Related
This Method Is The method Used By Me For deodexing Gingerbread XXKPE .I used This Method Because I was Not able to install BusyBox (ie The cp command didn't Work.so I was not able to copy the deodexed files to phone .So That the phone did not boot,stuck at the booting time).
Use This Method If Every Method For Deodexing Fails.
Steps
1.) flash to new XXKPE gingerbread Rom
2.) Root Your Phone
3.) download xUltimate-v2.2.8 xUltimate-v2.2.8
Note: You can use the already deodexed files by downloading this link Download Deodexed System Files [COMPLETE] then Goto step 11
4.) Unzip xUltimate v2.2, and launch "Main.exe"
5.) If everything goes well xUlt should recognize the phone and make a connection. You now should see a list of options.
6.) Run option 1. After option 1 is done, run option 2.
7.) Now these well take a while. Run option 3.
8.) IMPORTANT: After you have run option 3
9.) Now run option 4, and wait.
10.) Exit xUltimate, and put the phone in USB debugging Mode
11.) Download QtADB_0.8.0_windows_with_libs.zip
QtADB_0.8.0_windows_with_libs.zip
12.) Open It QtADB (left side - Browse to the xultimate folder, Right Side System folder)
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
13.) copy all the in the done_app folder to the app folder in the phone side
14.) type odex in the filter textbox (phone side) and you will see all the odex files.select all and delete them
15.) copy all the files in done_frame to framework folder in the phone side
16.) type odex in the filter textbox (phone side) and you will see all the odex files.select all and delete them
17.) Reboot
Note 1: Rebooting Will take some time .its due to the new caching of files
Note 2: If Copying Get Stuck At somewere ,NO PROBLEM just Recopy The files Until all files are copied
Forget deodoxed process, and thank you brother for This explorer for windows, and I searched a lot for something like this but didn't find any application.
Thanks....
Recycled comment.
Sent from my GT-I9003 using Tapatalk
Changed The Thread
Comments Starts From HERE
Recycling Threads
with this no need of busybox right ... good one thanks
kchdeepak said:
with this no need of busybox right ... good one thanks
Click to expand...
Click to collapse
Busy box is needed. But the busybox needed will be 1.16.2 (which will be installed automatically when you Root with SuperOneClick).this busybox version do not contain cp commands.But still you can Deodex
Unrecognized option: -splash:./jar/1.png
i get this error after selecting the 3rd option :-/
bajju123 said:
Unrecognized option: -splash:./jar/1.png
i get this error after selecting the 3rd option :-/
Click to expand...
Click to collapse
If you can't deodex the files the you can use the already deodexed files uploaded by Misledz
Download Deodexed System Files [COMPLETE]
checking....
@vivek... *waiting for phone___*
what to do?
xultimate procedure donr... bt when m going to open QtADB .. it ask for path.. when i place the xultimatum folder path... it repleis "There is no adb binaries here"...
what to do?
Aaditya2 said:
@vivek... *waiting for phone___*
what to do?
Click to expand...
Click to collapse
Flashed & Rooted ???
remove usb cable & connect again in debugging mode ??
Or it may be error in driver files
install kies or update it
Aaditya2 said:
xultimate procedure donr... bt when m going to open QtADB .. it ask for path.. when i place the xultimatum folder path... it repleis "There is no adb binaries here"...
what to do?
Click to expand...
Click to collapse
I think you havent even set up the ADB which is used for develpment & othe management of Android phones
I will provide the link
install the adb and the use Qtadb.exe
How To Set Up ADB/USB Drivers for Android Devices
So most people won’t have to use ADB (Android Debug Bridge) ever, but if you want to learn how or want to get a little more technical with your Android phone, here’s how to get it set up.
I. Setting Up The SDK
1. Download the Latest Android SDK from Google
Android SDK
2. Extract the Android SDK .Zip file to C:\AndroidSDK (this should name the new folder created AndroidSDK in the C directory.
3. On your phone, click Settings > Applications > Development and make sure USB Debugging is on.
4. Plug your phone into your computer via USB cable (it needs to be on). It should say installing drivers if using Windows.
