[help] brick htc magic 32a, and not boot - myTouch 3G, Magic Android Development

hi guy
i have one magic 32a and i dont know what happend go to this problem
when i turn on this screen is like attachment
and i cant go to hboot & recovery mod
what can i do?! any one help me?

reza_majd said:
hi guy
i have one magic 32a and i dont know what happend go to this problem
when i turn on this screen is like attachment
and i cant go to hboot & recovery mod
what can i do?! any one help me?
Click to expand...
Click to collapse
any one help me?!! plz

had the same error !
I send it to repair service. ! they changed the mainboard of the phone.
So ! There is no other chance !
It was a warranty.

Can you run into fastboot (back+power)?

cnossa said:
Can you run into fastboot (back+power)?
Click to expand...
Click to collapse
no i cant run any thing
fast boot,recovery,and... every u think

did u use ruu before this problem came?

Same to me...

have the same problem in my phone. I could not find the solution. I'm waiting for your help

adb
Can you access your phone through adb?

Can you access your phone through adb?

darsic said:
Can you access your phone through adb?
Click to expand...
Click to collapse
no cant access with anything

I got the same problem. It happened when I flashed corrupted radio image. Now when I turn it on the package and arrow picture appears and after few second lots of different colors appear. Can't access it in any way. I understand there is radio boot mode when you press trackball and power at the same time. The blue LED shines. I can't do anything in that mod too. Is there anyone who could help us? If not, does anyone know how much is the motherboard replacement? I don't have any type of warranty.

I have same problem with my phone, after radio update

...
Look at these two forums .. try EVERYTHING!!
http://forum.xda-developers.com/showthread.php?t=571457
&&&&
http://forum.xda-developers.com/showthread.php?t=647213
GOOD LUCK!

same pictrue on my magic
after update radio...it's not boot and not do it everything

Related

[Q] jasjar problem in bootloader "DOC version is error!"

hi man
i have one jasjar and my device dont turn on,only red light work in charging
and when i go to in bootloader i see this message "DOC version is error"
any body can help me?! how can i fix my device
majdifar said:
hi man
i have one jasjar and my device dont turn on,only red light work in charging
and when i go to in bootloader i see this message "DOC version is error"
any body can help me?! how can i fix my device
Click to expand...
Click to collapse
Have you tryied to hard rest, or look for HTC Universal in the XDA Wiki there is all information you may need. Good Luck
i do this too man but dont work
Reza WM said:
i do this too man but dont work
Click to expand...
Click to collapse
Try use MTTY tool if you stuck in the bootloader. Remove the sim card, The SD Card and have your battery fully charged. When u use mtty you must disable active sync's usb connectoin on ur pc so the mtty can connect through this port. What is the status of your device at the moment? what happens when u connect it to your pc?
here is my problem with mtty
majdifar said:
hi man
i have one jasjar and my device dont turn on,only red light work in charging
and when i go to in bootloader i see this message "DOC version is error"
any body can help me?! how can i fix my device
Click to expand...
Click to collapse
Hi, Your Battery Is Dead, U Need To Change One. It Does Not Link To DOC Format. I Have This Problem Before.
Hope It Helps

[Q] Huawei U8860 Honor after new recovery.img: Image Signature Verify Fail

I'm afraid I might have bricked my phone.
After trying to install CWM on my Huawei Honor and rebooting, a yellow warning sign appears with the following text:
"Image signature verify fail
Your boot/recovery image may have an incorrect signature.
Please update your image to a signature official one.
You can remove battery for power down."
I've read a LOT of posts regarding rooting of this device on here, as well as numerous of other sites, but half of them are outdated and the other half are uninformative or poor in quality. Nobody can seem to get this to work, but I'm still willing to try my luck on here before turning the phone in for a new one, claiming it was an OTA update that did it.
I tried rebooting into Pink/Purple screen and connecting to my computer, but it doesn't show up.. All I hear is a "connected USB" sound and no drives. I tried installing Knives & Forks, but it requires my phone to have USB Debugging enabled, which, to my LACK of luck, wasn't enabled when this error happened. I'm really freaking out, as I just got this phone.
Please, any help would be greatly appreciated!
bump..
same problem
CheckeredDots said:
bump..
Click to expand...
Click to collapse
I have same problem , It's terrible that can't find a solution about this problem.
Please help us...
some one please help. here is the same problem with me aswell
gultekinyadigar said:
I have same problem , It's terrible that can't find a solution about this problem.
Please help us...
Click to expand...
Click to collapse
I have the same problem please help.
krishnaneupanes said:
I have the same problem please help.
Click to expand...
Click to collapse
I'm having this same problem with my girlfriend device....I saw a gui that have this problem solved but i wasmn't hable to make the same and solve :S
any one can help please ??
I dont know if it will work for you guys but i managed to fix mine. I placed dload folder with desired update either GB or ICS into micro sd card. Place it in the phone, and hold Volume Up + Volume Down + Power (refering to pink screen) and mine started to flash the stock rom.
check this thread http://forum.xda-developers.com/showthread.php?t=2198184&highlight=u8860
thanks it workerd. had the same problem and solved
thanks it workerd. had the same problem and solved

[Q] Sensation XE Fully hard bricked , PLZ HELP !

