Hello everyone,
After hours of searching I am still "stucked".
I have an I9001 with some sort of password ( Enter password to unlock - with no sim card inside - I mean is not a network unlock code )and I cant get rid off it.
A friend give it to me to solve this matter but I couldn't. He has no idea how the phone comes in this situation ( when u power it on it ask for a password to unlock code ). I tried to enter into "boot" mode ( to wipe/reset the device ) but no succes ( with vol+ and power, with both volume buttons and power, conected or not connected to usb cable ) it's only enter in download mode , or in RAMDUMP MODE ( IF i PRESS VOL+, HOME, AND POWER ). I tried to flash a new firmware, everything was ok, but same problem. I even flashed FeaModRecovery_1.2 but same. Current flash firmware is I9001XXKP4.
When i flash ( with odin ) a firmware it goes ok but at RESET time , computer ask for installing an UNKNOWN device, I am ignoring this instalation and everything (seems ) is ok, but then, again, when I power the device it ask for that password.
Any ideea what shall I do?
Any advice(s) is more than apreciated.
Thanks in advance.
mihnea_gsm said:
Any ideea what shall I do?
Any advice(s) is more than apreciated.
Thanks in advance.
Click to expand...
Click to collapse
I'm sorry but as I cannot know the original source of the phone, I'm sure that your friend forgot their password ..... but as I cannot guarantee this ..... then the only advice I can give you is to return it to the original dealer and ask them to unlock it for you.
Thanks for your reply.
It is probably the only available solution, since any other method(s) to reset the device failed.
If anyone knows any other way to reset it, please let me know, in case he can not send it back to provider/dealer for solve this issue.
Regards.
Related
hi
i tried to unlock the phone, but it is dead. the screen is flashing, when i turn it on
when i use Power+Vol Up + center key, i enter in (Emergency Dload Arm9 Mode).
when i use Power+vol Down+center key, i get the Doanloading screen
i tried to use odin to install a new Rom, but when it finish, the phone keep flashing
can any body help me?
abasha said:
hi
i tried to unlock the phone, but it is dead. the screen is flashing, when i turn it on
when i use Power+Vol Up + center key, i enter in (Emergency Dload Arm9 Mode).
when i use Power+vol Down+center key, i get the Doanloading screen
i tried to use odin to install a new Rom, but when it finish, the phone keep flashing
can any body help me?
Click to expand...
Click to collapse
Sorry to hear that, you are not the only one who has the same problem!
You can find some help here: Ace unlock
Edit: I found a fresh topic here Hope it helps!
Hello, I've been the whole day reading about this problem, and didn't found anything, have been 8 hours trying to restore my phone, but unsucsefully.
I've tryed to install a Custom ROM on my Tinji 9300, but I selected to Flash the "PRELOADER" option, and now I'm unable to fix it...
The device connects to the PC in Recovery Mode pressing Volume UP & Volume Down & Home & Power Button and being the battery unplugged. After I plug the USB and the the Battery and recognizes the phone, it's not totally Bricked. The Screen doesn't light up and nothing happens, but it writes on FlashTool.
I attached the screen of the error, I don't know what to do anymore, I am very tired and don't have any ideas...
This is the exact model I bought:
aliexpress(dot)com/item/Newest-Tianji-i9300-S3-MTK6577-Android-4-1-1-3G-Smartphone-512MB-4GB1-2GHz-4-6/709668717.html
Thanks for your help guys...
Please, someone help.
I experinced the same error message while trying to flash Alcatel OT 918..searched for solution but never got any.
At last i flashed a custom ROM(Andread 2.0) which worked after attaching a new IMEI coz at first phone couldn't connect to network due to IMEI issue.
But then my phone can't go back to the original ROM.
If u find help on the DRAM error please share.
enne92 said:
Hello, I've been the whole day reading about this problem, and didn't found anything, have been 8 hours trying to restore my phone, but unsucsefully.
I've tryed to install a Custom ROM on my Tinji 9300, but I selected to Flash the "PRELOADER" option, and now I'm unable to fix it...
