i have tired v3 wm6 update and..after the update my screen is stuck...at o2 sign..with bubbles,, the four red words appear on the screen but doesn't change anything...
i'd like to reflash back but it doesn't seem like connecting to PC via USB..
what do i do...?
and i found..
it just stopps in the boot loader mode and turns to black screeen .. and that's it...
I cna't even connect to USB so which means i can't flash back to normal..
is there any suggestions??
like resseting back up?
I have tried soft and hard reset but both don't seem to work.. still stuck in the bootloader mode....
What do I DO>>>>>>>>>>>>>....please help me...><
Try to Enter Bootloader:
Hold down the camera button and reset the device. (Boot Loader Mode is: Press Camara + Soft Reset, then release soft reset and keep pressing camara button till appear the Boot Loader.)
However, you have to write in the right post, i guess you mean the Ohlala_WWE_WM6_v3 ROM. If you had read the entire post youl'd know that this one is bad. V4 should solve the problem.
thanks for your answer !!but..
yes i have entered to that 3 coloured mode(bootloader mode like you said)
and I have connected my usb and it showed USB on the left corner ...
but the problem is...after I connect usb.. computer doesn't recognize my O2 device so I can't reflash my rom with SMart 1.
I ran the file called "upgrade_rom" for smart1 wm6 but it keeps telling me that "no device found.." so..
what should i do...
please help me...
and i really thank you for your response!
llvll said:
yes i have entered to that 3 coloured mode(bootloader mode like you said)
and I have connected my usb and it showed USB on the left corner ...
but the problem is...after I connect usb.. computer doesn't recognize my O2 device so I can't reflash my rom with SMart 1.
I ran the file called "upgrade_rom" for smart1 wm6 but it keeps telling me that "no device found.." so..
what should i do...
please help me...
and i really thank you for your response!
Click to expand...
Click to collapse
You cannot use "upgrade_rom.bat" to flash ur device with RGB screen. The bat file is for upgrade, not for fresh install. It means that you have to install AKU2.xx NVID.exe (executable) first. The .exe file can recognize ur device via RGB screen.
After reset ur device with AKU2.x and successfully connect to the PC vis Activesync, you then can run upgrade_rom.bat.
And... don't be too panic. You have to read more.
thank you so much !!
i' ll try it right now !! omg ...i'm so relived that I got an answer !!!
you are the best!
um...
i search it thru the forum.. but i Can't seem to find that file... AKU2 .xx.nvid..
can you please direct me to download that program?..
please... thanks again !
llvll said:
i search it thru the forum.. but i Can't seem to find that file... AKU2 .xx.nvid..
can you please direct me to download that program?..
please... thanks again !
Click to expand...
Click to collapse
here http://www.4shared.com/file/12240109/ca99469a/RUU_Prophet_220734_2207114_024721_NVID.html
thanks !!!
is there an o2 version of NVID??? anywhere? i've just installed this but it says Qteck..
No it's a Qteck ROM not an O², I don't know if there is a 2.20 NVID ROM from O² here, sorry.
i've just installed AKU...thing
after installing AKU...
my phone doesn't seem like it can connect to Antisync program..
is there any reason why..this is happpenin..?
make hard reset after flash firmware!
yese !!
i did the hard reset but still Activesync says It cannot be connected...
is there any other way to fix this???
I don't no if this can help but.. my device orignally was O2 and now i flashed up with Qteck AKU...
does this matter...?
if then would you let me know where i can find o2 AKU file..please...?
thanks for your reply !
you could try this. Someone else posted it here, and when my phone stopped connecting after some update it fixed activesync. It's a switch.
llvll said:
i did the hard reset but still Activesync says It cannot be connected...
is there any other way to fix this???
I don't no if this can help but.. my device orignally was O2 and now i flashed up with Qteck AKU...
does this matter...?
if then would you let me know where i can find o2 AKU file..please...?
thanks for your reply !
Click to expand...
Click to collapse
Had O2 ever released HTC Prophet?
Sorry but I'm not O2 fan.
I have only Prophet so I know only Prophet.
You could go to the right thread for ur device O2 and look for the right .exe file.
PS: is it XDA Neo? If it is Prophet it should be OK.
Try holding Camera+Comm buttons during pressing reset button ur device will ask u to Format something. Press send button (green phone button) and try again.
Safe
Thanks guys, you saved my S200
Matos
Ohyea !!
I found the solution !!! dat Qteck one worked but um....
yea and my phone is Xda Neo !!!
the black one !
thanks for all the replies guys !!!!!!!
