Database Info

Bad Moto Milestone .sbf FLASH; stuck in BOOTLOADER mode

I flashed my stock. 2.1 Milestone (rooted) preparing it for froyo. Apparently the .sbf was corrupt or wrong;
GOT_TELUS_2_2_1FULL.sbf
I am told the correct sbf is;
BL_9078_GOOD_sholes_HS_Consumer_replacer.sbf\BL_90 78_umts_sholes_HS_Consumer_replacer.sbf.
- Now It’s stuck in bootloader mode
-RSD Lite seems to recognize phone but the “Start” button remains disabled, grey, it can’t be pushed (with either .sbf file.)
-I’ve loaded a fresh copy of RSD Lite v5.0 (previously had v4.7). Both behave the same; the start button is disabled.
I want to save this phone. I'm looking for alternative tools or methods to ultimately flash the proper .SBF…Help please!!!
BOOTLOADER SCREEN BELOW
PHP:
Bootloader
90.74
Err:A5,69,35,00,27
Battery OK
OK to Program
Transfer Mode:
USB
RSD LITE SCREEN BELOW
PHP:
IMEI/ESN/MEID: N / A
Technology: N / A
Software Version: N / A
Flex Version: N / A
Bootloader Version: v0x009074
DRM Version: N / A
AP Die ID: 06a0010c60720304000000000400
BP Die ID: 0000000000000000000000000000
AP Public ID: 4bd4854c5cb58e173025f2751e09441b44fa681f
BP Public ID: 0000000000000000000000000000000000000000
-----------------------------------------------------------------------
Model Port No Port Type IMEI/ESN/MEID Status
S Flash OMAP3430 1 USB N/A connected
(I’ve successfully flashed my other Millstone an many other phones)
Any help is greatly appreciated,
PK

Soft-bricked atrix help plzz

i am stuck at this screen and my phone not charging.
I tryed to root my atrix and I was using unlock_v4.2, and it keep saying waiting for device. Now i am stuck
at this screen. plzz help me.
SVF: 105:1:2
Failed to boot 0x1000
No OS detected, going into RSD mode in 5 seconds
Press a key to stop count down
Available Modes are:
1 RSD
2 Fastboot
3 NvFlash
4 BP HW Bypass RSD
5 BP HW Bypass QC Dload
6 BP HW Diag & boot AP
7 BP HW Bypass BP only
8 BP SW Bypass RSD
9 Andoid Recovery
10 Boot Andoid (No BP)
11 Device UID
12 console=tty50,115200n8
13 Early USB Enumeration
14 BP Tools
------------------------------
Vol Up to select, Vol Down for next choice
Current choice is mode:
RSD
Starting Fastboot protocol support

Brandon25k said:
i am stuck at this screen and my phone not charging.
I tryed to root my atrix and I was using unlock_v4.2, and it keep saying waiting for device. Now i am stuck
at this screen. plzz help me.
Click to expand...
Click to collapse
Atrix 4G/ Atrix HD /Atrix 2 what's yours ?
you have to flash a stock .sbf file/rom
Identify your device model and post in right thread find it from Menu choose Devices by OS or Manufacturer
post here if I can help.. at least post here details how you solved that !
to flash a stock ROM you have to do something like that
1. install RSDLite and driver package
2. Power down your phone
3. On your phone hold vol up (??) and power till you see RSD at the top of the screen
4. Launch RSDLite on PC
5. Load SBF file
6. Plug your device into your computer RSDLite should recognize your phone right away if you installed the drivers
7. Press the “Start” button
8. it takes a while...will reboot a couple times (??)

ruscan.calin said:
Atrix 4G/ Atrix HD /Atrix 2 what's yours ?
you have to flash a stock .sbf file/rom
Identify your device model and post in right thread find it from Menu choose Devices by OS or Manufacturer
post here if I can help.. at least post here details how you solved that !
to flash a stock ROM you have to do something like that
1. install RSDLite and driver package
2. Power down your phone
3. On your phone hold vol up (??) and power till you see RSD at the top of the screen
4. Launch RSDLite on PC
5. Load SBF file
6. Plug your device into your computer RSDLite should recognize your phone right away if you installed the drivers
7. Press the “Start” button
8. it takes a while...will reboot a couple times (??)
Click to expand...
Click to collapse
it is atrix 4g,i dont know the model

Brandon25k said:
it is atrix 4g,i dont know the model
Click to expand...
Click to collapse
You have it. The model is the Atrix 4G. There's a forum for that where you'll get a lot more help.
(Btw, model number is MB860)
Sent from my MB508 using xda premium

Brandon25k said:
it is atrix 4g,i dont know the model
Click to expand...
Click to collapse
ok now enter here and read more and ask them if you don't understand I can't guide you because somebody made it better than me

thank you all for your help. i have fixed it..
I do have one more favor. the atrix is 4.5.141
how do i root it?

