Related
Hi there , I was trying to use JuonuputBear to S-OFF my phone through the wire trick , so I was doing the wire trick (after several failing tries) , and somehow the phone was a total brick , doesn't take usb or charge led ... So I looked into this and I found a QHSUSB_DLOAD fix for that , however my phone doesn't even enter or appear as it is in that mode , I tried doing the wire trick while the phone is dead it didn't work , I tried my linux machine the QHSUSB_DLOAD the phone wasn't found ! I guess the bootloader was wiped when Jounuput bear was doing its stuff , plz help me guys !
EDIT : I don't think anymore the bootloader is wiped since I didn't reach the part where it installs JuonuptBear's bootloader ! PLease any ideas !
you should have posted this in the Q&A section. You arent going to get much help here, just people ranting on the fact that you posted a question in the development issue. Mods should probably move this to that section. As for your problem, i can't really help. sorry
thx , I will tell a mod to move my thread :'(
Have you tried using the Sensation unbrick thread?
try unbricking project or ask in juopunutbear's thread
It tells me to use QHSUSB , which isn't working for me , may you plz link me to it so I could ensure ?
seaskyways said:
It tells me to use QHSUSB , which isn't working for me , may you plz link me to it so I could ensure ?
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=1522351
rzr86 said:
http://forum.xda-developers.com/showthread.php?t=1522351
Click to expand...
Click to collapse
My phone is not being detected , I removed everything , I try to detect , nop ...
seaskyways said:
My phone is not being detected , I removed everything , I try to detect , nop ...
Click to expand...
Click to collapse
while doing the juopunutbear method did you have enough battery?
if not remove battery,sdcard and sim and charge it as it is for 5-6 hours
then put them back and switch on the device normally
I had 99% charge !
seaskyways said:
I had 99% charge !
Click to expand...
Click to collapse
did you check the troubleshoot from the guide you used?
edit:it is better to post your issue also in the thread you used
Troubleshooting in the jounuputbear thread is for live phones , not for dead phones ...
Any help guys ?!?!
seaskyways said:
Any help guys ?!?!
Click to expand...
Click to collapse
the only thing i can tell you is use jtag.
i am out of ideas
Thats what I finally thought about , but I know nothing at all about JTAG , I need professionel help
EDIT : Maybe AdamOutler :?
seaskyways said:
Thats what I finally thought about , but I know nothing at all about JTAG , I need professionel help
EDIT : Maybe AdamOutler :?
Click to expand...
Click to collapse
i never used jtag.i have no experience on it
you can go in a local repair shop.probably they can fix it
I got it to boot !!! I re-ran the joupunut thing , and tried doing the wire-trick before the phone even shows any sign , instantly the PC showed that qhsusb mode , and everything went alrighty !! Maybe this can be an answer for others !
seaskyways said:
I got it to boot !!! I re-ran the joupunut thing , and tried doing the wire-trick before the phone even shows any sign , instantly the PC showed that qhsusb mode , and everything went alrighty !! Maybe this can be an answer for others !
Click to expand...
Click to collapse
troubleshoot
glad for you man
seaskyways said:
I got it to boot !!! I re-ran the joupunut thing , and tried doing the wire-trick before the phone even shows any sign , instantly the PC showed that qhsusb mode , and everything went alrighty !! Maybe this can be an answer for others !
Click to expand...
Click to collapse
Hello, I am having a simliar issue with the Windows driver error coming up when trying to get S-Off after the wire trick. I was able to restore fine, but everytime I am about to get a successful wire trick it gives me the driver error.
Can you tell me what you did? Thank you!
whohitme said:
Hello, I am having a simliar issue with the Windows driver error coming up when trying to get S-Off after the wire trick. I was able to restore fine, but everytime I am about to get a successful wire trick it gives me the driver error.
Can you tell me what you did? Thank you!
Click to expand...
Click to collapse
Please try and use my Guide here http://forum.xda-developers.com/showthread.php?t=2247319 i am very confident if used it will be fine and should let you proceed without any errors
master and mister who expert with android. please help me......
my sxl is hardbrick and totally death plese tell me what i can do to fix.....
egisetiyo said:
master and mister who expert with android. please help me......
my sxl is hardbrick and totally death plese tell me what i can do to fix.....
