Database Info

No CWM for WT19i???

Hi...
I have been searching the net for about a week now and couldn't find CWM recovery for my SE Live WT19i. Maybe i am looking in the wrong places. phone runs on 2.3.4 with 4.0.2.A.0.62 (rooted). Also please name any good Roms for the phone...
Please help.
Thanks...

c4capricorn said:
Hi...
I have been searching the net for about a week now and couldn't find CWM recovery for my SE Live WT19i. Maybe i am looking in the wrong places. phone runs on 2.3.4 with 4.0.2.A.0.62 (rooted). Also please name any good Roms for the phone...
Please help.
Thanks...
Click to expand...
Click to collapse
take a look
link1
link2
link3
link4
you need an unlocked bootloader instructions above
use a laptop on battery when flashing to protect from bootloader errors
if something wrong when flashing bootloader your phone is bricked
you have to use service tools to solve this problem
(screen is black phone looks like dead)

install this:
https://play.google.com/store/apps/details?id=com.pvy.CWMinstaler&hl=en

rajmi said:
install this:
https://play.google.com/store/apps/details?id=com.pvy.CWMinstaler&hl=en
Click to expand...
Click to collapse
I installed it but says the phone is not supported...

get SE_Extreme_Tweak_Installer_1.8.... It works
---------- Post added at 04:20 PM ---------- Previous post was at 04:15 PM ----------
get SE_Extreme_Tweak_Installer_1.8.... It works
to enter into recovery mod, turn off ur phone and press volume down key multiple times while turning on

Most safest/recommended way to root?

Hi,
I have the Galaxy SL i9003 phone and have decided to root it.
I'm quite a novice when it comes to these things so please bear with me.
Could anyone advise me on the safest and most recommended way to root my phone?
I've heard horror stories of phones being "bricked" after rooting :crying:
I would like to use a program that will let me "un-root" a phone also if need be.
Thanks.

If you probably could find the one-click root method for your device, it'd be best. Or if you're running below gingerbread version then install the Z4-root app for rooting/unrooting your device.
Sent from my LG-SU660 using xda app-developers app

I haven't messed with the phone at all.
It's got the same software/hardware when bought.
I hope this helps.

Gives us your details go to settings about phone and give everything then i'll guide you on how to root it and the miracles of rooting. Dont be scared of that rumors. Rooting will not really brick the phone if done correctly.

marshygeek said:
Gives us your details go to settings about phone and give everything then i'll guide you on how to root it and the miracles of rooting. Dont be scared of that rumors. Rooting will not really brick the phone if done correctly.
Click to expand...
Click to collapse
Ok will do.
Let me back up all the data on my phone first.

Root DDLF2
I'm not able to root my i9003 running GingerBread.DDLF2(2.3.6 Value Pack For India) using Super One Click. Is there any alternative to root in safest way possible...?

for any gingerbread roms u can flash this via odin as pda to root http://forum.xda-developers.com/showthread.php?t=1351056

guruprasadns said:
I'm not able to root my i9003 running GingerBread.DDLF2(2.3.6 Value Pack For India) using Super One Click. Is there any alternative to root in safest way possible...?
Click to expand...
Click to collapse
SOC is only for froyo . For gingerbread u have to flash pda file through odin . For more details visit ganesh's thread for rooting for your phone ROM.
Sent from my GT-I9003 using Tapatalk 2

marshygeek said:
Gives us your details go to settings about phone and give everything then i'll guide you on how to root it and the miracles of rooting. Dont be scared of that rumors. Rooting will not really brick the phone if done correctly.
Click to expand...
Click to collapse
Ok here it is.
Model number: GT-I9003
Firmware: 2.2.1
Baseband version: I9003XXKB1
Kernel version: 2.6.32.9 [email protected] #1
Build number: FROYO.XWKB4

Based on my firmware how would you recommend me to root?

