Database Info

Help Me for my Xoom

Hi,
I need help because I've brikked (i think...) my Xoom wifi
When I turn on, on display appear logo Motorola's dual-core and top left:
SOS 0x0002 failed image
Starting RSD mode 2
My iMac (with SDK) does not detect it. I tried to win with RSD Lite 5 but even that is detected by the PC.
Help me please!

I have same problem any one can help please ?

You will need to use the RSD application and use something simular to this:
THIS IS FOR THE VERIZON 3G VERSION:
http://forum.xda-developers.com/showthread.php?t=980803
Still looking for the WiFi SBF
I used this yesterday after using the One click Unroot which broke my Xoom.

I try but pc will not recognize through adb or RSD 5.0

abuaban said:
I try but pc will not recognize through adb or RSD 5.0
Click to expand...
Click to collapse
Correct ADB would not work for me but RSD 4.9 did. I'm guessing you already have the drivers installed and set correctly in device manager.The link I posted is for the 3G version only a WiFi version is not available yet. Just making that clear.

i just went thru this last night! What worked for me was at start up hold power+volume down while plugged in to computer. Rerun the one click root. Then (my problem) flash back to stock kernal before trying to do whatever it is you are trying to do.

Motorola Razr

Hello,
I upgraded my Motorola Razr Model XT910 Android version 2.3.5 to 2.3.6.
Days later I was upgraded to version 4.0 was a mistake, because the system does not start anymore.
The following message appears on a black screen with white letters:
AP Fastboot Flash Mode (S) (Flash Failure)
0A.74
and MMC Info: Seize 16g
To return to normal mode, first press key to power dowsn
Device is LOCKED. Status Code: 0
Battery OK
OK to Program
Connect USB
Data Cable
Does anyone have any solutions to this problem?

spao123 said:
Hello,
I upgraded my Motorola Razr Model XT910 Android version 2.3.5 to 2.3.6.
Days later I was upgraded to version 4.0 was a mistake, because the system does not start anymore.
The following message appears on a black screen with white letters:
AP Fastboot Flash Mode (S) (Flash Failure)
0A.74
and MMC Info: Seize 16g
To return to normal mode, first press key to power dowsn
Device is LOCKED. Status Code: 0
Battery OK
OK to Program
Connect USB
Data Cable
Does anyone have any solutions to this problem?
Click to expand...
Click to collapse
Go to the Motorola razr part of the forums and go to Android development, and find the fastboot files for your region.
Sent from my Maxxed Out Razr!

Moto G Totally Unusable

Hey guys. Thank you for you time looking over this.
My brother has a Moto G (US GSM version)that he's asked me to repair for him for $50 (that I really need) and I've gone through everything my limited brain can think of.
So, here's the issue(s): When turned on, the phone immediately boots to fastboot and at the bottom has two lines saying "Invalid Boot Image" and
"Fastboot reason: Fall-through from normal boot mode"
I can get the phone into CWM recovery, and that's about it. When attached via USB, the phone doesn't show connected at all. A normal bootup just kicks me to fastboot immediately. Inside CWM, I've tried wiping and all that jazz, but it doesn't seem to do anything for me. I know there are guides and such for restoring the phone back to stock everything..but I can't get the PC to see the phone at all, so I'm not sure if I'm still able to do that or not. I've not been able to find a way.
Hopefully that's enough information. I'm not too sure what else is needed. But I could really use the help here if you guys have any ideas, because I'm totally stumped. Thanks again.

You can either use a USB OTG cable to connect it to a flash drive or micro SD card and flash a CM zip. I'm not sure if your boot loader is corrupted or not, so you might have to reflash that too.
Or you can manually reflash the stock firmware from the bootloader (again assuming your bootloader works. You might be able to sideload through CWM too), but if you're not familiar with adb it might be a pain in the ass.
If you don't have a USB otg cable and want the easiest way out, go to the original development section for the moto g and go to the "Moto tool" thread. Download the GPE firmware and use the tool to flash it (I believe this also flashes the gpe bootloader so if that's your issue that will fix it too), its very simple to use.
Sent from my XT1034 using Tapatalk

pisherthefisher said:
You can either use a USB OTG cable to connect it to a flash drive or micro SD card and flash a CM zip. I'm not sure if your boot loader is corrupted or not, so you might have to reflash that too.
Or you can manually reflash the stock firmware from the bootloader (again assuming your bootloader works. You might be able to sideload through CWM too), but if you're not familiar with adb it might be a pain in the ass.
If you don't have a USB otg cable and want the easiest way out, go to the original development section for the moto g and go to the "Moto tool" thread. Download the GPE firmware and use the tool to flash it (I believe this also flashes the gpe bootloader so if that's your issue that will fix it too), its very simple to use.
Sent from my XT1034 using Tapatalk
Click to expand...
Click to collapse
Thanks very much for your help. I'm just wondering if all the steps with the cables and all that will still work when the phone shows no connection at all? When it's hooked up to the PC, it doesn't show connected whatsoever.
Sorry, I'm not too familiar with this stuff.