Whoohoo, thanx for mentioning the bootloader mode (by only holding the camera button ) Now I can try another WM6 rom, which does work I hope
hello there same problem here.. mine is also xda neo.. when trying to upgrade wm6 it stuck exactly same as yours..how did u fix the problem? thanx for ur advice
Related
yesterday i got Jamin but wid old rom
i downloaded the latest unbranderd dopod rom from ftp.xda-devel....
but after completion of all updating my jamin is no longer starts
it is just blinking
screen flashs and didnt disply any thing
i am soo worried plz any body help meeee
i think there is something wrong wid bootloader,
any body knows
plz help
thanks
araheels said:
yesterday i got Jamin but wid old rom
i downloaded the latest unbranderd dopod rom from ftp.xda-devel....
but after completion of all updating my jamin is no longer starts
it is just blinking
screen flashs and didnt disply any thing
i am soo worried plz any body help meeee
i think there is something wrong wid bootloader,
any body knows
plz help
thanks
Click to expand...
Click to collapse
Try flashing it with the last WWE (non-arabic) version available for download from i-mate site.
thanks bro, i did try to flash but its not connecting, becaz its not on, when i press power button it just blink and not turned on, i am so worried, flash is done when active sync is working and the jamin is turned on, its not on
Most likely the file corrupted.
I dont know how to put Prophet in bootloader mode but can be found in forums.
Try to put the device in bootloader mode; and try to flash afterwards.
Cheers
I have the same problem after flashing with a corrupt rom. Only if i connect the JAMin to the power supply and then press and hold continuously at the camera button and press the power button once the device go to the 'boot loader mode'. But this don't help me because i have no connecting to the PC over USB.
read the forum it's written how you can put it on boot loader mode or you can try to hard reset
I don't find this post .
I try the hard reset but they dont't help.
I don't come in the boot loader mode, only if i connect the device to the power supply it works but now i haven't a connecting to the PC.
If i not connected to the power suppley and press now and hold continuously at the camera button and press the power button once there is now boot loader i see only for one moment
a white screen and also for one moment the blue light in the speaker
can i do not install the rom from my sd-cart ???
have anybody the image from JAMin ??
I have the same problem
Did you find solution ?
Forget about power button.
Press camera button. While holding it use the stylus to softreset. Take the stylus out but hold the camera button pressed. In less than 5 seconds, you will enter bootloader screen.
Hope it works.
You must put your device on to bootloader mode, how? Press the camera and the coomon manager (at the same time) put your stylus into the whole (as you made a normal soft reset) put your stylus out of the device but not the camera and the common manager botton, just a couple seconds after.
Don't be affraid is your device creen become with three colors, is normal nad the typical signal is on to bootloader mode. Now is time to find a JAMin ROM in the club imate web (if you are a member) or here in a ftp.
Tell us if you can fixed the problem.
jamin no boot
dear freind
try to connect the power supply to the cabel to enter to the bootmode and try to do software (i have same problem after flashin the jamin by kjam rom )
SAME PROBLEM AFTER DOWNGRADE CAN SOME ONE POSTE NEW ROM FOR THE IMATE JAMIN
probleme solved who want to know how to solve problem pm me
Any idea?
Do you have the solution???
Thanks
hi im having the same problem can u please inform me how u solved it, as im loosing the bootloader screen when ever i unplug it from the power.
buying a cradle will do the job
Jamin flash error
Hello guys,
I tried to upgrade my Jamin to WM6 and now it dosent load at all so i wanted to go back to original ROM from Jamin but now it says "This NBF file cannot be used for your PDA phone.Please get newer NBF file."
also, previous used to have IMATE logo and now it displays QteK logo and freezes displaying
IPL 1.00
SPL 2.20.0000
GSM 02.47.21
OS 10.2.0.8
Can someone please help me how to get back to WM5 or WM6.
Thanks
Try this
Take a look at this thread - I think you are having the same problem as PianoSam
http://forum.xda-developers.com/showthread.php?t=300356
lordlinus said:
Hello guys,
I tried to upgrade my Jamin to WM6 and now it dosent load at all so i wanted to go back to original ROM from Jamin but now it says "This NBF file cannot be used for your PDA phone.Please get newer NBF file."
also, previous used to have IMATE logo and now it displays QteK logo and freezes displaying
IPL 1.00
SPL 2.20.0000
GSM 02.47.21
OS 10.2.0.8
Can someone please help me how to get back to WM5 or WM6.
Thanks
Click to expand...
Click to collapse
flykthewiz said:
Take a look at this thread - I think you are having the same problem as PianoSam
Thanks flyktewiz,
I did exactly what was told in the thread mention, but now while installing i get the below error
" Error[238]: File Read
The Update Utility can not open the requested file.Please check your Update Utility."
