Dear friends, today I got SHV-E160S - Korean version of Galaxy Note - and it's very locked.
Tried few times to enter the "pattern" - drawing it on touch screen and now it's locked - I can ONLY enter gmail address and password, or some kind of PIN.
I have no more idea what to do? Any suggestions, how to unlock the phone and enter into the desktop stuff?
Thanks!
malac20 said:
Dear friends, today I got SHV-E160S - Korean version of Galaxy Note - and it's very locked.
Tried few times to enter the "pattern" - drawing it on touch screen and now it's locked - I can ONLY enter gmail address and password, or some kind of PIN.
I have no more idea what to do? Any suggestions, how to unlock the phone and enter into the desktop stuff?
Thanks!
Click to expand...
Click to collapse
PLEASE, HELP me people... what about those jigs at ebay or sending someone to make jtag?
malac20 said:
PLEASE, HELP me people... what about those jigs at ebay or sending someone to make jtag?
Click to expand...
Click to collapse
you don't need jtag for that problem,
all you need to do is hard reset,
take battery off
then put it back
then press VOLUME + and - and then press POWER,
when samsung logo appears, release power button ONLY
then format or wipe and then reboot.
Related
Hello everyone,
After hours of searching I am still "stucked".
I have an I9001 with some sort of password ( Enter password to unlock - with no sim card inside - I mean is not a network unlock code )and I cant get rid off it.
A friend give it to me to solve this matter but I couldn't. He has no idea how the phone comes in this situation ( when u power it on it ask for a password to unlock code ). I tried to enter into "boot" mode ( to wipe/reset the device ) but no succes ( with vol+ and power, with both volume buttons and power, conected or not connected to usb cable ) it's only enter in download mode , or in RAMDUMP MODE ( IF i PRESS VOL+, HOME, AND POWER ). I tried to flash a new firmware, everything was ok, but same problem. I even flashed FeaModRecovery_1.2 but same. Current flash firmware is I9001XXKP4.
When i flash ( with odin ) a firmware it goes ok but at RESET time , computer ask for installing an UNKNOWN device, I am ignoring this instalation and everything (seems ) is ok, but then, again, when I power the device it ask for that password.
Any ideea what shall I do?
Any advice(s) is more than apreciated.
Thanks in advance.
mihnea_gsm said:
Any ideea what shall I do?
Any advice(s) is more than apreciated.
Thanks in advance.
Click to expand...
Click to collapse
I'm sorry but as I cannot know the original source of the phone, I'm sure that your friend forgot their password ..... but as I cannot guarantee this ..... then the only advice I can give you is to return it to the original dealer and ask them to unlock it for you.
Thanks for your reply.
It is probably the only available solution, since any other method(s) to reset the device failed.
If anyone knows any other way to reset it, please let me know, in case he can not send it back to provider/dealer for solve this issue.
Regards.
hello everyone
I have one clone n7100 purchased. (mtk6577)
now I have a problem.
I can not unlock my screen and my PIN not import because the touchscreen does not respond.
through the factory mode, I can't reset the phone.
schreenshots in the attach
what should I do to get my screen to get working?
greetz
Bart
bartje98 said:
hello everyone
I have one clone n7100 purchased. (mtk6577)
now I have a problem.
I can not unlock my screen and my PIN not import because the touchscreen does not respond.
through the factory mode, I can't reset the phone.
schreenshots in the attach
what should I do to get my screen to get working?
greetz
Bart
Click to expand...
Click to collapse
The Problem with the screen unlock can easily be acheived through adb terminal , and the reset controller in recovery mode is up(volume+) , down(volume-) , accept(either touch any part in the screen or the left buttom beside the home screen)
Hi Guys.
So I downloaded the new A5 (2016) ROM for our samsung galaxy j700F and put it in the sd card.
When I boot to recovery, (shut down + volume up + power + home) it shows
Custom Binary is blocked by FRP Lock in red letters and the phone shuts down (does not boot into recovery)
I took out the battery and inserted it again. Again the same problem.
But when i Simply turn it off holding power button, it turns on (no bootloop)
Then my question is guys what seems to be the problem? How can it be solved because i am dying to try this new ROM.
Please Help
Thanks in advance (don't worry i will click the thanks button too :laugh: )
Thanks & Regards
AyushJ
Ayushj702 said:
Hi Guys.
So I downloaded the new A5 (2016) ROM for our samsung galaxy j700F and put it in the sd card.
When I boot to recovery, (shut down + volume up + power + home) it shows
Custom Binary is blocked by FRP Lock in red letters and the phone shuts down (does not boot into recovery)
I took out the battery and inserted it again. Again the same problem.
