hi man
i have one jasjar and my device dont turn on,only red light work in charging
and when i go to in bootloader i see this message "DOC version is error"
any body can help me?! how can i fix my device
majdifar said:
hi man
i have one jasjar and my device dont turn on,only red light work in charging
and when i go to in bootloader i see this message "DOC version is error"
any body can help me?! how can i fix my device
Click to expand...
Click to collapse
Have you tryied to hard rest, or look for HTC Universal in the XDA Wiki there is all information you may need. Good Luck
i do this too man but dont work
Reza WM said:
i do this too man but dont work
Click to expand...
Click to collapse
Try use MTTY tool if you stuck in the bootloader. Remove the sim card, The SD Card and have your battery fully charged. When u use mtty you must disable active sync's usb connectoin on ur pc so the mtty can connect through this port. What is the status of your device at the moment? what happens when u connect it to your pc?
here is my problem with mtty
majdifar said:
hi man
i have one jasjar and my device dont turn on,only red light work in charging
and when i go to in bootloader i see this message "DOC version is error"
any body can help me?! how can i fix my device
Click to expand...
Click to collapse
Hi, Your Battery Is Dead, U Need To Change One. It Does Not Link To DOC Format. I Have This Problem Before.
Hope It Helps
Related
i have tired v3 wm6 update and..after the update my screen is stuck...at o2 sign..with bubbles,, the four red words appear on the screen but doesn't change anything...
i'd like to reflash back but it doesn't seem like connecting to PC via USB..
what do i do...?
and i found..
it just stopps in the boot loader mode and turns to black screeen .. and that's it...
I cna't even connect to USB so which means i can't flash back to normal..
is there any suggestions??
like resseting back up?
I have tried soft and hard reset but both don't seem to work.. still stuck in the bootloader mode....
What do I DO>>>>>>>>>>>>>....please help me...><
Try to Enter Bootloader:
Hold down the camera button and reset the device. (Boot Loader Mode is: Press Camara + Soft Reset, then release soft reset and keep pressing camara button till appear the Boot Loader.)
However, you have to write in the right post, i guess you mean the Ohlala_WWE_WM6_v3 ROM. If you had read the entire post youl'd know that this one is bad. V4 should solve the problem.
thanks for your answer !!but..
yes i have entered to that 3 coloured mode(bootloader mode like you said)
and I have connected my usb and it showed USB on the left corner ...
but the problem is...after I connect usb.. computer doesn't recognize my O2 device so I can't reflash my rom with SMart 1.
I ran the file called "upgrade_rom" for smart1 wm6 but it keeps telling me that "no device found.." so..
what should i do...
please help me...
and i really thank you for your response!
llvll said:
yes i have entered to that 3 coloured mode(bootloader mode like you said)
and I have connected my usb and it showed USB on the left corner ...
but the problem is...after I connect usb.. computer doesn't recognize my O2 device so I can't reflash my rom with SMart 1.
I ran the file called "upgrade_rom" for smart1 wm6 but it keeps telling me that "no device found.." so..
what should i do...
please help me...
and i really thank you for your response!
Click to expand...
Click to collapse
You cannot use "upgrade_rom.bat" to flash ur device with RGB screen. The bat file is for upgrade, not for fresh install. It means that you have to install AKU2.xx NVID.exe (executable) first. The .exe file can recognize ur device via RGB screen.
After reset ur device with AKU2.x and successfully connect to the PC vis Activesync, you then can run upgrade_rom.bat.
And... don't be too panic. You have to read more.
thank you so much !!
i' ll try it right now !! omg ...i'm so relived that I got an answer !!!
you are the best!
um...
i search it thru the forum.. but i Can't seem to find that file... AKU2 .xx.nvid..
can you please direct me to download that program?..
please... thanks again !
llvll said:
i search it thru the forum.. but i Can't seem to find that file... AKU2 .xx.nvid..
can you please direct me to download that program?..
please... thanks again !
Click to expand...
Click to collapse
here http://www.4shared.com/file/12240109/ca99469a/RUU_Prophet_220734_2207114_024721_NVID.html
thanks !!!
is there an o2 version of NVID??? anywhere? i've just installed this but it says Qteck..
