Database Info

[I9003] DEODEXING Method If Every Other Method Fails (Without Busybox)

This Method Is The method Used By Me For deodexing Gingerbread XXKPE .I used This Method Because I was Not able to install BusyBox (ie The cp command didn't Work.so I was not able to copy the deodexed files to phone .So That the phone did not boot,stuck at the booting time).
Use This Method If Every Method For Deodexing Fails.
Steps
1.) flash to new XXKPE gingerbread Rom
2.) Root Your Phone
3.) download xUltimate-v2.2.8 xUltimate-v2.2.8
Note: You can use the already deodexed files by downloading this link Download Deodexed System Files [COMPLETE] then Goto step 11
4.) Unzip xUltimate v2.2, and launch "Main.exe"
5.) If everything goes well xUlt should recognize the phone and make a connection. You now should see a list of options.
6.) Run option 1. After option 1 is done, run option 2.
7.) Now these well take a while. Run option 3.
8.) IMPORTANT: After you have run option 3
9.) Now run option 4, and wait.
10.) Exit xUltimate, and put the phone in USB debugging Mode
11.) Download QtADB_0.8.0_windows_with_libs.zip
QtADB_0.8.0_windows_with_libs.zip
12.) Open It QtADB (left side - Browse to the xultimate folder, Right Side System folder)
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
13.) copy all the in the done_app folder to the app folder in the phone side
14.) type odex in the filter textbox (phone side) and you will see all the odex files.select all and delete them
15.) copy all the files in done_frame to framework folder in the phone side
16.) type odex in the filter textbox (phone side) and you will see all the odex files.select all and delete them
17.) Reboot
Note 1: Rebooting Will take some time .its due to the new caching of files
Note 2: If Copying Get Stuck At somewere ,NO PROBLEM just Recopy The files Until all files are copied

Forget deodoxed process, and thank you brother for This explorer for windows, and I searched a lot for something like this but didn't find any application.
Thanks....
Recycled comment.
Sent from my GT-I9003 using Tapatalk

Changed The Thread
Comments Starts From HERE
Recycling Threads

with this no need of busybox right ... good one thanks

kchdeepak said:
with this no need of busybox right ... good one thanks
Click to expand...
Click to collapse
Busy box is needed. But the busybox needed will be 1.16.2 (which will be installed automatically when you Root with SuperOneClick).this busybox version do not contain cp commands.But still you can Deodex

Unrecognized option: -splash:./jar/1.png
i get this error after selecting the 3rd option :-/

bajju123 said:
Unrecognized option: -splash:./jar/1.png
i get this error after selecting the 3rd option :-/
Click to expand...
Click to collapse
If you can't deodex the files the you can use the already deodexed files uploaded by Misledz
Download Deodexed System Files [COMPLETE]

checking....

@vivek... *waiting for phone___*
what to do?

xultimate procedure donr... bt when m going to open QtADB .. it ask for path.. when i place the xultimatum folder path... it repleis "There is no adb binaries here"...
what to do?

Aaditya2 said:
@vivek... *waiting for phone___*
what to do?
Click to expand...
Click to collapse
Flashed & Rooted ???
remove usb cable & connect again in debugging mode ??
Or it may be error in driver files
install kies or update it

Aaditya2 said:
xultimate procedure donr... bt when m going to open QtADB .. it ask for path.. when i place the xultimatum folder path... it repleis "There is no adb binaries here"...
what to do?
Click to expand...
Click to collapse
I think you havent even set up the ADB which is used for develpment & othe management of Android phones
I will provide the link
install the adb and the use Qtadb.exe
How To Set Up ADB/USB Drivers for Android Devices
So most people won’t have to use ADB (Android Debug Bridge) ever, but if you want to learn how or want to get a little more technical with your Android phone, here’s how to get it set up.
I. Setting Up The SDK
1. Download the Latest Android SDK from Google
Android SDK
2. Extract the Android SDK .Zip file to C:\AndroidSDK (this should name the new folder created AndroidSDK in the C directory.
3. On your phone, click Settings > Applications > Development and make sure USB Debugging is on.
4. Plug your phone into your computer via USB cable (it needs to be on). It should say installing drivers if using Windows.
!UPDATE 12.01.09 – If using Windows 7 skip steps 4 and 5 and use this procedure instead.
5. After it installs the drivers, goto the Start menu and type cmd into the search bar (Vista or higher) or click Run then type in cmd (XP) to open the command prompt.
6. Type the following into the command prompt window (hitting enter at the end of every line):
cd\
cd AndroidSDK\tools\
adb devices
browse the C:\AndroidSDK\tools\ as the path whe QtADB asks

