Hello
I apologize in advance for my English
I need advice if I could revive my HTC. If you want to get to the boot loader (camera + reset) to get there. The buttons seem to be ok but the system does not respond and get into the boot loader.
Even I can do hard reset.
When the system loads the WM so badly I calibrated the display so it is unlocked.
Do you know any trick how I could convince the system to get into boot loader and can load a new flash?
R 1.59.46.12
G 25.89.30.08W
D 3.15 Exxon
to get enter bootloader mode on your device, look at http://forum.xda-developers.com/showpost.php?p=2922211&postcount=2
Have same problem but with android installed. The camera button pressed wit soft reset dosen't work. Any other solution to enter in bootloader?
Thanks.
gushpitz said:
Have same problem but with android installed. The camera button pressed wit soft reset dosen't work. Any other solution to enter in bootloader?
Thanks.
Click to expand...
Click to collapse
to get bootloader mode simply by pressing the camera key, and then use the stylus, press and hold the RESET button at the bottom of the phone. Release both buttons once the bootloader screen appears
Hakim Rahman said:
to get bootloader mode simply by pressing the camera key, and then use the stylus, press and hold the RESET button at the bottom of the phone. Release both buttons once the bootloader screen appears
Click to expand...
Click to collapse
Thanks. I get that, but it's not working.
gushpitz said:
Thanks. I get that, but it's not working.
Click to expand...
Click to collapse
Problem solved. The photo camera button was not working properly. Now its working.
Related
Hi guys. I have such a problem - when i press reset my S100 gos to bootloader mode. After I take the battery off and then put it in i see the windows setup screen, then when programs from the ExtROM are setup and the device reboots it go to Bootloader mode again. what i have to do?
just push soft reset without power button while before extended rom begin loading......... advice from Moscow
When pressing reset device goes to bootloader mode
It shouldn't go to bootloader. The documented procedure is that after aligning the screen etc, click ok, and then reset the PDA as normal before it finishes booting up, by poking your stick in it's hole. Don't press any of it's buttons. Just the hole.
V
Maybe you have a halfway finished ROM upload on your Magician? Try running a full ROM install, that should fix it.
vijay555 said:
It shouldn't go to bootloader. The documented procedure is that after aligning the screen etc, click ok, and then reset the PDA as normal before it finishes booting up, by poking your stick in it's hole. Don't press any of it's buttons. Just the hole.
Click to expand...
Click to collapse
But it does go to bootloader. In any way if i press reset button (that is in the hole) it goes to bootloader.
HBK said:
Try running a full ROM install, that should fix it.
Click to expand...
Click to collapse
What do you mean full ROM?
I tried to flash it just as usual, but when it goes to bootloader mode windows cant recognize the device so the flasher tells "connection error".
i just tried to reset my phone so I can upgrade to Mango officially, but I forgot my pin...how can i hard reset my phone without being able to log into it
ok now im stuck in download mode....this suucks, can i pull out the battery to get out of it?
ok im out of download mode, one thing fixed, so how can I reset the phone without being able to get in it
mmian said:
ok im out of download mode, one thing fixed, so how can I reset the phone without being able to get in it
Click to expand...
Click to collapse
when you do a cold boot (hard reset) you have to
1. Power off the phone. Remove and re-insert the battery to make sure.
2. Press and hold the middle of the Volume button (so that both + and - are pushed down) and the Camera button. While holding these button also press the Power button.
3. Wait until the screen shows "Cold Boot" then release the Power button only.
4. Keep holding the middle of Volume and Camera buttons pressed until the Welcome screen appears.
This may require some fingering to get it right. If you don't get it right you may accidently enter the emergency download mode.
If this doesn't work you can use the download mode to deploy a NoDo rom that might be available for you phone.
Hi everyone,
I'm trying to flash a custom ROM, and every method requires me to unlock the bootloader via HTCdev, but I have two problems:
1) I can't boot into bootloader. When I hold power + volume-down, the phone boots into safe mode (I don't think that's normal right?). I took care of this by using adb and (adb reboot bootloader) to get into the bootloader.
2) When I'm in the bootloader, the power button (to make any selections) doesn't work. So I'm always stuck at the last screen that says "Unlock bootloader?" and I just have to select "yes" with the power button, but I simply can't!
Does anyone know how I can get the bootloader to work normally, or get my power button to work when I'm in fastboot?
Thanks in advance!
Did you get around this? I keep having the same issue!
todavchich said:
Did you get around this? I keep having the same issue!
Click to expand...
Click to collapse
Read the screen on your phone , you got to use volume up or volume down button to select yes or no , i think volume up is for yes and than press power
todavchich said:
Did you get around this? I keep having the same issue!
Click to expand...
Click to collapse
Maybe certain fastboot commands may help a little, if the power button is damaged. (Maybe take off the back cover and see if you can then push it down properly..)
Mile_zdr said:
Read the screen on your phone , you got to use volume up or volume down button to select yes or no , i think volume up is for yes and than press power
Click to expand...
Click to collapse
And not exactly.
If I recall correctly,
vol down means moving down on the list
vol up means moving up on the list
& power button is 'select'
Nicx59 said:
Maybe certain fastboot commands may help a little, if the power button is damaged. (Maybe take off the back cover and see if you can then push it down properly..)
