Hi, i wrong to change code at 210 offset.
now my phone doesn't boot, but pc see QHSUSB_DLOAD ....
How i can repair my One S ??
Please help me !!
_Freezer_ said:
Hi, i wrong to change code at 210 offset.
now my phone doesn't boot, but pc see QHSUSB_DLOAD ....
How i can repair my One S ??
Please help me !!
Click to expand...
Click to collapse
Please help meeeee
Can you explain further?
what did you change, and what did you input?
_Freezer_ said:
Hi, i wrong to change code at 210 offset.
now my phone doesn't boot, but pc see QHSUSB_DLOAD ....
How i can repair my One S ??
Please help me !!
Click to expand...
Click to collapse
You have an unrecoverable brick. Nothing you can do now but call your carrier or htc and try to a warranty repair. Qhsusd_dload means Qualcomm high speed usb download mode and is used by oem to flash software, you would need tools from them or a hack/workaround (which doesn't exist for this phone) to flash while suck in this download mode
Related
hi guy
i have one magic 32a and i dont know what happend go to this problem
when i turn on this screen is like attachment
and i cant go to hboot & recovery mod
what can i do?! any one help me?
reza_majd said:
hi guy
i have one magic 32a and i dont know what happend go to this problem
when i turn on this screen is like attachment
and i cant go to hboot & recovery mod
what can i do?! any one help me?
Click to expand...
Click to collapse
any one help me?!! plz
had the same error !
I send it to repair service. ! they changed the mainboard of the phone.
So ! There is no other chance !
It was a warranty.
Can you run into fastboot (back+power)?
cnossa said:
Can you run into fastboot (back+power)?
Click to expand...
Click to collapse
no i cant run any thing
fast boot,recovery,and... every u think
did u use ruu before this problem came?
Same to me...
have the same problem in my phone. I could not find the solution. I'm waiting for your help
adb
Can you access your phone through adb?
Can you access your phone through adb?
darsic said:
Can you access your phone through adb?
Click to expand...
Click to collapse
no cant access with anything
I got the same problem. It happened when I flashed corrupted radio image. Now when I turn it on the package and arrow picture appears and after few second lots of different colors appear. Can't access it in any way. I understand there is radio boot mode when you press trackball and power at the same time. The blue LED shines. I can't do anything in that mod too. Is there anyone who could help us? If not, does anyone know how much is the motherboard replacement? I don't have any type of warranty.
I have same problem with my phone, after radio update
...
Look at these two forums .. try EVERYTHING!!
http://forum.xda-developers.com/showthread.php?t=571457
&&&&
http://forum.xda-developers.com/showthread.php?t=647213
GOOD LUCK!
same pictrue on my magic
after update radio...it's not boot and not do it everything
hi man
i have one jasjar and my device dont turn on,only red light work in charging
and when i go to in bootloader i see this message "DOC version is error"
any body can help me?! how can i fix my device
majdifar said:
hi man
i have one jasjar and my device dont turn on,only red light work in charging
and when i go to in bootloader i see this message "DOC version is error"
any body can help me?! how can i fix my device
Click to expand...
Click to collapse
Have you tryied to hard rest, or look for HTC Universal in the XDA Wiki there is all information you may need. Good Luck
i do this too man but dont work
Reza WM said:
i do this too man but dont work
Click to expand...
Click to collapse
Try use MTTY tool if you stuck in the bootloader. Remove the sim card, The SD Card and have your battery fully charged. When u use mtty you must disable active sync's usb connectoin on ur pc so the mtty can connect through this port. What is the status of your device at the moment? what happens when u connect it to your pc?
here is my problem with mtty
majdifar said:
hi man
i have one jasjar and my device dont turn on,only red light work in charging
and when i go to in bootloader i see this message "DOC version is error"
any body can help me?! how can i fix my device
Click to expand...
Click to collapse
Hi, Your Battery Is Dead, U Need To Change One. It Does Not Link To DOC Format. I Have This Problem Before.
Hope It Helps
Hi there , I was trying to use JuonuputBear to S-OFF my phone through the wire trick , so I was doing the wire trick (after several failing tries) , and somehow the phone was a total brick , doesn't take usb or charge led ... So I looked into this and I found a QHSUSB_DLOAD fix for that , however my phone doesn't even enter or appear as it is in that mode , I tried doing the wire trick while the phone is dead it didn't work , I tried my linux machine the QHSUSB_DLOAD the phone wasn't found ! I guess the bootloader was wiped when Jounuput bear was doing its stuff , plz help me guys !
EDIT : I don't think anymore the bootloader is wiped since I didn't reach the part where it installs JuonuptBear's bootloader ! PLease any ideas !
you should have posted this in the Q&A section. You arent going to get much help here, just people ranting on the fact that you posted a question in the development issue. Mods should probably move this to that section. As for your problem, i can't really help. sorry
thx , I will tell a mod to move my thread :'(
Have you tried using the Sensation unbrick thread?
try unbricking project or ask in juopunutbear's thread
It tells me to use QHSUSB , which isn't working for me , may you plz link me to it so I could ensure ?
seaskyways said:
It tells me to use QHSUSB , which isn't working for me , may you plz link me to it so I could ensure ?
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=1522351
rzr86 said:
http://forum.xda-developers.com/showthread.php?t=1522351
Click to expand...
Click to collapse
My phone is not being detected , I removed everything , I try to detect , nop ...
seaskyways said:
My phone is not being detected , I removed everything , I try to detect , nop ...