!UPDATE 12.01.09 – If using Windows 7 skip steps 4 and 5 and use this procedure instead.
5. After it installs the drivers, goto the Start menu and type cmd into the search bar (Vista or higher) or click Run then type in cmd (XP) to open the command prompt.
6. Type the following into the command prompt window (hitting enter at the end of every line):
cd\
cd AndroidSDK\tools\
adb devices
browse the C:\AndroidSDK\tools\ as the path whe QtADB asks
up to the 17th step all procedure done succesfully.... bt after rebooting my phone just blinked and stuck on startup screen..... what to do?... reply
Aaditya2 said:
up to the 17th step all procedure done succesfully.... bt after rebooting my phone just blinked and stuck on startup screen..... what to do?... reply
Click to expand...
Click to collapse
samsung galaxy SL screen Or the Boot Screen( Glowing SAMSUNG)??
samsung galaxy SL screen
Aaditya2 said:
samsung galaxy SL screen
Click to expand...
Click to collapse
have you tried the new method for deodexing
the recovery CWM method
try it using the zip file
hmmm... ok... thanx... trying dat one!!!!!!!
Thanks dude. Easy method for deodexing
vivekkalady said:
have you tried the new method for deodexing
the recovery CWM method
try it using the zip file
Click to expand...
Click to collapse
dat also not worked.... i want to deodexing with your method... plz help me....
my phone wont reboot. its boot loop i think. what should i do?
Updated: 09/07/2012
Important: I am not responsible if your device becomes unusable.
Download the ROM instead from here: http://forum.xda-developers.com/showthread.php?t=1738571
Steps to improve Spice MI 270's performance and battery life:
Before installing the apps, make the following changes in settings:
Go to settings>Applications and tick Unknown sources
Step 1: Apply root
Go to z4root and select "permanent root". Restart phone after the root is applied.
Next replace your old recovery mode
First download and install this flash file in to your phone:
http://cyanogen-files.carneeki.net/flash_image.zip
Steps to install:
1. Unzip the file_image file
2. Copy it in the sd card
3. Open root explorer
4. Copy flash_image from sd card
5. Go to /system/bin folder and change the r/w to r/o and Paste it in that folder.
Done!
Download the modded recovery image from here: http://forum.xda-developers.com/showthread.php?t=1620585
And save it in sdcard
Now, go to terminal and type:
$ su
# flash_image recovery /sdcard/
For example:
$ su
# flash_image recovery /sdcard/recovery.img
Lastly update Google Market:
Go to the new custom recovery mode and clear cache
Now your Spice MI 270 is SAFE!
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
MI 270 original recovery and boot file image
Find attached the original recovery and boot file image for MI 270
Why not just use an app called Root Uninstaller.
With that you won't need to do commands in the terminal.
Just open it up and select the apps you want to uninstall.
Sent from my Ainol Novo7 Elf using xda premium
Yes, one can also use root explorer to directly delete apps from system.
Sent from my Spice Mi-270 using XDA
I updated the following default apps from the market:
Google Maps
Youtube
Gmail - it failed to update first. So, i downloaded the apk then updated it on my phone (it "force closed" each time i opened it). Then again i went to Google Play and updated it. Works like a charm now.
Does spice mi270 have wifi hotspot... Or any third party app to activate this...
As of now, the hotspot feature is not available in the default ROM. However, balamu96m is building a custom ROM that will have the feature. So, subscribe to him to be updated of the development.
Sent from my GT-I5801 using XDA
hey irooted my spice mi 270 by z4root n also installed the mobileuncle tool n placed the recovery.img in root of sdcard but still when i try to flash it with using mobileuncle tool then it says "no recovery.img found " so pls help me...n is there any other tool for this?
You can flash the img directly from terminal. First install android terminal emulator on your device. After this download flash file from here - http://wiki.cyanogenmod.com/wiki/Flash_image.