up to the 17th step all procedure done succesfully.... bt after rebooting my phone just blinked and stuck on startup screen..... what to do?... reply

Aaditya2 said:
up to the 17th step all procedure done succesfully.... bt after rebooting my phone just blinked and stuck on startup screen..... what to do?... reply
Click to expand...
Click to collapse
samsung galaxy SL screen Or the Boot Screen( Glowing SAMSUNG)??

samsung galaxy SL screen

Aaditya2 said:
samsung galaxy SL screen
Click to expand...
Click to collapse
have you tried the new method for deodexing
the recovery CWM method
try it using the zip file

hmmm... ok... thanx... trying dat one!!!!!!!

Thanks dude. Easy method for deodexing

vivekkalady said:
have you tried the new method for deodexing
the recovery CWM method
try it using the zip file
Click to expand...
Click to collapse
dat also not worked.... i want to deodexing with your method... plz help me....

my phone wont reboot. its boot loop i think. what should i do?

LG LS840 Viper 4g*Unofficial Thread*

RDF for the LS840 AKA VIPER is up
LS840
So far it looks like it will be running Android Gingerbread
OS VersionAndroid 2.3.7
RETURN TO STOCK
05/04/2012 Latest!
LS840ZVC_02.SC_02.P25002.tot
More updates when they come
Software is def. being worked on by the way

Any word on the eta?
Sent from my PC36100 using xda premium

Not yet that I know off

Bump Bump
Sent from my MB855 using Tapatalk

I read that it will be between june and sept. Not confirmed though
Sent from my PC36100 using xda premium

Not sure if you've seen it, but LG open source site has the source code on it already. Since I'm a new member, I can't link to it, but if you search on google for LG Open Source, you should be able to find it.

http://hhtp.umnet.com/mobile-software/0-5546-0-java_j2me_apps-256
Open source
Sent from my PC36100 using xda premium

http://android-app-reviews.com/tag/lg-viper/
April 22!!!

05/04/2012 Latest!
LS840ZVC_02.SC_02.P25002.tot

custom roms for the LG Ls840
I just obtained my LG Viper and have currently rooted the device. I was curious to know if there is any speculation on upcoming custom roms for it, or if there are other roms out there for other devices which will run on the viper>>>

LG Viper Stock Firmware
Please give a copy of stock firmware that I can flash with the stock recovery, I really need it because my phone's bricked!

sextape said:
05/04/2012 Latest!
LS840ZVC_02.SC_02.P25002.tot
Click to expand...
Click to collapse
link is dead. Can you post new link?

do you have a good link for lg viper rom please

compare to LG Revolution, I'd prefer Viper.
dead link on .tot file, could someone re-upload the file please

Unfortunately we still don't have a stable cwm....its being worked on though...many including myself have bricked their viper...and although we have the .tot there's no .dll...i finally came up with a working recovery unbrick method including system and sprint apps...
androidforums.com/viper-4g-lte-all-things-root/613169-fully-working-unbrick-factory-reset-method-incl-system-apps-sprint.html
Sent from my LG-LS840 using Tapatalk 2

I see there isn't much happening on the Viper front. My only question is if anybody knows if this device tethers through BT PAN? The profile is listed but I'm not having any luck. Should I root and go through a tether app?

At least we got ics! Hopefully now a recovery and custom rom get built and we can get this show on the road.

