Hi guys,
I have a Samsung S8 which a parent left for me and went back overseas the problem is that it's fingerprint locked.
What should i do ? Flash ?
Note: I think he has a google account on it too
Anyone , help please
Jazzi1903 said:
Hi guys,
I have a Samsung S8 which a parent left for me and went back overseas the problem is that it's fingerprint locked.
What should i do ? Flash ?
Note: I think he has a google account on it too
Anyone , help please
Click to expand...
Click to collapse
Have you tried doing a Hard Reset (Factory Reset)?
Go into recovery by holding the VOL UP + BIXBY BUTTON + POWER BUTTON and perform a factory reset from there
As for my phone, I can unlock screen by a PIN number as an alternative to fingerfoot.
Tiqqy said:
Have you tried doing a Hard Reset (Factory Reset)?
Go into recovery by holding the VOL UP + BIXBY BUTTON + POWER BUTTON and perform a factory reset from there
Click to expand...
Click to collapse
Don't do that or it will trigger frp lock if OEM unlocking wasn't enabled
Related
Hello
I apologize in advance for my English
I need advice if I could revive my HTC. If you want to get to the boot loader (camera + reset) to get there. The buttons seem to be ok but the system does not respond and get into the boot loader.
Even I can do hard reset.
When the system loads the WM so badly I calibrated the display so it is unlocked.
Do you know any trick how I could convince the system to get into boot loader and can load a new flash?
R 1.59.46.12
G 25.89.30.08W
D 3.15 Exxon
to get enter bootloader mode on your device, look at http://forum.xda-developers.com/showpost.php?p=2922211&postcount=2
Have same problem but with android installed. The camera button pressed wit soft reset dosen't work. Any other solution to enter in bootloader?
Thanks.
gushpitz said:
Have same problem but with android installed. The camera button pressed wit soft reset dosen't work. Any other solution to enter in bootloader?
Thanks.
Click to expand...
Click to collapse
to get bootloader mode simply by pressing the camera key, and then use the stylus, press and hold the RESET button at the bottom of the phone. Release both buttons once the bootloader screen appears
Hakim Rahman said:
to get bootloader mode simply by pressing the camera key, and then use the stylus, press and hold the RESET button at the bottom of the phone. Release both buttons once the bootloader screen appears
Click to expand...
Click to collapse
Thanks. I get that, but it's not working.
gushpitz said:
Thanks. I get that, but it's not working.
Click to expand...
Click to collapse
Problem solved. The photo camera button was not working properly. Now its working.
Hi All,
I have forgot the pass word of my XOLO SECURE app and when I try to reset my password from my google account , google redirects me to a page which says , OAuth1.0 protocol is now deprecated and no longer supported by google (Now OAuth2.0 is used ) , hence I am not able to reset my password .
I need to reset my password so that I can remove "xolo Secure" from "Device Administrators " , because it is not letting ,e use pattern lock and No Lock features . Currently I only have the priviledges to use PIN and PASSWOrd LOCK FEATURES . .
Can anybody help ??
[email protected] said:
Hi All,
I have forgot the pass word of my XOLO SECURE app and when I try to reset my password from my google account , google redirects me to a page which says , OAuth1.0 protocol is now deprecated and no longer supported by google (Now OAuth2.0 is used ) , hence I am not able to reset my password .
I need to reset my password so that I can remove "xolo Secure" from "Device Administrators " , because it is not letting ,e use pattern lock and No Lock features . Currently I only have the priviledges to use PIN and PASSWOrd LOCK FEATURES . .
Can anybody help ??
Click to expand...
Click to collapse
Factory resetting may solve your problem.
Not working
hitman-xda said:
Factory resetting may solve your problem.
Click to expand...
Click to collapse
I tried that , but I am not able to factory reset my phone , since it requires to disable XOLO SECURE first , which I cannot .
Is there any other way ???
[email protected] said:
I tried that , but I am not able to factory reset my phone , since it requires to disable XOLO SECURE first , which I cannot .
Is there any other way ???
Click to expand...
Click to collapse
Your phone must be having stock recovery. Try using that.
To enter into recovery follow below steps;
1.Power off your device and wait 4-5 seconds after lights go off.
2.Press and hold Power + Volume UP button together for a few seconds and then release the buttons as soon as you see the recovery screen.
- If the above method doesn't work,
Press and hold Power + Volume UP+ Volume DOWN button together.
In recovery, use Volume Up and Down keys to navigate between options and Power key to select an option.
You'll see factory reset option there, just do it and restart your phone.
Bingo! Your done
If you find this helpful, there's a thumbs up button (thanks button), just click it
Hi Guys.
So I downloaded the new A5 (2016) ROM for our samsung galaxy j700F and put it in the sd card.
When I boot to recovery, (shut down + volume up + power + home) it shows
Custom Binary is blocked by FRP Lock in red letters and the phone shuts down (does not boot into recovery)
I took out the battery and inserted it again. Again the same problem.
But when i Simply turn it off holding power button, it turns on (no bootloop)
Then my question is guys what seems to be the problem? How can it be solved because i am dying to try this new ROM.
Please Help
Thanks in advance (don't worry i will click the thanks button too :laugh: )
Thanks & Regards
AyushJ
Ayushj702 said:
Hi Guys.
So I downloaded the new A5 (2016) ROM for our samsung galaxy j700F and put it in the sd card.