Brandon25k said:
thank you all for your help. i have fixed it..
I do have one more favor. the atrix is 4.5.141
how do i root it?
Click to expand...
Click to collapse
again ? well ..take care...:laugh: why not to read that thread ...and bookmark it !
if you can't wait read this http://forum.xda-developers.com/showthread.php?t=803682
it depends of what you have now flashed !!
how did you solve it ?

I used RSDlite. and used
1FF-olympus-user-2.3.6-4.5.141-111212-release-keys-signed-ATT-US-GAS_NA_OLPSGBATTSPE_P012.sbf
to flash it back to the stock so it would become unsoft-bricked.
thank you for all your help. I just hope that this time i dont soft brick it again.

Xoom 2 italian tim don't boot

i tried to root my xoom 2 tim - mz616-32 but i made a ""little"" confusion! now the device don't boot and i see only:
ap fastboot flash mode (s) (flash failure)
0a.6c (sha-c79fifc, 2011-12-19 11:35:56)
eMMc Info Size 32g
Device is LOCKED, Status Code:0
Battery: ok
Ok to program
Connect USB
Data Cable
Can someone help me (step by step) how i can fix this and give a new life to my NEW Xoom 2?
i try with android-sdk but return the error > basttery LOW
Thank you sooooo much!!!

same
same problem... :/

[Q] My Razr HD is going to die...

Recently, I unlocked my bootloader because I want to root my HD. Actually, I did it.
However, when I use this application to downgrade my HD from 4.1.2 to 4.0.4, somethings happened.
The CMD showed that it was successful but my HD just stuck in the bootloader mode.
Every time I turn on my HD, it came into the bootloader mode(it's bootloader mode, right?I'm not sure..) And no response. After a few minutes, it came back to the bootloader mode again. My HD just loop and loop.
I tried to type out the situation: (because I have no phone to use)
My HD shows that in a black wallpaper with some white words:
AP Fastboot Flash Mode (S)
10.98(*) (sla-5b608bc, 2012-11-13 20:26:57)
eMMC Info: Size 16GB
Device is UNLOCKED, Status Code:3
Battery OK
Transfer Mode:
USB Connected
Fastboot Reason: Flash Failure
usb connected
Actually, I didn't root my HD since I cannot find a way to root my 4.1.2 HD. I tried to connect with the RSD lite 6.0. It shows N/A for all of the in info about my HD...
I really hope that someone can help me with this situation...I just bought it 2days only...s
Thanks so much

hugolam said:
Recently, I unlocked my bootloader because I want to root my HD. Actually, I did it.
However, when I use this application to downgrade my HD from 4.1.2 to 4.0.4, somethings happened.
The CMD showed that it was successful but my HD just stuck in the bootloader mode.
Every time I turn on my HD, it came into the bootloader mode(it's bootloader mode, right?I'm not sure..) And no response. After a few minutes, it came back to the bootloader mode again. My HD just loop and loop.
I tried to type out the situation: (because I have no phone to use)
My HD shows that in a black wallpaper with some white words:
AP Fastboot Flash Mode (S)
10.98(*) (sla-5b608bc, 2012-11-13 20:26:57)
eMMC Info: Size 16GB
Device is UNLOCKED, Status Code:3
Battery OK
Transfer Mode:
USB Connected
Fastboot Reason: Flash Failure
usb connected
Actually, I didn't root my HD since I cannot find a way to root my 4.1.2 HD. I tried to connect with the RSD lite 6.0. It shows N/A for all of the in info about my HD...
I really hope that someone can help me with this situation...I just bought it 2days only...s
Thanks so much
Click to expand...
Click to collapse
Do you have an XT925 or XT926 (Verizon)? If you have an XT925, flash your carrier fastboot file using rsdlite, then check the development thread for the rooting package you can use.
If you have an xt926, you're out of luck, we're still waiting for a way to root that one. Either way, you'll need to fastboot your phone back to stock. If you have questions on using fastboot, check my tutorial in the general forum.
Sent from my XT925 using Tapatalk 2

