Database Info

[Q] Help in returning to stock rom

So i'm looking for a little help.
A little while back I used this thread : [GUIDE] TF300T Unlock/Root/Flash for Factory JB Devices (newbie friendly)
To help me install this custom rom : [ROM][TF300]|Mar 28| Energy™ -.¸¸.·´¯ Official JB 4.2.1 Stock or Themed ¯´·.¸¸. -
onto my girlfriends TF300T tablet
and I have this : [RECOVERY][TF300T/TG] TWRP 2.5.0.0 Touch Recovery! [2013-4-9] on there as well
but I can't remember if this was part of the unlock/root/flash process or not, so i'm not sure if it used it during the process or if I added it shortly afterword
now its been while since I have done it but then the tablet started to restart randomly while she was using it.
so I figured no biggie maybe an app got messed up or something, and so I told her to back up her pics, exc she wanted off the unit
and I could look at reinstalling the apps or just taking the unit back to factory rom
about a week later it started to reboot more often randomly
and now it is to the point where it will not make it into the rom
now I can make it into the boot selection where I can choose RCK (for the TWRP), USB, or the other 2 options
and I know I can make it into the TWRP tool as well and it does not repeatedly boot from there, so i'm sure its a rom issue and not a hardware issue, but I could still be wrong
the unit is currently charging so I have not had a chance to try for the usb connection option or anything else yet
hopefully the usb option will work so I can try to recover the pics, exc before taking the unit back to factory
now in the process I know I have unlocked the unit, I believe I have done the min root but have not fully rooted the unit if that makes sense
so i'm just wondering if I will half to fully root (and how do I do that if I do since I can't make it into a rom)
how do I clear the rom that has gone bad
how do I install a factory rom (how do I tell which is the lastest rom, and which one is needed for my unit)
and then I should be good from there
if you need any more info please let me know and maybe some instructions on how to get to that info
in the process of putting the energy rom onto it, I spent a week of reading, researching, and figuring out which way would probably be the safest for me to do, plus the easiest for me to understand
now that it has been so long I have been reading and researching again, I just need that nudge that gets me in the right direction
i'm sure i'm not the only one that has had this issue with a rom, and i'm also sure there is a guide out there already that goes over how to put it back to a factory rom
just for some reason i'm either over looking it or not finding it

allusion said:
So i'm looking for a little help.
A little while back I used this thread : [GUIDE] TF300T Unlock/Root/Flash for Factory JB Devices (newbie friendly)
To help me install this custom rom : [ROM][TF300]|Mar 28| Energy™ -.¸¸.·´¯ Official JB 4.2.1 Stock or Themed ¯´·.¸¸. -
onto my girlfriends TF300T tablet
and I have this : [RECOVERY][TF300T/TG] TWRP 2.5.0.0 Touch Recovery! [2013-4-9] on there as well
but I can't remember if this was part of the unlock/root/flash process or not, so i'm not sure if it used it during the process or if I added it shortly afterword
now its been while since I have done it but then the tablet started to restart randomly while she was using it.
so I figured no biggie maybe an app got messed up or something, and so I told her to back up her pics, exc she wanted off the unit
and I could look at reinstalling the apps or just taking the unit back to factory rom
about a week later it started to reboot more often randomly
and now it is to the point where it will not make it into the rom
now I can make it into the boot selection where I can choose RCK (for the TWRP), USB, or the other 2 options
and I know I can make it into the TWRP tool as well and it does not repeatedly boot from there, so i'm sure its a rom issue and not a hardware issue, but I could still be wrong
the unit is currently charging so I have not had a chance to try for the usb connection option or anything else yet
hopefully the usb option will work so I can try to recover the pics, exc before taking the unit back to factory
now in the process I know I have unlocked the unit, I believe I have done the min root but have not fully rooted the unit if that makes sense
so i'm just wondering if I will half to fully root (and how do I do that if I do since I can't make it into a rom)
how do I clear the rom that has gone bad
how do I install a factory rom (how do I tell which is the lastest rom, and which one is needed for my unit)
and then I should be good from there
if you need any more info please let me know and maybe some instructions on how to get to that info
in the process of putting the energy rom onto it, I spent a week of reading, researching, and figuring out which way would probably be the safest for me to do, plus the easiest for me to understand
now that it has been so long I have been reading and researching again, I just need that nudge that gets me in the right direction
i'm sure i'm not the only one that has had this issue with a rom, and i'm also sure there is a guide out there already that goes over how to put it back to a factory rom
just for some reason i'm either over looking it or not finding it
Click to expand...
Click to collapse
Its very simple to return to stock. But first, do you have the tablets drivers installed on your pc?
---------- Post added at 06:16 AM ---------- Previous post was at 06:14 AM ----------
And do you have fastboot?

