I just link the thread here for your convenience.
+ Download BeatsAudio6.27.zip and copy to your SD card
+ Make a Nandroid backup
+ Wipe cache partition and wipe dalvik cache
+ Install BeatsAudio6.27.zip
+ Reboot
+ First boot will take around 5 minutes. Be patient.
http://forum.xda-developers.com/showthread.php?t=1525226
Related
hi
SOLVEDsorry for my bad english
i have rooted my phone and installed cwm and so installed GingerDX 25 by this Structures :
Code:
wipe data/factory reset
wipe cache partition
advanced > wipe dalvik cache
mount and storage > format system
instal zip from sd card
reboot
then the rom fully loaded (after about 5 minutes) and after a while working on it i pressed the power button and selected "reboot to cwm" and followed this structures to reinstall that file (GingerDX 25) again by this new structures :
Code:
wipe data/factory reset
wipe cache partition
advanced > wipe dalvik cache
[COLOR="Red"]advanced > wipe battery status[/COLOR]
mount and storage > format system
instal zip from sd card
reboot
but after reboot i waited about 20 minutes but the phone is freezed on first "sony ericsson" (text logo) and now i cant load cwm with touching screen or clicking back button repeatly to restore my backup
i forced to pull out the battery
the bootloader isnt breaked
what should i do now ?
try help
tempfordroid said:
hi
SOLVEDsorry for my bad english
i have rooted my phone and installed cwm and so installed GingerDX 25 by this Structures :
Code:
wipe data/factory reset
wipe cache partition
advanced > wipe dalvik cache
mount and storage > format system
instal zip from sd card
reboot
then the rom fully loaded (after about 5 minutes) and after a while working on it i pressed the power button and selected "reboot to cwm" and followed this structures to reinstall that file (GingerDX 25) again by this new structures :
Code:
wipe data/factory reset
wipe cache partition
advanced > wipe dalvik cache
[COLOR="Red"]advanced > wipe battery status[/COLOR]
mount and storage > format system
instal zip from sd card
reboot
but after reboot i waited about 20 minutes but the phone is freezed on first "sony ericsson" (text logo) and now i cant load cwm with touching screen or clicking back button repeatly to restore my backup
i forced to pull out the battery
the bootloader isnt breaked
what should i do now ?
Click to expand...
Click to collapse
stock kernel or naA / alfs kernel
or corrupt file / scandisk memory before copy file
or re download file
Hi ! I want to install BioHazard,but after installation i've got loopback.I try to install it through ClockworkMod Touch 6.0.1.2. Also i do wipe data/factory reset,wipe cache partition,wipe dalvic cache anf fromat data system cache.I don't install Gapps.What should i do to install it without loopback.Now i'm on Gigabread
OK, you first of all don't panic !!!
Now, first of all flash TWRP recovery - http://forum.xda-developers.com/showthread.php?t=1694617 from CWM by putting it into SD card and then flashing it.
Now, simply download the Bio Hazard ROM from http://forum.xda-developers.com/showthread.php?t=1917906 , and again put it in SD card.
Now, download Gaaps for your mobile from this URL - http://goo.im/gapps/gapps-ics-20120429-signed.zip
Now, boot into recovery, and then go to Wipe Menu, there wipe system, data ( factory reset ) and all the cache.
Now, go to install menu, and there choose Bio Hazard ROM file that you downloaded into your SD card.
Flash it.
Now, flash Gapps that was in your SD card.
Now simply reboot your mobile !!!
All done your mobile should be working !
Hope I helped you ! :fingers-crossed:
:highfive:
And pls hit the thanks button if I helped you !
hello, go to recovery with the buttons and make conbinazione wipe Dalvik cache and then install the gapps, wipe cache and wipe Dalvik cache and reboot your device ...
plz help...i was complted installation biftor v4.7 ..when the first bootup it stck on samsung log...help plzzzzzzzzzzzzzz..wht i can do..also wipe data by given biftor super scrip..wht can i do..anyone help
First install v4.0 and then flash v4.7
To install v4,0 and then v4.7 read the opening post.
Steps:
Goto recovery
Backup the existing ROM (Just In case). Also backup the /efs folder (just in case)
wipe dalvik cache (in advanced)
wipe cache
wipe data
format /system (optional - read below)
install the superwipe
install the 4.0
wipe cache
wipe dalvik cache
reboot.. till the rom boots..