Save it at the specified location. Now type the following:
$ su
# flash_image recovery /sdcard/recovery.img
Or view instructions from here:
http://theunlockr.com/2009/10/15/how-to-flash-a-new-recovery-image-if-you-are-already-rooted/
Sent from my GT-I5801 using XDA
Go to the link below and download the stock system.img file, boot.img and other important files
https://www.dropbox.com/s/g7xrbe9s3nw0kg7/Spice_Mi-270.zip
Custom boot_logo for MI 270
Here is a custom boot logo (2) for MI 270...
Auto start android m- schedule on/ off
Hi,
I found this feature in settings of my Spice MI 270. This is similar to NoMoarPowah. It turns on/ off the phone at a scheduled time so that you can easily use the alarm even when the phone is switch off.
The system.img file is stored here:
http://forum.xda-developers.com/showthread.php?t=1609094
google play force close
when i paste the google play in /system/app it did'nt showed the warning to replace the file . Then i replaced it with vending.apk it installed succesfully. but when i opened it it showed force close . Every time i open it, it says force close. help me in this issue. ialso lost my android market(default one). so please help me fast.Thanks in advance
utkarshmalik211 said:
when i paste the google play in /system/app it did'nt showed the warning to replace the file . Then i replaced it with vending.apk it installed succesfully. but when i opened it it showed force close . Every time i open it, it says force close. help me in this issue. ialso lost my android market(default one). so please help me fast.Thanks in advance
Click to expand...
Click to collapse
did you set permissions to rw-r-r and reboot phone?
try...it should work
nothing happens with this to
I did the thing you said and also tried everything I knew but nothing happens......
can some one upload the system.img with working google play..
Plz read my 2nd and 3rd post. I have already posted the solution for this. All you got to do is update your google play. Try this and let me know. System.img is also posted in this thread.
Sent from my Spice Mi-270 using XDA
The system.img you posted has android market version 3.4.4 and which 2nd and 3rd post you are talking . I can't find any thing related to this issue in them. But I tried every thing i got in this thread . nothing happend every time i get force close. i don't have the stock maket too .please tell sol. faster
1. Have you tried my system.img?
2. Did clear the cache from recovery mode?
3. Did you visit play.Google.com from your pc and tried updating apps?
Sent from my GT-I5801 using XDA
Root explorer is a paid app, providing an illegal apk justifies a ban. Unless you have permissions from the author to post on here (doubtful).
There are many other apps that can perform the tasks you want root explorer to do.
Sent from my GT-I9000 using Tapatalk 2
Yes I did tried your system.img but it had market version 3.4 and also kept on saying invalid imei no. so I had again to migrate to original system.img . And please tell me from where I can update apps from Google play store on PC . I can't find any update icon/button there. sorry for my bad English. And thanks for your attention to me. By the way I got my original market back.
There's a hidden feature in Android 6.0, multi window. It has its warnings:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
So decide if this is actually for you before following these steps
It's not shown in user builds, so we have to do some messing. You'll either need root or a custom recovery to do this, but as not everyone wants root, here's how you do it with TWRP, a USB cable, and a PC with ADB:
1. Boot your device into recovery
2. Mount your system by going to Mounts > Tick System
3. On your PC open a command line, somewhere like your desktop is useful
4. Type the following command:
HTML:
adb pull /system/build.prop
5. Open the build.prop file with your favourite (decent) editor, I recommend using Notepad++ on Windows
6. Find the "ro.build.type" line
7. Change the text after = to "userdebug" from "user"
BONUS: If you want a nicer DPI here, change the line "ro.sf.lcd_density" to your preferred DPI
8. Save the file
9. Go back to the command line and enter the following command:
HTML:
adb push build.prop /system/
10. Now open a shell doing:
HTML:
adb shell
11. Now a adb shell will open, enter these commands:
HTML:
cd system
chmod 644 build.prop
12. Reboot the device as normal
13. When the device has booted, go to the developer options
14. Scroll down to the bottom of the "Drawing" category
15. Enable multi-window and have some fun!
If you're rooted...
1. Download "Build.prop editor"
2. Find "ro.build.type"
3. Edit it to have the value "userdebug" from "user"
4. Reboot when prompted
5. When the device has booted, go to the developer options
6. Scroll down to the bottom of the "Drawing" category
7. Enable multi-window and have some fun!
Worked ! Thanks
Such a shame the Keynote didn't introduce such feature, it's stable enough. Just think of the use of the feature on a 10" tablet.
works perfect thank you !