[Q] Droid Razr M Stuck at AP Fastboot Flash mode Rooted

Well, hello everyone
I was hoping it would not come to this, but this is a dire emergency. I am sort of new to this as well.
My Droid Razr M or (xt907) was boring so I rooted it. After doing so I wanted to look through some settings and stuff to see what it could do. I tried to add partitions to my sd card along the line and when I did so I must have chosen the wrong place, even though it said SD and it did not crash when i did whatever it was. I was using an app to make partitions I forget the name, but when I did so it asked to restart and after it did it showed the AP fastboot Flash mode screen
this is what it shows exactly...
-------------------------------------------------------------------
Device is LOCKED, Status Code: 0
Battery OK
Transfer mode:
USB Connected
Failed to hab check for gpt_main: 0x35
Failed to hab check for gpt_backup: 0x35
failed to load GPT
CID Read Failure
Invalid CID status 0x69
No SP partition found
-----------------------------------------------
I have no clue what to do, and I really need my phone. I dont have any knowledge of android programing.
Someone please just help me.

magranger18 said:
Well, hello everyone
I was hoping it would not come to this, but this is a dire emergency. I am sort of new to this as well.
My Droid Razr M or (xt907) was boring so I rooted it. After doing so I wanted to look through some settings and stuff to see what it could do. I tried to add partitions to my sd card along the line and when I did so I must have chosen the wrong place, even though it said SD and it did not crash when i did whatever it was. I was using an app to make partitions I forget the name, but when I did so it asked to restart and after it did it showed the AP fastboot Flash mode screen
this is what it shows exactly...
-------------------------------------------------------------------
Device is LOCKED, Status Code: 0
Battery OK
Transfer mode:
USB Connected
Failed to hab check for gpt_main: 0x35
Failed to hab check for gpt_backup: 0x35
failed to load GPT
CID Read Failure
Invalid CID status 0x69
No SP partition found
-----------------------------------------------
I have no clue what to do, and I really need my phone. I dont have any knowledge of android programing.
Someone please just help me.
Click to expand...
Click to collapse
Razr M forum - http://forum.xda-developers.com/droid-razr-m?nocache=1&z=2858141673778650. You need try to reflash stock rom via RSD Lite.

turffe said:
Razr M forum - http://forum.xda-developers.com/droid-razr-m?nocache=1&z=2858141673778650. You need try to reflash stock rom via RSD Lite.
Click to expand...
Click to collapse
I have tried this, but when I plug my phone to the PC and open the program it cannot find my phone.

magranger18 said:
I have tried this, but when I plug my phone to the PC and open the program it cannot find my phone.
Click to expand...
Click to collapse
Try install latest RSD Lite + Drivers. I think it's drivers problem or try with other UBS & computer.

I tried this
turffe said:
Try install latest RSD Lite + Drivers. I think it's drivers problem or try with other UBS & computer.
Click to expand...
Click to collapse
I have already tried this, I re downloaded the Motorola drivers from the website and reinstalled the RSD lite. It cannot be a problem with m USB, but I will try this on a new PC and tell you when I do. Thanks.

simillar isssue
turffe said:
Try install latest RSD Lite + Drivers. I think it's drivers problem or try with other UBS & computer.
Click to expand...
Click to collapse
I downloaded flasher tool in my xt907 and installed cwm recovery . Once this was completed , Upon next reboot I get the following screen that I can't get past:
AP Fastboot Flash Mode (S)
10.9B(*) (sha-6114a2, 2014-05-02 00:54:39)
eMMC Info: Size 8GB
Device is Locked, Status Code: 0
Battery OK
Transfer Mode:
USB Connected
Failed to hab check for boot: 0x56
Fastboot Reason: Boot Failure
usb connected
Recovery tool used: Well I don't know now because installing this seems to have wiped my boot loader/boot straper
plz help me as soon as possible
p.s i dont know much about this stuff