://forum.xda-developers.com/showthread.php?t=1004647

rshankar said:
I suggest you first flash your phone using Odin to XXKPE firmware. Then flash to XXKPQ/KPU (more stable). Download the root file for the installed firmware. You should be ok
Stock ROMs available here,
http://forum.xda-developers.com/showthread.php?t=1004647
Click to expand...
Click to collapse
but i heard tht the experimental ROMS (XX series) hav a long list of bugs
marshygeek said:
Go to settings> application, development then check usb debugging mode then try again.
Click to expand...
Click to collapse
its obvious tht i hav done this. but it still dosent work

aritro88 said:
but i heard tht the experimental ROMS (XX series) hav a long list of bugs
Click to expand...
Click to collapse
Can you elaborate on what these bugs are? I'm using XXKPQ and I'm not facing any problems..
Sent from my i9003 with CM9

aritro88 said:
but i heard tht the experimental ROMS (XX series) hav a long list of bugs
Click to expand...
Click to collapse
No, thats not true. The only ones with bugs are the older roms. XXKPE is old but it's very stable with no bugs. Where did you hear that "XX series" roms are experimental? The "XX" or "DD" letters only indicate the region of the release. In this case "XX" roms are for europe while "DD" roms are for around India and some parts of Asia. However, you can still use roms like XXKPQ and XXKPU world-wide.
For your Rooting problem
Have you tried SuperOneClick? If not, just download the latest version and install. Then make sure debugging mode is ticked on your phone, open superoneclick and connect your phone. Just click Root and wait for phone to restart.
If you've already tried SuperOneClick, Then your best option is to install XXKPE with .pit file. Just follow the steps on this site and upgrade to DDKP3 or XXKPU, then try rooting your phone.
http://www.theinfomania.com/2012/04/28/how-to-upgrade-your-samsung-galaxy-sl-i9003-with-stock-roms-ddkp3-or-xxkpu/
Hope this helps, Cheers

plz help me guys, i am at it since 3 days now and i am still stuck
@The_GMAN - superoneclick isnt working at all

aritro88 said:
plz help me guys, i am at it since 3 days now and i am still stuck
@The_GMAN - superoneclick isnt working at all
Click to expand...
Click to collapse
Does the COM box turn yellow?
Sent from my GT-I9003 using XDA

remove your sd card while rooting.
Sent from my GT-I9003 using XDA

First thing you must install Samsung kies in you laptop and then install odin
Sent from my GT-I9003 using xda premium

Hi
Not sure if you're issue is fixed so I'll give my 2 cents.
Try cleaning the information of your USB devices using Drive Cleanup [use google ] assuming you have a Windows PC.
Then install latest Kies for latest USB drivers or if your PC is set to get drivers directly from the internet then updated drivers will be installed automatically once you attach your phone.
Hope this helps

aritro88 said:
plz help me guys, i am at it since 3 days now and i am still stuck
@The_GMAN - superoneclick isnt working at all
Click to expand...
Click to collapse
your phone still can on?

SOLVED
after soooooooo many days, my phone is finally rooted.
a friend intalled an XX series ROM and then rooted it, it worked fine. BUT the voice quality is dead now, its full of noise
guess ther's a package deal with everything these days

Guys --> M not a developer nor m too much into tech things..
I was reading alot about rooting phone & getting good (ICS) rom on my device (samsung i9003).
I have superoneclick with USB debugging on--> it stuck at step 7 & application freezes.
I have ODIN wid me....(dont knw what TAR..people are talking)...
I will be grateful if some one can help me...(stepwise direction will be a great help)..
Thanks

Not bricked but not working.

OK all...so I am new here and was trying to get JB to work on my tablet. I thought I had done the needed research but went wrong somewhere I guess. I tried to follow steps on a site I found from AndroidAuthority dot com (not sure if I am able to post the entire link or no?). I was trying to root and install ClockworkMod Recovery but I guess either something went wrong or I messed something up. From what I have been reading I guess I have not bricked my device since it still tries to load. It currently loops with the Samsung screen. I can still enter the download mode and recovery mode but not sure what I should try next. I tried via Odin again with no luck. Out of the box I was running 4.0.3 but did the OTA update to 4.0.4. Any help would be appreciated.
Thanks from a newbie!

Also I used espresso_recovery.tar.md5 as the recovery image if that helps at all. Thanks again.