The device connects to the PC in Recovery Mode pressing Volume UP & Volume Down & Home & Power Button and being the battery unplugged. After I plug the USB and the the Battery and recognizes the phone, it's not totally Bricked. The Screen doesn't light up and nothing happens, but it writes on FlashTool.
I attached the screen of the error, I don't know what to do anymore, I am very tired and don't have any ideas...
This is the exact model I bought:
aliexpress(dot)com/item/Newest-Tianji-i9300-S3-MTK6577-Android-4-1-1-3G-Smartphone-512MB-4GB1-2GHz-4-6/709668717.html
Thanks for your help guys...
Click to expand...
Click to collapse
u need this file!!!!!
s3d12-27.rar
Hi Guys.
So I downloaded the new A5 (2016) ROM for our samsung galaxy j700F and put it in the sd card.
When I boot to recovery, (shut down + volume up + power + home) it shows
Custom Binary is blocked by FRP Lock in red letters and the phone shuts down (does not boot into recovery)
I took out the battery and inserted it again. Again the same problem.
But when i Simply turn it off holding power button, it turns on (no bootloop)
Then my question is guys what seems to be the problem? How can it be solved because i am dying to try this new ROM.
Please Help
Thanks in advance (don't worry i will click the thanks button too :laugh: )
Thanks & Regards
AyushJ
Ayushj702 said:
Hi Guys.
So I downloaded the new A5 (2016) ROM for our samsung galaxy j700F and put it in the sd card.
When I boot to recovery, (shut down + volume up + power + home) it shows
Custom Binary is blocked by FRP Lock in red letters and the phone shuts down (does not boot into recovery)
I took out the battery and inserted it again. Again the same problem.
But when i Simply turn it off holding power button, it turns on (no bootloop)
Then my question is guys what seems to be the problem? How can it be solved because i am dying to try this new ROM.
Please Help
Thanks in advance (don't worry i will click the thanks button too :laugh: )
Thanks & Regards
AyushJ
Click to expand...
Click to collapse
Go in developer option and enable oem unlocking
Mandy $ingh said:
Go in developer option and enable oem unlocking
Click to expand...
Click to collapse
already enabled
reflash firmware bro..
Ayushj702 said:
Hi Guys.
So I downloaded the new A5 (2016) ROM for our samsung galaxy j700F and put it in the sd card.
When I boot to recovery, (shut down + volume up + power + home) it shows
Custom Binary is blocked by FRP Lock in red letters and the phone shuts down (does not boot into recovery)
I took out the battery and inserted it again. Again the same problem.
But when i Simply turn it off holding power button, it turns on (no bootloop)
Then my question is guys what seems to be the problem? How can it be solved because i am dying to try this new ROM.
Please Help
Thanks in advance (don't worry i will click the thanks button too :laugh: )
Thanks & Regards
AyushJ
Click to expand...
Click to collapse
Search from google, FRP unlock
Custom binary blocked by FRP
Ok, so I have the same problem. So I attempted to reflash the firmware, successfully, did not allow me to remove the FRP. Tried the reset method I have for odin, works for phones 2016 and older, not this phone, nor my other J3's. Any input would be greatly appreciated.
CAustin318 said:
Ok, so I have the same problem. So I attempted to reflash the firmware, successfully, did not allow me to remove the FRP. Tried the reset method I have for odin, works for phones 2016 and older, not this phone, nor my other J3's. Any input would be greatly appreciated.
Click to expand...
Click to collapse
I had the same problem ,my device didn't accept any stock or custom roms ,you will need to try many stock roms until you find a one that your device will work with, but it will not get the device totally stock ,This is what happened to my device J700H now I am searching for a way to get around the error " sw rev check fail device 3 binary 2"
I hope my words help you ......
Hello guys, right now i'm in big troubles with my FRD-L09C432. I tried to flash the rollback package (wich was working yesterday) but this time after the flashing process phone won't boot, i tried to enter recovery mode but i couldn't. Then i entered in fastboot mode and unlocked bootloader in order to reset the phone. I entered yes on the screen and the phone tried to reboot but now it is stuck on "your phone is unlocked..." and at the bottom: "your phone is booting now". But nothing happen and right now i cannot access recovery, or fastboot or even dload nothing works, i disconnected the battery and started the phone again but nothing... When i try to rebbot it in fastboot, recovery or dload mode it just vibrates twice and show the same screen with "your phone is booting now"
I'm really desperate i have never had a hopeless situation like that, i need your help, thanks a lot for any suggestion or idea that i could try.