How do you use it after enabling?
Chahk said:
How do you use it after enabling?
Click to expand...
Click to collapse
Go recent menu, on the apps beside the x there's a button to choose the top half or second half.
Multirom users can go /data/media/multirom/roms/ and edit the build prop directly there, no need to use adb. I did it without using a PC
I flashed the latest hammerhead twrp with fastboot command, it was successful, but when I reboot bootloader and choose recovery, it keeps loads forever and sometimes the screen flashes black. I tried CWM after that, it said root needed. How do you guys got recovery on M?
Chahk said:
How do you use it after enabling?
Click to expand...
Click to collapse
I get how to use it, but how do you consistently pick the two apps that you want to appear?
---------- Post added at 11:28 AM ---------- Previous post was at 11:26 AM ----------
elreydenj said:
I get how to use it, but how do you consistently pick the two apps that you want to appear?
Click to expand...
Click to collapse
It seems to be all over the place. I cant figure out how to always get the two apps that i want in multiwindow to show....
prwnd said:
I flashed the latest hammerhead twrp with fastboot command, it was successful, but when I reboot bootloader and choose recovery, it keeps loads forever and sometimes the screen flashes black. I tried CWM after that, it said root needed. How do you guys got recovery on M?
Click to expand...
Click to collapse
This is the wrong place to ask this question . Check your pm i have given you the solution and please ask your questions in the right thread next time onwards
is it possible to do that with Wugfresh Nexus Root Toolkit?
jonathanxx1 said:
is it possible to do that with Wugfresh Nexus Root Toolkit?
Click to expand...
Click to collapse
Nope. I tried doing the "push/pull files" and it didn't work. You can install custom Recovery with WugFresh then follow these instructions.
drgonzo712 said:
Nope. I tried doing the "push/pull files" and it didn't work. You can install custom Recovery with WugFresh then follow these instructions.
Click to expand...
Click to collapse
I tried also ,,and it doesn't work.
Adr990 said:
I got this message from ADB:
Anything?
Click to expand...
Click to collapse
Open terminal, type
su
cd system
chmod 644 build.prop
exit
and do stages again
Adr990 said:
When I do that, in adb shell:
Click to expand...
Click to collapse
Ow, i forgot ,my mistake sorry can you try this ?
cd system
chmod 777 build.prop
exit
damn.. is there a way to do it if it is a secondary rom on multiboot?
Adr990 said:
Oh and I also tried this:
Kinda wierd how it is not working for some, while we all flashed according to Google's adb flashing method.
Click to expand...
Click to collapse
Can you send your build.prop to me via pm. I can make a flashable zip for you
Hello people, I have multirom installed on my nexus 5, the primary rom is 5.1.1 (LMY48B), and my secondary rom is the developer preview MPZ44Q. I want to know if it's possible to enable multi-window mode since the M preview is installed as secondary rom.
I did it. Reboot into recovery. Swap the Roms. Don't reboot . reboot into recovery again from the reboot tab. Select multiboot tab just to ensure you are OK and the M ROM is the internal.. Mount system and do what the op says. Reboot into recovery again swap Roms again . reboot system and you should be OK. Takes like a half an hour to do though
PS. NEVER FIX SU. ALWAYS SKIP
I understood that if i try to install su on the M rom, it will result in bootloop. And my internal rom is stock ROOTED. So do you think it will work ?
When i will swap the roms, the fact that my primary rom is rooted, will it cause any problem ? Thanks in advance.
Nope my primary is still rooted. And I an typing this from my secondary M ROM with multi window enabled. All you have to do is never fix su for either ROM and never boot the system with M as your primary ROM and you are ok
Help me too
hsay said:
This is the wrong place to ask this question . Check your pm i have given you the solution and please ask your questions in the right thread next time onwards
Click to expand...
Click to collapse
This is the worst thing to do here but could u please guide me too to the recovery as i searched all i could but still got no answer. Even the Guys in the Discussion group had no answer. Please Help ME,.