if you are talking about the android sdk tools
yes that is installed on my computer from the first time I did the tablet
and I went ahead and did the updates for it as well
and tried plugging the unit in with the fastboot and confirm it shows up in device manager

bump
hope you didn't forget about me crazynitro

allusion said:
bump
hope you didn't forget about me crazynitro
Click to expand...
Click to collapse
sorry, i got caught up with some school work. i could walk you through the process, if you want.

if you could please, any links, post, exc you want me to read ahead of time please post
anything you need me to verify or check on please let me know
gf starting to be up my butt about her tablet, lol
but yes any help is more then appreciated

allusion said:
if you could please, any links, post, exc you want me to read ahead of time please post
anything you need me to verify or check on please let me know
gf starting to be up my butt about her tablet, lol
but yes any help is more then appreciated
Click to expand...
Click to collapse
Lol okay. Theres actually a more simple way.
1. Download the latest asus firmware.
2. Extract the zip file
3. Flash it like a normal rom.
If you cant use this method then you'll have to use fastboot. Here's a link but if you need any help, just ask : http://www.androidauthority.com/transformer-pad-tf300t-restore-stock-firmware-108016/

how do I check the sku according to that guide if i'm not able to load into the android os
that only shows if you can load into the os
would the box have that?

or now looking at the options that I should assume its is a US sku lol

crazynitro said:
3. Flash it like a normal rom.
Click to expand...
Click to collapse
lol, and how do I do that using the twrp?
can't find any detailed instructions on using twrp on flashing a rom, especially the stock one
i'm sure there is a set of detailed instructions cause I swore I saw one once
but i'm not able to find it again
cause I thought besides using the install part there were things I had to clear as well for it to work
oh and yeah the download link for fastboot is no long working in the one guide you gave me to follow so not sure if I already have what it is talking about

allusion said:
lol, and how do I do that using the twrp?
can't find any detailed instructions on using twrp on flashing a rom, especially the stock one
i'm sure there is a set of detailed instructions cause I swore I saw one once
but i'm not able to find it again
cause I thought besides using the install part there were things I had to clear as well for it to work
oh and yeah the download link for fastboot is no long working in the one guide you gave me to follow so not sure if I already have what it is talking about
Click to expand...
Click to collapse
Its simple lol. When you download the firmware from asus, its usually in a .zip form. In it, there is another zip file. Copy that zip file onto your tablet and flash it with twrp.

crazynitro said:
Its simple lol. When you download the firmware from asus, its usually in a .zip form. In it, there is another zip file. Copy that zip file onto your tablet and flash it with twrp.
Click to expand...
Click to collapse
what about having to clear anything? I could of swore the instructions showed going to 2 or 3 spots for clearing data or info or something from the unit

allusion said:
what about having to clear anything? I could of swore the instructions showed going to 2 or 3 spots for clearing data or info or something from the unit
Click to expand...
Click to collapse
Yes. You have to do a factory reset first.

and how do I do that lol, and what happens when I don't do that first

is this tablet now dead since the step of doing the reset was not complete? cause now I can not access twrp and it just sits there with the asus logo and the swirling dots
when I try to access the usb option all I have is rck, android and wipe, rck just gives a failure shortly after trying

allusion said:
lol, and how do I do that using the twrp?
can't find any detailed instructions on using twrp on flashing a rom, especially the stock one
i'm sure there is a set of detailed instructions cause I swore I saw one once
but i'm not able to find it again
cause I thought besides using the install part there were things I had to clear as well for it to work
oh and yeah the download link for fastboot is no long working in the one guide you gave me to follow so not sure if I already have what it is talking about
Click to expand...
Click to collapse
If you want to use twrp, download the us stock firm ware. when you open it, you'll see a file that looks like this: "US_epad-user-10.6.1.15.3". copy that file onto your tablet and flash it like a normal rom. haha
For fastboot, if you have the android sdk, then you already have fastboot so you dont have to download fastboot again.
---------- Post added at 03:36 PM ---------- Previous post was at 03:32 PM ----------
allusion said:
is this tablet now dead since the step of doing the reset was not complete? cause now I can not access twrp and it just sits there with the asus logo and the swirling dots
when I try to access the usb option all I have is rck, android and wipe, rck just gives a failure shortly after trying
Click to expand...
Click to collapse
if you tried installing the newest firmware, you wont see the usb icon when you press power and volume+ it automatically enters fastboot. you dont have to select anything
---------- Post added at 03:39 PM ---------- Previous post was at 03:36 PM ----------
allusion said:
and how do I do that lol, and what happens when I don't do that first
Click to expand...
Click to collapse
if you cant enter twrp, then you dont have to worry about the factory reset you can flash the stock rom using fastboot.

Help, can't boot into Recovery, TWRP failed, No ROM, MAC

HELP!
i can't boot into recovery!
i was wiping data to flash another rom, and TWRP quit on me. so no rom on it.
only will go to the boot screen
twrp fails.
whenever I try to go into recovery, it stops at the TWRP logo and turn back off.
I can't get into any TWRP menus, etc.
then goes to the Samsung screen, w/ "booped by BMS" but freezes there.
i don't have a PC, so i can't push something to it through ODIN.
what can i do?
can i use CASUAL? somehow?
I have a MAC. Verizon Galaxy s3. Can Casual push a rom onto it?
I read that i can use ADB, but I need to be able to boot into recovery, right?
If i need to borrow a windows computer, I guess I'll have to, just wanted to knwo if there was a mac way to fix it.
thank you for any suggestions.
~john Huie

I don't think there's a mac version of Odin. You may have to borrow a pc to Odin back and reroot and unlock. I just bootcamped my mac for phone software and various windows programs I can't do without. It's not hard at all you just need a copy of windows. But I have to ask your mac is Intel right?
Sent from my SCH-I535 using Tapatalk 4

hey, yes, intel mac.
I can borrow a PC today, I guess I can use ODIN to push a working recovery back on, right? using this thread?
http://forum.xda-developers.com/showthread.php?t=2046439
that's how i rooted the phone.
I would like to get it working on my MAC, no other computer necessary.
Unless there is a way for me to use ADB w/o a recovery.

funkpod said:
hey, yes, intel mac.
I can borrow a PC today, I guess I can use ODIN to push a working recovery back on, right? using this thread?
http://forum.xda-developers.com/showthread.php?t=2046439
that's how i rooted the phone.
I would like to get it working on my MAC, no other computer necessary.
Unless there is a way for me to use ADB w/o a recovery.
Click to expand...
Click to collapse
Someone else is going to have to answer that as that's beyond me. I was thinking maybe you could Odin back to stock, make sure your phone is okay then maybe try the casual method to root, unlock and flash recovery.

TheAfroSamurai said:
Someone else is going to have to answer that as that's beyond me. I was thinking maybe you could Odin back to stock, make sure your phone is okay then maybe try the casual method to root, unlock and flash recovery.
Click to expand...
Click to collapse
There is an Odin alternative for the mac called Heimdall but getting it to work is hit or miss.

jmxc23 said:
There is an Odin alternative for the mac called Heimdall but getting it to work is hit or miss.
Click to expand...
Click to collapse
FIXED!!! PHEW!!!
yes, all i did was flash the recovery through ODIN. and bam.
thought of Heimdall, but my mother-in-law's old PC still reliable!
okay.
THANK YOU for everyone's help. seriously.
newfound respect for ODIN and Windows.
Trying out PACMAN rom now!

I believe I read where they were using a 16gb sdcard to boot instead of jtag. You might be able to flash the recovery via that setup. I'll see if I can find the link. (it was in Sprint but said and was tested on Verizon).
Cruzin' tha Galaxy SIII via Obsessed Rom / "INAPPROPRIATE" Kernel
---------- Post added at 08:22 PM ---------- Previous post was at 08:15 PM ----------
bbolton_98 said:
I believe I read where they were using a 16gb sdcard to boot instead of jtag. You might be able to flash the recovery via that setup. I'll see if I can find the link. (it was in Sprint but said and was tested on Verizon).
Cruzin' tha Galaxy SIII via Obsessed Rom / "INAPPROPRIATE" Kernel
Click to expand...
Click to collapse
edit:
http://forum.xda-developers.com/showthread.php?p=43724690
Here's the link. It would be worth a shot to ask over there and see if they have any ideas about just flashing recovery via this setup and see what they say. It looks like you might still have to run ubunbtu via live or something similar. Good luck
Cruzin' tha Galaxy SIII via Obsessed Rom / "INAPPROPRIATE" Kernel

funkpod said:
FIXED!!! PHEW!!!
yes, all i did was flash the recovery through ODIN. and bam.
thought of Heimdall, but my mother-in-law's old PC still reliable!
okay.
THANK YOU for everyone's help. seriously.
newfound respect for ODIN and Windows.
Trying out PACMAN rom now!
Click to expand...
Click to collapse
Glad you got it working, if you haven't done so yet backup your IMEI/ERI..those few minutes to do that will be well worth it.

thanks, guys. yeah, now pacman rom. I wonder why twrp failed like that. WEIRD. maybe CWMR is more reliable? anyone else have that problem?

bbolton_98 said:
I believe I read where they were using a 16gb sdcard to boot instead of jtag. You might be able to flash the recovery via that setup. I'll see if I can find the link. (it was in Sprint but said and was tested on Verizon).
Cruzin' tha Galaxy SIII via Obsessed Rom / "INAPPROPRIATE" Kernel
---------- Post added at 08:22 PM ---------- Previous post was at 08:15 PM ----------
edit:
http://forum.xda-developers.com/showthread.php?p=43724690
Here's the link. It would be worth a shot to ask over there and see if they have any ideas about just flashing recovery via this setup and see what they say. It looks like you might still have to run ubunbtu via live or something similar. Good luck
Cruzin' tha Galaxy SIII via Obsessed Rom / "INAPPROPRIATE" Kernel
Click to expand...
Click to collapse
That is only meant for hard bricked phones. The op still have his hardware working so this isn't needed. Also if you read some of the posts there its meant to get you back to download mode as the img file only contains files needed to access download and the stock recovery.

funkpod said:
thanks, guys. yeah, now pacman rom. I wonder why twrp failed like that. WEIRD. maybe CWMR is more reliable? anyone else have that problem?
Click to expand...
Click to collapse
I don't know if one recovery is better than the other. Depends on the person. I use TWRP and don't have any issues at all.
Sent from my SCH-I535 using Tapatalk 4

How to downgrade nvidia shield from 4.4.2 to 4.3?