Followed the steps from another site. Will follow these later today:
http://forum.xda-developers.com/showthread.php?t=1788625
I guess since I can still use Odin I should be all set. Sorry if this was in the wrong section.

jRower said:
Followed the steps from another site. Will follow these later today:
http://forum.xda-developers.com/showthread.php?t=1788625
I guess since I can still use Odin I should be all set. Sorry if this was in the wrong section.
Click to expand...
Click to collapse
You can use heimdale too. Ive had better luck using that for my phone, never tried my tabley but it should work.
Sent from my SGH-I997 using xda app-developers app

I haven't tried heimdale yet cause I do not want to add more gas to the flames. But I tried the other link I posted and still no luck. Also tried a different SD card to be on the safe side but no luck. Any ideas on what I should do next? Or any other info I can provide that might help?

Keep on trying... it should work sooner or later. Have the samsung drivers? If not install kies. Try other usb ports too.
Sent either from my p113 (gtab 2 7.0) or i997 (Infuse)

Ryanscool said:
Keep on trying... it should work sooner or later. Have the samsung drivers? If not install kies. Try other usb ports too.
Sent either from my p113 (gtab 2 7.0) or i997 (Infuse)
Click to expand...
Click to collapse
Should I keep on with the same procedure or you mean keep letting it boot in a cycle?

I used this with 4.0.4.
http://forum.xda-developers.com/showthread.php?t=1657056
i would suggest you follow from the beginning.
install samsung drivers and kies and odin. run odin as adminstrator.
pay close attention to the mention of the post #325 in the instruction as it what helps you 4.0.4 root process. its difference from 4.0.3.
also if you are on jb. you need to run cwm 6.0 not 5.0 make sure youre uploading the right file into odin.
---------- Post added at 02:05 PM ---------- Previous post was at 02:05 PM ----------
btw youre not bricked don't stress, youll sort it out soon enough

sonikot said:
I used this with 4.0.4.
http://forum.xda-developers.com/showthread.php?t=1657056
i would suggest you follow from the beginning.
install samsung drivers and kies and odin. run odin as adminstrator.
pay close attention to the mention of the post #325 in the instruction as it what helps you 4.0.4 root process. its difference from 4.0.3.
also if you are on jb. you need to run cwm 6.0 not 5.0 make sure youre uploading the right file into odin.
---------- Post added at 02:05 PM ---------- Previous post was at 02:05 PM ----------
btw youre not bricked don't stress, youll sort it out soon enough
Click to expand...
Click to collapse
Thanks...I'll give it a shot! Much appreciated.

Use section B of my guide.

MultipleMonomials said:
Use section B of my guide.
Click to expand...
Click to collapse
Followed all the steps in section B and I am still stuck in a boot loop. Any idea?

Then use the restore to stock procedure. But before you do, tell me: what step did you boot loop on?

Haven't been able to work on this again. I will try and get some time and get back to you. Thanks again for the help.

jRower said:
OK all...so I am new here and was trying to get JB to work on my tablet. I thought I had done the needed research but went wrong somewhere I guess. I tried to follow steps on a site I found from AndroidAuthority dot com (not sure if I am able to post the entire link or no?). I was trying to root and install ClockworkMod Recovery but I guess either something went wrong or I messed something up. From what I have been reading I guess I have not bricked my device since it still tries to load. It currently loops with the Samsung screen. I can still enter the download mode and recovery mode but not sure what I should try next. I tried via Odin again with no luck. Out of the box I was running 4.0.3 but did the OTA update to 4.0.4. Any help would be appreciated.
Thanks from a newbie!
Click to expand...
Click to collapse
Don't use ClockWorkmod, it's not designed specifically for Gtab2... CWM is bad.
you can try flash your gtab2 with ODIN instead

CWM is OFFICIALLY supported now and works good.
Don't fear.

silentvisitor said:
CWM is OFFICIALLY supported now and works good.
Don't fear.
Click to expand...
Click to collapse
Officially supported by WHO? Samsung ?
CWM is not designed for Gtab2. Just ask clockwork if you don't believe it.

Rotundjere said:
Officially supported by WHO? Samsung ?
CWM is not designed for Gtab2. Just ask clockwork if you don't believe it.
Click to expand...
Click to collapse
See here

Boot Loop
So I'm new here, I tried rooting my p3100, flashed cwm with Odin, as it rebooted from there it just keeps rebooting - need help please guys......any lil bit of advice would help - I've read on other posts to flash to the stock ROM, but how do i do this? where do i get the rom......

OK so I am back at it and still not having much luck. I can't get as far as the:
"CWM-based Recovery v6.0.1.0"
Screen.
From here I do not have a recovery file to use. Which should I use for the P3113....At this point I don't even care if I lose all the data on the tablet and go back to stock. Just need it working again and then do some more research on how to do it right..
Thanks again.