Then Flash v4.0
then turn off (no need to complete the setup procedure - you can do this after installing v4.7)
install the 4.7
instal the market zip
wipe cache
wipe dalvik cache
fix permissions
then reboot!
I usually also do a format /system to ensure a clean install. Prevents some force closes later
Please verify the md5 of the files you downloaded to ensure they are not corrupted.
v4.0 (MD5): 990bf3ddb2a3a1374995d1ff5946bf9c
v4.7 (MD5): eb934715f441bd5ce6d747493ca91a38
I also installed v4.7 yesterday. Worked great! No issues so far
anshad666 said:
plz help...i was complted installation biftor v4.7 ..when the first bootup it stck on samsung log...help plzzzzzzzzzzzzzz..wht i can do..also wipe data by given biftor super scrip..wht can i do..anyone help
Click to expand...
Click to collapse
ritz28 said:
First install v4.0 and then flash v4.7
To install v4,0 and then v4.7 read the opening post.
Steps:
Goto recovery
Backup the existing ROM (Just In case). Also backup the /efs folder (just in case)
wipe dalvik cache (in advanced)
wipe cache
wipe data
format /system (optional - read below)
install the superwipe
install the 4.0
wipe cache
wipe dalvik cache
reboot.. till the rom boots..
Then Flash v4.0
then turn off (no need to complete the setup procedure - you can do this after installing v4.7)
install the 4.7
instal the market zip
wipe cache
wipe dalvik cache
fix permissions
then reboot!
I usually also do a format /system to ensure a clean install. Prevents some force closes later
Please verify the md5 of the files you downloaded to ensure they are not corrupted.
v4.0 (MD5): 990bf3ddb2a3a1374995d1ff5946bf9c
v4.7 (MD5): eb934715f441bd5ce6d747493ca91a38
I also installed v4.7 yesterday. Worked great! No issues so far
Click to expand...
Click to collapse
ya its workd....
thanx alotzzzz
ritz28 said:
First install v4.0 and then flash v4.7
To install v4,0 and then v4.7 read the opening post.
Steps:
Goto recovery
Backup the existing ROM (Just In case). Also backup the /efs folder (just in case)
wipe dalvik cache (in advanced)
wipe cache
wipe data
format /system (optional - read below)
install the superwipe
install the 4.0
wipe cache
wipe dalvik cache
reboot.. till the rom boots..
Then Flash v4.0
then turn off (no need to complete the setup procedure - you can do this after installing v4.7)
install the 4.7
instal the market zip
wipe cache
wipe dalvik cache
fix permissions
then reboot!
I usually also do a format /system to ensure a clean install. Prevents some force closes later
Please verify the md5 of the files you downloaded to ensure they are not corrupted.
v4.0 (MD5): 990bf3ddb2a3a1374995d1ff5946bf9c
v4.7 (MD5): eb934715f441bd5ce6d747493ca91a38
I also installed v4.7 yesterday. Worked great! No issues so far
Click to expand...
Click to collapse
There's nothing left to be explained ....
You covered it all.....great job:thumbup:
@op pls press thanks for the guy who helped you... it also avoids posts saying just thanks...
Peace
Sent from my Xperia Neo V using Tapatalk 2
HI!
I have two quesstions. I downloaded Xperia Ultimate HD 3.1 (Beta). I found two guides to install it, but I don't know which i can should use.
I have Xperia Arc S with LOCKED bootloader.
First: http://forum.xda-developers.com/showthread.php?t=1955248
There are some steps, which are skip in "official" guide in UHD thread.
For example: according to Tesla's guide I should:
1. Wipe data/factory reset
2. wipe cache partition
3. go to mounts and storage menu
4. format /system
5. format /data
6. format /cache
7. go back to main menu
8. go to advance menu
9. wipe dalvik cache
10. wipe battery stats
11. go back to main menu
12. choose install zip from sd card and then choose xperia_ultimate_hd_2.0.zip file or xperia ultimate hd 2.0.2.zip
13. After Complete Installation untick "reboot" <-- (NOT reboot device) and press reboot in CWM
14. you are now back in cwm, choose reboot
15. Now your phone should start up after some minutes and you can enjoy your Arc with Ultimate HD™ ROM 2.0
But according to "official" guide I should only:
For Unlocked Bootloaders: Flash any Kernel for stock ICS.
