This Method Is The method Used By Me For deodexing Gingerbread XXKPE .I used This Method Because I was Not able to install BusyBox (ie The cp command didn't Work.so I was not able to copy the deodexed files to phone .So That the phone did not boot,stuck at the booting time).
Use This Method If Every Method For Deodexing Fails.
Steps
1.) flash to new XXKPE gingerbread Rom
2.) Root Your Phone
3.) download xUltimate-v2.2.8 xUltimate-v2.2.8
Note: You can use the already deodexed files by downloading this link Download Deodexed System Files [COMPLETE] then Goto step 11
4.) Unzip xUltimate v2.2, and launch "Main.exe"
5.) If everything goes well xUlt should recognize the phone and make a connection. You now should see a list of options.
6.) Run option 1. After option 1 is done, run option 2.
7.) Now these well take a while. Run option 3.
8.) IMPORTANT: After you have run option 3
9.) Now run option 4, and wait.
10.) Exit xUltimate, and put the phone in USB debugging Mode
11.) Download QtADB_0.8.0_windows_with_libs.zip
QtADB_0.8.0_windows_with_libs.zip
12.) Open It QtADB (left side - Browse to the xultimate folder, Right Side System folder)
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
13.) copy all the in the done_app folder to the app folder in the phone side
14.) type odex in the filter textbox (phone side) and you will see all the odex files.select all and delete them
15.) copy all the files in done_frame to framework folder in the phone side
16.) type odex in the filter textbox (phone side) and you will see all the odex files.select all and delete them
17.) Reboot
Note 1: Rebooting Will take some time .its due to the new caching of files
Note 2: If Copying Get Stuck At somewere ,NO PROBLEM just Recopy The files Until all files are copied
Forget deodoxed process, and thank you brother for This explorer for windows, and I searched a lot for something like this but didn't find any application.
Thanks....
Recycled comment.
Sent from my GT-I9003 using Tapatalk
Changed The Thread
Comments Starts From HERE
Recycling Threads
with this no need of busybox right ... good one thanks
kchdeepak said:
with this no need of busybox right ... good one thanks
Click to expand...
Click to collapse
Busy box is needed. But the busybox needed will be 1.16.2 (which will be installed automatically when you Root with SuperOneClick).this busybox version do not contain cp commands.But still you can Deodex
Unrecognized option: -splash:./jar/1.png
i get this error after selecting the 3rd option :-/
bajju123 said:
Unrecognized option: -splash:./jar/1.png
i get this error after selecting the 3rd option :-/
Click to expand...
Click to collapse
If you can't deodex the files the you can use the already deodexed files uploaded by Misledz
Download Deodexed System Files [COMPLETE]
checking....
@vivek... *waiting for phone___*
what to do?
xultimate procedure donr... bt when m going to open QtADB .. it ask for path.. when i place the xultimatum folder path... it repleis "There is no adb binaries here"...
what to do?
Aaditya2 said:
@vivek... *waiting for phone___*
what to do?
Click to expand...
Click to collapse
Flashed & Rooted ???
remove usb cable & connect again in debugging mode ??
Or it may be error in driver files
install kies or update it
Aaditya2 said:
xultimate procedure donr... bt when m going to open QtADB .. it ask for path.. when i place the xultimatum folder path... it repleis "There is no adb binaries here"...
what to do?
Click to expand...
Click to collapse
I think you havent even set up the ADB which is used for develpment & othe management of Android phones
I will provide the link
install the adb and the use Qtadb.exe
How To Set Up ADB/USB Drivers for Android Devices
So most people won’t have to use ADB (Android Debug Bridge) ever, but if you want to learn how or want to get a little more technical with your Android phone, here’s how to get it set up.
I. Setting Up The SDK
1. Download the Latest Android SDK from Google
Android SDK
2. Extract the Android SDK .Zip file to C:\AndroidSDK (this should name the new folder created AndroidSDK in the C directory.