Then use Section E of my guide. It will wipe your data and restore your tablet to stock.

[Q] how to upgrade n8000 manually to jelly bean

hi I'm new to android sorry if i'm asking stupid questions:
1) any tutorial on how to upgrade to jb from ics?
2) is there any simple way which doesnt need rooting,doesnt void warranty and can be turned back to my original firmware when the official update is out?
Thanks

Search the post you will find many post on this
Go to this site http://rootgalaxynote.com/galaxy-no...y-bean-firmware-on-galaxy-note-10-1-gt-n8000/
Remember only follow the steps in the video where he flashes ICS.
What you will need to flash JB
Odin - download it from general section there is post in firmwares right at the top
Firmware - again you can download it from the same post
Should have all the drivers installed (Install Kies it should install all drivers, exit kies before you start to flash)
Once you download the file extract the file
Press power+ volume down button till you boot into download mode, once you do press the volume up button
Connect your table to you laptop using the usb cable (Charger cable)
run odin from the directory where you have downloaded it
click on PDA load the file you have just unzip it should be with the exten tar.md5
Dont change any other setting make sure everything except auto reboot is unchecked
Click on Start an wait till it gives you the complete message it will reboot automatically once it has done
If you get any errors let me know

samir_a said:
Remember only follow the steps in the video where he flashes ICS.
Click to expand...
Click to collapse
There are links of Indian ICS and Jelly Bean firmware updates in the link given by you. I should download another from the forum post instead?
how to flash back to my country's original rom if update is available in my country?
Thanks a lot

Which country are you from
Do not download files form that side they are outdated will post a link shortly from where you can download the rom from
---------- Post added at 12:08 PM ---------- Previous post was at 12:07 PM ----------
http://forum.xda-developers.com/showthread.php?t=2016792

From Malaysia

No JB rom out for you region you can use either the UK or Nordic region rom both are the same
---------- Post added at 12:17 PM ---------- Previous post was at 12:16 PM ----------
Or also just install the new German rom which is 4.1.2 it is the latest one though there is one drawback you will not recieve OTA updates

samir_a said:
No JB rom out for you region you can use either the UK or Nordic region rom both are the same
---------- Post added at 12:17 PM ---------- Previous post was at 12:16 PM ----------
Or also just install the new German rom which is 4.1.2 it is the latest one though there is one drawback you will not recieve OTA updates
Click to expand...
Click to collapse
ok, so i follow all the steps from the link given, but instead of using the outdated rom given, I replace it with my 4.1.1 for UK and 4.0.4 for UK,
am I correct?
[Step 8. You can root your new Note 10.1 using the CWM root method. Watch the latter part of the video tutorial above if you are having trouble.]
can I skip this step?

Ok just replace the rom with 4.1.1 flash it using odin as shown and stop dont do anything else. Root if you only want to because it will increase your flash count and void your warranty though there is a solution for that to

samir_a said:
Ok just replace the rom with 4.1.1 flash it using odin as shown and stop dont do anything else. Root if you only want to because it will increase your flash count and void your warranty though there is a solution for that to
Click to expand...
Click to collapse
I've done it it works! and i was surprised tht it was so easy. Thanks a lot for your help!

Your welcome !!

You can use the exynos exploit.apk to root your device without raising the flash counter...

yes just did that does it without any issue
Sent from my GT-N8000 using xda premium

ultramag69 said:
You can use the exynos exploit.apk to root your device without raising the flash counter...
Click to expand...
Click to collapse
I used this apk to root my n8000 and I know my camera is not working after disable the exploit. Is there any other way to disable the exploit and make the camera work?

[Q] Frustrated looking to Root Samsung GT- I5800 Froyo 2.2

Hi
Ok I know this is an old phone but I hope someone can help .
I've been hunting the forums for an easy way to root my Samsung GT-I5800 running Froyo 2.2.
There's lots of advice on the forums but they are old threads and the links they give to the suggested appllications such as :
Superonclick . z4root , etc don't work or the files are currupt.
I have used Superoneclick on a later samsung phone and it mad the job really easy but the version I have won't work with this phone / android version.
Maybe is some one has a the z4root files they could upload them , or any other suggestions would be appreciated.
Thanks

tetatate said:
Hi
Ok I know this is an old phone but I hope someone can help .
I've been hunting the forums for an easy way to root my Samsung GT-I5800 running Froyo 2.2.
There's lots of advice on the forums but they are old threads and the links they give to the suggested appllications such as :
Superonclick . z4root , etc don't work or the files are currupt.
I have used Superoneclick on a later samsung phone and it mad the job really easy but the version I have won't work with this phone / android version.
Maybe is some one has a the z4root files they could upload them , or any other suggestions would be appreciated.
Thanks
Click to expand...
Click to collapse
I used superoneclick and it worked grand. Z4root never works

anonymous724 said:
I used superoneclick and it worked grand. Z4root never works
Click to expand...
Click to collapse
Hi
Thanks for your response .
I've tried two versions of Superoneclick v1.7.00 and 2.3.3.0 and neither work for me.
I've just tried another tool x8toolbox , this gives an error ".... root not applicable to custom rom ..."
If you have a link to another version of Superoneclick I'll try that ?
Thanks .