Click to expand...
Click to collapse
while doing the juopunutbear method did you have enough battery?
if not remove battery,sdcard and sim and charge it as it is for 5-6 hours
then put them back and switch on the device normally
I had 99% charge !
seaskyways said:
I had 99% charge !
Click to expand...
Click to collapse
did you check the troubleshoot from the guide you used?
edit:it is better to post your issue also in the thread you used
Troubleshooting in the jounuputbear thread is for live phones , not for dead phones ...
Any help guys ?!?!
seaskyways said:
Any help guys ?!?!
Click to expand...
Click to collapse
the only thing i can tell you is use jtag.
i am out of ideas
Thats what I finally thought about , but I know nothing at all about JTAG , I need professionel help
EDIT : Maybe AdamOutler :?
seaskyways said:
Thats what I finally thought about , but I know nothing at all about JTAG , I need professionel help
EDIT : Maybe AdamOutler :?
Click to expand...
Click to collapse
i never used jtag.i have no experience on it
you can go in a local repair shop.probably they can fix it
I got it to boot !!! I re-ran the joupunut thing , and tried doing the wire-trick before the phone even shows any sign , instantly the PC showed that qhsusb mode , and everything went alrighty !! Maybe this can be an answer for others !
seaskyways said:
I got it to boot !!! I re-ran the joupunut thing , and tried doing the wire-trick before the phone even shows any sign , instantly the PC showed that qhsusb mode , and everything went alrighty !! Maybe this can be an answer for others !
Click to expand...
Click to collapse
troubleshoot
glad for you man
seaskyways said:
I got it to boot !!! I re-ran the joupunut thing , and tried doing the wire-trick before the phone even shows any sign , instantly the PC showed that qhsusb mode , and everything went alrighty !! Maybe this can be an answer for others !
Click to expand...
Click to collapse
Hello, I am having a simliar issue with the Windows driver error coming up when trying to get S-Off after the wire trick. I was able to restore fine, but everytime I am about to get a successful wire trick it gives me the driver error.
Can you tell me what you did? Thank you!
whohitme said:
Hello, I am having a simliar issue with the Windows driver error coming up when trying to get S-Off after the wire trick. I was able to restore fine, but everytime I am about to get a successful wire trick it gives me the driver error.
Can you tell me what you did? Thank you!
Click to expand...
Click to collapse
Please try and use my Guide here http://forum.xda-developers.com/showthread.php?t=2247319 i am very confident if used it will be fine and should let you proceed without any errors
Hello all
This is Dr.Mohammad from Jordan
Please i have asked all Arabian forums about unbriking my galaxy s3 mini G730V Verizon
And i haven't found any solution to unbrick it
It had bricked due to ez-unlock fail and when reboot nothing on screen and haven't enter to download mode or recovery mood
And when i connect it to my laptop it shows DLOAD_QHUSB
And nothing shows in odin or on phone screen and no JTAG found on Riff box
Can anybody tell me how to unbrick it
Regards
qjor00 said:
Hello all
This is Dr.Mohammad from Jordan
Please i have asked all Arabian forums about unbriking my galaxy s3 mini G730V Verizon
And i haven't found any solution to unbrick it
It had bricked due to ez-unlock fail and when reboot nothing on screen and haven't enter to download mode or recovery mood
And when i connect it to my laptop it shows DLOAD_QHUSB
And nothing shows in odin or on phone screen and no JTAG found on Riff box
Can anybody tell me how to unbrick it
Regards
Click to expand...
Click to collapse
its a even deader paperweight if you cant recover it would Jtag, Sorry Mate,
Trozzul said:
its a even deader paperweight if you cant recover it would Jtag, Sorry Mate,
Click to expand...
Click to collapse
so there is no way to unbrick the device ??
qjor00 said:
so there is no way to unbrick the device ??
Click to expand...
Click to collapse
yes if your at "DLOAD_QHUSB " thats a hard brick, only way to recover it would be a Jtag fix and since it does not show up on your riff there is no way to fix it.
qjor00 said:
so there is no way to unbrick the device ??
Click to expand...
Click to collapse
Well I thought up of something If you want to do it, buy a new motherboard for it, should be relatively easy if you know how to talpke it apart. As of getting the motherboard, I'm not sure. Its risky buying them off ebay because they can't prove if its working or not, or if the GPS, WiFi or antenna is broken, probably best bet would be to scrap one off a cracked glass or broken display.
I flashed CM13 by Olivier. My phone booted and it was working fine. When i tried to reboot my device it just shut off and DIDN'T BOOT UP AGAIN
When ii connect my phone to my laptop it just recognises it as a USB Input Device.
And when connected a greenish yellow light comes up and goes off.
PLZ Help...............
http://forum.xda-developers.com/xperia-l/help/rom-cyanogenmod-13-0-t3258904
Here, click the link.. It may work..
But it has LOW chances of working..
Help me plzz....
priyank.g said:
http://forum.xda-developers.com/xperia-l/help/rom-cyanogenmod-13-0-t3258904
Here, click the link.. It may work..
But it has LOW chances of working..
Click to expand...
Click to collapse
Sir it didnt work for me plz help. I want to recover my phone i am in middle of nothing. i am just stuck.
udaykapoor97 said:
Sir it didnt work for me plz help. I want to recover my phone i am in middle of nothing. i am just stuck.
Click to expand...
Click to collapse
If its hardbricked, you might want to take it to the service center :crying: