Database Info

[Q] Huawei Honor U8860 Blue Screen CWM?

Hello XDA, I have a problem with my newly acquired phone that I'd like to ask you guys about.
I'm not exactly a noob when it comes to rooting and flashing android devices, but I've researched and scoured the internet about this problem!
It seems that whenever I try to boot my phone into recovery (CWM), it just flashes the Huawei logo and shows a bright blue screen for an eternity. What's the problem here? I've tried several recovery.img files, but they all seem to do the same thing... I'm on B919 so everything should be all set. Do I have to go through all the steps again and hope for another result, or am I doing something wrong?
Please help! It'd be appreciated a lot!
-CheckeredDots

CheckeredDots said:
Hello XDA, I have a problem with my newly acquired phone that I'd like to ask you guys about.
I'm not exactly a noob when it comes to rooting and flashing android devices, but I've researched and scoured the internet about this problem!
It seems that whenever I try to boot my phone into recovery (CWM), it just flashes the Huawei logo and shows a bright blue screen for an eternity. What's the problem here? I've tried several recovery.img files, but they all seem to do the same thing... I'm on B919 so everything should be all set. Do I have to go through all the steps again and hope for another result, or am I doing something wrong?
Please help! It'd be appreciated a lot!
-CheckeredDots
Click to expand...
Click to collapse
Try the attached recovery.img.

R7 PlusM doesn't boot properly anymore

Hi there, I have tried to find a solution today for this issue but I can't find anything useful anywhere .
Last night I received another update via OTA 151115 and proceed to install it as the earlier ones didn't work. Surprisingly this one worked and after restart my phone didn't had any trace of google apps on it, try to install google play, framework and so but the phone says it's not compatible with google (Big time). Then I went to the bootloader to perform a wipe/erase everything and here's when the problem began, it was stuck in the screen that says optimising applications (the one before starting the setup) and after half an hour unattended the phone restart itself one after another, like in a loop.... From this point on, I haven't been able to power on the device anymore.
It was bought through a third party seller from China, already contacted them and waiting for an answer...
Any clue about what can I do to use my phone again?
Update: I can see the oppo logo after pressing volume up plus power buttons for around 15 seconds but it shows for less than a second the screen it appears when it's updating the software and then it switches itself off... Is this a sign of possible recovery in some way?
just downloaded the last 151115 official update from the oppo community forum but I've got a problem. I can not enter the fasboot or recovery mode because the phone is like trying to install something and it constantly switches itself off... The day this happened, I had two files in my root directory, one was the few update and the other was a full Google thing in the same format than the fw file, I'm afraid I selected the wrong one and that's why the phone went crazy. I guess if there's some way to cancel that attempt to update the wrong file or reset that thing in some way, I'd be able to start over but I can't find anything grgrgr
By the way, the last ota update allowed google maps to work flawlessly and also Instagram, two of my biggest concerns with the phone
I'm even trying to contact oppo service to send the thing and sort it out that way xx
Cheers
Pedro

I've just contacted Oppo Customer Service in Europe to see if they have any solution for my problem as I can't make this thing to start and the battery also doesn't seems to be charging though... No response for the moment, just an automated one confirming the reception of my enquiry
Should I start thinking about my lovely new phone as my new paper weight?

peterpanda1970 said:
I've just contacted Oppo Customer Service in Europe to see if they have any solution for my problem as I can't make this thing to start and the battery also doesn't seems to be charging though... No response for the moment, just an automated one confirming the reception of my enquiry
Should I start thinking about my lovely new phone as my new paper weight?
Click to expand...
Click to collapse
No, no you have a chance to save your phone. If you have to R7 plus M Oppo Chinese version, I can help you. I also had this problem, but he was able to solve it. My Skype: ed_mobstyle.

Hi mate, thanks for the answers. Yes it is the China mobile version "M" I don't have Skype I'm afraid grgrgr
Cheers
Pedro

I was able to fix this problem fairly easily.
First I entered recovery (press Power + Volume Down when the phone is booting up)
Then from the device menu I installed a ROM, you want to download the version you last used. (MAKE SURE IT IS FOR THE OPPO R7 PLUS M)
After installing the stock rom, it will go into installation and have you set up your phone.
After you installed the ROM, download OPPO tools v 1.6.5
Open Oppo Tools and root your phone this will take a few minutes.
After you have rooted your device open Oppo Tools again and select Unlock Google Mobile Services (this too me two weeks to figure out).
Let the phone restart, after it is finished, you should have basic google functionalities (Playstore and Frameworks).
Now since you are rooted, it means that your phone will not download any further OTAs and you will have to install them as ROMs, you can do so by repeating the above process, but I'm not sure of the functionality of Oppo Tools past the most current version.
I cant post links to provide you to where the ROM files and Oppo Tools are at this moment
The roms will be located on the "[ROM][STOCK] Official R7 Plus Roms | R7Plus, R7PlusF, R7PlusM [15 Sep 2015]" of Oppo Fourms
The Oppo Tools will be located when you google "OPPO Tools apk" on your computer and it will take you to the thai version of Oppo Fourms follow the link there to download the apk