Hi guys. I want to know how to do what the title says cause the new update sucks really bad. Games fps is lower, can't use SD card anymore, full screen is not really full screen anymore. Well yeah thanks

ALLEN2 said:
Hi guys. I want to know how to do what the title says cause the new update sucks really bad. Games fps is lower, can't use SD card anymore, full screen is not really full screen anymore. Well yeah thanks
Click to expand...
Click to collapse
GO here http://forum.xda-developers.com/showthread.php?t=2661067
Follow the instructions on getting the bootloader unlocked and getting rooted by flashing CWM.. after all those steps. re open the program and choose Flash BONE STOCK. You will be right back in Android 4.3 update 68 i think from Nvidia. which is right back to when you purchase it from Gamestop. Get it quick before the developer update it to The latest update which is the one your on, 4.4.2.
As long as you follow the instructions and get the Universal Ghost Driver installed properly. It works. I've tried this out already, I em back on Android 4.3..

DJFresh82 said:
GO here http://forum.xda-developers.com/showthread.php?t=2661067
Follow the instructions on getting the bootloader unlocked and getting rooted by flashing CWM.. after all those steps. re open the program and choose Flash BONE STOCK. You will be right back in Android 4.3 update 68 i think from Nvidia. which is right back to when you purchase it from Gamestop. Get it quick before the developer update it to The latest update which is the one your on, 4.4.2.
As long as you follow the instructions and get the Universal Ghost Driver installed properly. It works. I've tried this out already, I em back on Android 4.3..
Click to expand...
Click to collapse
Alright, do I loose all my data and is there I way I can update to the update before this 4.4.2 update?

Note CMW development its dead and dont know what happens if you install CMW recovery on kiktat,try to install another recovery.

ALLEN2 said:
Alright, do I loose all my data and is there I way I can update to the update before this 4.4.2 update?
Click to expand...
Click to collapse
unfortunately you will lose everything if you go through with this method unless most of your personal stuff is on the MicroSD Card, as it reflashes your original clean untouched recovery... Maybe in the near future there might be another simpler method.
---------- Post added at 02:47 AM ---------- Previous post was at 02:43 AM ----------
alexei_gp said:
Note CMW development its dead and dont know what happens if you install CMW recovery on kiktat,try to install another recovery.
Click to expand...
Click to collapse
It boots up to CWM and it seems to be working normal as far as doing a nandroid backup to MicroSD.. I haven't encountered any issues yet when i had KitKat.. I had the CWM running normal as far as I can tell. Well i'm still sort of a newbie, here you guys are the experts..... thanks for the great dev for another great device

DJFresh82 said:
unfortunately you will lose everything if you go through with this method unless most of your personal stuff is on the MicroSD Card, as it reflashes your original clean untouched recovery... Maybe in the near future there might be another simpler method.
---------- Post added at 02:47 AM ---------- Previous post was at 02:43 AM ----------
It boots up to CWM and it seems to be working normal as far as doing a nandroid backup to MicroSD.. I haven't encountered any issues yet when i had KitKat.. I had the CWM running normal as far as I can tell. Well i'm still sort of a newbie, here you guys are the experts..... thanks for the great dev for another great device
Click to expand...
Click to collapse
I m not a dev xDDD when i install CMW recovery on my nvidia shield i have problems to update to 4.3 .Searching on the thread of CMW i realize the CMW recovery its dead , no update no oficial development nothing and the worse you cant download the recovery on that thread,

alexei_gp said:
I m not a dev xDDD when i install CMW recovery on my nvidia shield i have problems to update to 4.3 .Searching on the thread of CMW i realize the CMW recovery its dead , no update no oficial development nothing and the worse you cant download the recovery on that thread,
Click to expand...
Click to collapse
Even though CWM is dead. in order to root using the Shield 1.0 method, CWM is still needed to flash SuperSU.zip.. unless you another method to root, the CWM isn't nessessary to flash. as long as you boot loader is unlocked of course and your rooted. you can use the Bone Stock method, and it will restore the shield back to 4.3.... this is the only way i know of as of now... I'm sure in the near future there might be another simpler method...........