But when i Simply turn it off holding power button, it turns on (no bootloop)
Then my question is guys what seems to be the problem? How can it be solved because i am dying to try this new ROM.
Please Help
Thanks in advance (don't worry i will click the thanks button too :laugh: )
Thanks & Regards
AyushJ
Click to expand...
Click to collapse
Go in developer option and enable oem unlocking
Mandy $ingh said:
Go in developer option and enable oem unlocking
Click to expand...
Click to collapse
already enabled
reflash firmware bro..
Ayushj702 said:
Hi Guys.
So I downloaded the new A5 (2016) ROM for our samsung galaxy j700F and put it in the sd card.
When I boot to recovery, (shut down + volume up + power + home) it shows
Custom Binary is blocked by FRP Lock in red letters and the phone shuts down (does not boot into recovery)
I took out the battery and inserted it again. Again the same problem.
But when i Simply turn it off holding power button, it turns on (no bootloop)
Then my question is guys what seems to be the problem? How can it be solved because i am dying to try this new ROM.
Please Help
Thanks in advance (don't worry i will click the thanks button too :laugh: )
Thanks & Regards
AyushJ
Click to expand...
Click to collapse
Search from google, FRP unlock
Custom binary blocked by FRP
Ok, so I have the same problem. So I attempted to reflash the firmware, successfully, did not allow me to remove the FRP. Tried the reset method I have for odin, works for phones 2016 and older, not this phone, nor my other J3's. Any input would be greatly appreciated.
CAustin318 said:
Ok, so I have the same problem. So I attempted to reflash the firmware, successfully, did not allow me to remove the FRP. Tried the reset method I have for odin, works for phones 2016 and older, not this phone, nor my other J3's. Any input would be greatly appreciated.
Click to expand...
Click to collapse
I had the same problem ,my device didn't accept any stock or custom roms ,you will need to try many stock roms until you find a one that your device will work with, but it will not get the device totally stock ,This is what happened to my device J700H now I am searching for a way to get around the error " sw rev check fail device 3 binary 2"
I hope my words help you ......
Hi guys,
I have a Samsung S8 which a parent left for me and went back overseas the problem is that it's fingerprint locked.
What should i do ? Flash ?
Note: I think he has a google account on it too
Anyone , help please
Jazzi1903 said:
Hi guys,
I have a Samsung S8 which a parent left for me and went back overseas the problem is that it's fingerprint locked.
What should i do ? Flash ?
Note: I think he has a google account on it too
Anyone , help please
Click to expand...
Click to collapse
Have you tried doing a Hard Reset (Factory Reset)?
Go into recovery by holding the VOL UP + BIXBY BUTTON + POWER BUTTON and perform a factory reset from there
As for my phone, I can unlock screen by a PIN number as an alternative to fingerfoot.
Tiqqy said:
Have you tried doing a Hard Reset (Factory Reset)?
Go into recovery by holding the VOL UP + BIXBY BUTTON + POWER BUTTON and perform a factory reset from there
Click to expand...
Click to collapse
Don't do that or it will trigger frp lock if OEM unlocking wasn't enabled
Hi everyone. So i have a weird problem with my friend's A51 galaxy. He told me to try and fix it, because he tought the phone was in boot loop. The phone is displaying logo samsung a51 knox etc. But when i tried to hold volume down+ power button it wont let me into recovery, it just restarts the phone and logo appears again. Holding volume up + power button doesnt help either. However i managed to jump into odin download mode by pressing volume up and down at the same time and connect cable. Now i have downloaded the correct firmware and managed to flash it, it was success, or so i thought. The phone restarted logo showed up and then small android logo saying "erasing" then it shows galaxy a51 knox, and its stuck again. I have noticed that the phone works, because the samsung talkback is saying to tap options to setup a phone and touchscreen works, but im just blindly going trough menus, and the voice is listing options but i cant setup phone like that. So can you guys please help me, is the issue display, or hardware, i have never encountered problem like this. Thank you all in advance and sorry for the long post.
You need to ask your friend for his google account email and password. You can't factory erase a Knox-locked phone without these.
Snakeforhire said:
You need to ask your friend for his google account email and password. You can't factory erase a Knox-locked phone without these.
Click to expand...
Click to collapse
But i managed to flash it with odin. If the phone display is stuck on logo but the touchscreen works and i have enter the phone setup, does it mean its hardware faulty? What could be the issue?
Metal_Gear said:
But i managed to flash it with odin. If the phone display is stuck on logo but the touchscreen works and i have enter the phone setup, does it mean its hardware faulty? What could be the issue?
Click to expand...
Click to collapse
If it is knox-locked the phone will factory reset or flash as normal, but you'll still need the google acct that was associated with it if you want to reconfugure it, otherwise you're up the creek without a paddle.