Hi mate, thanks for your answer but my problems is that I can't enter the recovery mode cause the phone try to install something and then it switches itself off
I've tried to connect the phone to my laptops and sometimes they recognised it as Qhsub something and I can't find anywhere this driver. Then all the softwares I've got ask me for a scatter file which I don't have....
Also trying to contact support from the brand. For now just send them my data and the phone's imei and now waiting for the magic response... They are excessively slow in their answers!
Thanks so much anyway
Cheers
Pedro

hi mate I guess un the malysia oppo community you can fin the drivers and every things about oppo r7pkusM

sollitair said:
hi mate I guess un the malysia oppo community you can fin the drivers and every things about oppo r7pkusM
Click to expand...
Click to collapse
Just checked in and didn't find anything but the bloody oppotools lol.
Cheers mate!

so please if you still with the same problem let me know I'll try to write an email directly to you with all
links you need for it.
[email protected]
best of luck

Still at the same point mate! The thing keeps on trying to install something and switches itself off. My windows laptop runs on win10, the other is a Mac so I guess useless for this matters... The battery runs out faster than ever even being off. Disaster! Lol
I would really appreciate your help
Cheers
Pedro

This is a video I made to explain how this thing try to boot and it never makes it further...
https://www.youtube.com/watch?v=2LNiWODlUd0

Hi matr
believe me I have just coming back from oppo office and I show them your video and what they said '' you have to change it with the guarantee you have''.
it clear now for me and I state that I had the same problem all what I did is installing the oppo drivers on my PC boot on fastboot mode give some commands to unlock it and tjen I flash the original recovery from oppo then tje coloros was installed and updated as well before flashi'g again TRWP recovery and right now I''m writing to you from my r7plusm it's work smothly rooted with the same original oppo rom coloros.
I hope that your just missing something and let me know to to follow you step by step on this.
cheers P

sollitair said:
Hi matr
believe me I have just coming back from oppo office and I show them your video and what they said '' you have to change it with the guarantee you have''.
it clear now for me and I state that I had the same problem all what I did is installing the oppo drivers on my PC boot on fastboot mode give some commands to unlock it and tjen I flash the original recovery from oppo then tje coloros was installed and updated as well before flashi'g again TRWP recovery and right now I''m writing to you from my r7plusm it's work smothly rooted with the same original oppo rom coloros.
I hope that your just missing something and let me know to to follow you step by step on this.
cheers P
Click to expand...
Click to collapse
Hi mate, my problem is that my computer detects the phone as qhsusb_bulk and I've tried every single file I found with that name and nothing changes, well, the device name from unknown to com1, com2... up to com13 I have seen.... Other thing is that I can't enter the fastboot mode or recovery mode neither. I wish I had an oppo service near home but I live in Uk, now I'm trying to get service from oppostyle and waiting for an answer. To be honest with you, I'm really annoyed with all this, never had a problem with bricked androids or iphones until I met this "guy" lol
Cheers
Pedro

I'm really sorry dude I hope I can help you as I did for mine it was quit simple with the same driver problems,so try to uninstall all drivers you have for oppo and install the one I shared with you taken from my ohone directly that the only way you can give any commands to your phone to switch to fastboot mode even if the problem still present

when I try to install the driver on my win10 laptop it says this...

Using an old win7 laptop I managed to install the bloody Qhsub driver and now the phone appears in the com ports under the name Qualcomm HS-USB QDLoader 9008 (COM4) does this means the phone really doesn't exist?

Update to this thread, I can't do anything until I find a proper driver for the phone which actually is recognised by my laptop as Qhsub_bulk and I can't bloody find this anywhere at least for making 6795 processors or specifically for this model...
Any clue?

peterpanda1970 said:
Update to this thread, I can't do anything until I find a proper driver for the phone which actually is recognised by my laptop as Qhsub_bulk and I can't bloody find this anywhere at least for making 6795 processors or specifically for this model...
Any clue?
Click to expand...
Click to collapse
No need panic ))) I've sent you a set for recovery your device )))) Good luck

ed_mobstyle said:
No need panic ))) I've sent you a set for recovery your device )))) Good luck
Click to expand...
Click to collapse
Hi mate, thanks for your help. Tried to open the link you sent me but it says it's not available anymore grgrgr
Cheers
Pedro

peterpanda1970 said:
Hi mate, thanks for your help. Tried to open the link you sent me but it says it's not available anymore grgrgr
Cheers
Pedro
Click to expand...
Click to collapse
Hi, please check now