DJFresh82 said:
Even though CWM is dead. in order to root using the Shield 1.0 method, CWM is still needed to flash SuperSU.zip.. unless you another method to root, the CWM isn't nessessary to flash. as long as you boot loader is unlocked of course and your rooted. you can use the Bone Stock method, and it will restore the shield back to 4.3.... this is the only way i know of as of now... I'm sure in the near future there might be another simpler method...........
Click to expand...
Click to collapse
I dont need to use the script SHIELD 1.0, i used minimal adb fastboot to root it using a image root on github,CWM its not required to flash SuperSU.zip

Once you're on kitkat I dont think you can go back to jellybean. I could be totally wrong but I tried going back to 4.3 and it bricked my shield, wouldn't boot. I didn't spend much time on seeing why it happened, so like I said I Could be totally wrong. I could of had bad files for all I know.

alexei_gp said:
I dont need to use the script SHIELD 1.0, i used minimal adb fastboot to root it using a image root on github,CWM its not required to flash SuperSU.zip
Click to expand...
Click to collapse
I didn't say u had to use that SHield 1.0 method to root, I said only if your using that method. I know there are other methods to root. The point I was making is that once your rooted and bootloader unlocked. you can still use shield 1.0 to reflash the update 68 i beleive which is android 4.3.. out of the box state from gamestop.... It worked for me having the same latest kitkat OTA that you have......
---------- Post added at 08:43 PM ---------- Previous post was at 08:31 PM ----------
hexitnow said:
Once you're on kitkat I dont think you can go back to jellybean. I could be totally wrong but I tried going back to 4.3 and it bricked my shield, wouldn't boot. I didn't spend much time on seeing why it happened, so like I said I Could be totally wrong. I could of had bad files for all I know.
Click to expand...
Click to collapse
It does seem like that.. but using SHIELD 1.0.. it worked for me, I'm back on 4.3 update 68 from NVIDIA. Using this mainly for emulators.. I'm sure there will be some type of fix in the near future for kitkat though, when it is, i will update mines back to that...

DJFresh82 said:
I didn't say u had to use that SHield 1.0 method to root, I said only if your using that method. I know there are other methods to root. The point I was making is that once your rooted and bootloader unlocked. you can still use shield 1.0 to reflash the update 68 i beleive which is android 4.3.. out of the box state from gamestop.... It worked for me having the same latest kitkat OTA that you have......
---------- Post added at 08:43 PM ---------- Previous post was at 08:31 PM ----------
It does seem like that.. but using SHIELD 1.0.. it worked for me, I'm back on 4.3 update 68 from NVIDIA. Using this mainly for emulators.. I'm sure there will be some type of fix in the near future for kitkat though, when it is, i will update mines back to that...
Click to expand...
Click to collapse
Ok thats good to know i used fastboot to flash the update 68 files.

you are soo wrong, you arent briked
just set up the ghost drivers on your computer, get fastboot working, download kwonggers toolkit, follow the instructions on screen of your computer to set your shield back to 4.2.2 because the toolkit hasn't been updated and everthing shield is almost as dead as the ouya or worse, so I might just sell the shield from the lack of audience and support and get a bloody snapdragon 801 phone, if NVidia wants to keep this relevant, they need to work with the developer community more, unless shield will die, I have made my choice, now what's yours?

hexitnow said:
Ok thats good to know i used fastboot to flash the update 68 files.
Click to expand...
Click to collapse
That's Awesome.....

mudflap2.0 said:
just set up the ghost drivers on your computer, get fastboot working, download kwonggers toolkit, follow the instructions on screen of your computer to set your shield back to 4.2.2 because the toolkit hasn't been updated and everthing shield is almost as dead as the ouya or worse, so I might just sell the shield from the lack of audience and support and get a bloody snapdragon 801 phone, if NVidia wants to keep this relevant, they need to work with the developer community more, unless shield will die, I have made my choice, now what's yours?
Click to expand...
Click to collapse
I just got the Shield mainly for emulators, so will stick with 4.22 since that is what the device had out of box. Works great and no need to root or any other hassle for the intended use.

Installed TWRP on StraightTalk SCH-S968C Samsung Galaxy S III - now no OS! - resolved

I have a rooted StraightTalk SCH-S968C Samsung Galaxy S III (with the stock AOSP ROM) that I just screwed up. I had used EZ-Recovery to flash TWRP 2.2.0 to the phone. Now TWRP says there is no OS! I can only boot into TWRP - nothing else. It won't even let me power-down the phone. Is there some way I can recover from this, or do I now have a very expensive electronic brick (that runs TWRP)? I have adb installed on my laptop and I know it works, so that's one possible route to recovery. Any help would be much appreciated!

