i tried to root my xoom 2 tim - mz616-32 but i made a ""little"" confusion! now the device don't boot and i see only:
ap fastboot flash mode (s) (flash failure)
0a.6c (sha-c79fifc, 2011-12-19 11:35:56)
eMMc Info Size 32g
Device is LOCKED, Status Code:0
Battery: ok
Ok to program
Connect USB
Data Cable
Can someone help me (step by step) how i can fix this and give a new life to my NEW Xoom 2?
i try with android-sdk but return the error > basttery LOW
Thank you sooooo much!!!
same
same problem... :/
Related
Hello,
I upgraded my Motorola Razr Model XT910 Android version 2.3.5 to 2.3.6.
Days later I was upgraded to version 4.0 was a mistake, because the system does not start anymore.
The following message appears on a black screen with white letters:
AP Fastboot Flash Mode (S) (Flash Failure)
0A.74
and MMC Info: Seize 16g
To return to normal mode, first press key to power dowsn
Device is LOCKED. Status Code: 0
Battery OK
OK to Program
Connect USB
Data Cable
Does anyone have any solutions to this problem?
spao123 said:
Hello,
I upgraded my Motorola Razr Model XT910 Android version 2.3.5 to 2.3.6.
Days later I was upgraded to version 4.0 was a mistake, because the system does not start anymore.
The following message appears on a black screen with white letters:
AP Fastboot Flash Mode (S) (Flash Failure)
0A.74
and MMC Info: Seize 16g
To return to normal mode, first press key to power dowsn
Device is LOCKED. Status Code: 0
Battery OK
OK to Program
Connect USB
Data Cable
Does anyone have any solutions to this problem?
Click to expand...
Click to collapse
Go to the Motorola razr part of the forums and go to Android development, and find the fastboot files for your region.
Sent from my Maxxed Out Razr!
Hi, first time i am sorry for my bad english.
I have problem with my LG optimus ONE P500. I want to root this phone, so i used manual from link:
http://forum.xda-developers.com/showpost.php?p=15217609&postcount=3
First step, I enabled debubing mode in my phone settings and I connected this phone to notebook over USB cable. I followed steps from manual. After click Download button in LGMDP, phone reboot to emergency mode (green screen) and start. LGMDP recovered and restored NV2 backup and then started upload modificate NV2 to photo (with text something like - burning, but I not sure). After 20 min LGMDP show text: TIMEOUT. Next step I wait a few minutes and disconnected my phone from notebook and manualy rebooted him. If I turn on my phone, Android OS started and worked normaly.
Next step I turn off my phone and use three-button combinatio (home + vol down + power) and phone booted to „fastboot“ mode with text:
Fastboot mode started
udc_start()
Click to expand...
Click to collapse
After connection phone to notebook, display show next lines:
-- suspens --
-- reset --
-- portchange --
-- reset --
-- portchange --
fastboot: processing commands
Click to expand...
Click to collapse
I can´t turn on phone normaly. So I searched manual how to revive a bricked P500 on fastboot mode (link on manual http://forum.xda-developers.com/showthread.php?t=1088046)
But when i write command in windows command line „fastboot erase recovery“ i get message < waiting for device >
Now I trying find and instal a lot of drivers for P500. Windows device manager normal show connected device under Android Phone - USB Modem Phone ADB port. I used LGMobile Support Tool for download driver too. I tried Windows XP and Windows 7, but the same problem. Command line still show <wainting for device>.
I don´t know how to deal problem with communication between phone and notebook. I spend 10 hours with searching how to solve this problem, but all attempts have failed.
Please can you help me?
- Follow the steps mentioned in this Thread :good:
http://forum.xda-developers.com/showthread.php?t=1827723
Phone :- LG Optimus One
Current ROM :- Paranoid Android 2.52 by ByteCode
Recently, I unlocked my bootloader because I want to root my HD. Actually, I did it.
However, when I use this application to downgrade my HD from 4.1.2 to 4.0.4, somethings happened.