Updated: Unbrick and/or manual ics install
http://forums.androidcentral.com/lg...s840-back-too-ls840zvc-ls840zvd-firmware.html
CREDIT- TJSANDERS
DOWNLOAD LINKS:
ZVD FIRMWARE(2.3.7): http://www.sendspace.com/file/dr4bq7
ZVI FIRMWARE (4.0.4) http://www.dropbox.com/s/aos8cpyjgdytfza/LS840ZVI.zip
1- Unzip to folder of your choice, root of C:\ works easiest IMO.
2- (Make sure you have @ least 60% battery and LG Drivers/ADB Installed.
3- Go to Device Manager -> Ports -> Right click on LGE USB Serial Port -> Properties, Advanced, Change port # to 41
3- Plug phone into pc ( charge only ) , pull battery to reboot, upon reboot hold down volume + PLUS Power To enter D/L mode.
4- Go to extracted Location, right click LGFlashTool, Run As Admin...
5- Check box for Select Manual Mode
( Even if listed, click on ... next to DLL to choose the .DLL in your extracted folder, and do the same for S/W (Click ADD, and add the S/W of your choice )
6- Click Ok..
7- Up Top Click the Icon for Ports
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Check the box for port One ( I know we changed it to 41 in device manager and it may seem incorrect but it is, follow please.
8- Now ready to flash, Click the Yellow arrow at top left to start, THEN, Quickly unplug usb/replug ( This triggers the tool to start, otherwise it will stay stuck at Ready...)(You can just partially remove the usb plug then reinsert very quickly, do not have to completely remove.)
You should see it progressing from this point, it will continue to say 0kb/0kb, just let it do its thing . Sometimes it finishes at 80%, 89%, once your booted to the Home Screen, your done.
9- (OPTIONAL) To prevent any FC's and other errors, upon flashing, immediately do a factory reset.
OP (http://forums.androidcentral.com/lg...40-back-too-ls840zvc-ls840zvd-firmware-3.html) Credit: TJSanders.
PART 2, HOW TO MANUALLY INSTALL ICS 4.0.4 FOR THOSE WHO MAY HAVE NOT GOTTEN OTA UPDATE
1- Download official update.zip http://www.4shared.com/zip/YfxY5dCu/update.html
2- Download ADB: http://www.sendspace.com/file/hurew5
3- Extract ADB.zip to C:
4- Make sure official LG Drivers are installed, if not here is link: http://www.sendspace.com/file/lgixio
5- Place the update.zip in the root of your sd card. (Via USB Storage, or taking card out/using card reader)
**MAKE SURE CHARGE ONLY is CHOSEN and USB STORAGE= OFF BEFORE PROCEEDING**
6- Start -> Run -> cmd (Run as Admin)
4- In Command Prompt type: cd.. -> cd... (Untill you see C
5- Type cd adb
6- type: adb reboot recovery
7- Once booted into recovery, select Install zip from external storage (Home key = select, vol +/- scrolls.
8- Scroll to yes, press Home(Select), and wait about 15 minutes for your ICS 4.0.4 upgrade to proceed. =)
OP(http://forums.androidcentral.com/lg...ide-too-install-android-4-0-4-update-zip.html) CREDIT: TJSANDERS

For those who don't follow the other forum;
We now have two custom recoveries:
Project Open Cannibal Touch
TeamWin Recovery Project 2.3.2.3
A custom rom in the process of being made awesome(SmartViper)
A cusom kernel being worked on by the same person
And finally two people working on building cm10.
And hopefully some day, a forum here on xda
I cannot post links being a new user to xda but they are all available on the androidcentral forums

JoshCo1n said:
For those who don't follow the other forum;
We now have two custom recoveries:
Project Open Cannibal Touch
TeamWin Recovery Project 2.3.2.3
A custom rom in the process of being made awesome(SmartViper)
A cusom kernel being worked on by the same person
And finally two people working on building cm10.
And hopefully some day, a forum here on xda
I cannot post links being a new user to xda but they are all available on the androidcentral forums
Click to expand...
Click to collapse
Custom ZVI kernel built from source by me available today.