ScottDB said:
I have a rooted StraightTalk SCH-S968C Samsung Galaxy S III (with the stock AOSP ROM) that I just screwed up. I had used EZ-Recovery to flash TWRP 2.2.0 to the phone. Now TWRP says there is no OS! I can only boot into TWRP - nothing else. It won't even let me power-down the phone. Is there some way I can recover from this, or do I now have a very expensive electronic brick (that runs TWRP)? I have adb installed on my laptop and I know it works, so that's one possible route to recovery. Any help would be much appreciated!
Click to expand...
Click to collapse
I'm pretty sure it's possible to return it completely to stock with the COMBINATION_S968CUDUAMH1_S968CTFNAMH1_1304014_REV09_user_low_ship.tar.md5 file through Odin. I just to happen to have the file right here.. small warning though, it's 1.2 gigs.
https://mega.co.nz/#!gRI3DD5L!dRW8ORzfQI5j1JyKHVBTNifomPCXoqL14B9GF4oxvQY

aekel87 said:
I'm pretty sure it's possible to return it completely to stock with the COMBINATION_S968CUDUAMH1_S968CTFNAMH1_1304014_REV09_user_low_ship.tar.md5 file through Odin. I just to happen to have the file right here.. small warning though, it's 1.2 gigs.
https://mega.co.nz/#!gRI3DD5L!dRW8ORzfQI5j1JyKHVBTNifomPCXoqL14B9GF4oxvQY
Click to expand...
Click to collapse
That's the file I am offering to host on my Website, since nobody seems to be able to download it from Dropbox. I'm having trouble downloading it from Mega... Since the file is over 1 GB, Mega insisted I needed to download their extension, but it's not compatible with Firefox 22. I tried Chrome, and Mega says that Chrome on my laptop is "a bit outdated"... sheesh! I'll try and update it.
(added later) - I found a Dropbox link for the file and it's downloading now.
If you want to FTP the file to my Website, let me know by PM and I'll give you the username and password.
I tried using fastboot to install CWM Recovery, but fastboot is eternally "waiting for device" even though it's there (adb can see it).
Aug. 7 - Got the file I needed, but didn't use it since Windows7 would not recognize the phone even after I installed the drivers. (I think it was an issue with automatic updates being disabled...) In the meantime... I tried the button-combo for the bootloader (which I swore I tried the day before and it didn't work), and the phone booted into the bootloader! From there, I pressed "Volume down" to cancel & reboot the phone, and it went into the stock system - it was all still there! First thing I did was immediately use EZ-Recovery to flash CWM 5.8.4.5. - Issue resolved!

Deleted.

ScottDB said:
That's the file I am offering to host on my Website, since nobody seems to be able to download it from Dropbox. I'm having trouble downloading it from Mega... Since the file is over 1 GB, Mega insisted I needed to download their extension, but it's not compatible with Firefox 22. I tried Chrome, and Mega says that Chrome on my laptop is "a bit outdated"... sheesh! I'll try and update it.
(added later) - I found a Dropbox link for the file and it's downloading now.
If you want to FTP the file to my Website, let me know by PM and I'll give you the username and password.
I tried using fastboot to install CWM Recovery, but fastboot is eternally "waiting for device" even though it's there (adb can see it).
Aug. 7 - Got the file I needed, but didn't use it since Windows7 would not recognize the phone even after I installed the drivers. (I think it was an issue with automatic updates being disabled...) In the meantime... I tried the button-combo for the bootloader (which I swore I tried the day before and it didn't work), and the phone booted into the bootloader! From there, I pressed "Volume down" to cancel & reboot the phone, and it went into the stock system - it was all still there! First thing I did was immediately use EZ-Recovery to flash CWM 5.8.4.5. - Issue resolved!
Click to expand...
Click to collapse
Thank you!!!! I just had the same problem. However even when using cwm i get errors in the recovery. Unable to mount anything or do anything besides reboot. Any ideas?

need stock Firmware
Have any idea where i can get this file? Ive bricked my phone too. Durnnit!

iamwaynes said:
Have any idea where i can get this file? Ive bricked my phone too. Durnnit!
Click to expand...
Click to collapse
This is the h1 stock you need. type this in google you should find the download if not I have it.
COMBINATION_S968CUDUAMH1_S968CTFNAMH1_1304014_REV0
Dont use e-z recovery. I had the same problem neither cwm or twrp from ez recovery worked and then cwm said no os on my phine so I flashed that file from download mode and was back to stock.

How did u find a recovery that worked mine is saying the same thing
Sent from my SM-N900T using Tapatalk

iamwaynes said:
How did u find a recovery that worked mine is saying the same thing
Sent from my SM-N900T using Tapatalk
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=1771398
In that thread go down to method 2 of getting a custom recovery. I downloaded cwm touch from the link there and then installed it with android terminal emulator using the codes that it says to type in. I tried to look up that stock rom but I didnt find it. Its on the forum somewhere in a thread about how to root the straight talk s3 and how first you need to download and flash the h1 baseband stock rom

Thanks I found the stock rom fixing it now.
Sent from my SM-N900T using Tapatalk

iamwaynes said:
Thanks I found the stock rom fixing it now.
Sent from my SM-N900T using Tapatalk
Click to expand...
Click to collapse
Ok I've re rooted and tried to install recovery. Odin put it in wrong place. Says no operating system . What now?
Sent from my SM-N900T using Tapatalk

iamwaynes said:
Ok I've re rooted and tried to install recovery. Odin put it in wrong place. Says no operating system . What now?
Sent from my SM-N900T using Tapatalk
Click to expand...
Click to collapse
Have you gotten recovery installed and straightened out yet?
Let me know if you need some help, tell me where you're at and what you've got going on with what you have.