3. On your phone, click Settings > Applications > Development and make sure USB Debugging is on.
4. Plug your phone into your computer via USB cable (it needs to be on). It should say installing drivers if using Windows.
!UPDATE 12.01.09 – If using Windows 7 skip steps 4 and 5 and use this procedure instead.
5. After it installs the drivers, goto the Start menu and type cmd into the search bar (Vista or higher) or click Run then type in cmd (XP) to open the command prompt.
6. Type the following into the command prompt window (hitting enter at the end of every line):
cd\
cd AndroidSDK\tools\
adb devices
browse the C:\AndroidSDK\tools\ as the path whe QtADB asks
up to the 17th step all procedure done succesfully.... bt after rebooting my phone just blinked and stuck on startup screen..... what to do?... reply
Aaditya2 said:
up to the 17th step all procedure done succesfully.... bt after rebooting my phone just blinked and stuck on startup screen..... what to do?... reply
Click to expand...
Click to collapse
samsung galaxy SL screen Or the Boot Screen( Glowing SAMSUNG)??
samsung galaxy SL screen
Aaditya2 said:
samsung galaxy SL screen
Click to expand...
Click to collapse
have you tried the new method for deodexing
the recovery CWM method
try it using the zip file
hmmm... ok... thanx... trying dat one!!!!!!!
Thanks dude. Easy method for deodexing
vivekkalady said:
have you tried the new method for deodexing
the recovery CWM method
try it using the zip file
Click to expand...
Click to collapse
dat also not worked.... i want to deodexing with your method... plz help me....
my phone wont reboot. its boot loop i think. what should i do?
Related
Hi,
I made a Backup & Recovery Script in the German Android Hilfe Forum for the Galaxy 3.
The Tool make a flashable Rom with 3 Clicks and Restore the Backup with one Flash and one Click.
The Script restores all Apps, app Data Google Account and Wifi key´s.
How To:
1. Unzip the Alexgalaxys G3 Recovery v2.3.zip wherever you want
2. Plug your Phone in USB Debugging Mode to you Computer
3. Start the Backup.bat
4. Grant Superuser Permissions (6 or 7 times)
5. Your backup is finished
In the "Alexgalaxys G3 Recovery v2 Final" Folder now is a CustomRom.tar.
Flash it as One Package.
If the Phone is started plug the Phone in Usb debugging mode and Run the Recovery.bat after it is complete you have to reboot you Phone.
[!!!] Please download the new version 2.3 v2.2 had a Bug in the tar.exe [!!!]
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
deskjeti said:
Hi,
I made a Backup & Recovery Script in the German Android Hilfe Forum for the Galaxy 3.
The Tool make a flashable Rom with 3 Clicks and Restore the Backup with one Flash and one Click.
The Script restores all Apps, app Data Google Account and Wifi key´s.
How To:
Unzip the zip file wherever you want and plug in your Phone with USB Debugging Mode.
Run the Step1 and wait, after Step1 is finished run Step2 and if Step2 finished Run Step3
In the "Alexgalaxys G3 Recovery v2 Final" Folder now is a CustomRom.tar.
Flash it as One Package.
If the Phone is started plug the Phone in Usb debugging mode and Run the Recovery.bat after it is complete you have to reboot you Phone.
Link: http://www.multiupload.com/NV0CFVYV2I
Click to expand...
Click to collapse
Does this effectively restore data?
You overcame the bootloop then ?
Why the 3/2 step approach ?
It dont restore the complete /data partition,
if i would do this it would give a bootloop.
It Restores the apps, app data wifi keys and some other informations.
@Bubble-be
If i run the 3 Scripts in only one script it doesnt work.
I tryed to make it one click but it dont work, i dont know why.
And it dont will give a bootloop
So I just studied the files, and it is almost the exact same thing as my backup method, except it is all adb
deskjeti said:
@Bubble-be
If i run the 3 Scripts in only one script it doesnt work.