[NEW] Micromax Funbook-How to's, ROM's Scripts

Micromax Funbook-How to's, ROM's Scripts
Here are the drivers and tools you almost certainly need.​
http://www.mediafire.com/?t6369ab0ta6x36q --- ADB Drivers
http://www.mediafire.com/?7yh4iaorj01n3d7--LiveSuit-FlashTool
http://www.mediafire.com/?qjxyjz0a86af674-- 2.3.4 ROM
http://www.mediafire.com/?2b2t0mybds03s-- Chinese OEM Ployer MOMO9 ROM 4.0.3
http://www.mediafire.com/?k9n1o5avmy6m6-- Qware ROM 4.0.3
http://www.mediafire.com/?fp2apmx4p2x72di-- Custom ROM by FezzFest
http://www.virtual-productions.nl/QwarePro3/Bootanimations/Pip-boy%203000/ICS/bootanimation.zip-- Fallout Bootanimation
http://www.mediafire.com/?ro9jikqsqdx3i2o -- SCRIPT to install CWM and Gain ROOT.
http://forum.xda-developers.com/showthread.php?t=1378594-- Unofficial CyanogenMod- NOT TESTED
Instructions to use Livesuit--
Firmware upgrade by tool:
Android upgrade process will be formatted with built-in flash memory, if necessary, please backup the data at first.
I. The use of specialized PC terminal upgrade tool
The upgrade file includes: 97F1-D1-H2-H01-N410.20111210.img; the upgrade process is as follows: (in the Windows XP system upgrade for example)
1: Download and unpack the upgrade tool.
2: Download and unpack the upgrade file.
3: To run the upgrade tool in the PC terminal such as LiveSuit.exe [if it is prompted there is need to install the driver, please install FWDN directory driver]. As shown below:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
4. According to user ‘s guide of the LiveSuit, click "select the firmware upgrade file" and added upgrade file “97F1-D1-H2-H01-N410.20111210.img”.to the firmware list,shown as below red area:
5.Turn off the MID first，and press the return key of MID, using USB wire to connect the PC terminal and the MID and then press POWER button ten times; at this point, PC side LiveSuit.exe applications will appear the following interface:
Remark: For first time upgrade, you need to install driver manually, as the
Click on “yes” again will appear the following interface
6. When the upgrade is finished 100% will appear the following interface
Click the OK button, the upgrade is completed, the system will automatically restart.
NOTE: Pug out the USB cable, and the turn on the machine, when machine into the system within one minute, it is best not to operate the machine,because the first time start need to loading some backstage program.
For first time upgrade, you need to install driver manually
I am not responsible for any damage-- HIT THANKS IF I HELPED YOU

Which ROM should i use? ? I flashed using the Qware one, 97F1-D1-H2-H01-N413.20120314* ROM by Eyeoncomputers.
What difference will it make if i use the one by Fezz Fest.

A direct link to the fezzfast Rom?

akhilkapila said:
A direct link to the fezzfast Rom?
Click to expand...
Click to collapse
No I dont think so

Everyone is requested to shift to androidforums.com
There is a separate forum for Funbook there
Here is the link to forum
Funbook
@varunmehra
you did a preety good job in finding these stuffs

cna spmeone give the details of these rom ...nd liknwhere did find it ... and are their any other custom rpms for funbook ?