When I boot to recovery, (shut down + volume up + power + home) it shows
Custom Binary is blocked by FRP Lock in red letters and the phone shuts down (does not boot into recovery)
I took out the battery and inserted it again. Again the same problem.
But when i Simply turn it off holding power button, it turns on (no bootloop)
Then my question is guys what seems to be the problem? How can it be solved because i am dying to try this new ROM.
Please Help
Thanks in advance (don't worry i will click the thanks button too :laugh: )
Thanks & Regards
AyushJ
Click to expand...
Click to collapse
Go in developer option and enable oem unlocking
Mandy $ingh said:
Go in developer option and enable oem unlocking
Click to expand...
Click to collapse
already enabled
reflash firmware bro..
Ayushj702 said:
Hi Guys.
So I downloaded the new A5 (2016) ROM for our samsung galaxy j700F and put it in the sd card.
When I boot to recovery, (shut down + volume up + power + home) it shows
Custom Binary is blocked by FRP Lock in red letters and the phone shuts down (does not boot into recovery)
I took out the battery and inserted it again. Again the same problem.
But when i Simply turn it off holding power button, it turns on (no bootloop)
Then my question is guys what seems to be the problem? How can it be solved because i am dying to try this new ROM.
Please Help
Thanks in advance (don't worry i will click the thanks button too :laugh: )
Thanks & Regards
AyushJ
Click to expand...
Click to collapse
Search from google, FRP unlock
Custom binary blocked by FRP
Ok, so I have the same problem. So I attempted to reflash the firmware, successfully, did not allow me to remove the FRP. Tried the reset method I have for odin, works for phones 2016 and older, not this phone, nor my other J3's. Any input would be greatly appreciated.
CAustin318 said:
Ok, so I have the same problem. So I attempted to reflash the firmware, successfully, did not allow me to remove the FRP. Tried the reset method I have for odin, works for phones 2016 and older, not this phone, nor my other J3's. Any input would be greatly appreciated.
Click to expand...
Click to collapse
I had the same problem ,my device didn't accept any stock or custom roms ,you will need to try many stock roms until you find a one that your device will work with, but it will not get the device totally stock ,This is what happened to my device J700H now I am searching for a way to get around the error " sw rev check fail device 3 binary 2"
I hope my words help you ......
Hi dear I have nokia 3 and I forgotten passaword I could'nt find a tools for reset or factory reset pleas help me
sabahsaeedi said:
Hi dear I have nokia 3 and I forgotten passaword I could'nt find a tools for reset or factory reset pleas help me
Click to expand...
Click to collapse
1. Switch off your phone
2. Hold Vol+ and Power, keep hold until 10secs disappear
3. Wipe cache and format data
4. Restart
Same thing, but the screen is dark and won't come up. So, I can't navigate to power off, or unlock as the SIM is still locked - very new phone. Hard key for power off, anyone? Want to try hard reset.
Hello guys. I am having an issue with a Meizu E3 phone. I have received it from a friend a few days before he left the country. It has an issue that after it was booting, it was ending up at a black screen, although the light was coming to the panel. The only operation that I could've to perform was holding the power button and the power off and restart icons would show up. After a few attempts, I was able to update it and everything was back. Now my friend is out of the country so I asked him for the pin for the phone, but he doesn't remember it as he used the fingerprint all the time. And I cannot find a way to factory reset it. I cannot do the volume up/down + power combination because I don't have a wipe option. The only option available is to clear user data BUT it requires the pin ... I can get the phone in fastboot tho, but I couldn't reset from there either. Trying to reset the pin through google account is not going to work because I can't connect it to the internet (as you need the pin to turn the wifi on or the mobile data).
Do you got any suggestions?
UP!
cosminroger said:
Hello guys. I am having an issue with a Meizu E3 phone. I have received it from a friend a few days before he left the country. It has an issue that after it was booting, it was ending up at a black screen, although the light was coming to the panel. The only operation that I could've to perform was holding the power button and the power off and restart icons would show up. After a few attempts, I was able to update it and everything was back. Now my friend is out of the country so I asked him for the pin for the phone, but he doesn't remember it as he used the fingerprint all the time. And I cannot find a way to factory reset it. I cannot do the volume up/down + power combination because I don't have a wipe option. The only option available is to clear user data BUT it requires the pin ... I can get the phone in fastboot tho, but I couldn't reset from there either. Trying to reset the pin through google account is not going to work because I can't connect it to the internet (as you need the pin to turn the wifi on or the mobile data).
Do you got any suggestions?
Click to expand...
Click to collapse
You've tried the "fastboot format userdata" command but it isn't working?
If the stock firmware is available for the device, try flashing the stock firmware.
Sent from my LGL84VL using Tapatalk
Droidriven said:
You've tried the "fastboot format userdata" command but it isn't working?
If the stock firmware is available for the device, try flashing the stock firmware.
Sent from my LGL84VL using Tapatalk
Click to expand...
Click to collapse
Thanks for the reply. Yes I have tried to format/erase userdata and everytime it says "FAILED (remote: Erase is not allowed in Secure State)"
Could you tell me how can I flash the stock firmware on it? Because the only option I have for it in the bootloader is to upgrade the firmware.
I have a package flashing with Qualcomm 9008 mode,link is here. https://mega.nz/#!4YdmyIwJ!QpximadRwxdajGZPj-y91iozBvqNCZloL8FlEQPizIc
btw,in the first time, I flashed it in a wrong way, and now it lost it's SN, how can I restore it ?
Could anybody unlock bootloader with this package?