BrinkBT said:
Thanks very much for your help. I'm just wondering if all the steps with the cables and all that will still work when the phone shows no connection at all? When it's hooked up to the PC, it doesn't show connected whatsoever.
Sorry, I'm not too familiar with this stuff.
Click to expand...
Click to collapse
What computer software are you using of its windows download Motorola drivers
Sent from my XT1032 using Tapatalk

Moto G boot up failed
I have a similar problem with my Moto G 2013 LTE international version. My phone boots into fastboot, but then I cannot boot into recovery. It just says boot up failed. My bootloader is unlocked and I am rooted. I have tried to install TWRP but no luck. I have tried it using TWRP manager automatically and by flashing a zip file. I have tried sideloading, but that didn't work either. Please forward any suggestions.

Help with bricked? XT1039...

HI,
First time posting, but read a lot of great info on here in the past. just made a bit of a stupid mistake tho... I'd rooted my XT1039, and then flashed the custom recovery back as well as the stock 4.4.4 eu retail gb. I was getting the 5.1 OTA update, but the install was failing. In my eagerness, I downloaded the GPe Lollipop 5.1 update from here - http://forum.xda-developers.com/moto-g/general/gpe-lollipop-5-1-1click-installer-t3075522 - and tried to flash that, missing that it is for a different phone. Now I'm stuck at the bootloader menu, with the error "fall-through from normal boot mode." Any attempt to select normal powerup, recovery, etc results in a black screen with "Google" written on it and an unlocked padlock symbol.
I was going to try and flash the stock 4.4.4 image I had, but when connecting the phone to the PC via USB, fastboot isn't recognising it as attached, even though the phone detects that USB is connected...
Any help would be seriously and massively appreciated!!
Thanks in advance!

Hey man, I have a similar problem as you. Maybe I can give you a little hand, but its better if somebody who understan everything well give you the hand, becouse I'm a "starter" with this of Moto G.
Your device is charged? With my XT1040, the bootloader didnt connect with the PC via USB if the batery was low. Other thing, which version of bootloader do you have?

Thanks! Yes, the phone is charged! Not sure what version of the bootloader it is...

Start fastboot mode with "Pwr" + "VolDwn" and in the top of the screen says:
Code:
AP Fastboot Flash Mode (S)
41.xx [COLOR="Red"]<--- version of bootloader[/COLOR]

It's 41.19...

Try flashing the CWM Recovery again ClockWorkMod Recovery by Somcom3X with fastboot.
Then mount USB storage and upload an Lollipop's backup/system for your XT1039.
Finally, try to install the Lollipop's zip. If the instalation finish succesfull, wipe data and cache. Then try to start your device normaly (first option of CWM (restart))
Anyway, yesterday I made a thread explaining what happened to me with my XT1040 and how I solve it. Read it if you have time, maybe helps with your problem XT1040 - Reviving bad Lollipop flash/downgrade/bootloader 41.18
Note: I think that XT1039 and XT1040, both can work with the same Lollipop but I'm not sure, ask arround before try with a XT1040 backup.

Hi,
Thanks for that info. Unfortunately I can't do any of that, because fastboot doesn't see the phone any more. When I plug the phone in by USB, windows recognises it, and the phone says that USB is connected, but "ADB devices" in fastboot doesn't see it... So I don't know if it is completely bricked! Selecting any option in the bootloader menu gives me a screen with "Google" on it and a padlock sign...

It has enough battery? If not, Moto G dont allow you to use ADB comands for safety. If not that, really I have no idea. Hopefully someone who knows more than me pass by your thread

Yes, the battery is fully charged... ok, thanks for your help anyway!

NOKIA 2, TA-1007 stuck on Nokia logo

Background: After a night of searching I was unable to find a solution for this. I'm a newbie in the phone tech, but I did root couple of them, back in the days, with stock recovery and with TWRP. The first owner of this phone said it was working well until this happened.
Problem: I got this phone in the state where it's stuck on Nokia logo. Developer mode is not enabled, therefore OEM is not unlocked as well, and I'm only left with a stock recovery with an option to sideload update from ADB, and a Fastboot (Download) mode. I haven't been able to find a trusted firmware and even if I did I don't think it would work without OEM unlock...
Any ideas?
And, oh, I'm using Linux.
Thanks