tetatate said:
Hi
Thanks for your response .
I've tried two versions of Superoneclick v1.7.00 and 2.3.3.0 and neither work for me.
I've just tried another tool x8toolbox , this gives an error ".... root not applicable to custom rom ..."
If you have a link to another version of Superoneclick I'll try that ?
Thanks .
Click to expand...
Click to collapse
Sorry but im using my tab so dont have it. Maybe flash a custom rom using odin as theyll be rooted already
also, z4root may have messed with it. I read somewhere it messes with rooting his phone
---------- Post added at 07:04 PM ---------- Previous post was at 06:49 PM ----------
http://m.youtube.com/watch?v=362Vr95bwD4&desktop_uri=/watch?v=362Vr95bwD4
try this

Hi
Thanks . I had seen this YouTube video, the links to superoneclick no longer work.
In fact the two links direct form the shortfuse website no longer link to the file.

Well im not sure then. Im pretty sure z4root messes up something, and it may be you need to flash a custom rom in odin. Sorry but I cant try anything myself because I dont have the phone anymore (at least for a while).

tetatate said:
Hi
Thanks . I had seen this YouTube video, the links to superoneclick no longer work.
In fact the two links direct form the shortfuse website no longer link to the file.
Click to expand...
Click to collapse
Rather than rooting it is best to install a prerooted custom ROM via odin.

iVinod said:
Rather than rooting it is best to install a prerooted custom ROM via odin.
Click to expand...
Click to collapse
Hi
I looked for Odin on the market and it seem that Odin required root , so wouldn't I need root to use it ?
If not can you suggest a suitable custom rom ?
Thanks

tetatate said:
Hi
I looked for Odin on the market and it seem that Odin required root , so wouldn't I need root to use it ?
If not can you suggest a suitable custom rom ?
Thanks
Click to expand...
Click to collapse
Odin does not require root. You have to get into download mode with a combination of keys. (May be Mobile Odin requires root, I never used it).
Check this thread for Custom roms. http://forum.xda-developers.com/showthread.php?t=1234591. I would suggest PuruKisadHybrid custom ROM.
Refer to this thread for how to use odin. http://forum.xda-developers.com/showthread.php?t=1372414
You need to install samsung drivers first.

Hi
Thanks for the information and links.
I was hoping to be able to root without wiping data but I will consider this method.
The odin tutorial was a bit hard to understand but I'll try watching carefully and it may become clear.

tetatate said:
Hi
Thanks for the information and links.
I was hoping to be able to root without wiping data but I will consider this method.
The odin tutorial was a bit hard to understand but I'll try watching carefully and it may become clear.
Click to expand...
Click to collapse
you can root without wiping data. Just search for rooting procedure in the forum. But custom ROM gives lot more features for you than stock one.
PS: Please hit thanks if anybody helps you.

Use this and try again
tetatate said:
Hi
Thanks for your response .
I've tried two versions of Superoneclick v1.7.00 and 2.3.3.0 and neither work for me.
I've just tried another tool x8toolbox , this gives an error ".... root not applicable to custom rom ..."
If you have a link to another version of Superoneclick I'll try that ?
Thanks .
Click to expand...
Click to collapse
Hi i had this version of superoneclick 1.7.00 but it worked fine. Make sure u have turned on usb debugging and installed the drivers.Also in case of exploit use rageagainstthecage exploit and not psneuter.
And for drivers consider installing these http://drivers.softpedia.com/get/MOBILES/Samsung/Samsung-Galaxy-S-USB-Driver-for-Windows-x86.shtml

I haven't been able to find a non- data wipe method as varioius versions of superoneclick and other tools aren't working for me on this phone.
Perhaps I'll go down the custom rom route ,
If I can find some good clear instructions .
Thanks for your help.