So you are in froyo, would you mind upgrading to gingerbread first before rooting?
---------- Post added at 07:17 AM ---------- Previous post was at 07:09 AM ----------
If you mind upgrading your firmware (well i suggest you really upgrade because froyo is too old for me) nevertheless, follow this thread ive found http://forum.xda-developers.com/showthread.php?t=987169.

marshygeek said:
So you are in froyo, would you mind upgrading to gingerbread first before rooting?
---------- Post added at 07:17 AM ---------- Previous post was at 07:09 AM ----------
If you mind upgrading your firmware (well i suggest you really upgrade because froyo is too old for me) nevertheless, follow this thread ive found http://forum.xda-developers.com/showthread.php?t=987169.
Click to expand...
Click to collapse
Thanks!
This worked a treat.
Am on a rooted phone now!
Is there anything recommended to do now?
Like update to a better firmware or operating system?

Glad for you but thanks is greatly appreciated with the thanks button. lol. You may want to upgrade to gingerbread first. Download xxkpe and xxkpq first here then tell me when youre done. http://forum.xda-developers.com/showthread.php?t=1004647

skatlyup said:
Ok here it is.
Model number: GT-I9003
Firmware: 2.2.1
Baseband version: I9003XXKB1
Kernel version: 2.6.32.9 [email protected] #1
Build number: FROYO.XWKB4
Click to expand...
Click to collapse
You're are still on Froyo? If you've got time, upgrade your device to GB DDLF2 2.3.6 and just flash Bam Kernel v14 fix. You'll find the Stock Firmware and Bam Kernel on the Developing Section. The kernel will root your phone.
Sent from my GT-I9003 using xda app-developers app

marshygeek said:
Glad for you but thanks is greatly appreciated with the thanks button. lol. You may want to upgrade to gingerbread first. Download xxkpe and xxkpq first here then tell me when youre done. http://forum.xda-developers.com/showthread.php?t=1004647
Click to expand...
Click to collapse
Thanks given.
When I return from work I'll unroot via superonecllick, download the files then repost here for further instructions.

you dont need to unroot it. Just continue. Pm me after downloading. Also include downloading ODIN3 v 1.85 from here http://www.google.com.ph/url?sa=t&r...noGoAw&usg=AFQjCNF7sF0f2yJp0IxHp1ISlP2fzGKhtw

Root sgs i9003 using linux
I have downloaded superone click ver 2.3.3, installed mono on ubuntu 12.04. the device is recognized using adb. but superoneclick hangs with the message 'waiting for device'. any good way of rooting my phone? I have froyo.
---------- Post added at 07:50 PM ---------- Previous post was at 07:38 PM ----------
gadepall said:
I have downloaded superone click ver 2.3.3, installed mono on ubuntu 12.04. the device is recognized using adb. but superoneclick hangs with the message 'waiting for device'. any good way of rooting my phone? I have froyo. I would like to root in ubuntu only.
Click to expand...
Click to collapse

gadepall said:
I have downloaded superone click ver 2.3.3, installed mono on ubuntu 12.04. the device is recognized using adb. but superoneclick hangs with the message 'waiting for device'. any good way of rooting my phone? I have froyo.
---------- Post added at 07:50 PM ---------- Previous post was at 07:38 PM ----------
gadepall said:
I have downloaded superone click ver 2.3.3, installed mono on ubuntu 12.04. the device is recognized using adb. but superoneclick hangs with the message 'waiting for device'. any good way of rooting my phone? I have froyo. I would like to root in ubuntu only.
Click to expand...
Click to collapse
Maybe you dont have the drivers installed. Install Kies first.
---------- Post added at 08:05 AM ---------- Previous post was at 07:59 AM ----------
@skatylup after downloading (Be sure you have kies already) then follow the guide here pal, http://forum.xda-developers.com/showthread.php?t=1133787 just follow carefully. The latona.pit is in XXKPE folder. Its an easy step by step process. Once in XXKPQ, Root it with this http://forum.xda-developers.com/showthread.php?t=1351056 download bagaria.tar then flash in odin via PDA. (should be in download mode again.)
After doing above instructions, Go to Recovery mode w/c is volume up + home +power. Then wipe cache and dalvik cache. Then your good to go. Your now rooted and can try different custom roms.
Click to expand...
Click to collapse

skatlyup said:
Based on my firmware how would you recommend me to root?
Click to expand...
Click to collapse
i recommend you use ODIN.. from the very first day i was a total noob in android, i've always used odin..
relatively, you can search your firmware here and MATCH it to whatever CF Root available
http://forum.xda-developers.com/showthread.php?t=1331253
also, you can use amit.bagaria's Root.
i attached.
if you use amit.bagaria's root (it's universal, meaning you can flash this root to ANY gb firmware)
all you need is Odin and your usb cable and COMMON SENSE
1. go to settings>applications>usb debugging
2. go to download mode: turn off phone>volume down+home button+power off button (hold them all at the same time until it goes to download mode)
3. connect phone with usb to pc
4. open odin
5. see if odin recognizes your phone (at the upper left, there's a yellow box)
6. click PDA and choose the file amit.bagaria (the one i attached)
7. click start
8. DO NOT TOUCH ANYTHING UNTIL THE ROOTING FINISHES
9. wait for the phone to restart
10. congrats, you just successfully rooted your phone
if anything goes wrong, you did something stupid. lol, im just a buddy trying to help you out
**all credits go to the devs for this

snap. i forgot you're on froyo XD
go here, http://forum.xda-developers.com/showthread.php?t=1004647
flash gingerbread first.. then root

Not bricked but not working.

OK all...so I am new here and was trying to get JB to work on my tablet. I thought I had done the needed research but went wrong somewhere I guess. I tried to follow steps on a site I found from AndroidAuthority dot com (not sure if I am able to post the entire link or no?). I was trying to root and install ClockworkMod Recovery but I guess either something went wrong or I messed something up. From what I have been reading I guess I have not bricked my device since it still tries to load. It currently loops with the Samsung screen. I can still enter the download mode and recovery mode but not sure what I should try next. I tried via Odin again with no luck. Out of the box I was running 4.0.3 but did the OTA update to 4.0.4. Any help would be appreciated.
Thanks from a newbie!

Also I used espresso_recovery.tar.md5 as the recovery image if that helps at all. Thanks again.

Followed the steps from another site. Will follow these later today:
http://forum.xda-developers.com/showthread.php?t=1788625
I guess since I can still use Odin I should be all set. Sorry if this was in the wrong section.

jRower said:
Followed the steps from another site. Will follow these later today:
http://forum.xda-developers.com/showthread.php?t=1788625
I guess since I can still use Odin I should be all set. Sorry if this was in the wrong section.
Click to expand...
Click to collapse
You can use heimdale too. Ive had better luck using that for my phone, never tried my tabley but it should work.
Sent from my SGH-I997 using xda app-developers app

I haven't tried heimdale yet cause I do not want to add more gas to the flames. But I tried the other link I posted and still no luck. Also tried a different SD card to be on the safe side but no luck. Any ideas on what I should do next? Or any other info I can provide that might help?

Keep on trying... it should work sooner or later. Have the samsung drivers? If not install kies. Try other usb ports too.
Sent either from my p113 (gtab 2 7.0) or i997 (Infuse)

Ryanscool said:
Keep on trying... it should work sooner or later. Have the samsung drivers? If not install kies. Try other usb ports too.
Sent either from my p113 (gtab 2 7.0) or i997 (Infuse)
Click to expand...
Click to collapse
Should I keep on with the same procedure or you mean keep letting it boot in a cycle?