Hi friends, I managed to get root on my phone and now I'm showing how it was done.
Installation is done through Flash tools.
Flash tools e drivers (download link) :
https://mega.nz/#!ZkUlFAhK!Cl1EfNvbXHw_Cpa_ql3qfZie7lrTYMUU1jWMrpBHr_8
Recovery TWRP (download link) :
Author: http://www.needrom.com/author/megthebest/
https://mega.nz/#!FkVW1TbZ!2wxk5dvX7a2-tm7o7RlFFEiAeD-8Y35NuH0G9CKwr8g
Instructions:
1. Install flash tools and drivers.
2. Unzip all files.
3. Open flash tools.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
4. Clicking on one and seek our Scatter file folder recovery
5. We will list, but only marked out the recovery
6. Press 2 Download
7. Once pressed connect the terminal to the pc "OFF"
8. The load is very fast and we will start an OK once completed
9. Disconnect the phone and reboot.
To check if everything went well, do the following.
1. We turn off the phone
2. Once off, press volume + button without releasing also tighten our of power, no hope to drop out Bluboo poster and release within two seconds.
3. If all went well, our recovery will appear.
[/IMG]
[/IMG]
Root
To root our terminal download the following file and put it in the phone memory as it is in .zip format.
SUPER SU ZIP
https://mega.nz/#!IhdS3AKD!QLCVBjglr73FmzPZU9Gec4pK3BTdTcKdnafKwS1evVA
1. Enter in recovery.
2. Install zip.
3. Reboot mobile phone.
4. Enjoy root
Credits: MdsTeam
Hi, is twrp the same as this?
http://www.needrom.com/download/twrp-2-8-7-1-for-xtouch/
Only hosted in a mirror link mega? Because if yes, please mention me as the author.
Thanks
Yes, megthebest. You is author. Thank you.
I have this mobile. He is very good. I instal antutu by play store, he is scored 47700.
Confused
Hello,
I am confused on this part of the steps:
6. Press 2 Download
7. Once pressed connect the terminal to the pc "OFF"
I press download, on the step 7. does that mean connect the USB cable from the PC to the phone? What does it mean by "OFF"?
After I press Download and have the USB cable plugged into the phone with the phone on and unlocked nothing happens Please help!
(USB Debugging enabled, device is listed in adb devices, and I can access storage and SD card)
Install any drivers, okay?
Select only the recovery in flashtools. Tighten download. Then connect the phone off the usb. The flash will install the recovery. Then see if the recovery has been successfully installed. And install the root by recovery.
Drivers installed ok. I selected only recovery in flashtools, and clicked download, and then plugged in USB.
Should I use USB debugging?
Should I use "USB Storage" or "Media device (MTP)" or "Camera (PTP)"?
Thank you!
tiagoaugustobr said:
Install any drivers, okay?
Select only the recovery in flashtools. Tighten download. Then connect the phone off the usb. The flash will install the recovery. Then see if the recovery has been successfully installed. And install the root by recovery.
Click to expand...
Click to collapse
Got it!
I figured it out
Here's the steps I did:
1. Install ADB from here rubenalamina.mx/download/525/
2. Install drivers provided in the original post here.
3. Reboot PC.
4. Open command prompt with administrator privileges, and type: cd c:\adb
5. Then type: adb devices
6. Open flashtool provided in the original post here.
7. Select scatter file as described in the post here, and clicked download.
8. While flash tool is running the "download", plug in phone with USB cable and restart the phone and it will work, with an OK window at the end like described in the original post here.
9. Unplug the USB cable, reboot phone and hold volume up key as described in original post.
10. Install SuperSU as described in the original post here.
DONE!
Anyone try this successfully?
Thanks for the guide.
It worked for me smoothly, many thanks!
Connect your phone off via USB, after pressing download mode.
question
i have a small question.
if i do this will this wipe all my data?
(i am a beginner to rooting)
pietertjes said:
i have a small question.
if i do this will this wipe all my data?
(i am a beginner to rooting)
Click to expand...
Click to collapse
Nope, no impact on data.
