Question Device stuck like this after trying to lock bootloader, any advice would be appreciated. - Realme GT Neo 2

Can't select anything with the power button, can't force reset it with holding the power button, and I don't know what to do.

you'd better not lock the bootloader. If your device is not totally stock this will brick your device. EDL is the only way to restore then.

Cyanide_zh said:
you'd better not lock the bootloader. If your device is not totally stock this will brick your device. EDL is the only way to restore then.
Click to expand...
Click to collapse
I just installed the latest RUI before this happened, also what is EDL?

Ok, it somehow solved it's self after a few hours, it stopped moving and allowed me to select, lol.

riftrn said:
Ok, it somehow solved it's self after a few hours, it stopped moving and allowed me to select, lol.
Click to expand...
Click to collapse
you can force shutdown by pressing vol up + power button for a while until screen goes black or just keep pressing if you want to reboot

Related

[Q] Can't use power button to unlock phone via HTCDev

Hi everyone,
I'm trying to flash a custom ROM, and every method requires me to unlock the bootloader via HTCdev, but I have two problems:
1) I can't boot into bootloader. When I hold power + volume-down, the phone boots into safe mode (I don't think that's normal right?). I took care of this by using adb and (adb reboot bootloader) to get into the bootloader.
2) When I'm in the bootloader, the power button (to make any selections) doesn't work. So I'm always stuck at the last screen that says "Unlock bootloader?" and I just have to select "yes" with the power button, but I simply can't!
Does anyone know how I can get the bootloader to work normally, or get my power button to work when I'm in fastboot?
Thanks in advance!
Did you get around this? I keep having the same issue!
todavchich said:
Did you get around this? I keep having the same issue!
Click to expand...
Click to collapse
Read the screen on your phone , you got to use volume up or volume down button to select yes or no , i think volume up is for yes and than press power
todavchich said:
Did you get around this? I keep having the same issue!
Click to expand...
Click to collapse
Maybe certain fastboot commands may help a little, if the power button is damaged. (Maybe take off the back cover and see if you can then push it down properly..)
Mile_zdr said:
Read the screen on your phone , you got to use volume up or volume down button to select yes or no , i think volume up is for yes and than press power
Click to expand...
Click to collapse
And not exactly.
If I recall correctly,
vol down means moving down on the list
vol up means moving up on the list
& power button is 'select'
Nicx59 said:
Maybe certain fastboot commands may help a little, if the power button is damaged. (Maybe take off the back cover and see if you can then push it down properly..)
And not exactly.
If I recall correctly,
vol down means moving down on the list
vol up means moving up on the list
& power button is 'select'
Click to expand...
Click to collapse
i know , but we are talking about HTCdev see here http://i.imgur.com/wexUA3G.jpg
Mile_zdr said:
i know , but we are talking about HTCdev see here http://i.imgur.com/wexUA3G.jpg
Click to expand...
Click to collapse
with power button you are selecting
-deleted-
Pleas help - same problem
Mile_zdr said:
-deleted-
Click to expand...
Click to collapse
hi, was you able to fix the problem since i have the exact same problem and i am not able to accept to unlock the bootloader...
Berkaypkk said:
hi, was you able to fix the problem since i have the exact same problem and i am not able to accept to unlock the bootloader...
Click to expand...
Click to collapse
Did you have this screen on your phone?
Mile_zdr said:
Did you have this screen on your phone?
Click to expand...
Click to collapse
Yep, exactly where i am stuck at, i can use the volume buttons down to move up and down but i cant use the power button to select ;(, i just dont get it, why does it work on normal use but not in bootloader, weird...
Berkaypkk said:
Yep, exactly where i am stuck at, i can use the volume buttons down to move up and down but i cant use the power button to select ;(, i just dont get it, why does it work on normal use but not in bootloader, weird...
Click to expand...
Click to collapse
When you are in that screen that i showed you, what happens when you press Volume up , does it select on the scree YES unlock the bootloader (may avoid you warranty) ? If yes it select's than press power button to continue... and you will unlock you bootloader if not i don't have anything else on my mind :/
Mile_zdr said:
When you are in that screen that i showed you, what happens when you press Volume up , does it select on the scree YES unlock the bootloader (may avoid you warranty) ? If yes it select's than press power button to continue... and you will unlock you bootloader if not i don't have anything else on my mind :/
Click to expand...
Click to collapse
Volume up works but the power button doesnt
I'm also stuck in this screen for the past week, I got this phone for free, but now I want to root it but I'm stuck in this screen. I've tried several tools like kgs1992utility, hasoon2000's utility, even the windroid tool for htc sensation, but somehow I simply cannot get passed this screen. Is there any adb commands to replace the power button to select?
only the volume down button works, but it works in the opposite way(ex volume down actually takes you up not down) -__-
cant finish power button will not select yes
I am having the exact same problem the power button suddenly will not work on yes but does on no WIERD and very FRUSTRATING
Hotrodanimal said:
I am having the exact same problem the power button suddenly will not work on yes but does on no WIERD and very FRUSTRATING
Click to expand...
Click to collapse
So I had the exact same issue. I pressed the power button and volume down together and the phone rebooted back into the bootloader, this time it says *** UNLOCKED*** at the top of the screen.
SF