No it's a Qteck ROM not an O², I don't know if there is a 2.20 NVID ROM from O² here, sorry.
i've just installed AKU...thing
after installing AKU...
my phone doesn't seem like it can connect to Antisync program..
is there any reason why..this is happpenin..?
make hard reset after flash firmware!
yese !!
i did the hard reset but still Activesync says It cannot be connected...
is there any other way to fix this???
I don't no if this can help but.. my device orignally was O2 and now i flashed up with Qteck AKU...
does this matter...?
if then would you let me know where i can find o2 AKU file..please...?
thanks for your reply !
you could try this. Someone else posted it here, and when my phone stopped connecting after some update it fixed activesync. It's a switch.
llvll said:
i did the hard reset but still Activesync says It cannot be connected...
is there any other way to fix this???
I don't no if this can help but.. my device orignally was O2 and now i flashed up with Qteck AKU...
does this matter...?
if then would you let me know where i can find o2 AKU file..please...?
thanks for your reply !
Click to expand...
Click to collapse
Had O2 ever released HTC Prophet?
Sorry but I'm not O2 fan.
I have only Prophet so I know only Prophet.
You could go to the right thread for ur device O2 and look for the right .exe file.
PS: is it XDA Neo? If it is Prophet it should be OK.
Try holding Camera+Comm buttons during pressing reset button ur device will ask u to Format something. Press send button (green phone button) and try again.
Safe
Thanks guys, you saved my S200
Matos
Ohyea !!
I found the solution !!! dat Qteck one worked but um....
yea and my phone is Xda Neo !!!
the black one !
thanks for all the replies guys !!!!!!!
Whoohoo, thanx for mentioning the bootloader mode (by only holding the camera button ) Now I can try another WM6 rom, which does work I hope
hello there same problem here.. mine is also xda neo.. when trying to upgrade wm6 it stuck exactly same as yours..how did u fix the problem? thanx for ur advice
Im Using Imate Jamin (g4) And I Wanted To Upgrade To Wm6.1, While Running The Hard Spl My Phone Turns To White Screen.. And Active Sync Doesnt Recognise My Phone Any More... Pls Help Me Guys..
THere are many posts like this.
Did u do your reading before flashing? Are you using Vista, if so get on a computor running XP, u cannot flash with vista.
Did you unplugg all ur usb devices and any other connection software? Try also other usb ports. I had to try 3 of my 4 before flashing worked for me.
Please read the wiki and search the forums tho, there are many good guides out there like this one attached (apols for zip file, i had saved the web page for use ages ago)
You also dont say what ur IPL/SPL numbers are so its difficult to help, you should list the steps when posting if you need help
Get back if you need more help...
ginbuko said:
Im Using Imate Jamin (g4) And I Wanted To Upgrade To Wm6.1, While Running The Hard Spl My Phone Turns To White Screen.. And Active Sync Doesnt Recognise My Phone Any More... Pls Help Me Guys..
Click to expand...
Click to collapse
Hi, I had similar problem even after repeated tries. What I did to get around it was:
1) Run the HardSPL (from Prophet tools or from RUU).
2) Check "I understand the caution..." and click next to get to 2nd screen (see attachment) on RUU where it gives you the 4 things to check before proceeding (here your Prophet must be entering the white screen).
3) Leave the RUU on the 2nd screen on the computer and disconnect Prophet after white screen gets stuck and activesync disconnects).
4) Reboot Prophet.
5) Reconnect Prophet and wait for activesync connection to be established.
6) Now on the computer check "I completed the steps indicated above" and click on next.
Hopefully this should go ahead and HardSPPL your Prophet.
Do let us know if this worked.
possible solution for ya
Code:
ginbuko said:
Im Using Imate Jamin (g4) And I Wanted To Upgrade To Wm6.1, While Running The Hard Spl My Phone Turns To White Screen.. And Active Sync Doesnt Recognise My Phone Any More... Pls Help Me Guys..
Click to expand...
Click to collapse
Hey,same problem here...but you probably got rid of the prophet already...well hope it helps someone else
thank God i had surfed to other sites and found this HARD SPL utility.