varunmehra5 said:
Micromax Funbook-How to's, ROM's Scripts
Here are the drivers and tools you almost certainly need.​
http://www.mediafire.com/?t6369ab0ta6x36q --- ADB Drivers
http://www.mediafire.com/?7yh4iaorj01n3d7--LiveSuit-FlashTool
http://www.mediafire.com/?qjxyjz0a86af674-- 2.3.4 ROM
http://www.mediafire.com/?2b2t0mybds03s-- Chinese OEM Ployer MOMO9 ROM 4.0.3
http://www.mediafire.com/?k9n1o5avmy6m6-- Qware ROM 4.0.3
http://www.mediafire.com/?fp2apmx4p2x72di-- Custom ROM by FezzFest
http://www.virtual-productions.nl/QwarePro3/Bootanimations/Pip-boy%203000/ICS/bootanimation.zip-- Fallout Bootanimation
http://www.mediafire.com/?ro9jikqsqdx3i2o -- SCRIPT to install CWM and Gain ROOT.
http://forum.xda-developers.com/showthread.php?t=1378594-- Unofficial CyanogenMod- NOT TESTED
Instructions to use Livesuit--
Firmware upgrade by tool:
Android upgrade process will be formatted with built-in flash memory, if necessary, please backup the data at first.
I. The use of specialized PC terminal upgrade tool
The upgrade file includes: 97F1-D1-H2-H01-N410.20111210.img; the upgrade process is as follows: (in the Windows XP system upgrade for example)
1: Download and unpack the upgrade tool.
2: Download and unpack the upgrade file.
3: To run the upgrade tool in the PC terminal such as LiveSuit.exe [if it is prompted there is need to install the driver, please install FWDN directory driver]. As shown below:
4. According to user ‘s guide of the LiveSuit, click "select the firmware upgrade file" and added upgrade file “97F1-D1-H2-H01-N410.20111210.img”.to the firmware list,shown as below red area:
5.Turn off the MID first，and press the return key of MID, using USB wire to connect the PC terminal and the MID and then press POWER button ten times; at this point, PC side LiveSuit.exe applications will appear the following interface:
Remark: For first time upgrade, you need to install driver manually, as the
Click on “yes” again will appear the following interface
6. When the upgrade is finished 100% will appear the following interface
Click the OK button, the upgrade is completed, the system will automatically restart.
NOTE: Pug out the USB cable, and the turn on the machine, when machine into the system within one minute, it is best not to operate the machine,because the first time start need to loading some backstage program.
For first time upgrade, you need to install driver manually
I am not responsible for any damage-- HIT THANKS IF I HELPED YOU
Click to expand...
Click to collapse
hii thanks for tutorial
I installed the rom 2.3.4 but there is different language can u pls
help me
---------- Post added at 01:34 PM ---------- Previous post was at 01:12 PM ----------
saif kazi said:
hii thanks for tutorial
I installed the rom 2.3.4 but there is different language can u pls
help me
Click to expand...
Click to collapse
ok i found out the language problem

it says "image file invalid" please help ....wht is the problem >?

Need help getting G-sensor to work
I had battery issues with my funbook & at the service center they changed my motherboard. i didn't realized to make a backup of the new firmware they provided, hence when i install any custom firmware rom i can not get G-Sensor to work. So i decided to be brave & opened the tablet cover, here i found out that the new mother board is "inet-97f rev03 zgc 2012-06-15" while earlier was of Rev02. i have attached a picture below too ..
Can some one help me how can i get the G-sensor to work again ?? Please help .... i dont think i have warranty anymore as i opened up the tablet & even i dont have the original software so

[Q] P920 ebl error

Hello, i'm trying to unbrick my device
I downloaded BOOTV21E_AP and _CP
Downloaded lg flashtool 1.2 (i have win7 x64)
I've changed the LGE CDMA USB Serial port to COM41
I go to lgflashtool, place p920dll, and only the bootv21e_ap
i get it ready, and enter s/w mode, tried with umap4boot and without umap4boot]
process starts, says start ebl writing, stays for 90 seconds
then says start ebl error something like that
in the xml logo it gives me a IMEINOTACTIVE error
<?xml version="1.0" encoding="ISO-8859-1"?>
-<REFLASH> -<UNIT> <ESN>IMEINOTACTIVE</ESN> <TIMESTAMP>20130215134340</TIMESTAMP> <RESULT>FAIL</RESULT> <SOFTWARE_NAME>LG FlashTool</SOFTWARE_NAME> <SOFTWARE_VER>1.2</SOFTWARE_VER> <OEM_NAME>LG</OEM_NAME> </UNIT> </REFLASH>
So, i tried with smart flashtool, go to rom copy d/l, place the _ap and the _cp,
it starts and pass the ebl error, but gives me a timeout when making something with partitions, tried to put only _ap and only _cp
strange thing is that i didn't used the umap4boot, so it never gets out of s/w mode, but it gave me timeout error.
PS: is s/w mode download mode?
please help me:crying:

AW: [Q] P920 ebl error
Yes sw mode is downloadmode, try to flash a bin file. For example xbsas ported rom. Or try flashing kdz file tbis works for sure
Sent from my LG-SU760 using xda app-developers app

Same here.
i have exactly the Same Problem.
do you have any solution?

Well i've managed to flash the P970_CP from this tuto http://forum.xda-developers.com/showthread.php?t=1629307
but ic an't flash _ap
using smart flashtool[
always timeout at 19-20%

Again the Same
jeah its because the phone leave the S/W MODE.
flashing the CP is useless for us..

bellu1992 said:
i have exactly the Same Problem.
do you have any solution?
Click to expand...
Click to collapse
1) Turn off the antivirus program if running.
IMPORTANT DISABLE LG Virtual Modem from Control Panel> Device Manager> Modems> (Image is attached Bellow)
2)Extract downloaded smartflash.
3)Open Extracted Smartflash folder,
4) Now right click on B_SmartFlashTool_Extern.exe file in Smartflash folder and RUN AS ADMINISTRATOR.
5)*Run smartflash tool.
*Select- ROM copy D/L
*Connect your phone (Keep pressing Vol+(up) and connect to USB)
*com port automatic get selected. ( If drivers are installed correctly)
*Select CP bin
*Select AP bin
*Hit Start
OMG WORKED FOR ME
THANK GOD.

theres no virtual modem...

Make sure you installed correctly all drivers
try to install drivers from this topic
http://forum.xda-developers.com/showthread.php?t=1244490

IT WORKS
THANKS YOU!!!!!!
Im soooooo happy

pin70 said:
1) Turn off the antivirus program if running.
IMPORTANT DISABLE LG Virtual Modem from Control Panel> Device Manager> Modems> (Image is attached Bellow)
2)Extract downloaded smartflash.
3)Open Extracted Smartflash folder,
4) Now right click on B_SmartFlashTool_Extern.exe file in Smartflash folder and RUN AS ADMINISTRATOR.
5)*Run smartflash tool.
*Select- ROM copy D/L
*Connect your phone (Keep pressing Vol+(up) and connect to USB)
*com port automatic get selected. ( If drivers are installed correctly)
*Select CP bin
*Select AP bin
*Hit Start
OMG WORKED FOR ME
THANK GOD.
Click to expand...
Click to collapse
I have the same problem my P925 thrill when installing ICS 95s at the time of an error and the log shows the following message
<? xml version = "1.0" encoding = "ISO-8859-1">
<REFLASH>
<UNIT>
<ESN> IMEINOTACTIVE </ ESN>
<timestamp> 20130307065420 </ TIMESTAMP>
<result> FAIL </ result>
LG <SOFTWARE_NAME> FlashTool </ SOFTWARE_NAME>
<SOFTWARE_VER> 1.2 </ SOFTWARE_VER>
<OEM_NAME> LG </ OEM_NAME>
</ UNIT>
</ Reflash>
How I can solve p this?

flashing lg p925
hi I am using p925 I am trying to flash us ing smart flash tool. It is showing magic numbers donot coincide. what shall i do now. can i have some help please....

pin70 said:
1) Turn off the antivirus program if running.
IMPORTANT DISABLE LG Virtual Modem from Control Panel> Device Manager> Modems> (Image is attached Bellow)
2)Extract downloaded smartflash.
3)Open Extracted Smartflash folder,
4) Now right click on B_SmartFlashTool_Extern.exe file in Smartflash folder and RUN AS ADMINISTRATOR.
5)*Run smartflash tool.
*Select- ROM copy D/L
*Connect your phone (Keep pressing Vol+(up) and connect to USB)
*com port automatic get selected. ( If drivers are installed correctly)
*Select CP bin
*Select AP bin
*Hit Start
OMG WORKED FOR ME
THANK GOD.
Click to expand...
Click to collapse
Thank you bro, worked!
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