Hi there , I was trying to use JuonuputBear to S-OFF my phone through the wire trick , so I was doing the wire trick (after several failing tries) , and somehow the phone was a total brick , doesn't take usb or charge led ... So I looked into this and I found a QHSUSB_DLOAD fix for that , however my phone doesn't even enter or appear as it is in that mode , I tried doing the wire trick while the phone is dead it didn't work , I tried my linux machine the QHSUSB_DLOAD the phone wasn't found ! I guess the bootloader was wiped when Jounuput bear was doing its stuff , plz help me guys !
EDIT : I don't think anymore the bootloader is wiped since I didn't reach the part where it installs JuonuptBear's bootloader ! PLease any ideas !
you should have posted this in the Q&A section. You arent going to get much help here, just people ranting on the fact that you posted a question in the development issue. Mods should probably move this to that section. As for your problem, i can't really help. sorry
thx , I will tell a mod to move my thread :'(
Have you tried using the Sensation unbrick thread?
try unbricking project or ask in juopunutbear's thread
It tells me to use QHSUSB , which isn't working for me , may you plz link me to it so I could ensure ?
seaskyways said:
It tells me to use QHSUSB , which isn't working for me , may you plz link me to it so I could ensure ?
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=1522351
rzr86 said:
http://forum.xda-developers.com/showthread.php?t=1522351
Click to expand...
Click to collapse
My phone is not being detected , I removed everything , I try to detect , nop ...
seaskyways said:
My phone is not being detected , I removed everything , I try to detect , nop ...
Click to expand...
Click to collapse
while doing the juopunutbear method did you have enough battery?
if not remove battery,sdcard and sim and charge it as it is for 5-6 hours
then put them back and switch on the device normally
I had 99% charge !
seaskyways said:
I had 99% charge !
Click to expand...
Click to collapse
did you check the troubleshoot from the guide you used?
edit:it is better to post your issue also in the thread you used
Troubleshooting in the jounuputbear thread is for live phones , not for dead phones ...
Any help guys ?!?!
seaskyways said:
Any help guys ?!?!
Click to expand...
Click to collapse
the only thing i can tell you is use jtag.
i am out of ideas
Thats what I finally thought about , but I know nothing at all about JTAG , I need professionel help
EDIT : Maybe AdamOutler :?
seaskyways said:
Thats what I finally thought about , but I know nothing at all about JTAG , I need professionel help
EDIT : Maybe AdamOutler :?
Click to expand...
Click to collapse
i never used jtag.i have no experience on it
you can go in a local repair shop.probably they can fix it
I got it to boot !!! I re-ran the joupunut thing , and tried doing the wire-trick before the phone even shows any sign , instantly the PC showed that qhsusb mode , and everything went alrighty !! Maybe this can be an answer for others !
seaskyways said:
I got it to boot !!! I re-ran the joupunut thing , and tried doing the wire-trick before the phone even shows any sign , instantly the PC showed that qhsusb mode , and everything went alrighty !! Maybe this can be an answer for others !
Click to expand...
Click to collapse
troubleshoot
glad for you man
seaskyways said:
I got it to boot !!! I re-ran the joupunut thing , and tried doing the wire-trick before the phone even shows any sign , instantly the PC showed that qhsusb mode , and everything went alrighty !! Maybe this can be an answer for others !
Click to expand...
Click to collapse
Hello, I am having a simliar issue with the Windows driver error coming up when trying to get S-Off after the wire trick. I was able to restore fine, but everytime I am about to get a successful wire trick it gives me the driver error.
Can you tell me what you did? Thank you!
whohitme said:
Hello, I am having a simliar issue with the Windows driver error coming up when trying to get S-Off after the wire trick. I was able to restore fine, but everytime I am about to get a successful wire trick it gives me the driver error.
Can you tell me what you did? Thank you!
Click to expand...
Click to collapse
Please try and use my Guide here http://forum.xda-developers.com/showthread.php?t=2247319 i am very confident if used it will be fine and should let you proceed without any errors

htc screen with four triangles

Hi there.
I'm new here and in big trouble. Can you please help me with my HTC Desire.
I was trying to load custom ROm and something went wrong, now I'm stuck with HTC screen with four triangels, and no idea on how to fix it.
Can you please help me. Allready looked at this forum but nothing works for me.
can you please give me step by step guide? here are two pictures of what is going on.
PLEASE HELP me, it's very important to me.
tonicro said:
Hi there.
I'm new here and in big trouble. Can you please help me with my HTC Desire.
I was trying to load custom ROm and something went wrong, now I'm stuck with HTC screen with four triangels, and no idea on how to fix it.
Can you please help me. Allready looked at this forum but nothing works for me.
can you please give me step by step guide? here are two pictures of what is going on.
PLEASE HELP me, it's very important to me.
Click to expand...
Click to collapse
This is RUU mode. If you plug into your PC
Code:
fastboot reboot
will reboot your phone. However you will then need to go to recovery and flash a rom probably. If the above command doesn't work, you need to find a stock RUU for your device and flash it.
MacHackz said:
This is RUU mode. If you plug into your PC
Code:
fastboot reboot
will reboot your phone. However you will then need to go to recovery and flash a rom probably. If the above command doesn't work, you need to find a stock RUU for your device and flash it.
Click to expand...
Click to collapse
thank you for your reply. Tried Bortak's guide and flashed an RUU, and it worked .
thank you guys for all the help

One mini stuck in bootloader mode

Hi everyone
My friend's phone just became stuck in this mode one day. He did nothing to the phone. He didn't even unlock the bootloader.
Now I am trying to unlock it, but when I flash the unlock file nothing happens. Sometimes the output says that it failed to create a splash screen.
Please help me. He is not someone who messes with their so it would be a shame if I can't get it working again.
Thanks for any help.
i have the same problém if u find the solution plz help
adamguitar said:
i have the same problém if u find the solution plz help
Click to expand...
Click to collapse
I wonder if it's a hardware problem.
Sent from my A0001 using Tapatalk
I am having the same problem, only mine is out of warranty.
i have a video of what it does, i can't run any ruu
since i can't post any vids search youtube " HTC ONE MINI NO BOOT
Part one
Part Two
any help would be great, Thanks

Categories

Resources