I used this with 4.0.4.
http://forum.xda-developers.com/showthread.php?t=1657056
i would suggest you follow from the beginning.
install samsung drivers and kies and odin. run odin as adminstrator.
pay close attention to the mention of the post #325 in the instruction as it what helps you 4.0.4 root process. its difference from 4.0.3.
also if you are on jb. you need to run cwm 6.0 not 5.0 make sure youre uploading the right file into odin.
---------- Post added at 02:05 PM ---------- Previous post was at 02:05 PM ----------
btw youre not bricked don't stress, youll sort it out soon enough

sonikot said:
I used this with 4.0.4.
http://forum.xda-developers.com/showthread.php?t=1657056
i would suggest you follow from the beginning.
install samsung drivers and kies and odin. run odin as adminstrator.
pay close attention to the mention of the post #325 in the instruction as it what helps you 4.0.4 root process. its difference from 4.0.3.
also if you are on jb. you need to run cwm 6.0 not 5.0 make sure youre uploading the right file into odin.
---------- Post added at 02:05 PM ---------- Previous post was at 02:05 PM ----------
btw youre not bricked don't stress, youll sort it out soon enough
Click to expand...
Click to collapse
Thanks...I'll give it a shot! Much appreciated.

Use section B of my guide.

MultipleMonomials said:
Use section B of my guide.
Click to expand...
Click to collapse
Followed all the steps in section B and I am still stuck in a boot loop. Any idea?

Then use the restore to stock procedure. But before you do, tell me: what step did you boot loop on?

Haven't been able to work on this again. I will try and get some time and get back to you. Thanks again for the help.

jRower said:
OK all...so I am new here and was trying to get JB to work on my tablet. I thought I had done the needed research but went wrong somewhere I guess. I tried to follow steps on a site I found from AndroidAuthority dot com (not sure if I am able to post the entire link or no?). I was trying to root and install ClockworkMod Recovery but I guess either something went wrong or I messed something up. From what I have been reading I guess I have not bricked my device since it still tries to load. It currently loops with the Samsung screen. I can still enter the download mode and recovery mode but not sure what I should try next. I tried via Odin again with no luck. Out of the box I was running 4.0.3 but did the OTA update to 4.0.4. Any help would be appreciated.
Thanks from a newbie!
Click to expand...
Click to collapse
Don't use ClockWorkmod, it's not designed specifically for Gtab2... CWM is bad.
you can try flash your gtab2 with ODIN instead

CWM is OFFICIALLY supported now and works good.
Don't fear.

silentvisitor said:
CWM is OFFICIALLY supported now and works good.
Don't fear.
Click to expand...
Click to collapse
Officially supported by WHO? Samsung ?
CWM is not designed for Gtab2. Just ask clockwork if you don't believe it.

Rotundjere said:
Officially supported by WHO? Samsung ?
CWM is not designed for Gtab2. Just ask clockwork if you don't believe it.
Click to expand...
Click to collapse
See here

Boot Loop
So I'm new here, I tried rooting my p3100, flashed cwm with Odin, as it rebooted from there it just keeps rebooting - need help please guys......any lil bit of advice would help - I've read on other posts to flash to the stock ROM, but how do i do this? where do i get the rom......

OK so I am back at it and still not having much luck. I can't get as far as the:
"CWM-based Recovery v6.0.1.0"
Screen.
From here I do not have a recovery file to use. Which should I use for the P3113....At this point I don't even care if I lose all the data on the tablet and go back to stock. Just need it working again and then do some more research on how to do it right..
Thanks again.

Then use Section E of my guide. It will wipe your data and restore your tablet to stock.

[Q] google process force close

i used odin to try and root my phone...now all i get is the screen where you touch the andriod to begin and it keeps saying...the application google services framework(process com.google.process.gapps)has stopped unexpectedly.please try again..force close...someone please help..im lost..and i can find nothing on this..