[Q] Hard brick?

Hey Guys,
so ive been messing around with this little phone and think i might have managed a hard brick. Any thoughts or advice would be appreciated.
was attempting to relock the bootloader and flashing my local 4.4.2 rom and on the command prompt when i reached flash system.img parsechunk lines, they failed. as it said permission denied.
Tried to continue with no luck. Restarted my phone and now cant get into recovery and no boot, the only screen i see is the white warning bootloader locked screen, get a vibrate and then it turns off again. Any ways to flash without Recovery or Fastboot or am i completely out of luck?
Sorry im new to motorolas, had no problems messing around with my old SGS2
Thanks in advance everybody.
did you try this ?
http://forum.xda-developers.com/showthread.php?t=2542219
the only problem is cant get the phone into fastboot mode. Thanks for the input though!
mackb44 said:
the only problem is cant get the phone into fastboot mode. Thanks for the input though!
Click to expand...
Click to collapse
I've been in a few situations where I thought I had 'bricked' my phone. One way that worked (sometimes) was to long press the POWER button for a very long time(minutes), then release and (sometimes) it would reboot.
The usual way to the fastboot menu is - power off (which yours probably is), then hold vol. down and press power button for 5/10 seconds and release both.
Good luck!
jamsh said:
I've been in a few situations where I thought I had 'bricked' my phone. One way that worked (sometimes) was to long press the POWER button for a very long time(minutes), then release and (sometimes) it would reboot.
The usual way to the fastboot menu is - power off (which yours probably is), then hold vol. down and press power button for 5/10 seconds and release both.
Good luck!
Click to expand...
Click to collapse
Yea tried both options, no luck!
The only screen i can get now is the bootloader unlocked screen or the white charging screen when plugged in. After that the screen will stay on but is completely black.
Success I can get into fastboot now!!!! not sure why i could not before
mackb44 said:
Success I can get into fastboot now!!!! not sure why i could not before
Click to expand...
Click to collapse
yes i had something similar,bootlocker warning and then the screen going dark. i just ended up using fastboot and flashing a stock rom and went from there.
glad your panic is over .
quizmaniac said:
yes i had something similar,bootlocker warning and then the screen going dark. i just ended up using fastboot and flashing a stock rom and went from there.
glad your panic is over .
Click to expand...
Click to collapse
Yea thanks buddy!
just have to wait for it to charge up before it will let me flash using adb, oddly its only showing that it is charging while plugged into usb and not the wall socket