Its in "wm6 Update_Package" ...might as well be from here..
(dont know who made it-i`ve been downloading so much stuff lately from the web no offence )
maan...how do I add an attacment here?
ahah-here it is..
hey...what`s up with this...cant upload...its under 8mb,why is it bugging me with "upload of file failed"?
ok...this means war..
anyway here is the link http://rapidshare.com/files/233302800/HardSPL_G3_and_G4.rar.zip.html
ginbuko said:
Im Using Imate Jamin (g4) And I Wanted To Upgrade To Wm6.1, While Running The Hard Spl My Phone Turns To White Screen.. And Active Sync Doesnt Recognise My Phone Any More... Pls Help Me Guys..
Click to expand...
Click to collapse
pinoy ka gin???
text mko kung malapit ka lang sa manila.. help kita...
09085524216
Hi
where i can download hardspl for g4?
hi guy
i have one magic 32a and i dont know what happend go to this problem
when i turn on this screen is like attachment
and i cant go to hboot & recovery mod
what can i do?! any one help me?
reza_majd said:
hi guy
i have one magic 32a and i dont know what happend go to this problem
when i turn on this screen is like attachment
and i cant go to hboot & recovery mod
what can i do?! any one help me?
Click to expand...
Click to collapse
any one help me?!! plz
had the same error !
I send it to repair service. ! they changed the mainboard of the phone.
So ! There is no other chance !
It was a warranty.
Can you run into fastboot (back+power)?
cnossa said:
Can you run into fastboot (back+power)?
Click to expand...
Click to collapse
no i cant run any thing
fast boot,recovery,and... every u think
did u use ruu before this problem came?
Same to me...
have the same problem in my phone. I could not find the solution. I'm waiting for your help
adb
Can you access your phone through adb?
Can you access your phone through adb?
darsic said:
Can you access your phone through adb?
Click to expand...
Click to collapse
no cant access with anything
I got the same problem. It happened when I flashed corrupted radio image. Now when I turn it on the package and arrow picture appears and after few second lots of different colors appear. Can't access it in any way. I understand there is radio boot mode when you press trackball and power at the same time. The blue LED shines. I can't do anything in that mod too. Is there anyone who could help us? If not, does anyone know how much is the motherboard replacement? I don't have any type of warranty.
I have same problem with my phone, after radio update
...
Look at these two forums .. try EVERYTHING!!
http://forum.xda-developers.com/showthread.php?t=571457
&&&&
http://forum.xda-developers.com/showthread.php?t=647213
GOOD LUCK!
same pictrue on my magic
after update radio...it's not boot and not do it everything
i think i found d solution actualy i was flashing a rom but 99% it stopped, nd mah fone in bootloader mod, trying 2 flash again but cudnt got succes i hve tried mtty 1.42 utility also,,nw after serched many thread i m dwnloading d bottom rom http://rapidshare.com/files/43423464/Xda_MiniS_LaunchROM_v154102.exe nd i will try dis
arundhiman said:
active synchronisation doest work in bootloader mod
please help becase of my wizard in bootloder mod when i was flashing it light gone nd it is now in in bootloder moid nd active synchronisation not work
it shows datacable not recognise when i cnnect it
and upgrade error is ppc not cnnected or active synchronisation not working properly
Click to expand...
Click to collapse
but you still can flash from bootloader (many times i have flashed using the bootloader.....)
and yes, the PC dont recognize your WIZARD on bootloader mode, but still you do not need to be "syncro" to flasha rom on the WIZARD.
I strongly suggest you to read some info to know "how to" flash a semi bricked device
Good luck
can i delete mah dis post how
arundhiman said:
can i delete mah dis post how
Click to expand...
Click to collapse
lolwut?lolwut?lolwut?lolwut?lolwut?lolwut?
arundhiman said:
can i delete mah dis post how
Click to expand...