I have closed all the programs that i was using re-started, but still i get this error.
I then tried following http://forum.xda-developers.com/showthread.php?t=291215
and used ROMUpdateUtility_Wizard_NoID.exe instead of the original ROMUpdateUtility.exe and now i get
Error [300]: Invalid Update tool
This update utility cannot be used for your PDA Phone.Please get newer Update Utility
Click to expand...
Click to collapse
The thread has been updated to include Update tools for G4 and G3 that worked for Pianosam - have a look and give the appropriate one a try
http://forum.xda-developers.com/showthread.php?t=300356&page=2
lordlinus said:
flykthewiz said:
Take a look at this thread - I think you are having the same problem as PianoSam
Thanks flyktewiz,
I did exactly what was told in the thread mention, but now while installing i get the below error
" Error[238]: File Read
The Update Utility can not open the requested file.Please check your Update Utility."
I have closed all the programs that i was using re-started, but still i get this error.
I then tried following http://forum.xda-developers.com/showthread.php?t=291215
and used ROMUpdateUtility_Wizard_NoID.exe instead of the original ROMUpdateUtility.exe and now i get
Error [300]: Invalid Update tool
This update utility cannot be used for your PDA Phone.Please get newer Update Utility
Click to expand...
Click to collapse
Click to expand...
Click to collapse
flykthewiz said:
The thread has been updated to include Update tools for G4 and G3 that worked for Pianosam - have a look and give the appropriate one a try
http://forum.xda-developers.com/showthread.php?t=300356&page=2
Thanks for the help, Can you please re-post RUU.ZIP files (or just a link)
Click to expand...
Click to collapse
No
It's in the link - just download it from there!!!!!!
lordlinus said:
flykthewiz said:
The thread has been updated to include Update tools for G4 and G3 that worked for Pianosam - have a look and give the appropriate one a try
http://forum.xda-developers.com/showthread.php?t=300356&page=2
Thanks for the help, Can you please re-post RUU.ZIP files (or just a link)
Click to expand...
Click to collapse
Click to expand...
Click to collapse
help... i downloaded smart1's (normal, not clean) update, and launched UPGRADE_ROM.DAT from PC... it said initializing and everything... and then it reached to "copying something.dll' ... i waited 10 minutes or so then i got something like:
"error cant copy ....... because connection closed from remote... something like that."
i did NOT touch the imate during the process
and now when i turn on my imate i get the HTC with white background for a second but then it freezes on the blue "i-mate" screen... displaying:
IPL 2.13.0001
SPL 2.13.0001
GSM 02.20.21
OS 10.1.0.811
when i connect it to pc, windows does recognise and install my device but ActiveSync doesnt connect.
i tried removing the battery then putting it back in then pressing and holding the conn. button along with the power button and i DO get to the bootloader screen (with three colors) and then when i plug in the usb i get a small 'usb' word at the bottom of the screen, but still, ActiveSync doesnt connect... i tried installing the update again... but the program doesnt find my device
how can i make it work again ??? plz help me
thx in advance
Now you need to find a rom that will install from bootloader mode and not an update........
I don't think you phone is dead
JD
johnnyduk said:
Now you need to find a rom that will install from bootloader mode and not an update........
I don't think you phone is dead
JD
Click to expand...
Click to collapse
i read in another topic what u said above... thx for ur reply...
btw, i'm currently downloading a 56 mb file called:
JAMin_WWE_2130923_21309112_020720_ship.zip
it can be downloaded from:
ftp://ftp.clubimate.com/JAMin_WWE_2130923_21309112_020720_ship.zip
or (better direct link)
http://www.clubimate.com/support/JAMMIN/ROM/JAMin_WWE_2130923_21309112_020720_ship.zip
i suppose this is the file i shoudl install right now using bootleader mode ? right ?
my previous rom version was 2.13.9.23 (same as name of file)
so is this the file i shud be downloading right now ?
thx a lot in advance
Just BEWARE that the rom you download is for your phone, it will be for a G3 or a G4, if you get it wrong, your phone is DEAD.
Please read the wiki and stickies....................................
JD
please. my phone doesnt move. it stuck on login screen.:
any way to restore it? i tried to hard reset, soft reset...nothing..
i tried to install smart 1 and after this happened
Problem solved
Same problem for me, but I solved today:
I connected the phone to pc in bootloader mode, the pc see the phone and says ppc usb sync, but the activesync not started.