[Q] Google Logo BootLoop

Hello,
I have a black nexus 5, recently updated to 4.4.3. And I've got those random reboots. One of these the phone don't come out of it. Stays off. When I try to turn on It only shows the Google Logo, vibrates and then turns off, sometimes it stays bootlooping for a while.
I've tried to get to the recovery menu, and I couldn't. I've send it to the LG here in Brazil, and they can't fix it.
Anyone knows any alternatives?
Have you tried to reflash the stock images? http://forum.xda-developers.com/google-nexus-5/general/tutorial-how-to-flash-factory-image-t2513701
Why you could not enter the recovery menu? What happend?
bitdomo said:
Have you tried to reflash the stock images? http://forum.xda-developers.com/google-nexus-5/general/tutorial-how-to-flash-factory-image-t2513701
Why you could not enter the recovery menu? What happend?
Click to expand...
Click to collapse
It doesn't respond to any commands I give, I can be pressing the buttons, but it stays bootlooping.
provetti said:
It doesn't respond to any commands I give, I can be pressing the buttons, but it stays bootlooping.
Click to expand...
Click to collapse
Remove usb cable and press power buttom for 30secs then press volume_down and power buttom. You have to be in fastboot mode. Report me back
bitdomo said:
Remove usb cable and press power buttom for 30secs then press volume_down and power buttom. You have to be in fastboot mode. Report me back
Click to expand...
Click to collapse
tomorrow night I'll try this. I have to get my phone back.
I'll come back
bitdomo said:
Remove usb cable and press power buttom for 30secs then press volume_down and power buttom. You have to be in fastboot mode. Report me back
Click to expand...
Click to collapse
I have just tried this, and When it goes t the recovery interface, it shuts down then bootlooping again. I`ve read some posts and they say that it is a power button problem.
provetti said:
I have just tried this, and When it goes t the recovery interface, it shuts down then bootlooping again. I`ve read some posts and they say that it is a power button problem.
Click to expand...
Click to collapse
Kindly read this post.
http://forum.xda-developers.com/goo...5-boot-loop-google-logo-t2797162/post53766607
and don't be too harsh to your device. If u din't get a proper boot, give more tries as it will some how boots properly.
Let's hope for the best.