:crying:
Up...
Rayan19997 said:
Hello guys, right now i'm in big troubles with my FRD-L09C432. I tried to flash the rollback package (wich was working yesterday) but this time after the flashing process phone won't boot, i tried to enter recovery mode but i couldn't. Then i entered in fastboot mode and unlocked bootloader in order to reset the phone. I entered yes on the screen and the phone tried to reboot but now it is stuck on "your phone is unlocked..." and at the bottom: "your phone is booting now". But nothing happen and right now i cannot access recovery, or fastboot or even dload nothing works, i disconnected the battery and started the phone again but nothing... When i try to rebbot it in fastboot, recovery or dload mode it just vibrates twice and show the same screen with "your phone is booting now"
I'm really desperate i have never had a hopeless situation like that, i need your help, thanks a lot for any suggestion or idea that i could try.
:crying:
Click to expand...
Click to collapse
Here is a link to my own experience of a similar situation.
https://forum.xda-developers.com/honor-8/help/reverting-to-stock-t3685909
And here is another link that might help.
https://forum.xda-developers.com/honor-8/help/honor-8-hard-brick-t3709598
I hope these will help.
srgrusso said:
Here is a link to my own experience of a similar situation.
https://forum.xda-developers.com/honor-8/help/reverting-to-stock-t3685909
And here is another link that might help.
https://forum.xda-developers.com/honor-8/help/honor-8-hard-brick-t3709598
I hope these will help.
Click to expand...
Click to collapse
Thanks dude i'll read that for sure
Unfortunately i have no access to fastboot that's why even DC Phoenix cannot do anything...
fastboot ... conect phone to PC. If the phone its on or off dosend matter.
After conecting to PC hold volume - and power buton (first volume- !) .... and wait a while ... it may reboot severel times. befor enter fastboot.
After enter fastboot try this https://forum.xda-developers.com/honor-8/help/honor-8-hard-bricket-how-to-restore-t3739551
I pray to access this damn fastboot mode dude but i've tried everything and i cannot get into it even when i disconnect/reconnect the battery
My opinion is that the phone tries to reboot in order to reset itself but smthg prevent it from rebooting correctly, a friend told me the boot is damaged/corrupted
Go to one of those high street repair shops. They fixed mine for 80 pounds.
The tech tried with his Huawei flashing box but he couldn't detect the phone...
Did your device got unbriked?
No i bought one with the screen broken and i swapped thé motherboards, but the other is still bricked
So, here it is in the title. People here are my last hope.
I wanted to do the TRWP bootloader change, but apparently i am way too stupid to do that, because my phone is rebooting incessently and the only things it show is:
Set Warranty Bit : vbmeta
Set Warranty Bit : Recovery
And i can't turn it off. Pressing volume up + volume down while pressing the power button does nothing. I searched on google relentlessly before coming here. Connecting my phone to my pc does nothing, nothing is recognized. I'm completely desperate. Is there any way to completely reset the phone without the recovery menu? I'm fairly sure there isn't but it doesn't hurt asking...
Thank you in advance for any suggestions.
Press both volume buttons only when connected to a PC and it should boot you to download mode. After the prompt, press VOL + to continue and then flash your stock ROM using Odin (download Odin from XDA, you can find it)
Thanks a whole lot, i finally have access to the download mode. Now i just have to find the original firmware
There are a few sites to download like sammobile and samfrew
I wanted to say: Thank you. Your instructions just saved my phone, and even tho i had a spare (my old phone) i'm glad i got it back.
icetoseeyoufr said:
I wanted to say: Thank you. Your instructions just saved my phone, and even tho i had a spare (my old phone) i'm glad i got it back.
Click to expand...
Click to collapse
Glad I could help.