[ROM][6.0] CyanogenMod 13.0 [ALPHA] [HARD BRICK FIX]

[ROM][6.0] CyanogenMod 13.0 [ALPHA] have bricked some XPERIA L devices. So this thread is to help those people who are facing the problem. I came across some methods to recover their Xperia L. Although, I am not sure it will work because I haven't tried it myself (Can't risk bricking my phone on purpose just to check this method which may or may not fix it ). But please go ahead and try it.
It's better to try than to cry!
Click to expand...
Click to collapse
METHOD 1
Remove Battery, press power button for around 10-12 seconds..then press and hold volume up, a Insert the battery , fash tft file using flastool
Source: https://www.youtube.com/watch?v=lycyxdkNlz8 (Comment by KãyRá S.s)
METHOD 2
Disconnect the phone from PC if connected Remove the battery Press and hold the power button for 15-20 seconds Re-insert battery Flash latest FW using flashtool..
Source: https://www.youtube.com/watch?v=lycyxdkNlz8 (Comment by BEST FULLAPPS)
If anyone know a better method or a suggestion please post it...

you can't fix in any way broken partition table, only with jtag and similiar, this all should work for semibricked devices...

Hard Brick......
Flashing_Expert said:
you can't fix in any way broken partition table, only with jtag and similiar, this all should work for semibricked devices...
Click to expand...
Click to collapse
Sir plz help me out i have bricked my device. When i connect it to a charger it shows a greenish light for a second and the it fades out. No detection my pc. It says that it is an unidentified device. actually it happened after i flashed cm13 by olivier. It booted up fine. I then just shut it down to install gapps. But it didnt respond any more.

udaykapoor97 said:
Sir plz help me out i have bricked my device. When i connect it to a charger it shows a greenish light for a second and the it fades out. No detection my pc. It says that it is an unidentified device. actually it happened after i flashed cm13 by olivier. It booted up fine. I then just shut it down to install gapps. But it didnt respond any more.
Click to expand...
Click to collapse
You had to install the latest package.. if u didn't only then u would've got hard bricked... cm13 is now tested by too many people and it runs without bugs.. so it may be the fault with the version of cm13 you used..

udaykapoor97 said:
Sir plz help me out i have bricked my device. When i connect it to a charger it shows a greenish light for a second and the it fades out. No detection my pc. It says that it is an unidentified device. actually it happened after i flashed cm13 by olivier. It booted up fine. I then just shut it down to install gapps. But it didnt respond any more.
Click to expand...
Click to collapse
oh damn another one guy same happened to me with same rom ...
sorry but this means your phone is dead like mine, your bootloader is corrupted so device is unable to boot to kernel nor to system
no flashmode or fastboot mode, you can see it only in device manager (with proper drivers) as qhusb dload 9008
sadly we don't have proper files for QPST software so nobody unbricked his XL to this date
only chance is motherboard replacement

udaykapoor97 said:
Sir plz help me out i have bricked my device. When i connect it to a charger it shows a greenish light for a second and the it fades out. No detection my pc. It says that it is an unidentified device. actually it happened after i flashed cm13 by olivier. It booted up fine. I then just shut it down to install gapps. But it didnt respond any more.
Click to expand...
Click to collapse
btw you had 2 partitions on your microsd? I need to know...

Hi, is it possible to have some more information on the situations with cm13 that have caused a hard-brick? I understood that that the features such as link2sd and app2sd are potentially dangerous? Is this understanding correct? If yes, could you please explain why and under which circumstances this could create troubles?
Do you have any further suggestions on what to avoid?
Many thanks in advance for your expert advice.
I wanted to try cm13 on my spare xperia l, but would like to avoid a hard brick...
Cheers,
Hennng

xleng said:
Hi, is it possible to have some more information on the situations with cm13 that have caused a hard-brick? I understood that that the features such as link2sd and app2sd are potentially dangerous? Is this understanding correct? If yes, could you please explain why and under which circumstances this could create troubles?
Do you have any further suggestions on what to avoid?
Many thanks in advance for your expert advice.
I wanted to try cm13 on my spare xperia l, but would like to avoid a hard brick...
Cheers,
Hennng
Click to expand...
Click to collapse
Its already been fixed in newer builds, also, the developer has stopped the development. But you can surely use CM13 Based ROMs since they also have better editing options.