I tryed to make it one click but it dont work, i dont know why.
And it dont will give a bootloop
Click to expand...
Click to collapse
Try adding these at the end
Code:
Call .\Step2.bat
at the end of Step1.bat
Code:
Call .\Step3.bat
at the end of Step2.bat
ok thanks i will try it
deskjeti said:
ok thanks i will try it
Click to expand...
Click to collapse
I already did it for you
deskjeti said:
Hi,
I made a Backup & Recovery Script in the German Android Hilfe Forum for the Galaxy 3.
The Tool make a flashable Rom with 3 Clicks and Restore the Backup with one Flash and one Click.
The Script restores all Apps, app Data Google Account and Wifi key´s.
How To:
Unzip the zip file wherever you want and plug in your Phone with USB Debugging Mode.
Run the Backup.bat
In the "Alexgalaxys G3 Recovery v2 Final" Folder now is a CustomRom.tar.
Flash it as One Package.
If the Phone is started plug the Phone in Usb debugging mode and Run the Recovery.bat after it is complete you have to reboot you Phone.
Click to expand...
Click to collapse
I saw you reuploaded. Don't even use this code. It isn't needed in any of them. My advice? Delete them
Code:
Call .\adb.exe
or
Code:
Call .\tar.exe
It looks cleaner.
Also, would you like me to create a DOS gui for it?
Ok thanks,
i will delete the codes in the next version
And a gui would be really nice
deskjeti said:
Ok thanks,
i will delete the codes in the next version
And a gui would be really nice
Click to expand...
Click to collapse
Alright! Same color as the Lestatious updater?
yes the color form the updater looks nice
deskjeti said:
yes the color form the updater looks nice
Click to expand...
Click to collapse
Alright. Seeing as how you created this, instead of using my ADB method, do I have permission to use this as a backup tool for Lestatious?
yes you can use it, but pls wait 1 minute ^^ i fonund a bug and will upload a new version in few minutes
Okay new Version is online
with cleaner script and bugs fixed
deskjeti
I send you an pm with a link to my old script...
Can be useful for something xD
cya
Okay new version 2.3 online, now the tar.exe will make a flashable .tar one package
Tried .update.bat closes
Can u give clean steps to do it..
Thanks
You mean the Backup.bat ?
Ok i will write a How to but my English is not very good
[TUTO] How to deodex stock rom for galaxy S DUOS S7562
In the world of Android, a lot of themes, tweaks and tricks require the need of a Custom Deodexed rom. Deodexed roms are firmwares where the .APK files of the System Software itself are packaged in a way so that they can be modified easily without causing any harm to the framework or the Android Environment.
This tutorial will cover all the steps required to deodex stock rom for galaxy s duos s7562, so that you don’t need to install a Custom Rom yourself!
Disclaimer: Follow all the instructions carefully mentioned in this article, I should not be held responsible in any manner if your Android Device doesn’t boot up or gets bricked due to not following the instructions.
Required :
1. Your device should already be rooted.
2. You should already have Android ADB in your computer and should have basic ADB knowledge.
3. JDK already installed in you’re PC (http://www.oracle.com/technetwork/java/javase/downloads/jdk7u9-downloads-1859576.html)
4. 7zip installed (http://www.7-zip.org/download.html)
5. Cygwin installed (http://www.cygwin.com/)
6. dsixda's Android Kitchen installed (http://forum.xda-developers.com/showthread.php?t=633246)
7. Busybox should already be installed in your device.
8. CWM already in you’re phone
9. Make nandroid backup (just in case).
10. sgs2toext4.jar ((created by drphrozen) attached
11. DiskInternals LinuxReader (http://www.diskinternals.com/download/Linux_Reader.exe)
Tutorial :
1. Download you’re favorite stock rom
2. Use 7zip to extract it (ignore errors)
You will have these files, we need only system.img.ext4
3. We have to convert it to ext4 format with sgs2toext4.jar
Open a command window and set the directory where you have sgs2toext4.jar file.