I tried to install a qtek official rom by dangaard (you can find it here: http://www.megaupload.com/it/?d=4ELWL078 ) and I solded the problem !
Thanks god!!!!
Please i have the same issue with my O2 XDA Neo - G4, i checked the official site but i don't understand german. Pls someone paste me a link to official Rom.
Twinsis said:
Please i have the same issue with my O2 XDA Neo - G4, i checked the official site but i don't understand german. Pls someone paste me a link to official Rom.
Click to expand...
Click to collapse
ftp://ftp.clubimate.com/JAMin_WWE_213923_2139123_022021_ship.zip
here is the official link for O2 xda or Imate Jamin
Same problem!
I had same problem but in my case with downgrade from WM6 to ASERG rom, i have downloaded RUU_Prophet_220734_2207114_024721_NVID.exe and that fixed my problem.
so i wuz updating my pda to wm6
and after the second step
my pda got an error
and since than i can not
use it. it shows only the HTC innovation and the qtek screen
and than stops...
i tryed hard`n`soft rest
but no hope, i dont know how to fix it, i need only to connect it somehow
trough usb to the pc
so i can put back in the previouse shape
any help would come handy thnx!
if anyone can help me
i am leaving my msn
[email protected] is my adress
and thenx
respect
bagi said:
so i wuz updating my pda to wm6
and after the second step
my pda got an error
and since than i can not
use it. it shows only the HTC innovation and the qtek screen
and than stops...
i tryed hard`n`soft rest
but no hope, i dont know how to fix it, i need only to connect it somehow
trough usb to the pc
so i can put back in the previouse shape
any help would come handy thnx!
if anyone can help me
i am leaving my msn
[email protected] is my adress
and thenx
respect
Click to expand...
Click to collapse
DO NOT PANIC !!
it's funny because I did the same thing when I saw my phone doesn't hard reset! Okay , hold the camera button, while holding the camera soft reset ! keep the camera button until you get to bootloader! ( by this time you will feel much better) then download an original wm5 ROM ( NVID) and upgrade your phone with it. if you didn't understand what i said, you have to read the wiki!
Welcome to the world of PPC junkies !
Hi all
I was upgrade my Jasjar by mistake with jam rom, after upgrading my Jasjar didn't work and the screen didn't show any thing (black screen). Please I need help, if any one can solve this problem give me the solution.
Hi!!!
Take it easy.
Trye to see if the device can go to "bootloader" press "camera"+"on/off"+sof reset.
IF you can go to "boot loader", see the wiki in this forum.
Me too have the same problem, but i was enable to fix-it.
Remove the batery form device, until you find the solution, I think tat you can not charge the batery.
(sorry, by not making links, but I am Flashing my Universal)
Good luck
Thank you, my friend
I tried many times to go to boot loader but I can't, any how I am waiting for the solution.
try this . brightness button + power button + soft reset buton (using ur styles ofcourse) lol . then u enter bootloader the hard way i guess. from there connect the usb althou ur active sync may or may not detect the connection . but on ur fone the serial link wud change to USB . then try flashing a shipped rom 1st then . after that do CID unlock (that if u haven done it yet with ur fone). then flash any rom of ur choice
Look in Wiki... there are many methods =) Wiki rules!!
it saved my exec.. =)
i have the same problem and i treid this way it does not go some one told me that to charge the battary by another jasjar but right now i am not able to find one els to charge the battry..
also i did chat with imate support and they advice me to send it to the service center and i don't know what to do.
even wiki does not have a soultion for that.
I think the bootloader is broken and need to be reinstall but how????
of course you've got this bad rom form ce4ara.com right
it's soo bad
well how can the bootloader b fukd man ?? lol anyways here r the two bootloader editions the instructions to which u can find in universal wiki . here is the link ::
http://wiki.xda-developers.com/index.php?pagename=Universal_Bootloader
well when u connect ur fone in bootloader mode to the pc do u c the "serial" on the top change to "usb" ?? if so go here ::
http://wiki.xda-developers.com/index.php?pagename=Uni_Stuck_Bootloader
get the mtty utility and do as instructed
ps:: dumb azz customer care knows jus two things if u ask them anything about a screwed jasjar. :: install new shipped rom or get to service centre lol. not any other excusehas added to that list as of yet
aahmed12 said:
of course you've got this bad rom form ce4ara.com right
it's soo bad
Click to expand...