Thanks for the link.
Unfortunately this one isn't working ether
Generating an excetion which ever exploit option is selected.
I wonder if it is an issue with the phone rather than the tool .
It has allready been hard reset to factory state ?

tetatate said:
Thanks for the link.
Unfortunately this one isn't working ether
Generating an excetion which ever exploit option is selected.
I wonder if it is an issue with the phone rather than the tool .
It has allready been hard reset to factory state ?
Click to expand...
Click to collapse
Has the driver been installed? Which OS you are using?
You need to install proper driver before trying to root. For your info, essentially all rooting methods are non-data wipe.
for instructions check this link: http://forum.xda-developers.com/showthread.php?p=12451340

iVinod said:
Has the driver been installed? Which OS you are using?
You need to install proper driver before trying to root. For your info, essentially all rooting methods are non-data wipe.
for instructions check this link: http://forum.xda-developers.com/showthread.php?p=12451340
Click to expand...
Click to collapse
Hi I've installed the Rom you suggested using ODIN.
It's working very nicely.
And , of course it's now rooted
Thanks for your help!

Use a cf root flash a custom recovery like cwm and flash a new Rom
Sent from my HTC Desire using xda app-developers app

Max :) said:
Use a cf root flash a custom recovery like cwm and flash a new Rom
Sent from my HTC Desire using xda app-developers app
Click to expand...
Click to collapse
WHAT? This device has no separate recovery partition, neither CF-ROOT Kernel. This is not Galaxy S or S3
z4Root should work on 2.1, for 2.2 the easiest way is to use custom kernel, with it you get custom recovery and via that recovery you can flash some zip with su binary and then get Superuser/SuperSU app. SuperOneClick is buggy with G3.

I've used a ch root so....
Sent from my HTC Desire using xda app-developers app
---------- Post added at 08:21 PM ---------- Previous post was at 08:19 PM ----------
I am may confused .. Lets say it on a different way , a root based on the original samsung software, and from there with odin flash cwm(i ve done it on this way) greetings,
Max
Sent from my HTC Desire using xda app-developers app

Z4 Root
Z4 Root can Help you .........

[Q] help with flashing ICS ....PLEASE?

I am stuck on the following screen. my device is P920 and am Gingerbread firmware and want to upgrade to ICS so i can install ICS ROMS.... OMAP4430 won't pop up AT ALL and I am reallly stuck
someone, anyone, PLEASE help :/

http://forum.xda-developers.com/showthread.php?t=2195753
Sign onto pc as admin. You will need to delete LG stuff on your pc before starting. Turn off antivirus temporarily to extract some files; Defender in particular may delete certain driver files and not tell you.

thanks.
But after I did something stupid :/
I flashed another ROM and now i have i get a security error and i can't even use flash tool :/
HELP PLEASE.
it's my sisters phone. she would kill me haha

Just reflash firmware by LG Flash Tool. It will rewrite everything. What do you mean you can't use it?
---------- Post added at 12:05 AM ---------- Previous post was at 12:04 AM ----------
Some ROMs require custom bootloader; normally the cause of security error.
---------- Post added at 12:10 AM ---------- Previous post was at 12:05 AM ----------
You must be on ICS to flash that custom ROM; you can't just install it over GB. That is what the tutorial is for...to install ICS and then the ROM.
Multiple posts are due to xda app being goofy. Can't edit a post. Dunno what is up.

I connect it by pulling battery and holding volume up and it just keeps connecting and disconnecting. It did this when I used your guide but everything turned out OK following your thread you sent me earlier. But I decided to try a different ROM (I guess just because I could) and then I got security error. -_- when I try lgflashtool is just says ready and doesn't pick up my device. Tried restarting PC ect.
Sent from my LG-D802 using XDA Premium 4 mobile app

someone please help?
Phone wont even get detected in lgflashtool. tried volume up. pulling battery ect.

Install drivers first as in part 1.

Managed to boot into Fastboot using OS hacking tool. but all i get when trying flash recoveries or bootload is remote partition does not exist. and LGflashtool can't detect it. am in big trouble guys please.

drastic00 said:
Install drivers first as in part 1.
Click to expand...
Click to collapse
It won't let me install any phone drivers :S

You might need this guide
http://forum.xda-developers.com/showthread.php?t=1942836
I have never flashed a wrong ROM so I have not followed his unbrick guide

drastic00 said:
You might need this guide
http://forum.xda-developers.com/showthread.php?t=1942836
I have never flashed a wrong ROM so I have not followed his unbrick guide
Click to expand...
Click to collapse
AHA I think the main big problem is that the LGE mobile USB serial port is not detected/installed! Anyway to get this installed cause I can't boot up the phone?

If you had read and followed my guide you would already have it.