Now type sgs2toext4.jar and press enter
The .jar will run in a new window & will ask you to drag & drop the system.img.ext4 file there.
Do the same and wait till the process completes
4.Open the results file with DiskInternals LinuxReader an extract all files in new folder named system
5.Compress the system folder with 7zip (tar and store format) named system.img.ext4.tar
6.Put the file in kitchen folder (in original_update)
7.Lunch Cygwin terminal an cd to kitchen folder and load the menu (./menu)
You have to modify the API from 10 to 15
Look the file in C:\cygwin\home\user\kitchen\tools\deodex_files (api_level.txt)
8.Choose option (1) and do like these :
9.Choose option (0) ADVANCED OPTIONS
10.And then option (11) deodex files in your ROM
Then (b) deodex both folders and then
Take a caffe and be patient, the operation take a time to finish, if all operation finish without problem you will have this :
However, some apks failed to deodex, see the screenshot, for me only one apk failed it’s not very important
To resolve this, go to :
C:\cygwin\home\user\kitchen\WORKING_xxxxxx_xxxxxx\system\app\
and delete the odex apks (you can recognize them by their respective .odex files present in the same folder)
Make sure to delete both apk as well as its respective .odex file.
you can close the kitchen now if you do not want to add more MODs
THATS IT ! you have successfully deodexed both /system/app as well as /system/framework/.
Now to port the deodexed rom do the following :
11.Copy both app and framework folders to your sdcard, from :
C:\cygwin\home\user\kitchen\WORKING_xxxxxx_xxxxxx\system\
12.Connect your phone to computer.(Make sure you have select USB debugging in Settings>Developer options>USB debugging
13.Open Command prompt, Goto folder where android sdk installed. Then goto platform-tools folder in it. Right click on free space in folder while pressing shift key.Select open command prompt here.
Now enter commands. )
14.Enter following codes:
Code:
adb shell
su
stop
mount -o rw,remount /system/ /system/
cp /sdcard/app/* /system/app/
rm /system/app/*.odex
cp /sdcard/framework/* /system/framework/
rm /system/framework/*.odex
mount -o ro,remount /system/ /system/
reboot
(if you are using adb shell in su for the first time, keep phone screen on. After entering "su" code, super user request prompt in phone. Press allow )
who look for my cygwin i used in this tuto
https://docs.google.com/folder/d/0B7VA567j483ubnBUMXBvamswN3M/edit?pli=1
just extract it in c:\ lunch Cygwin.bat it will creat your user folder in c:\cygwin\home
then move kitchen folder in cygwin\home to your user folder created
cheers
all credits goes to devs from this great forum
Que
what is the use of deodexing Rom.what is its main advantage. in galaxy s duos
Cool.. is there any themes available for S duos?
Phelin said:
Cool.. is there any themes available for S duos?
Click to expand...
Click to collapse
Yes, check out the theme I made
http://forum.xda-developers.com/showthread.php?t=2276756
Hit thanks if I helped
sent from GT-S7562 , with a better stock ROM
Check out the theme I made specially for galaxy s duos.c1
This is the v2.00
Here are the screen snaps
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
The link to theme is
http://forum.xda-developers.com/showthread.php?t=2279483
Sent from my GT-S7562 using xda app-developers app
V3.00 greenblast theme for s duos is released
Link
http://forum.xda-developers.com/showthread.php?t=2279483
Lockscreen
Tap to select in toggles is changed
Have a look
Sent from my GT-S7562 using xda app-developers app
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
The swipe 3d life x74 tablet development thread!!! ( NOW DEV NOT SUPPORTED )
The really old and boring swipe tablet 3D life x74 tablet is no longer boring now as the root has been discovered.