Click to collapse
try stable roms and not beta version to test ur fone efficiency for instance for start install jus shippd rom as they are the most stable with almost no bugs ! so always wen u have a broken jasjar n need to b reconstructed innercorely lol use shipped rom. thats wat i do ales lol
I tried these both links before the problem there is no serial or USB on the screen it's completly black no even when you connect it to usb gives u message on computer unrecoginze device then how to upgrade or reinstall bootloader??
with MTTy says usb device not found frist i have to run bootloader again on my jasjar frist to do what writen in wiki
does ur fone charge up by the wall charger n the charging led turns red? ? mayb ur fone not properly charged or so to even enter bootloader ??
I tried all mouthed but I can't fix it, last tried I toke it to the technician and he said the board was damaged.
Thank you,
Sorry for that but first try to charge you battary by another jasjar it might work
okay man .. if u didnt already solve ur prob
i had that prob b4 & here's the steps i took ( i thought i damaged my chip 2 )
1. disable usb connections in active sync 4 now (or remove it from ur pc)
2. get into boot loader by pressing backlight botton+power botton .. dont press soft reset
3. connect ur USB
4. open the MTTY utility .. download it from the wiki if u dont have it
5. press on USB botton on the right of the MTTY window
6. on the window that appears press (enter) ... a wiered word will appear .. press enter again
7. write task 28 55aa (just write it dont copy or it wont work) and press Enter
8 . write task 28 55aa again and press enter
now u can close the MTTY and setup a new rom on ur device .. just choose a proper 1 from this forums
these instructions worked 4 me & i hope u find it useful if u didnt already solved ur problem
jasjar problem
I completely have the same problem with my jasjar and non of these steps worked with me cuz it wont get in a bootloader
(It wont startup at all)
my problem is not solved yet.
Im Using Imate Jamin (g4) And I Wanted To Upgrade To Wm6.1, While Running The Hard Spl My Phone Turns To White Screen.. And Active Sync Doesnt Recognise My Phone Any More... Pls Help Me Guys..
THere are many posts like this.
Did u do your reading before flashing? Are you using Vista, if so get on a computor running XP, u cannot flash with vista.
Did you unplugg all ur usb devices and any other connection software? Try also other usb ports. I had to try 3 of my 4 before flashing worked for me.
Please read the wiki and search the forums tho, there are many good guides out there like this one attached (apols for zip file, i had saved the web page for use ages ago)
You also dont say what ur IPL/SPL numbers are so its difficult to help, you should list the steps when posting if you need help
Get back if you need more help...
ginbuko said:
Im Using Imate Jamin (g4) And I Wanted To Upgrade To Wm6.1, While Running The Hard Spl My Phone Turns To White Screen.. And Active Sync Doesnt Recognise My Phone Any More... Pls Help Me Guys..
Click to expand...
Click to collapse
Hi, I had similar problem even after repeated tries. What I did to get around it was:
1) Run the HardSPL (from Prophet tools or from RUU).
2) Check "I understand the caution..." and click next to get to 2nd screen (see attachment) on RUU where it gives you the 4 things to check before proceeding (here your Prophet must be entering the white screen).
3) Leave the RUU on the 2nd screen on the computer and disconnect Prophet after white screen gets stuck and activesync disconnects).
4) Reboot Prophet.
5) Reconnect Prophet and wait for activesync connection to be established.
6) Now on the computer check "I completed the steps indicated above" and click on next.
Hopefully this should go ahead and HardSPPL your Prophet.
Do let us know if this worked.
possible solution for ya
Code:
ginbuko said:
Im Using Imate Jamin (g4) And I Wanted To Upgrade To Wm6.1, While Running The Hard Spl My Phone Turns To White Screen.. And Active Sync Doesnt Recognise My Phone Any More... Pls Help Me Guys..
Click to expand...
Click to collapse
Hey,same problem here...but you probably got rid of the prophet already...well hope it helps someone else
thank God i had surfed to other sites and found this HARD SPL utility.
Its in "wm6 Update_Package" ...might as well be from here..
(dont know who made it-i`ve been downloading so much stuff lately from the web no offence )
maan...how do I add an attacment here?
ahah-here it is..
hey...what`s up with this...cant upload...its under 8mb,why is it bugging me with "upload of file failed"?
ok...this means war..
anyway here is the link http://rapidshare.com/files/233302800/HardSPL_G3_and_G4.rar.zip.html
ginbuko said:
Im Using Imate Jamin (g4) And I Wanted To Upgrade To Wm6.1, While Running The Hard Spl My Phone Turns To White Screen.. And Active Sync Doesnt Recognise My Phone Any More... Pls Help Me Guys..
Click to expand...
Click to collapse
pinoy ka gin???
text mko kung malapit ka lang sa manila.. help kita...
09085524216
Hi
where i can download hardspl for g4?