Click to expand...
Click to collapse
You need to provide full details what is happening. Does it switch on? Do you see a flicker when you turn on or what happened and every single bit of detail you think can be helpful. How do you know it's hardbrick. Do you know the difference between soft and hard brick?
Asking a question without details is not going to help. Ask again in details!
help
Hnk1 said:
You need to provide full details what is happening. Does it switch on? Do you see a flicker when you turn on or what happened and every single bit of detail you think can be helpful. How do you know it's hardbrick. Do you know the difference between soft and hard brick?
Asking a question without details is not going to help. Ask again in details!
Click to expand...
Click to collapse
my phone is off totally cant turn on when i push the button power. this hapen after i root my phone. when i charge my sxl, the light indictor is not turn on. sory with my bad english language master and please help me
anyone plese help me
Try Flashing firmware again using flashtool or SUS?
Try to remove the battery for about 10 minutes ,,it should fix the problem
master n mister, i had try all but the problem i cant acses my sxl when i want to flash with flashtool in pc. my sxl is not recgnze. that any trick who can fix this problem? plis share n help me
Do one thing.. Remove Battery, press power button for around 10-12 seconds.. Insert the battery and try to flash again using flashtool..
saurabh007 said:
Do one thing.. Remove Battery, press power button for around 10-12 seconds.. Insert the battery and try to flash again using flashtool..
Click to expand...
Click to collapse
thx u brother saurabh007, but the trick is still not succses. if i use usb jig are working sony?
once again thnx 4 u help i very apriciade
egisetiyo said:
thx u brother saurabh007, but the trick is still not succses. if i use usb jig are working sony?
once again thnx 4 u help i very apriciade
Click to expand...
Click to collapse
Are you sure that you got battery? Can you get same battery from some friend and try to power on your phone?
egisetiyo said:
my phone is off totally cant turn on when i push the button power. this hapen after i root my phone. when i charge my sxl, the light indictor is not turn on. sory with my bad english language master and please help me
Click to expand...
Click to collapse
egisetiyo said:
anyone plese help me
Click to expand...
Click to collapse
egisetiyo said:
master n mister, i had try all but the problem i cant acses my sxl when i want to flash with flashtool in pc. my sxl is not recgnze. that any trick who can fix this problem? plis share n help me
Click to expand...
Click to collapse
egisetiyo said:
thx u brother saurabh007, but the trick is still not succses. if i use usb jig are working sony?
once again thnx 4 u help i very apriciade
Click to expand...
Click to collapse
We can NOT help you until you provide specific details.
Answer these questions :
1.Do you have any idea about how to flash a ROM and how much experience & understanding you have of android?
2.What were you doing when your phone suddenly died?
3.Were you trying to change values of your ROM/kernel or trying to do a mod?
4.Tell me in details how your phone is behaving apart from your term DEAD. When you try to switch on, do you see flickering/ a dull black screen or nothing happens or do you see any slight light in dark.
5.Does it boot into flashmode/fastboot if you try?
6.Have you tried to charge it for few hours and left it there?
7.Are you sure it is NOT battery problem?
8. Did you drop it in any kind of liquid or anything.
9. What do you mean by root here. Your phone died DURING root, AFTER root or what?
I only asked 9 questions but your details must be equal to 20 questions if you are willing to fix your phone as we CAN NOT SHOOT STARS on a CLEAR SUNNY SKY.
siankatabg said:
Are you sure that you got battery? Can you get same battery from some friend and try to power on your phone?
Click to expand...
Click to collapse
yes off course. ok i will try brother
egisetiyo said:
yes off course. ok i will try brother
Click to expand...
Click to collapse
Can you just tell by which method did you root your device?
egisetiyo said:
master and mister who expert with android. please help me......
my sxl is hardbrick and totally death plese tell me what i can do to fix.....
Click to expand...
Click to collapse
just send the phone to the service centre,it is the easiest way
My Xperia L is not turning on
faizur1999 said:
just send the phone to the service centre,it is the easiest way
Click to expand...