The CMD showed that it was successful but my HD just stuck in the bootloader mode.
Every time I turn on my HD, it came into the bootloader mode(it's bootloader mode, right?I'm not sure..) And no response. After a few minutes, it came back to the bootloader mode again. My HD just loop and loop.
I tried to type out the situation: (because I have no phone to use)
My HD shows that in a black wallpaper with some white words:
AP Fastboot Flash Mode (S)
10.98(*) (sla-5b608bc, 2012-11-13 20:26:57)
eMMC Info: Size 16GB
Device is UNLOCKED, Status Code:3
Battery OK
Transfer Mode:
USB Connected
Fastboot Reason: Flash Failure
usb connected
Actually, I didn't root my HD since I cannot find a way to root my 4.1.2 HD. I tried to connect with the RSD lite 6.0. It shows N/A for all of the in info about my HD...
I really hope that someone can help me with this situation...I just bought it 2days only...s
Thanks so much
hugolam said:
Recently, I unlocked my bootloader because I want to root my HD. Actually, I did it.
However, when I use this application to downgrade my HD from 4.1.2 to 4.0.4, somethings happened.
The CMD showed that it was successful but my HD just stuck in the bootloader mode.
Every time I turn on my HD, it came into the bootloader mode(it's bootloader mode, right?I'm not sure..) And no response. After a few minutes, it came back to the bootloader mode again. My HD just loop and loop.
I tried to type out the situation: (because I have no phone to use)
My HD shows that in a black wallpaper with some white words:
AP Fastboot Flash Mode (S)
10.98(*) (sla-5b608bc, 2012-11-13 20:26:57)
eMMC Info: Size 16GB
Device is UNLOCKED, Status Code:3
Battery OK
Transfer Mode:
USB Connected
Fastboot Reason: Flash Failure
usb connected
Actually, I didn't root my HD since I cannot find a way to root my 4.1.2 HD. I tried to connect with the RSD lite 6.0. It shows N/A for all of the in info about my HD...
I really hope that someone can help me with this situation...I just bought it 2days only...s
Thanks so much
Click to expand...
Click to collapse
Do you have an XT925 or XT926 (Verizon)? If you have an XT925, flash your carrier fastboot file using rsdlite, then check the development thread for the rooting package you can use.
If you have an xt926, you're out of luck, we're still waiting for a way to root that one. Either way, you'll need to fastboot your phone back to stock. If you have questions on using fastboot, check my tutorial in the general forum.
Sent from my XT925 using Tapatalk 2
Well, hello everyone
I was hoping it would not come to this, but this is a dire emergency. I am sort of new to this as well.
My Droid Razr M or (xt907) was boring so I rooted it. After doing so I wanted to look through some settings and stuff to see what it could do. I tried to add partitions to my sd card along the line and when I did so I must have chosen the wrong place, even though it said SD and it did not crash when i did whatever it was. I was using an app to make partitions I forget the name, but when I did so it asked to restart and after it did it showed the AP fastboot Flash mode screen
this is what it shows exactly...
-------------------------------------------------------------------
Device is LOCKED, Status Code: 0
Battery OK
Transfer mode:
USB Connected
Failed to hab check for gpt_main: 0x35
Failed to hab check for gpt_backup: 0x35
failed to load GPT
CID Read Failure
Invalid CID status 0x69
No SP partition found
-----------------------------------------------
I have no clue what to do, and I really need my phone. I dont have any knowledge of android programing.
Someone please just help me.
magranger18 said:
Well, hello everyone
I was hoping it would not come to this, but this is a dire emergency. I am sort of new to this as well.
My Droid Razr M or (xt907) was boring so I rooted it. After doing so I wanted to look through some settings and stuff to see what it could do. I tried to add partitions to my sd card along the line and when I did so I must have chosen the wrong place, even though it said SD and it did not crash when i did whatever it was. I was using an app to make partitions I forget the name, but when I did so it asked to restart and after it did it showed the AP fastboot Flash mode screen
this is what it shows exactly...