Deleted

johnb380 said:
Deleted
Click to expand...
Click to collapse
Your not a moderator in the first place so you can't just say deleted.
Sent from my SGH-T769 using xda premium
---------- Post added at 06:27 AM ---------- Previous post was at 06:25 AM ----------
Did you try rebooting the phone? If the problem still consists try factory resetting to stock and the root it again.
Sent from my SGH-T769 using xda premium

im_awesome_right? said:
Your not a moderator in the first place so you can't just say deleted.
Sent from my SGH-T769 using xda premium
---------- Post added at 06:27 AM ---------- Previous post was at 06:25 AM ----------
Did you try rebooting the phone? If the problem still consists try factory resetting to stock and the root it again.
Sent from my SGH-T769 using xda premium
Click to expand...
Click to collapse
Don't got to be a moderator to delete my own post... Lol
I had responded but deleted it it hence the "DELETED" IN MY POST
- - - - - - I'm not a Dev, I just flash ALOT!- - - - - - - - - If I've helped you the THANX button is - - - - - - - - - - - - - - only 2 clicks away! - - - - - - - - - -

nmadrid said:
i used odin to try and root my phone...now all i get is the screen where you touch the andriod to begin and it keeps saying...the application google services framework(process com.google.process.gapps)has stopped unexpectedly.please try again..force close...someone please help..im lost..and i can find nothing on this..
Click to expand...
Click to collapse
What gapps did you use? Sounds like a compatibility issue. Use the one from the Blaze Bible. After you flash the zip, factory reset. That should solve your problem. Still stuck? Boot cwm fix permissions, reboot. Last resort, start over from scratch and read very carefully each step....
If it helped hit thx

Same thing
I am having the same issue. It was after I installed cwm. the next step was to reboot into recovery mode, but I can't find anywhere that tells me to do it manually. I have also tried via ADB w/o success. I have tried various USB drivers in download mode and regular mode.
Any idea how to get into cwm and push .zips via USB from this state? Or, if I could install gapps from Odin, but I can't find a .tar for gapps.

heftykins said:
I am having the same issue. It was after I installed cwm. the next step was to reboot into recovery mode, but I can't find anywhere that tells me to do it manually. I have also tried via ADB w/o success. I have tried various USB drivers in download mode and regular mode.
Any idea how to get into cwm and push .zips via USB from this state? Or, if I could install gapps from Odin, but I can't find a .tar for gapps.
Click to expand...
Click to collapse
Must be rooted for this method.
Download terminal emulator from play store. Open and type su press enter. Then type reboot recovery and press enter.
Sent from my SGH-T769 using xda app-developers app

xWolf13 said:
Your not a moderator in the first place so you can't just say deleted.
Sent from my SGH-T769 using xda premium
---------- Post added at 06:27 AM ---------- Previous post was at 06:25 AM ----------
Did you try rebooting the phone? If the problem still consists try factory resetting to stock and the root it again.
Sent from my SGH-T769 using xda premium
Click to expand...
Click to collapse
Off topic.. I remember when I was all noobish hahaha. This post makes me looks stupid lol..

Wipe data/factory reset. from the stock recovery only works if you're on ics.

have you tried installing/ reinstalling the right gaaps?
Just clear cache and Dalvik.

Worst Case Scenario!
Hm, if none of the above comments help you try this:
Flash back to Official Stock GB using this thread.
(I know this thread has NOTHING to do with your problem, but it has a link to Stock GB AND a guide on how to flash it.)
After you flashed that, root your phone using this thread
Be careful and READ EVERYTHING before following either of those two threads, you could potentially end up destroying your device, if you do you'll have no one to yell at but yourself!