Click to collapse
Thank you for the valuable details that have been provided. I am experiencing the same problem with my Xperia L. For Xperia L as per my understanding to get CWM you need custom Kernal and before installing this I was trying to root and unlock bootlader to get custom ROM installled. I am below average user had some experience in flashing and but I did something wrong the phone is totally dead now. Now I am trying to turn it on and go into recovery by using volume button and power button but just red light is blinking no Sony logo. I also try to connect this with PC but it recognized as unknown device. I also tried Sony SUS but PC is not recognizing the phone which I guess is required for SUS and flash tool. Please help me!
egisetiyo said:
yes off course. ok i will try brother
Click to expand...
Click to collapse
Is your sxl showing red led when you connect it to the charger..
If it showing the red led let it charge untill it turns green.
Then try to switch it on..
perivenkal said:
Thank you for the valuable details that have been provided. I am experiencing the same problem with my Xperia L. For Xperia L as per my understanding to get CWM you need custom Kernal and before installing this I was trying to root and unlock bootlader to get custom ROM installled. I am below average user had some experience in flashing and but I did something wrong the phone is totally dead now. Now I am trying to turn it on and go into recovery by using volume button and power button but just red light is blinking no Sony logo. I also try to connect this with PC but it recognized as unknown device. I also tried Sony SUS but PC is not recognizing the phone which I guess is required for SUS and flash tool. Please help me!
Click to expand...
Click to collapse
Try removing your battery for 5 minutes. Then try again and let us know how it goes. Your phone is not bricked, it can be salvaged, question is only if you need to send it in to repair. But first thing first, try removing battery and then come back.
Still Xperia L is not turning on, just giving three red light blinks
Redzo said:
Try removing your battery for 5 minutes. Then try again and let us know how it goes. Your phone is not bricked, it can be salvaged, question is only if you need to send it in to repair. But first thing first, try removing battery and then come back.
Click to expand...
Click to collapse
Thank you Redzo for your kind reply. I did the same but again the red light blinks three times but phone is not turning on and no Sony logo. Still it’s recognized as unknown device by the PC and just also tried on other pc but no luck. Got generic ftt to flash but the phone is still not being recognized by Sony flasher and SUS. Here in Pakistan there is no Sony service centres and I don’t want to give to local vendors. Please advise what should I do more
saurabh007 said:
Do one thing.. Remove Battery, press power button for around 10-12 seconds.. Insert the battery and try to flash again using flashtool..
Click to expand...
Click to collapse
Many many thanks to you Saurabh007.. I thought I've lost my phone but after reading your valuable and helpful words, I get it back, smiling face comes to me again..wow.. thank you so much..
FPThatea said:
Many many thanks to you Saurabh007.. I thought I've lost my phone but after reading your valuable and helpful words, I get it back, smiling face comes to me again..wow.. thank you so much..
Click to expand...
Click to collapse
My pleasure!
Sent from my C2104 using Tapatalk
My Xperia C used rom Xperia-Z-ized™ v0.94. Then I've try installed this rom http://forum.xda-developers.com/showthread.php?t=2729379. When it completed, I've restarted the phone. But it suddenly turn off, then it seems hard brick (Cannot turn it on with power key. when connected charger it has red light). I've anything in http://www.informationlord.com/ultimate-guide-to-fix-bricked-xperia-c/ but still the same.
Anyone can help me solve this problem ? Thanks a lot ^^!
Sorry for my bad English
yeubeo168 said:
My Xperia C used rom Xperia-Z-ized™ v0.94. Then I've try installed this rom http://forum.xda-developers.com/showthread.php?t=2729379. When it completed, I've restarted the phone. But it suddenly turn off, then it seems hard brick (Cannot turn it on with power key. when connected charger it has red light). I've anything in http://www.informationlord.com/ultimate-guide-to-fix-bricked-xperia-c/ but still the same.
Anyone can help me solve this problem ? Thanks a lot ^^!
Sorry for my bad English
Click to expand...
Click to collapse
there is no link for the xperia C how you flash ?? i think you flash the wrong file which causes the hard brick .. i think
lovegurulavdev said:
there is no link for the xperia C how you flash ?? i think you flash the wrong file which causes the hard brick .. i think
Click to expand...