I returned phone to stock. The recovery wasn't in the right place obviously. So that's where I am . Stuck back at stock. Thanks for any help you can give.
Sent from my SM-N900T using Tapatalk

iamwaynes said:
I returned phone to stock. The recovery wasn't in the right place obviously. So that's where I am . Stuck back at stock. Thanks for any help you can give.
Sent from my SM-N900T using Tapatalk
Click to expand...
Click to collapse
Are you on stock not rooted or you are rooted?
Do you have stock recovery or custom.
I can get you to wherever you need or want. Tell me what you need or where you'd like to be.

Droidriven said:
Are you on stock not rooted or you are rooted?
Do you have stock recovery or custom.
I can get you to wherever you need or want. Tell me what you need or where you'd like to be.
Click to expand...
Click to collapse
I have combined 2 s3's to make one good one. This is the proper thread for the model of the chipset. The phone has been worked on buy someone who only thought they were a genious. I've found traces and from surfing the forums I'm pretty sure I know what they did even. I'm gonna grab these stock images and flash back to stock. I just wanted to put a word in now to see how dead this thread is. BTW just for the record easy safe root is achievable with safroot for Att g s 4. I've confirmed that. Root is no issue. Modem drivers are jacked up. I want what I have now with WiFi in tact and custom recovery. Just wanted to get the word in in case I hit a wall with recovery as I am now before the flash to stock. Thanks in advance for any help. Sorry for the ramble
---------- Post added at 07:23 AM ---------- Previous post was at 07:03 AM ----------
ScottDB said:
That's the file I am offering to host on my Website, since nobody seems to be able to download it from Dropbox. I'm having trouble downloading it from Mega... Since the file is over 1 GB, Mega insisted I needed to download their extension, but it's not compatible with Firefox 22. I tried Chrome, and Mega says that Chrome on my laptop is "a bit outdated"... sheesh! I'll try and update it.
(added later) - I found a Dropbox link for the file and it's downloading now.
If you want to FTP the file to my Website, let me know by PM and I'll give you the username and password.
I tried using fastboot to install CWM Recovery, but fastboot is eternally "waiting for device" even though it's there (adb can see it).
Aug. 7 - Got the file I needed, but didn't use it since Windows7 would not recognize the phone even after I installed the drivers. (I think it was an issue with automatic updates being disabled...) In the meantime... I tried the button-combo for the bootloader (which I swore I tried the day before and it didn't work), and the phone booted into the bootloader! From there, I pressed "Volume down" to cancel & reboot the phone, and it went into the stock system - it was all still there! First thing I did was immediately use EZ-Recovery to flash CWM 5.8.4.5. - Issue resolved!
Click to expand...
Click to collapse
Does anyone have a good link for h1 stock. All the links I can find including aa51 are dead. I need to go stock to fix the modem. I can handle everything from there I just need stock and I've trolled XDA , aa51, and several others. All links are dead. Probably for a long long time . any help is greatly appreciated
---------- Post added at 07:42 AM ---------- Previous post was at 07:23 AM ----------
sazendrak said:
I have combined 2 s3's to make one good one. This is the proper thread for the model of the chipset. The phone has been worked on buy someone who only thought they were a genious. I've found traces and from surfing the forums I'm pretty sure I know what they did even. I'm gonna grab these stock images and flash back to stock. I just wanted to put a word in now to see how dead this thread is. BTW just for the record easy safe root is achievable with safroot for Att g s 4. I've confirmed that. Root is no issue. Modem drivers are jacked up. I want what I have now with WiFi in tact and custom recovery. Just wanted to get the word in in case I hit a wall with recovery as I am now before the flash to stock. Thanks in advance for any help. Sorry for the ramble
---------- Post added at 07:23 AM ---------- Previous post was at 07:03 AM ----------
Does anyone have a good link for h1 stock. All the links I can find including aa51 are dead. I need to go stock to fix the modem. I can handle everything from there I just need stock and I've trolled XDA , aa51, and several others. All links are dead. Probably for a long long time . any help is greatly appreciated
Click to expand...
Click to collapse
Finally found it here
https://forum.xda-developers.com/showthread.php?t=2516498&page=28

PLEASE HELP total noob and bricked my S6

Hi guys
So I'm a total noob (have very little technical knowledge regarding phones
I kind of stupidly tried to root my S6 (G920FXXU2COH2) this evening and now it is soft bricked
I have tried flashing stock android to un-brick it but it didn't work ( Odin showed a FAIL message and my phone displayed system rev. check fail device: 2 binary 1
My phone is now stuck on the boot screen showing the message RECOVER IS NOT SEANDROID ENFORCING
Please can someone help me unbrick this thing, using the simplest language possible, thanks so much in advance

First of all, did you read everything before rooting your phone?