I really cant wait for cm13. It really pleases me If rom get fixes

Lenovo S856 China Unbricking tutorial

Problem: You have purchased a China Lenovo S856 smartphone and tried to flash ROW ('Rest of World') firmware to it for whatever reason. You now have a softbricked phone that won't boot past the Lenovo screen.
Solution: Download the following files, which are a little tutorial with pictures, as well as the correct China firmware for your s856 and the Flashing tool to use....https://drive.google.com/open?id=0B6knvSQRiKPzQTMtaXFXZEFNbHc https://drive.google.com/open?id=0B6knvSQRiKPzRTk4ZTB3c1VDdzA https://drive.google.com/open?id=0B6knvSQRiKPzWVA2UENuY1NYTkk
All the solutions I have seen so far were sketchy at best and very difficult to comprehend, let alone use to unbrick your phone. This is what worked for me, and my attempt to help anyone else with the above problem.
That is all, and good day to you.

Thanks for your help, but my problem looks very difficult now, because the system cannot recognize the phone and the phone refuse to boot on. What do you advice?
way2aware said:
Problem: You have purchased a China Lenovo S856 smartphone and tried to flash ROW ('Rest of World') firmware to it for whatever reason. You now have a softbricked phone that won't boot past the Lenovo screen.
Solution: Download the following files, which are a little tutorial with pictures, as well as the correct China firmware for your s856 and the Flashing tool to use....https://drive.google.com/open?id=0B6knvSQRiKPzQTMtaXFXZEFNbHc https://drive.google.com/open?id=0B6knvSQRiKPzRTk4ZTB3c1VDdzA https://drive.google.com/open?id=0B6knvSQRiKPzWVA2UENuY1NYTkk
All the solutions I have seen so far were sketchy at best and very difficult to comprehend, let alone use to unbrick your phone. This is what worked for me, and my attempt to help anyone else with the above problem.
That is all, and good day to you.
Click to expand...
Click to collapse

Prajiro said:
Thanks for your help, but my problem looks very difficult now, because the system cannot recognize the phone and the phone refuse to boot on. What do you advice?
Click to expand...
Click to collapse
Hello...
My system did not recognize my phone, either. Nor would it boot up... it was bricked. This tutorial is for people who are exactly in your situation. I would suggest downloading the files I have uploaded, and reading the tutorial.

way2aware said:
Hello...
My system did not recognize my phone, either. Nor would it boot up... it was bricked. This tutorial is for people who are exactly in your situation. I would suggest downloading the files I have uploaded, and reading the tutorial.
Click to expand...
Click to collapse
Finally got the process started,...but after 7s I got and error message Reached the end of the file.(0x80070026: Receiving hello packet)
Could it be my PC (win 10 32 bit) problem or what do you think?

This happened to me as well, the first and second time I tried the flash. There is a trick which worked for me... I pulled the battery out and put it back in and while holding the volume 'up' button, I plugged my phone into my computer usb port and let windows install the driver. It took a few seconds and then I clicked 'refresh' on the Miflash window, which I had left on. At this point the 'flash' button became available and I clicked on it. This time the flash was successful. Try it.

Bricked Idol 3 (5.5) ANY help is widely appreciated, please

Do people even check these things anymore? My phone is HARD BRICKED. The screen won't turn on, only the white LED is flashing when I plug it in, and before anyone asks, NO I CAN'T ENTER DOWNLOAD MODE/RECOVERY. My phone only shows up as a Qualcomm device. If you see this, at least tell me if I can fix it or not. I've tried Mobile Upgrade Q, Panasonic Eluga, and QFIL software but they all FAILED. What am I missing?? Oh and can someone PLEEEASE link me to an Alcatel Idol 3 stock Lollipop ROM because I'm dying here. Don't suggest Mobile Upgrade Q for getting the stock ROM. Refer to my last post for a less stressful details. Thaaanks.

Use Panasonic Eluga Switch program and what error did you get?
Sent from my TCL IDOL3 using Tapatalk

I got Error Code 5002. I can't get my phone into Download / Recovery, but if I press the power button for a really long time while connected to my PC, my PC makes a USB disconnect sound. My phone still shows up in Device Manager if I do this though.

Give me Teeamviewer id and pass at PM later and i will help you
Sent from my TCL IDOL3 using Tapatalk

So I have to make a Teamviewer account now or what?
edit: ah nevermind, I just downloaded it. I'll give it to you in like, 2 hours. Is that alright?

same proble, any hope?
Alek Dev said:
Give me Teeamviewer id and pass at PM later and i will help you
Sent from my TCL IDOL3 using Tapatalk
Click to expand...
Click to collapse
hi! i'm having the same issue with my phone...any hope?
would it be too much to ask if you could you help me?

booting from SD card?
artpadgett said:
hi! i'm having the same issue with my phone...any hope?
would it be too much to ask if you could you help me?
Click to expand...
Click to collapse
sry for the double post, but maybe this is indeed hopeless. I've been playing with the idea of booting it up with an SD card though... I might as well try since my phone is already dead and after trying everything else, nothing seems to help or unbrick my phone... if I manage to find something interesting, i'll post it here or make a new thread.

Did you solve this problem?