-------------------------------------------------------------------
Device is LOCKED, Status Code: 0
Battery OK
Transfer mode:
USB Connected
Failed to hab check for gpt_main: 0x35
Failed to hab check for gpt_backup: 0x35
failed to load GPT
CID Read Failure
Invalid CID status 0x69
No SP partition found
-----------------------------------------------
I have no clue what to do, and I really need my phone. I dont have any knowledge of android programing.
Someone please just help me.
Click to expand...
Click to collapse
Razr M forum - http://forum.xda-developers.com/droid-razr-m?nocache=1&z=2858141673778650. You need try to reflash stock rom via RSD Lite.
turffe said:
Razr M forum - http://forum.xda-developers.com/droid-razr-m?nocache=1&z=2858141673778650. You need try to reflash stock rom via RSD Lite.
Click to expand...
Click to collapse
I have tried this, but when I plug my phone to the PC and open the program it cannot find my phone.
magranger18 said:
I have tried this, but when I plug my phone to the PC and open the program it cannot find my phone.
Click to expand...
Click to collapse
Try install latest RSD Lite + Drivers. I think it's drivers problem or try with other UBS & computer.
I tried this
turffe said:
Try install latest RSD Lite + Drivers. I think it's drivers problem or try with other UBS & computer.
Click to expand...
Click to collapse
I have already tried this, I re downloaded the Motorola drivers from the website and reinstalled the RSD lite. It cannot be a problem with m USB, but I will try this on a new PC and tell you when I do. Thanks.
simillar isssue
turffe said:
Try install latest RSD Lite + Drivers. I think it's drivers problem or try with other UBS & computer.
Click to expand...
Click to collapse
I downloaded flasher tool in my xt907 and installed cwm recovery . Once this was completed , Upon next reboot I get the following screen that I can't get past:
AP Fastboot Flash Mode (S)
10.9B(*) (sha-6114a2, 2014-05-02 00:54:39)
eMMC Info: Size 8GB
Device is Locked, Status Code: 0
Battery OK
Transfer Mode:
USB Connected
Failed to hab check for boot: 0x56
Fastboot Reason: Boot Failure
usb connected
Recovery tool used: Well I don't know now because installing this seems to have wiped my boot loader/boot straper
plz help me as soon as possible
p.s i dont know much about this stuff
hey guys I need a huge help i try update my phone with lg flash tool and it stucked. After that i try to boot into download mode again but phone automatic goes to fastboot i see some messages
Code:
[660]fastboot_init()
[670]loading keystore failed status 6 [770] USB init ept @ 0x9f1df000
[790]udc_start()
[900] -- reset --
[910] --portchange --
[950] -- reset --
[950] -- portchange --
[1130] fastboot: processing commands
[2218040] fastboot:getvar:partition-type:boot
i try to install twrp and when i send the command it fails . What happened to my phone? Is there any solution? What i have to do? My computer detects the phone to fastboot mode , so drivers are fine!
bkpaokfc said:
hey guys I need a huge help i try update my phone with lg flash tool and it stucked. After that i try to boot into download mode again but phone automatic goes to fastboot i see some messages
Code:
[660]fastboot_init()
[670]loading keystore failed status 6 [770] USB init ept @ 0x9f1df000
[790]udc_start()
[900] -- reset --
[910] --portchange --
[950] -- reset --
[950] -- portchange --
[1130] fastboot: processing commands
[2218040] fastboot:getvar:partition-type:boot
i try to install twrp and when i send the command it fails . What happened to my phone? Is there any solution? What i have to do? My computer detects the phone to fastboot mode , so drivers are fine!
Click to expand...
Click to collapse
Hi and thank you for using XDA Assist
Unfortunally there isn't device forum for your mentioned device so the better way to ask is to do it here >>> Android Q&A, Help & Troubleshooting
Good luck!