same problem here. haven't successfully fixed my friend's device. HELP!!
FroBreadCreamJellyPie said:
Hm, if none of the above comments help you try this:
Flash back to Official Stock GB using this thread.
(I know this thread has NOTHING to do with your problem, but it has a link to Stock GB AND a guide on how to flash it.)
After you flashed that, root your phone using this thread
Be careful and READ EVERYTHING before following either of those two threads, you could potentially end up destroying your device, if you do you'll have no one to yell at but yourself!
Click to expand...
Click to collapse
google services stopping unexpectedly after flashing - HELP SOS
Quote:
Originally Posted by AndyAZ1000 View Post
after i did this, it keeps saying
screen "Welcome to SGH-T769, TOUCH THE ANDROID TO BEGIN" but whenever i touch the android, it gives me and error "GOOGLE SERVICES FRAMEWORK HAS STOPPED UNEXPECTEDLY"
is this suppose to happen?
HELP!
I am having the same problem here. I was trying to root my friend's phone using the link with the odin and then install the newest CM (which btw is JUST AWESOME). On download mode, I'm seeing like 10 counts and custom binary. I also tried odin with this T769UVLB7_T769TMBLB7_TMB that I found in another post.
I erased everything in the 1.4 gb rom, I've tried it all for hours. I saw this post and somebody else with the same problem but it looks like they couldn't solve it. I don't think it's a driver issue because the roms get flashed but the problems occur on the welcome start page. Then all the processes and services start stopping unexpectedly and I can't go any further. please somebody help!!!
Also installed Samsung Kies to see if it could change the firmware or fix it or anything. That's what I used to erase everything on the ROM (because I thought that could be the issue). But no, kies says my firmware can't be recognized or sth like that.
I have flashed on my own blaze thousands of ROMS form xda, but this is the first time I see something like this.
---------- Post added at 04:01 AM ---------- Previous post was at 03:38 AM ----------
Quote:
Originally Posted by jparnell8839 View Post
wipe data/erase cache. sometimes, things go borky. thing is, if you followed the guide to a T, you should be 100% stock, but you've got things going wrong. if that doesnt work, reflash with odin again
How do I wipe and erase that on odin mode??
I'm having the same issues and no success. Guys, I will definitely appreciate this one. Please HELP!!

[Q] Sony Xperia Tipo softbrick ?

Hello, I'm new to xda and android modding, in other words: a lame-ass noob. I was quite interested in flashing cyanogenmod on my xperia tipo(under my circumstances I can't really use a pc) I rooted it via a nifty little app called baidu-root tool, as a noob I'm not sure that gives it proper root access, on the cwm ROM manager I tried to flash a recovery on my phone but I failed and gave up. Since I can't use a PC I had to think of a way to unlock my boot loader so I I downloaded the app that soft bricked my tipo: ez unlock. It was too good to be true, so I rebooted and eversince it's been bricked, so I have to unbrick it pronto. I read somewhere that I can get flash tool and relock the boot loader and via PC companion I can hit "repair my phone" and viola it's back to normal... any advice ? Also I can't find the proper s1 fast boot drivers, please help...

Yes you can always restock.. just go to your phone model's development thread and download stock rom for yourself and flash it using pc
Sent from my GT-I9300 using XDA Premium 4 mobile app
---------- Post added at 12:46 PM ---------- Previous post was at 12:34 PM ----------
xazakasrizava said:
Hello, I'm new to xda and android modding, in other words: a lame-ass noob. I was quite interested in flashing cyanogenmod on my xperia tipo(under my circumstances I can't really use a pc) I rooted it via a nifty little app called baidu-root tool, as a noob I'm not sure that gives it proper root access, on the cwm ROM manager I tried to flash a recovery on my phone but I failed and gave up. Since I can't use a PC I had to think of a way to unlock my boot loader so I I downloaded the app that soft bricked my tipo: ez unlock. It was too good to be true, so I rebooted and eversince it's been bricked, so I have to unbrick it pronto. I read somewhere that I can get flash tool and relock the boot loader and via PC companion I can hit "repair my phone" and viola it's back to normal... any advice ? Also I can't find the proper s1 fast boot drivers, please help...
Click to expand...
Click to collapse
Try this tutorial! BTW not made by me.. if you still appriciate my efforts, you can hit thanks button or subscribe to my youtube channel (you are awesome )
https://www.youtube.com/user/pushkar619
[YOUTUBE]https://www.youtube.com/watch?v=abzUMeVvlr8[\YOUTUBE]
---------- Post added at 12:50 PM ---------- Previous post was at 12:46 PM ----------
Try this tutorial! BTW not made by me.. if you still appriciate my efforts, you can hit thanks button or subscribe to my youtube channel (you are awesome )
https://www.youtube.com/user/pushkar619
[YOUTUBE]
https://www.youtube.com/watch?v=abzUMeVvlr8[/YOUTUBE]