Actually you don't see a difference except that root apps ask for permission (SuperSU pops up)
Btw: I just installed supersu via recovery, not busybox as described sometimes.
Sucessfully did it just yesterday.
Bluboo Xtouch doesn`t turn on after trying root
Hi,
After I've tried to root nothing happened on the flashing tool, so I've tried pressing volume up + power button and my pc just did a sound of plugin a cable and nothing happened in my phone, so I've tried to turn my phone on and it didn't work. I've tried pressing a lot of combinations trying to turn it on with no success. Can someone help me? I don't know what to do anymore since my battery is no removable.
Don't work
I try to flash TWRP and to root but after pressing download button and connect phone, nothing happen.
(adb drivers are OK).
Edit : Procedure available with last rom (Jan 12th 2016) ?
Some help ?
/system/xbin/su how to remove this
Hi
I'm trying to install a enterprise app but during the install I got a "policy violation", because my device is considered rooted, since under /system/xbin there is a "su" file.
I already did a upgrade to last version from (room) Jan 12th 2016, but the /system/xbin/su persists... I think this is because it is a maufacturer built room from Bluboo but the true is I'm unbale to install the enterprise app. I already try to delete / rename/ move the su file, but I don't have permissions...
I don't want to root the device.... maybe install an official "android 5.1" but I'm afraid to do it, and I don't know how to do it...
so anybody have a suggestion how to fix this issue ?
Many thanks
Bluboo Xtouch doesn`t turn on after trying root too , please a litle help
Hi,
After I've tried to root nothing happened on the flashing tool, so I've tried pressing volume up + power button and my pc just did a sound of plugin a cable and nothing happened in my phone, so I've tried to turn my phone on and it didn't work. I've tried pressing a lot of combinations trying to turn it on with no success. Can someone help me? I don't know what to do anymore since my battery is no removable. and when i plugin the usb cable the pc reconize by a beep
TWRP is working very good for me, super su binary installed without any complications, root is working good, many thanks to you Megthebest for TWRP for Bluboo Xtouch!!
Edit:
Megthebest, I have question, I found on your profile the new twrp version 3.0.0:
http :/ /ww w.needrom. com/download /twrp-3-0-0-m egthebest-3/
Will this work with Bluboo Xtouch?
arnon85 said:
TWRP is working very good for me, super su binary installed without any complications, root is working good, many thanks to you Megthebest for TWRP for Bluboo Xtouch!!
Edit:
Megthebest, I have question, I found on your profile the new twrp version 3.0.0:
http :/ /ww w.needrom. com/download /twrp-3-0-0-m egthebest-3/
Will this work with Bluboo Xtouch?
Click to expand...
Click to collapse
hi, no, TWRP 3.0.0.0 linked doesn0t work on Bluboo Xtouch.
I don't have Xtouch, so i think that i won't try to make TWRP 3.0.0.0 without the possibility to debug it directly on the smartphone
cheers
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Tutorials and the tools are not my work, so I don't take any credit. However, the tutorial is come from China. I combine my experience and translate them as much as I can to english.
Instructions:
First, download the root files (at the bottom of this post) accroding to your tablet model (at the back of your tablet) and install the driver in the computer.
Please install in the following order:
1) iSocUSB-Driver-Setup-1.2.0.exe
2) IntelAndroidDrvSetup1.5.0.exe
3) PhoneFlashTool_5.3.4.0_win32.exe
Pay attention to the following points
a) you must install those driver in the above order
b) Don't change the install location of those driver
c) Close your antivirus software to avoid unknow problem
Then, go to Settings>Developer Options>USB Debugging. Enable OEM Unlock and enable USB Debugging Mode
Now, connect your X80 Plus to the computer,
Open a Command Prompt window in "Root X80 Plus H6C3" folder (To open a Command Prompt window in any folder, hold down the shift key and right-click on the folder) and enter the following command
Code:
adb reboot bootloader
Press Enter
Wait for the device to enter fastboot mode
Code:
fastboot oem unlock
Press Enter to unlock the oem and enter the following command
Code:
fastboot flash boot boot.img
Press enter to flash the kernal, then enter the following command
Code:
fastboot reboot
This command will restart your tablet.