Click to collapse
Yesterday I sent it to Sony service center for warranty
They said: you've waiting for 10-15 days until it repaired
yeubeo168 said:
Yesterday I sent it to Sony service center for warranty
They said: you've waiting for 10-15 days until it repaired
Click to expand...
Click to collapse
thats why have to read everything before trying .. as we dont have uBL and no custom kernel so we must check inside if there any inside zip
yeubeo168 said:
My Xperia C used rom Xperia-Z-ized™ v0.94. Then I've try installed this rom http://forum.xda-developers.com/showthread.php?t=2729379. When it completed, I've restarted the phone. But it suddenly turn off, then it seems hard brick (Cannot turn it on with power key. when connected charger it has red light). I've anything in http://www.informationlord.com/ultimate-guide-to-fix-bricked-xperia-c/ but still the same.
Anyone can help me solve this problem ? Thanks a lot ^^!
Sorry for my bad English
Click to expand...
Click to collapse
I think you have flashed the boot.img from that rom.its hard brick.so you have very less chances on getting it back.you can try the recovery steps posted.
Xenon1978 said:
I think you have flashed the boot.img from that rom.its hard brick.so you have very less chances on getting it back.you can try the recovery steps posted.
Click to expand...
Click to collapse
It cannot go to recovery
You can Try This :
http://forum.xda-developers.com/sony-xperia-c/general/how-to-install-restore-stock-android-t2832005
First.... Sorry for my bad english.....
My xperia L is getting hard bricked. I just unlock boot loader, install phantom kernel and actually it work.
After that i changed the boot splash.... and........ My Xperia L cant boot. It show nothing, cannot boot, cant boot into flah mode or fastboot.
anyone can help me please???
Thank you very much. I'm newbie :crying:
yogagrmy said:
First.... Sorry for my bad english.....
My xperia L is getting hard bricked. I just unlock boot loader, install phantom kernel and actually it work.
After that i changed the boot splash.... and........ My Xperia L cant boot. It show nothing, cannot boot, cant boot into flah mode or fastboot.
anyone can help me please???
Thank you very much. I'm newbie :crying:
Click to expand...
Click to collapse
Hey dude the same thing happened for me.... It doesn't even show the LED. So basically you can't do anything . So u take ur Xperia L to the authorised service center and play innocent. Don't tell them that your phone is bricked. Tell them that its not booting. I did the same thing, my phone was in warranty and I got my phone fixed for free by Sony
saiharsha_b said:
Hey dude the same thing happened for me.... It doesn't even show the LED. So basically you can't do anything . So u take ur Xperia L to the authorised service center and play innocent. Don't tell them that your phone is bricked. Tell them that its not booting. I did the same thing, my phone was in warranty and I got my phone fixed for free by Sony
Click to expand...
Click to collapse
hi Guys,
Have you fixed your problem, i am also facing the same. No Viberation, only 1 time red LED and 1time green LED when connecting to USB/Charger.
I have installed Phantom kernel and after that it is dead.
Please let me know how you have solved your issue, mine is not in warranty.
Fixed
austinanne said:
hi Guys,
Have you fixed your problem, i am also facing the same. No Viberation, only 1 time red LED and 1time green LED when connecting to USB/Charger.
I have installed Phantom kernel and after that it is dead.
Please let me know how you have solved your issue, mine is not in warranty.
Click to expand...
Click to collapse
my phone is fixed now. Just bring them into service center and pay for it :v
just change the machine or motherboard
saiharsha_b said:
Hey dude the same thing happened for me.... It doesn't even show the LED. So basically you can't do anything . So u take ur Xperia L to the authorised service center and play innocent. Don't tell them that your phone is bricked. Tell them that its not booting. I did the same thing, my phone was in warranty and I got my phone fixed for free by Sony
Click to expand...
Click to collapse
Thanks bro. I did it too
[ROM][6.0] CyanogenMod 13.0 [ALPHA] have bricked some XPERIA L devices. So this thread is to help those people who are facing the problem. I came across some methods to recover their Xperia L. Although, I am not sure it will work because I haven't tried it myself (Can't risk bricking my phone on purpose just to check this method which may or may not fix it ). But please go ahead and try it.