How to Root LG G3 Stylus

How to Root LG G3 Stylus
by:
Apriansyah Bintang​
Ok My Brothers, this is my first post on XDA Developer and I am not an expert in android technology, but I want to share with you how to root the LG G3 Stylus.
Caution:
-------------------------------
1. I'm not responsible for any damage incurred.
2. This Method only for LG G3 Stylus
3. Not recommended if you have updated the firmware and / or applications On The Air (OTA).
4. Do not hesitate to ask if having difficulty.
5. Good Luck.
6. Thanks for Hard13 from kaskus indonesia for your help.
7. Thanks for @thecubed for your tool at :http://forum.xda-developers.com/lg-g3/development/root-root-lg-g3-easily-purpledrake-lite-t2821000
8. Sorry for my bad english.
9. Your Thumb Please..
Okay, let's prepare the files to the root:
1. Go to settings> general> about phone> general> Software information> Software> click 7 times the build number / numbers manufacture. It will appear in the settings menu "developer option."
2. Go to settings> general> developer option> enable "usb debbuging."
3. Download LG G3 Stylus drivers here > install in xp, win 7 or win 8> connect your device with usb cable to the computer and let Windows install the driver perfectly.
4. Dowload Tool here > extract this tool it name "PurpleDrakeLite" > click "purpledrake_windows.bat."
5. And now prepare the usb cable that was attached to the computer first and plug it into your devices (Make sure your devices in MTP mode).
6. Then will appear the notification that pop up from your devices, it asking: "are you will always accept to receive usb debbuging from your computer." but leave this pop up alone and do not tap anything until you click "root tool" in your computer it name: “purpledrake_windows.bat.” then there will be a 'sighting' like this.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
7. Tap enter on your laptop in “purpledrake_windows.bat" application.
8. Tap OK in pop up that has appeared in your devices (number 6).
9. Than the application in your laptop will show like this.
10. Tap "enter" and your device will reboot and going to the "download mode" or what ever it name, look like this:
11. And the application in your laptop will show like this:
12. Click "enter" on your computer to install the application permalink innate superuser "purpledrake_windows.bat," and it looks like this:
13. After completion of the above process your device will restart once, TADAAAAA ... it already rooted.
14. And Install SuperSU form PlayStore.
15. Finish and thank you for reading my post (Apriansyah Bintang).
16. If you do not understand yet please see the tutorial at yutube, here : https://www.youtube.com/watch?v=hAD8bcNWCD4.
-------------------------------------------------------------------------------------------------------------------------------------
ANOTHER WAY ROOT LG G3 STYLUS
by : Apriansyah Bintang
Okay with it . We will root the LG G3 Stylus another way :
A. PREPARATION
1. Go to setting > general > about phone > general > Software information > tap 7 times the build number. Then the menu "developer option" will appear in the settings.
2. Go to setting > general > about phone > general > developer option > enable "USB debugging."
B. STEPS ROOT
1. Download Vroot through your laptop, here
2. After the program vroot is downloaded please execute of the laptop (phone already connected with a USB cable) and press "connecet device."
3. Then there will be a pop-up confirmation notice "USB debugging" in your phone then leave it alone.
4. Vroot force us to install some Chinese language applications, just press "OK" it can be removed anyway.
5. After installing the Chinese language application then please press the button ROOT, it is gren button in the bottom corner.
6. After installing a root system then your phone will reboot, wait until vroot finish loading and installing a Root System in our phone.
7. Then go playstore and install SuperSU > intsall > open SuperSU > update binaries > reboot . NOTE : When the update binaries in SuperSU will pop up comes across chinese speaking, this default application vroot, please click "right button" it mean: "yes.
8. Reboot. Done .
-------------------------------------------------------------------------------------------------------------------------------------
ROOT LG G3 Stylus without Computer/Laptop
by:
Apriansyah Bintang
There is the latest way to root LG G3 Stylus without a PC but not recommended because after I upload it to mediafire the file infected with a virus, which is a shortage Kingroot always considered a virus by all scanweb and antivirus in the world.
But if you want to, please download here, or here.
Just press the green button and then it would root your LG G3 Stylus. And do not install SuperSU, because SuperSU is already included in Kingroot Application.
Thanks for reading my article.