It is normal that tablet reboot 3 to 4 times automatically, just wait for it. (turn on the tablet yourself if the tablet do not reboot automatically)
After your device is on, check that Wifi and bluetooth works or not. (Wifi and Bluetooth may not works with the replaced kernal, just perform a factory reset)
If everything is ok, enter the following command
Code:
root.bat
Wait for the Command Prompt until it stuck at this command, "adb shell su --daemon"
Now, disconnect the tablet and reboot it manuly
After the device was booted up, Supersu already become a part of system app.
Open Supersu now, it will notify that the SU binary needs to be updated. You must need to install the binary once, but you will fail at 100%(unless there is a miracle, and your tablet is root successfully, congratulations)
Close Supersu and reconnect the tablet, enter the following command again.
Code:
root.bat
Now the command prompt should run all of the command smoothly and Supersu should have no message about the SU binary update !!
Therefore, if your Supersu shows nothing (works properly), your tablet is rooted, thats amazing.
If Supersu keep notifing, please enter the following command again and wait for it to boot up automatically until Supersu have no message about the binary update.
Code:
root.bat
Note that this root method are not stable yet
Known issues:
1) Old version of Titanium Backup was unable to execute the SU command
2) LBE are not 100% compatible with this root
Post reply if you have any requires or problem.
Stock Rom for X80 Plus just in case you need them, and the instruction will be translated later
H6C3 and H5C5
Root files: H6C3 and H5C5
Sorry for my bad english
Hi and thanks for sharing.
Is there a custom recovery to install?
I would like to install xposed framework, but don't know how to install the zip file...
Thanks
thanks and your thread on teclast's forum where the link was crash, please repair.
Thanks a lot
Can someone confim that this method works?
Jeconxis said:
thanks and your thread on teclast's forum where the link was crash, please repair.
Click to expand...
Click to collapse
You can try to flash xposed using flashify!
woody4165 said:
Hi and thanks for sharing.
Is there a custom recovery to install?
I would like to install xposed framework, but don't know how to install the zip file...
Thanks
Click to expand...
Click to collapse
Working hard on it now
hahaha1111 said:
Working hard on it now
Click to expand...
Click to collapse
looking forward to this!
Thaaanks a lot @hahaha1111 !!! I tried that on my all new H6C4 received this morning with your H6C3 files and anything is working perfectly !!! Many thanks again !!!
BTW: Any way to update SuperSU binary then?
I tried your method on my H5C6 and it worked beautifully. Thank you!
where can I use the file?
I download the file named X80 plus-win10_20160108.7z from the link. what is this, and where can I use it?
hahaha1111 said:
Working hard on it now
Click to expand...
Click to collapse
Hi @hahaha1111
any news on custom recovery?
I would like to install xposed framework, but cannot be done without custom recovery, is it correct?
Thanks
woody4165 said:
Hi @hahaha1111
any news on custom recovery?
I would like to install xposed framework, but cannot be done without custom recovery, is it correct?
Thanks
Click to expand...
Click to collapse
Hiatus
H6C4
Great! It works perfectly on H6C4.
Thanks!
Regards
RoroTiti said:
Thaaanks a lot @hahaha1111 !!! I tried that on my all new H6C4 received this morning with your H6C3 files and anything is working perfectly !!! Many thanks again !!!
BTW: Any way to update SuperSU binary then?
Click to expand...
Click to collapse
It's updated from play market with no problem.
May be it is my particular problem ( kernel 3.14.37 firmware assembly ver 3.03.20161109) but.....
WARNING TO H6C4 OWNERS! SD Card becomes unusable with this rooting files. Any SD Card after rooting recognized as 0,9 Mb size and you can't access files on it. You can't use SD Card reader too.
Please report if you do not encounter this issue.
Hi.
I'm stuck on "adb push SUfiles/Superuser.apk /data/superuser" command in root.bat
I've done all the previous steps without problems.
Before executing root.bat I have set again Usb Debug and OEM Unlock, is it correct?
Sometimes I get stuck on "adb remount"
What can I check?
Thanks
Woody