Click to collapse
because of till now there is no solution i get, wenever i cnnect via usb everything is right but cnt do flash ipl spl both are 2.26 and usb shows bottom but shows updating error not connect to pda
i am cmes again there
plz help is my device is totaly bricked or not
...it is..stuck in bootloader screan no hard reset possible cover it....and shows not connect with usb or cradel wenever i m upgrading
Hi there , I was trying to use JuonuputBear to S-OFF my phone through the wire trick , so I was doing the wire trick (after several failing tries) , and somehow the phone was a total brick , doesn't take usb or charge led ... So I looked into this and I found a QHSUSB_DLOAD fix for that , however my phone doesn't even enter or appear as it is in that mode , I tried doing the wire trick while the phone is dead it didn't work , I tried my linux machine the QHSUSB_DLOAD the phone wasn't found ! I guess the bootloader was wiped when Jounuput bear was doing its stuff , plz help me guys !
EDIT : I don't think anymore the bootloader is wiped since I didn't reach the part where it installs JuonuptBear's bootloader ! PLease any ideas !
you should have posted this in the Q&A section. You arent going to get much help here, just people ranting on the fact that you posted a question in the development issue. Mods should probably move this to that section. As for your problem, i can't really help. sorry
thx , I will tell a mod to move my thread :'(
Have you tried using the Sensation unbrick thread?
try unbricking project or ask in juopunutbear's thread
It tells me to use QHSUSB , which isn't working for me , may you plz link me to it so I could ensure ?
seaskyways said:
It tells me to use QHSUSB , which isn't working for me , may you plz link me to it so I could ensure ?
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=1522351
rzr86 said:
http://forum.xda-developers.com/showthread.php?t=1522351
Click to expand...
Click to collapse
My phone is not being detected , I removed everything , I try to detect , nop ...
seaskyways said:
My phone is not being detected , I removed everything , I try to detect , nop ...
Click to expand...
Click to collapse
while doing the juopunutbear method did you have enough battery?
if not remove battery,sdcard and sim and charge it as it is for 5-6 hours
then put them back and switch on the device normally
I had 99% charge !
seaskyways said:
I had 99% charge !
Click to expand...
Click to collapse
did you check the troubleshoot from the guide you used?
edit:it is better to post your issue also in the thread you used
Troubleshooting in the jounuputbear thread is for live phones , not for dead phones ...
Any help guys ?!?!
seaskyways said:
Any help guys ?!?!
Click to expand...
Click to collapse
the only thing i can tell you is use jtag.
i am out of ideas
Thats what I finally thought about , but I know nothing at all about JTAG , I need professionel help
EDIT : Maybe AdamOutler :?
seaskyways said:
Thats what I finally thought about , but I know nothing at all about JTAG , I need professionel help
EDIT : Maybe AdamOutler :?
Click to expand...
Click to collapse
i never used jtag.i have no experience on it
you can go in a local repair shop.probably they can fix it
I got it to boot !!! I re-ran the joupunut thing , and tried doing the wire-trick before the phone even shows any sign , instantly the PC showed that qhsusb mode , and everything went alrighty !! Maybe this can be an answer for others !
seaskyways said:
I got it to boot !!! I re-ran the joupunut thing , and tried doing the wire-trick before the phone even shows any sign , instantly the PC showed that qhsusb mode , and everything went alrighty !! Maybe this can be an answer for others !
Click to expand...
Click to collapse
troubleshoot
glad for you man
seaskyways said:
I got it to boot !!! I re-ran the joupunut thing , and tried doing the wire-trick before the phone even shows any sign , instantly the PC showed that qhsusb mode , and everything went alrighty !! Maybe this can be an answer for others !
Click to expand...
Click to collapse
Hello, I am having a simliar issue with the Windows driver error coming up when trying to get S-Off after the wire trick. I was able to restore fine, but everytime I am about to get a successful wire trick it gives me the driver error.
Can you tell me what you did? Thank you!
whohitme said:
Hello, I am having a simliar issue with the Windows driver error coming up when trying to get S-Off after the wire trick. I was able to restore fine, but everytime I am about to get a successful wire trick it gives me the driver error.
Can you tell me what you did? Thank you!
Click to expand...
Click to collapse
Please try and use my Guide here http://forum.xda-developers.com/showthread.php?t=2247319 i am very confident if used it will be fine and should let you proceed without any errors