This tab is pre rooted and has all the binary files setup correctly such as su and busy box
To check whether you have the binary files in the system follow this tutorial.
1) Download and install Xplore file manager from google play ( free)
2) open the app and go to system/xbin and check for busybox (maynot be present) and su (Should be Present). If they are present then the files are in corect order or position.
IF THE FILES ARE NOT PRESENT THEN SEE MY SECOND POST ON HOW TO ROOT YOUR SWIPE 3D LIFE TABLET * IF THE FILES ARE PRESENT THEN CONTINUE READING THIS POST
3) Now we know that the files are present, we install superuser app from google play by chainsdd (free)
4) now install root checker from google play (free)
5)Now open Root Checker and click check root. A popup will come and it will ask for root permissions, so click accept and after this the checker will show root is present. Yay now we have root perms.
6)now scroll to the right side screen and check for busybox. After confirmation you will be happy and you can party
AND THUS WE SUCCESSFULLY CHECKED AND INSTALLED ROOT AND SUPERUSER ON SWIPE 3D LIFE TABLET
Drivers for Swipe 3d life Tablet:-
Download Link
1) First unpack the RAR file
2)Now plug in your tablet
NOTE:- First Switch ON the debuging Mode for this to apply
3)When it shows no drivers have been Installed, CLick on it, Open the uninstalled driver settings---> update Driver --> Browse for files on my computer --->Selected the driver folder you unpacked
4)There will be many notifications ( 1 or 2 ) just click yes or accept (whatever )
5) Voila your drivers will be installed accordingly
More to come
pls like if helped
Re: [ROOT] Swipe 3d life x74 Tablet[Developement]
INSTALL SU AND BUSYBOX BINARY FILES ON YOUR SWIPE TAB
ROOT YOUR TABLET :-
A file named ROOTx for Alll the Tabs have been made recently By Me:-
The file is available at my XDA thread :
Click HERE To Download
Click to expand...
Click to collapse
Follow the Onscreen Instructions and Root Your Tablet
Always Check your Root @ Root Checker Pro (or free @ PlayStore Link)
for More Info Pls visit CHainFires Site
Go->
Add BusyBox support :-
Install BUSYBOX application by Stephen (Stericson) on Play store
LINK
Click to expand...
Click to collapse
When the app is installed, Open it and install Busybox (Its a button) (EASY ENOUGH )
Pls press Like if Helped
Recovery mode on your Tablet Device
CWM 6.0.2.8 Has been succesfully ported by me to our unknowingly awesome Tablet
DOWNLOAD LINK :-
http://d-h.st/uZB
Procedure to install :-
1) Copy and paste files of the ZIP file in the INTERNAL SD-Card, Folder CWM
*Note - Name the folder same as given as we need it in the Code
2) connect your tablet
3) Shift + Right click on the window and choose "Open Command Window here"
4) Now type the following code :-
Code:
adb shell
cd /sdcard/CWM
sh install-recovery.sh
sh reboot-recovery.sh
If the last Command doesnt work then dont panic, go to settings -> Backup and Reset -> Recovery Mode
AND CHECK OUT CWM
Hit LIKE For every help
Roms FOR Swipe 3D life tablet
UPDATE :- CWM HAS BEEN PORTED TO OUR DEVICE (THANXX TO ME !!!)