For Locked Bootloaders: Root your phone using this tutorial, than install CWM using this app
Place ROM on SD-Card
Back up user apps and data. (Various apps available, search Google Play. This is a popular one)
Power off phone.
Boot to CWM (Keep pressing the Volume Down key after the Sony logo appears)
Wipe Data/Factory Reset
Mounts and Storage --> Format /System
Advanced > Wipe Battery Stats
Install zip from SD card > Choose Xperia Ultimate HD
Follow on screen instructions on AROMA.
After Complete Installation untick "reboot" and select reboot in CWM
Give the phone a good full charge, and enjoy your brand new phone!
As you cas see in "official" guide aren't steps like: format /cache, wipe dalvik cache, format /data, format /cache.
So, which guide I must use to avoid bootloop? And, can I use Eroot to root my Xperia?
Soooorry for my awful English
pawel4427 said:
HI!
I have two quesstions. I downloaded Xperia Ultimate HD 3.1 (Beta). I found two guides to install it, but I don't know which i can should use.
I have Xperia Arc S with LOCKED bootloader.
First: http://forum.xda-developers.com/showthread.php?t=1955248
There are some steps, which are skip in "official" guide in UHD thread.
For example: according to Tesla's guide I should:
1. Wipe data/factory reset
2. wipe cache partition
3. go to mounts and storage menu
4. format /system
5. format /data
6. format /cache
7. go back to main menu
8. go to advance menu
9. wipe dalvik cache
10. wipe battery stats
11. go back to main menu
12. choose install zip from sd card and then choose xperia_ultimate_hd_2.0.zip file or xperia ultimate hd 2.0.2.zip
13. After Complete Installation untick "reboot" <-- (NOT reboot device) and press reboot in CWM
14. you are now back in cwm, choose reboot
15. Now your phone should start up after some minutes and you can enjoy your Arc with Ultimate HD™ ROM 2.0
But according to "official" guide I should only:
For Unlocked Bootloaders: Flash any Kernel for stock ICS.
For Locked Bootloaders: Root your phone using this tutorial, than install CWM using this app
Place ROM on SD-Card
Back up user apps and data. (Various apps available, search Google Play. This is a popular one)
Power off phone.
Boot to CWM (Keep pressing the Volume Down key after the Sony logo appears)
Wipe Data/Factory Reset
Mounts and Storage --> Format /System
Advanced > Wipe Battery Stats
Install zip from SD card > Choose Xperia Ultimate HD
Follow on screen instructions on AROMA.
After Complete Installation untick "reboot" and select reboot in CWM
Give the phone a good full charge, and enjoy your brand new phone!
As you cas see in "official" guide aren't steps like: format /cache, wipe dalvik cache, format /data, format /cache.
So, which guide I must use to avoid bootloop? And, can I use Eroot to root my Xperia?
Soooorry for my awful English
Click to expand...
Click to collapse
BETTER use the official one given in the thread, because it is the instruction GIVEN by the devs.
and about the Eroot, yes you can use it look here http://forum.xda-developers.com/showthread.php?t=2219711
Sorry this is my first post.
I tried to share my experiences.
When I try to install XDuosV3 1.5 for GT-S6102.
by following these steps from http://forum.xda-developers.com/showthread.php?t=2118569
Download XDV3_ROM_1.5_PR
Download ClockWorkMod
Put them in the root of your SD Card ROOT just not a Folder
Switch off your phone
Go to Recovery mode by pressing Volume up + Home + Power Button
Use the volume keys to scroll Up and Down
wipe DATA
wipe CACHE
Choose Apply update from SD card
Choose CWM -> you will boot into CWM Recovery roomates a yellow colored text
Wipe DATA and CACHE via CWM again
Go to Advance
Wipe Dalvik Cache
Wipe Battery Stats
Go to Mount and Storage
format Cache
Data format
format System
Mounting System / Data and Cache
Press Back Button
Choose Install Zip From SDCard
Choose zip from sdcard
THEN Select -> XDV3_ROM_1.5_PR
Choose "yes" ....
Wait for the installation to be finished
After that Reboot Cell Phone (do not do it)
After, Wait for installation to be finished
Wipe DATA and CACHE via CWM again
After that Reboot your Phone
sorry if I'm wrong.