paddy_dixon said:
Hi guys
So I'm a total noob (have very little technical knowledge regarding phones
I kind of stupidly tried to root my S6 (G920FXXU2COH2) this evening and now it is soft bricked
I have tried flashing stock android to un-brick it but it didn't work ( Odin showed a FAIL message and my phone displayed system rev. check fail device: 2 binary 1
My phone is now stuck on the boot screen showing the message RECOVER IS NOT SEANDROID ENFORCING
Please can someone help me unbrick this thing, using the simplest language possible, thanks so much in advance
Click to expand...
Click to collapse
Hi, I got the same error a couple of days ago when I bricked my phone and it was because of the ROM I downloaded. If you tried to flash a 5.0.2 ROM you'll get that error, flash a 5.1.1 instead and it should go fine

emcardle660 said:
Hi, I got the same error a couple of days ago when I bricked my phone and it was because of the ROM I downloaded. If you tried to flash a 5.0.2 ROM you'll get that error, flash a 5.1.1 instead and it should go fine
Click to expand...
Click to collapse
Okay thanks, as I say I'm totally new to all this, so how do I do this? Thanks again

theking_13 said:
First of all, did you read everything before rooting your phone?
Click to expand...
Click to collapse
If I'm honest, I sorta rushed it, but after going back over everything I still can't see where I messed up

paddy_dixon said:
Okay thanks, as I say I'm totally new to all this, so how do I do this? Thanks again
Click to expand...
Click to collapse
Just download the stock ROM, but make sure its running the version 5.1.1 and NOT the version 5.0.2.
Then just flash that ROM through odin and it should be fine.
Here's the website I got my ROM off, took a while to download though... http://forum.youmobile.org/downloads/?cat=42;PHPSESSID=0fa1c4db175a41a315299d62e08997d8
Also, how did you try to root? Just curious

emcardle660 said:
Just download the stock ROM, but make sure its running the version 5.1.1 and NOT the version 5.0.2.
Then just flash that ROM through odin and it should be fine.
Here's the website I got my ROM off, took a while to download though...
Also, how did you try to root? Just curious
Click to expand...
Click to collapse
Awesome, think I've found the right firmware, will keep this thread updated on how it goes, thanks so much for the help!!
Tried rooting with Odin and CF root

paddy_dixon said:
Awesome, think I've found the right firmware, will keep this thread updated on how it goes, thanks so much for the help!!
Tried rooting with Odin and CF root
Click to expand...
Click to collapse
Let me know how it goes!
And best using Unikernel to root, I used it and only takes a minute or 2, but first just get the phone itself sorted

emcardle660 said:
Let me know how it goes!
And best using Unikernel to root, I used it and only takes a minute or 2, but first just get the phone itself sorted
Click to expand...
Click to collapse
Still didn't work! really losing hope now
What are the options I should have selected in Odin?

paddy_dixon said:
Still didn't work! really losing hope now
What are the options I should have selected in Odin?
Click to expand...
Click to collapse
Auto reboot and F reset time... Are you loading the ROM into 'AP' in Odin? And what version are you using? I used odin 3.10.6

Flash twrp and install a custom rom.i screwed mine like you, I don't think you'll be able to flash stock back. So just get a rom
---------- Post added at 12:22 PM ---------- Previous post was at 12:14 PM ----------
emcardle660 said:
Auto reboot and F reset time... Are you loading the ROM into 'AP' in Odin? And what version are you using? I used odin 3.10.6
Click to expand...
Click to collapse
It's not called a rom. It's called stock firmware. Don't get him confused.

shotgun10ga said:
Flash twrp and install a custom rom.i screwed mine like you, I don't think you'll be able to flash stock back. So just get a rom
---------- Post added at 12:22 PM ---------- Previous post was at 12:14 PM ----------
It's not called a rom. It's called stock firmware. Don't get him confused.
Click to expand...
Click to collapse
Technically everything you flash wether it is over Odin or recovery is called a rom. Only the Stock ones provided by the manufacturer are called firmware. You could also say custom firmware for custom roms.
But no confusion here

Alright everyone, after trying to flash the stock ROM a few times it just suddenly decided to work! Thanks so much for all of your help!

paddy_dixon said:
Alright everyone, after trying to flash the stock ROM a few times it just suddenly decided to work! Thanks so much for all of your help!
Click to expand...
Click to collapse
Finally! Haha at least you got it working eventually

Yeah! Sorry hate to ask more of you, but do I use Odin with unikernel? And is there anything else I need to know? Really don't want to brick it again! Haha, thanks in advance

paddy_dixon said:
Yeah! Sorry hate to ask more of you, but do I use Odin with unikernel? And is there anything else I need to know? Really don't want to brick it again! Haha, thanks in advance
Click to expand...
Click to collapse
Yup it's EXACTLY the same, only unikernel will only take a minute to do compared to a full ROM Here's the link to the one I used https://www.androidfilehost.com/?fid=24052804347784025
Don't think there's anything else other than be careful lol