IT WILL BE UPDATE SOON SO DONT THEME YOUR ROMS NOW
++++++OLD UPDATE++++++
As the inbuilt recovery mode is not functional, we shall push and pull system ui and frame work files
TUTORIAL/PROCEDURE :-
*FIRSTLY COPY AND PASTE THESE FILES IN YOUR ADB FOLDER without any folder like this
* files to be available soon
1) First take your tablet and plug it in (Debug Mode On )
2) Open your ADB Files ( link on above post )
3) Shift+Right click on the window and choose "Open Command Window Here
4) Type the following code and hit enter per line given in the following code
5) PLS USE The SAME CASE OF LETTERS as in CAPITAL and SMAILL LETTERS
6) DONT BLAME ME FOR ANY PROBLEM. JUST COMMENT HERE SO THAT IT CAN BE RESOLVED
Code:
adb devices
adb shell
cd /system/app
rm SystemUI.apk
exit
adb shell
cd /system/framework
rm framework-res.apk
exit
adb push SystemUI.apk /system/app
adb push framework-res.apk /system/framework
adb reboot
AFTER REBOOT YOU WILL SEE YOUR NEW BATTERy ICONS AND NEW NOTIFICATIONS ICONS
Thank me for every help
Can any one provide me the build.prop from their tab? ?
Sent from my Xperia Sola
bro can anybody here help with the locked swipe 3d tab after unsuccessful pattern lock attempts? How to enter its stock recovery to factory reset? Tried vol+, vol-, both vol+ and vol- along with power button. But all in vain.
I am sorry everyone but my tab is broken so its in repair, any further dev will be delayed
Sent from my Nexus S using Tapatalk 2
rmivuxgc said:
bro can anybody here help with the locked swipe 3d tab after unsuccessful pattern lock attempts? How to enter its stock recovery to factory reset? Tried vol+, vol-, both vol+ and vol- along with power button. But all in vain.
Click to expand...
Click to collapse
if it is on usb debugging,
then root the tab and do wipe all.
tested with volcano tool
riteshgpt60 said:
if it is on usb debugging,
then root the tab and do wipe all.
tested with volcano tool
Click to expand...
Click to collapse
It will work allright that way, but many havent rooted their tabs
Sent from my Galaxy Nexus using Tapatalk 2
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Tutorials and the tools are not my work, so I don't take any credit. However, the tutorial is come from China. I combine my experience and translate them as much as I can to english.
Instructions:
First, download the root files (at the bottom of this post) accroding to your tablet model (at the back of your tablet) and install the driver in the computer.
Please install in the following order:
1) iSocUSB-Driver-Setup-1.2.0.exe
2) IntelAndroidDrvSetup1.5.0.exe
3) PhoneFlashTool_5.3.4.0_win32.exe
Pay attention to the following points
a) you must install those driver in the above order
b) Don't change the install location of those driver
c) Close your antivirus software to avoid unknow problem
Then, go to Settings>Developer Options>USB Debugging. Enable OEM Unlock and enable USB Debugging Mode
Now, connect your X80 Plus to the computer,
Open a Command Prompt window in "Root X80 Plus H6C3" folder (To open a Command Prompt window in any folder, hold down the shift key and right-click on the folder) and enter the following command
Code:
adb reboot bootloader
Press Enter
Wait for the device to enter fastboot mode
Code:
fastboot oem unlock
Press Enter to unlock the oem and enter the following command
Code:
fastboot flash boot boot.img
Press enter to flash the kernal, then enter the following command
Code:
fastboot reboot
This command will restart your tablet.
It is normal that tablet reboot 3 to 4 times automatically, just wait for it. (turn on the tablet yourself if the tablet do not reboot automatically)
After your device is on, check that Wifi and bluetooth works or not. (Wifi and Bluetooth may not works with the replaced kernal, just perform a factory reset)
If everything is ok, enter the following command
Code:
root.bat
Wait for the Command Prompt until it stuck at this command, "adb shell su --daemon"
Now, disconnect the tablet and reboot it manuly
After the device was booted up, Supersu already become a part of system app.
Open Supersu now, it will notify that the SU binary needs to be updated. You must need to install the binary once, but you will fail at 100%(unless there is a miracle, and your tablet is root successfully, congratulations)
Close Supersu and reconnect the tablet, enter the following command again.
Code:
root.bat
Now the command prompt should run all of the command smoothly and Supersu should have no message about the SU binary update !!
Therefore, if your Supersu shows nothing (works properly), your tablet is rooted, thats amazing.