And not exactly.
If I recall correctly,
vol down means moving down on the list
vol up means moving up on the list
& power button is 'select'
Click to expand...
Click to collapse
i know , but we are talking about HTCdev see here http://i.imgur.com/wexUA3G.jpg
Mile_zdr said:
i know , but we are talking about HTCdev see here http://i.imgur.com/wexUA3G.jpg
Click to expand...
Click to collapse
with power button you are selecting
-deleted-
Pleas help - same problem
Mile_zdr said:
-deleted-
Click to expand...
Click to collapse
hi, was you able to fix the problem since i have the exact same problem and i am not able to accept to unlock the bootloader...
Berkaypkk said:
hi, was you able to fix the problem since i have the exact same problem and i am not able to accept to unlock the bootloader...
Click to expand...
Click to collapse
Did you have this screen on your phone?
Mile_zdr said:
Did you have this screen on your phone?
Click to expand...
Click to collapse
Yep, exactly where i am stuck at, i can use the volume buttons down to move up and down but i cant use the power button to select ;(, i just dont get it, why does it work on normal use but not in bootloader, weird...
Berkaypkk said:
Yep, exactly where i am stuck at, i can use the volume buttons down to move up and down but i cant use the power button to select ;(, i just dont get it, why does it work on normal use but not in bootloader, weird...
Click to expand...
Click to collapse
When you are in that screen that i showed you, what happens when you press Volume up , does it select on the scree YES unlock the bootloader (may avoid you warranty) ? If yes it select's than press power button to continue... and you will unlock you bootloader if not i don't have anything else on my mind :/
Mile_zdr said:
When you are in that screen that i showed you, what happens when you press Volume up , does it select on the scree YES unlock the bootloader (may avoid you warranty) ? If yes it select's than press power button to continue... and you will unlock you bootloader if not i don't have anything else on my mind :/
Click to expand...
Click to collapse
Volume up works but the power button doesnt
I'm also stuck in this screen for the past week, I got this phone for free, but now I want to root it but I'm stuck in this screen. I've tried several tools like kgs1992utility, hasoon2000's utility, even the windroid tool for htc sensation, but somehow I simply cannot get passed this screen. Is there any adb commands to replace the power button to select?
only the volume down button works, but it works in the opposite way(ex volume down actually takes you up not down) -__-
cant finish power button will not select yes
I am having the exact same problem the power button suddenly will not work on yes but does on no WIERD and very FRUSTRATING
Hotrodanimal said:
I am having the exact same problem the power button suddenly will not work on yes but does on no WIERD and very FRUSTRATING
Click to expand...
Click to collapse
So I had the exact same issue. I pressed the power button and volume down together and the phone rebooted back into the bootloader, this time it says *** UNLOCKED*** at the top of the screen.
SF
Hello , i tried rooting my S7 exynos and everything worked smoothly until i tried to get into TWRP mode and pressed volume up and power button. It woudnt like me swipe to unlock the twrp interface, so i pressed power button and now there's a lock on my phone and i cant do, press anything. My phone is stuck in this Mode i cant even turn it off, its just permanently stuck on this screen... PLS HELP!!
DanR22 said:
Hello , i tried rooting my S7 exynos and everything worked smoothly until i tried to get into TWRP mode and pressed volume up and power button. It woudnt like me swipe to unlock the twrp interface, so i pressed power button and now there's a lock on my phone and i cant do, press anything. My phone is stuck in this Mode i cant even turn it off, its just permanently stuck on this screen... PLS HELP!!
Click to expand...
Click to collapse
Try to hold all buttons of your phone down for about 10 seconds and then your phone should restart itself.
Force your device to reboot by holding volume down, home button and power button at the same time. Hold the buttons down until the device reboots.
From then you can attempt to flash stock firmware via Odin and then making sure that you have enabled OEM unlock in developer options and that you have the correct TWRP for your device (Check MD5, to make sure it isn't corrupted)
Didn't help!
Battlehero said:
Force your device to reboot by holding volume down, home button and power button at the same time. Hold the buttons down until the device reboots.
From then you can attempt to flash stock firmware via Odin and then making sure that you have enabled OEM unlock in developer options and that you have the correct TWRP for your device (Check MD5, to make sure it isn't corrupted)
Click to expand...
Click to collapse
Rebooting didn't help at all. Again at same page with no responses on touch inputs.
Java Baba said:
Rebooting didn't help at all. Again at same page with no responses on touch inputs.
Click to expand...
Click to collapse
Hey! How did you manage to solve the problem? I'm having the same issue.
Can't select anything with the power button, can't force reset it with holding the power button, and I don't know what to do.
you'd better not lock the bootloader. If your device is not totally stock this will brick your device. EDL is the only way to restore then.
Cyanide_zh said:
you'd better not lock the bootloader. If your device is not totally stock this will brick your device. EDL is the only way to restore then.
Click to expand...
Click to collapse
I just installed the latest RUI before this happened, also what is EDL?
Ok, it somehow solved it's self after a few hours, it stopped moving and allowed me to select, lol.
riftrn said:
Ok, it somehow solved it's self after a few hours, it stopped moving and allowed me to select, lol.
Click to expand...
Click to collapse
you can force shutdown by pressing vol up + power button for a while until screen goes black or just keep pressing if you want to reboot