hard bricked my MT-TL10

Hi there,
Kindly help... I successfully installed B512 on my TL10 using force upgrade method, afterwhich I changed recovery to TWRP 3.0.2 using mobopx v2.2, which was also successful. And then I installed SuperSU 2.46 via TWRP, then cleared cache/dalvik. But upon rebooting system, I get a blank screen, even after waiting for more than 15 minutes.
And so I tried going to TWRP (Vol+ and power), which was successful, in order to boot to bootloader, with the intention of loading back the stock bootloader via adb, so that I can force install B512 from my microSD card again. It seemed to install fine...
However, at this point, I cannot reboot to bootloader (Vol- and power) anymore, I only get blank screen. Trying recovery (Vol+ and power) doesn't work either. Rebooting normally gives me the same. I cannot by any means connect via adb now.
Is there any way to unbrick my phone at this point?
Thanks so much. Cheers.
Works entrance for the recovery (Vol+ and Vol- and Power)?
rakrakrak said:
Works entrance for the recovery (Vol+ and Vol- and Power)?
Click to expand...
Click to collapse
No bro...
eusagc said:
However, at this point, I cannot reboot to bootloader (Vol- and power) anymore, I only get blank screen. Trying recovery (Vol+ and power) doesn't work either. Rebooting normally gives me the same. I cannot by any means connect via adb now.
Click to expand...
Click to collapse
What happens when you do a Vol up + power?
CloudCompute said:
What happens when you do a Vol up + power?[/QU
The phone "doesn't want to turn off" bro. It has fully discharged, but as soon as I plug the charger in, it immediately powers up. When it does, now it shows the Huawei logo. But it's stuck there, and if I press the power button for a few secs, it will power down, but immediately power up again...
Click to expand...
Click to collapse
eusagc said:
CloudCompute said:
What happens when you do a Vol up + power?[/QU
The phone "doesn't want to turn off" bro. It has fully discharged, but as soon as I plug the charger in, it immediately powers up. When it does, now it shows the Huawei logo. But it's stuck there, and if I press the power button for a few secs, it will power down, but immediately power up again...
Click to expand...
Click to collapse
Let it get fully charged first. Then remove the charger and keep the Vol up and power button pressed for ~10 secs or more, and see where it takes you.
Click to expand...
Click to collapse
CloudCompute said:
eusagc said:
Let it get fully charged first. Then remove the charger and keep the Vol up and power button pressed for ~10 secs or more, and see where it takes you.
Click to expand...
Click to collapse
Ok dude, will do. Thanks!
Click to expand...
Click to collapse
CloudCompute said:
eusagc said:
Let it get fully charged first. Then remove the charger and keep the Vol up and power button pressed for ~10 secs or more, and see where it takes you.
Click to expand...
Click to collapse
Done bro. Although I must say, I'm kinda back like yesterday when the phone is just helplessly discharging until it drops dead. Pressing vol+ and power restarts the phone, but I'm still stuck at the logo...
Click to expand...
Click to collapse
CloudCompute said:
Done bro. Although I must say, I'm kinda back like yesterday when the phone is just helplessly discharging until it drops dead. Pressing vol+ and power restarts the phone, but I'm still stuck at the logo...
Click to expand...
Click to collapse
You seem to be in a sticky situation bro. Your recovery seems to be broken because in stock recovery Vol up + power should ideally take you to recovery and not restart. If you could somehow boot into fastboot mode then it could open up some options to bring your phone to life.
With no way to connect to the phone the only options left are the hardware buttons. I am sure you'd have tried them already, but just in case you have not, try the other 2 key combinations also, Vol down + power and Vol up + Volume down + power, for ~10 secs, to check if any of these either forces a factory reset or boots the phone into fastboot mode.
eusagc said:
Hi there,
Kindly help... I successfully installed B512 on my TL10 using force upgrade method, afterwhich I changed recovery to TWRP 3.0.2 using mobopx v2.2, which was also successful. And then I installed SuperSU 2.46 via TWRP, then cleared cache/dalvik. But upon rebooting system, I get a blank screen, even after waiting for more than 15 minutes.
And so I tried going to TWRP (Vol+ and power), which was successful, in order to boot to bootloader, with the intention of loading back the stock bootloader via adb, so that I can force install B512 from my microSD card again. It seemed to install fine...
However, at this point, I cannot reboot to bootloader (Vol- and power) anymore, I only get blank screen. Trying recovery (Vol+ and power) doesn't work either. Rebooting normally gives me the same. I cannot by any means connect via adb now.
Is there any way to unbrick my phone at this point?
Thanks so much. Cheers.
Click to expand...
Click to collapse
Go back to stock recovery reflash stock rom make sure you have a unlocked bootloader......all remember that Google is your friend.....
CloudCompute said:
You seem to be in a sticky situation bro. Your recovery seems to be broken because in stock recovery Vol up + power should ideally take you to recovery and not restart. If you could somehow boot into fastboot mode then it could open up some options to bring your phone to life.
Click to expand...
Click to collapse
That's correct bro. Although it appears from adb that I was able to install the stock recovery, I cannot access it with Vol+ and power.
CloudCompute said:
With no way to connect to the phone the only options left are the hardware buttons. I am sure you'd have tried them already, but just in case you have not, try the other 2 key combinations also, Vol down + power and Vol up + Volume down + power, for ~10 secs, to check if any of these either forces a factory reset or boots the phone into fastboot mode.
Click to expand...
Click to collapse
Yes, I did. And I can't even boot to bootloader after all that... The phone only seems to charge, but is stuck at the logo.
I'm ready to send this to Huawei's service center. Is there anything more I can do at this point before I do that? Thanks so much.
stinka318 said:
Go back to stock recovery reflash stock rom make sure you have a unlocked bootloader......all remember that Google is your friend.....
Click to expand...
Click to collapse
Thanks bro, but that's what I did, or at least was planning to do. After rooting B512 via TWRP, the phone got stuck at the logo. And so I tried to install stock recovery, which it did, in order to reflash the stock ROM. But at this point I'm still stuck at the logo, and I can't access recovery and BL anymore. The BL is unlocked right from the start...
eusagc said:
Thanks bro, but that's what I did, or at least was planning to do. After rooting B512 via TWRP, the phone got stuck at the logo. And so I tried to install stock recovery, which it did, in order to reflash the stock ROM. But at this point I'm still stuck at the logo, and I can't access recovery and BL anymore. The BL is unlocked right from the start...
Click to expand...
Click to collapse
Did you try volume down and then plug USB in on computer then command prompt fast boot reboot it may work.
eusagc said:
I'm ready to send this to Huawei's service center. Is there anything more I can do at this point before I do that? Thanks so much.
Click to expand...
Click to collapse
Go ahead, send it to Huawei service centre. They'll have ways to reach the internal memory after opening up the device.
stinka318 said:
Did you try volume down and then plug USB in on computer then command prompt fast boot reboot it may work.
Click to expand...
Click to collapse
Thank you for this suggestion brother. I tried exactly as you described, however, the phone looks badly discharged, and while the screen was blinking/showing the red battery icon, it doesn't seem to want to charge. I waited around 5 minutes, but nothing seems to progress from here.
And so now, I moved the USB cable to a proper charger, and now it seems to be charging, with the LED light a steady red, and the screen the normal red circle with "0%" inside. It seems to be charging at the moment, although I really have to wait until it shows "1%" until I can surely say so.
One thing that's different now is that the phone hasn't turned on (by itself) yet. And at least this looks promising.
I'll let you know what happens in a while... Thank you!
eusagc said:
Thank you for this suggestion brother. I tried exactly as you described, however, the phone looks badly discharged, and while the screen was blinking/showing the red battery icon, it doesn't seem to want to charge. I waited around 5 minutes, but nothing seems to progress from here.
And so now, I moved the USB cable to a proper charger, and now it seems to be charging, with the LED light a steady red, and the screen the normal red circle with "0%" inside. It seems to be charging at the moment, although I really have to wait until it shows "1%" until I can surely say so.
One thing that's different now is that the phone hasn't turned on (by itself) yet. And at least this looks promising.
I'll let you know what happens in a while... Thank you!
Click to expand...
Click to collapse
Charging's at 4% now... And the phone hasn't turned on so far... Looks promising...
eusagc said:
Charging's at 4% now... And the phone hasn't turned on so far... Looks promising...
Click to expand...
Click to collapse
All well now?
CloudCompute said:
All well now?
Click to expand...
Click to collapse
I was out of town for the past few weeks and didn't have time to do this. I'm back now and plan to work on this tonight. Thank you bro, I'll let you know how it goes...