If Supersu keep notifing, please enter the following command again and wait for it to boot up automatically until Supersu have no message about the binary update.
Code:
root.bat
Note that this root method are not stable yet
Known issues:
1) Old version of Titanium Backup was unable to execute the SU command
2) LBE are not 100% compatible with this root
Post reply if you have any requires or problem.
Stock Rom for X80 Plus just in case you need them, and the instruction will be translated later
H6C3 and H5C5
Root files: H6C3 and H5C5
Sorry for my bad english
Hi and thanks for sharing.
Is there a custom recovery to install?
I would like to install xposed framework, but don't know how to install the zip file...
Thanks
thanks and your thread on teclast's forum where the link was crash, please repair.
Thanks a lot
Can someone confim that this method works?
Jeconxis said:
thanks and your thread on teclast's forum where the link was crash, please repair.
Click to expand...
Click to collapse
You can try to flash xposed using flashify!
woody4165 said:
Hi and thanks for sharing.
Is there a custom recovery to install?
I would like to install xposed framework, but don't know how to install the zip file...
Thanks
Click to expand...
Click to collapse
Working hard on it now
hahaha1111 said:
Working hard on it now
Click to expand...
Click to collapse
looking forward to this!
Thaaanks a lot @hahaha1111 !!! I tried that on my all new H6C4 received this morning with your H6C3 files and anything is working perfectly !!! Many thanks again !!!
BTW: Any way to update SuperSU binary then?
I tried your method on my H5C6 and it worked beautifully. Thank you!
where can I use the file?
I download the file named X80 plus-win10_20160108.7z from the link. what is this, and where can I use it?
hahaha1111 said:
Working hard on it now
Click to expand...
Click to collapse
Hi @hahaha1111
any news on custom recovery?
I would like to install xposed framework, but cannot be done without custom recovery, is it correct?
Thanks
woody4165 said:
Hi @hahaha1111
any news on custom recovery?
I would like to install xposed framework, but cannot be done without custom recovery, is it correct?
Thanks
Click to expand...
Click to collapse
Hiatus
H6C4
Great! It works perfectly on H6C4.
Thanks!
Regards
RoroTiti said:
Thaaanks a lot @hahaha1111 !!! I tried that on my all new H6C4 received this morning with your H6C3 files and anything is working perfectly !!! Many thanks again !!!
BTW: Any way to update SuperSU binary then?
Click to expand...
Click to collapse
It's updated from play market with no problem.
May be it is my particular problem ( kernel 3.14.37 firmware assembly ver 3.03.20161109) but.....
WARNING TO H6C4 OWNERS! SD Card becomes unusable with this rooting files. Any SD Card after rooting recognized as 0,9 Mb size and you can't access files on it. You can't use SD Card reader too.
Please report if you do not encounter this issue.
Hi.
I'm stuck on "adb push SUfiles/Superuser.apk /data/superuser" command in root.bat
I've done all the previous steps without problems.
Before executing root.bat I have set again Usb Debug and OEM Unlock, is it correct?
Sometimes I get stuck on "adb remount"
What can I check?
Thanks
Woody
Good morning,
I'm new here, and i hope you can help me with my problem.
I have a mi MJJGYY02FM projector and i did a update with USB stick with files from Xiaomi.
Now after the update the projector start with MI logo and than shuts down, after that he start up with no screen and do nothing.
Can someone help me how to fix this. i can't get the projector in a boot menu with the remote, maybe he dont recognize the remote.
Kind Regards,
Bas
Reflash projector's Stock ROM.
jwoegerbauer said:
Reflash projector's Stock ROM.
Click to expand...
Click to collapse
I have the stock ROM on USB now, but hè will not install it. When i press the home and enter button and plug the power cable. Hè start up with the MI logo and shuts down, then start up with no screen.
Are there other ways to install the stock ROM?