It's better to try than to cry!
Click to expand...
Click to collapse
METHOD 1
Remove Battery, press power button for around 10-12 seconds..then press and hold volume up, a Insert the battery , fash tft file using flastool
Source: https://www.youtube.com/watch?v=lycyxdkNlz8 (Comment by KãyRá S.s)
METHOD 2
Disconnect the phone from PC if connected Remove the battery Press and hold the power button for 15-20 seconds Re-insert battery Flash latest FW using flashtool..
Source: https://www.youtube.com/watch?v=lycyxdkNlz8 (Comment by BEST FULLAPPS)
If anyone know a better method or a suggestion please post it...
you can't fix in any way broken partition table, only with jtag and similiar, this all should work for semibricked devices...
Hard Brick......
Flashing_Expert said:
you can't fix in any way broken partition table, only with jtag and similiar, this all should work for semibricked devices...
Click to expand...
Click to collapse
Sir plz help me out i have bricked my device. When i connect it to a charger it shows a greenish light for a second and the it fades out. No detection my pc. It says that it is an unidentified device. actually it happened after i flashed cm13 by olivier. It booted up fine. I then just shut it down to install gapps. But it didnt respond any more.
udaykapoor97 said:
Sir plz help me out i have bricked my device. When i connect it to a charger it shows a greenish light for a second and the it fades out. No detection my pc. It says that it is an unidentified device. actually it happened after i flashed cm13 by olivier. It booted up fine. I then just shut it down to install gapps. But it didnt respond any more.
Click to expand...
Click to collapse
You had to install the latest package.. if u didn't only then u would've got hard bricked... cm13 is now tested by too many people and it runs without bugs.. so it may be the fault with the version of cm13 you used..
udaykapoor97 said:
Sir plz help me out i have bricked my device. When i connect it to a charger it shows a greenish light for a second and the it fades out. No detection my pc. It says that it is an unidentified device. actually it happened after i flashed cm13 by olivier. It booted up fine. I then just shut it down to install gapps. But it didnt respond any more.
Click to expand...
Click to collapse
oh damn another one guy same happened to me with same rom ...
sorry but this means your phone is dead like mine, your bootloader is corrupted so device is unable to boot to kernel nor to system
no flashmode or fastboot mode, you can see it only in device manager (with proper drivers) as qhusb dload 9008
sadly we don't have proper files for QPST software so nobody unbricked his XL to this date
only chance is motherboard replacement
udaykapoor97 said:
Sir plz help me out i have bricked my device. When i connect it to a charger it shows a greenish light for a second and the it fades out. No detection my pc. It says that it is an unidentified device. actually it happened after i flashed cm13 by olivier. It booted up fine. I then just shut it down to install gapps. But it didnt respond any more.
Click to expand...
Click to collapse
btw you had 2 partitions on your microsd? I need to know...
Hi, is it possible to have some more information on the situations with cm13 that have caused a hard-brick? I understood that that the features such as link2sd and app2sd are potentially dangerous? Is this understanding correct? If yes, could you please explain why and under which circumstances this could create troubles?
Do you have any further suggestions on what to avoid?
Many thanks in advance for your expert advice.
I wanted to try cm13 on my spare xperia l, but would like to avoid a hard brick...
Cheers,
Hennng
xleng said:
Hi, is it possible to have some more information on the situations with cm13 that have caused a hard-brick? I understood that that the features such as link2sd and app2sd are potentially dangerous? Is this understanding correct? If yes, could you please explain why and under which circumstances this could create troubles?
Do you have any further suggestions on what to avoid?
Many thanks in advance for your expert advice.
I wanted to try cm13 on my spare xperia l, but would like to avoid a hard brick...
Cheers,
Hennng
Click to expand...
Click to collapse
Its already been fixed in newer builds, also, the developer has stopped the development. But you can surely use CM13 Based ROMs since they also have better editing options.
I really cant wait for cm13. It really pleases me If rom get fixes