Nexus 5 D820 Bricked

Hi all,
My Nexus 5was running stock Android M till last week and I wanted Android N. So I rooted my phone installed TWRp and loaded android N by @santhosh. Everything went well but at times some apps kept crashing including TWRP. So I decided to to do a clean wipe. I did a clean wipe from recovery but after that my phone is not booting up. It's stuck on bootloop.
I am not able to boot into recovery mode also is there any way to save my phone?
Pardon my English.
Are you able to access the bootloader (hold power button + vol down until the phone boots)
I suggest using NRT to flash a stock ROM.
https://forum.xda-developers.com/go...olkit-wugs-nexus-root-toolkit-v1-8-3-t2517778
ErXBout said:
Are you able to access the bootloader (hold power button + vol down until the phone boots)
Click to expand...
Click to collapse
No i can't. It will go to bootloader When I press volume down + power but only for a second or so.. After that it'll bootloop.
​
audit13 said:
I suggest using NRT to flash a stock ROM.
https://forum.xda-developers.com/go...olkit-wugs-nexus-root-toolkit-v1-8-3-t2517778
Click to expand...
Click to collapse
But my phone is not detecting when I Connect on my laptop
Cool Dad said:
No i can't. It will go to bootloader When I press volume down + power but only for a second or so.. After that it'll bootloop.
Click to expand...
Click to collapse
Sounds like a dead power button?
Not sure, never had this problem.
But that is a common issue
The fact that the phone is not detected by the phone makes it difficult to re-flash a stock ROM.
If it is a power button issue, I recommend removing the motherboard, cleaning around the power button with pure isopropyl alcohol., quickly press and release the power button using a bit more pressure that usual, replace the motherboard, and try again.

Categories

Resources