AFAIK the Stock ROM typically gets installed by means of ADB Sideload method:
Code:
adb devices
adb reboot sideload
adb sideload <FULL-PATH-TO-STOCK-ROM-ZIP-FILE-ON-PC-HERE>
jwoegerbauer said:
AFAIK the Stock ROM typically gets installed by means of ADB Sideload method:
Code:
adb devices
adb reboot sideload
adb sideload <FULL-PATH-TO-STOCK-ROM-ZIP-FILE-ON-PC-HERE>
Click to expand...
Click to collapse
Thanks
Im gonna search out and try that option.
I let it know when it works. maybe i have some questions.
jwoegerbauer said:
AFAIK the Stock ROM typically gets installed by means of ADB Sideload method:
Code:
adb devices
adb reboot sideload
adb sideload <FULL-PATH-TO-STOCK-ROM-ZIP-FILE-ON-PC-HERE>
Click to expand...
Click to collapse
Im trying something, but do you have a discription how to make that USB with the Stock Rom?
I got your files on my pc. I have a 16GB USB format FAT32.
What is the way to make that sideload with the ROM version?
Im sorry for the questions, but i have never done this before.
I have done thist thing
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
The USB-stick, once plugged into Windows computer, in Windows OS is recognized as a drive: note down this drive letter returned. Then sequentially run the ADB commands listed above.
jwoegerbauer said:
The USB-stick, once plugged into Windows computer, in Windows OS is recognized as a drive: note down this drive letter returned. Then sequentially run the ADB commands listed above.
Click to expand...
Click to collapse
Must i do the commander when the stock ROM is on the USB?
By what command must i write the letter from the USB?
Vross46 said:
Must i do the commander when the stock ROM is on the USB?
By what command must i write the letter from the USB?
Click to expand...
Click to collapse
My drive letter is :e
Didn't think it can be so difficult.
Assumed the Stock ROM's file is located in root of E: drive then the ADB command in your case becomes
Code:
adb sideload E:\<NAME-OF-STOCK-ROM-ZIP-FILE>
where you have to substitute
<NAME-OF-STOCK-ROM-ZIP-FILE>
by ROM's true file name
jwoegerbauer said:
Didn't think it can be so difficult.
Assumed the Stock ROM's file is located in root of E: drive then the ADB command in your case becomes
Code:
adb sideload E:\<NAME-OF-STOCK-ROM-ZIP-FILE>
where you have to substitute
<NAME-OF-STOCK-ROM-ZIP-FILE>
by ROM's true file name
Click to expand...
Click to collapse
ah ok. lets try.
It seems not so difficult but, for the first time is everything more difficult
What do i wrong. sorry! I do really my best
1, i have a format 16gb usb FAT32
2. i have install ADB installer.
3. i have download the stock rom (see picture)
4. my drive name is e:
5. When i zip my stock rom file, i got an another zip file, and an file of 1kb
in the next picture is what i do in CMD
anglee_full_9.0.0.1911 is my zipped stock rom downloadfile
the other 2 are the unzipped files from the first file
1st screenshot provided above shows
1. Device isn't connected via USB-cable with PC or, if, not powered on
2. The ROM's archive name you entered is without fileextension -> required :ZIP
If ROM's archive is packed as .RAR file then you have it to repack to .ZIP file
I think it will not gonna help.
When i connect my projector to the pc, the pc dont recognize him.
What i try, nothing works.
but thanks for your help anyway
Have you ever enabled "USB Debug" in Android's Settings -> Developer otions?
I dont know if its enabled. But now in can not come in the menu.
MI logo shine for 1 second. And it turns off.
So i have no possibillity to check
Vross46 said:
I dont know if its enabled. But now in can not come in the menu.
MI logo shine for 1 second. And it turns off.
So i have no possibillity to check
Click to expand...
Click to collapse
Hello Vross46, have you been able to solve your problem? I’m stuck with the logo as well