May I ask where/how did you find this info?
I plan to buy this phone soon if it can be rooted.

t88 said:
May I ask where/how did you find this info?
I plan to buy this phone soon if it can be rooted.
Click to expand...
Click to collapse
from my friend hard13 @Kaskus Indonesia..

boot.img
you can backup the boot.img for me ? Thank you very much
I need lg g3 stylus boot.img

Thanks for the tutorial...
But where the official thread of G3 Stylus on yhis room..

seethegoeh said:
Thanks for the tutorial...
But where the official thread of G3 Stylus on yhis room..
Click to expand...
Click to collapse
I think there is no Official Thread yet.

qingfengxiaocao said:
you can backup the boot.img for me ? Thank you very much
I need lg g3 stylus boot.img
Click to expand...
Click to collapse
Over here bro...:
http://forum.xda-developers.com/android/general/how-to-flashing-lg-g3-stylus-t2940895
download boot image on number 3. (LG Stock Firmware Indonesian.)

I know that
but I mean I need boot.img rather than D69010c_00.KDZ
if your lg g3 stylus is root ,you can use android adb to backup your lg g3 stylus's boot.img and send for me .
Because I can't unpack D69010c_00.KDZ to look for boot.img
Thank you very much

apriansyahbintang said:
I think there is no Official Thread yet.
Click to expand...
Click to collapse
So sad.. :crying:
I think this phone not only sale in indonesian markets.
And no develop team for this phone..

No It not true, this phone still new. Just wait for Official LG G3 Stylus Forum.

boot.img LG G3 Stylus LG-D693n
https://mega.co.nz/#!OI0hWZ4D!FpicAx9uuAT8bNgo68mSePo2cUYxL8zxtbTb6z9xPFY

nice info bro...
im just using VROOT and it works..

do you have LG G3 Stylus LG d690 boot.img?
marcozm said:
boot.img LG G3 Stylus LG-D693n
Click to expand...
Click to collapse
do you have LG G3 Stylus LG d690 boot.img?

cygnus39 said:
nice info bro...
im just using VROOT and it works..
Click to expand...
Click to collapse
Yes... this is the link of vroot...

Is there any way to get a recovery on it?

Terimakasih, Sukses Selalu, dan Terus Berbagi
Mas Bintang Maturnuwun ya
Infone sangat simple dan mudah dipahami bagi penginyongan sing ora jegos bahasa inggris..
Btewee... di info dong selanjutnya enaknya ngapain nih kita sama LG g3 stylus yang sudah di root....
terimakasih.. keep sharing yo kang '''

This method seems not to be working since the last OTA update (v10). I was able to root using Vroot, though.

Vroot is malware? this is what i read in some places

Takada Tapiono said:
Mas Bintang Maturnuwun ya
Infone sangat simple dan mudah dipahami bagi penginyongan sing ora jegos bahasa inggris..
Btewee... di info dong selanjutnya enaknya ngapain nih kita sama LG g3 stylus yang sudah di root....
terimakasih.. keep sharing yo kang '''
Click to expand...
Click to collapse
Gabung aja di facebooknya gan, ane adminnya, jangan lupa jempolnya dong:
https://www.facebook.com/groups/1560147754206280/

evertonjcorreia said:
This method seems not to be working since the last OTA update (v10). I was able to root using Vroot, though.
Click to expand...
Click to collapse
Nope it not true...