plz help...i was complted installation biftor v4.7 ..when the first bootup it stck on samsung log...help plzzzzzzzzzzzzzz..wht i can do..also wipe data by given biftor super scrip..wht can i do..anyone help
First install v4.0 and then flash v4.7
To install v4,0 and then v4.7 read the opening post.
Steps:
Goto recovery
Backup the existing ROM (Just In case). Also backup the /efs folder (just in case)
wipe dalvik cache (in advanced)
wipe cache
wipe data
format /system (optional - read below)
install the superwipe
install the 4.0
wipe cache
wipe dalvik cache
reboot.. till the rom boots..
Then Flash v4.0
then turn off (no need to complete the setup procedure - you can do this after installing v4.7)
install the 4.7
instal the market zip
wipe cache
wipe dalvik cache
fix permissions
then reboot!
I usually also do a format /system to ensure a clean install. Prevents some force closes later
Please verify the md5 of the files you downloaded to ensure they are not corrupted.
v4.0 (MD5): 990bf3ddb2a3a1374995d1ff5946bf9c
v4.7 (MD5): eb934715f441bd5ce6d747493ca91a38
I also installed v4.7 yesterday. Worked great! No issues so far
anshad666 said:
plz help...i was complted installation biftor v4.7 ..when the first bootup it stck on samsung log...help plzzzzzzzzzzzzzz..wht i can do..also wipe data by given biftor super scrip..wht can i do..anyone help
Click to expand...
Click to collapse
ritz28 said:
First install v4.0 and then flash v4.7
To install v4,0 and then v4.7 read the opening post.
Steps:
Goto recovery
Backup the existing ROM (Just In case). Also backup the /efs folder (just in case)
wipe dalvik cache (in advanced)
wipe cache
wipe data
format /system (optional - read below)
install the superwipe
install the 4.0
wipe cache
wipe dalvik cache
reboot.. till the rom boots..
Then Flash v4.0
then turn off (no need to complete the setup procedure - you can do this after installing v4.7)
install the 4.7
instal the market zip
wipe cache
wipe dalvik cache
fix permissions
then reboot!
I usually also do a format /system to ensure a clean install. Prevents some force closes later
Please verify the md5 of the files you downloaded to ensure they are not corrupted.
v4.0 (MD5): 990bf3ddb2a3a1374995d1ff5946bf9c
v4.7 (MD5): eb934715f441bd5ce6d747493ca91a38
I also installed v4.7 yesterday. Worked great! No issues so far
Click to expand...
Click to collapse
ya its workd....
thanx alotzzzz
ritz28 said:
First install v4.0 and then flash v4.7
To install v4,0 and then v4.7 read the opening post.
Steps:
Goto recovery
Backup the existing ROM (Just In case). Also backup the /efs folder (just in case)
wipe dalvik cache (in advanced)
wipe cache
wipe data
format /system (optional - read below)
install the superwipe
install the 4.0
wipe cache
wipe dalvik cache
reboot.. till the rom boots..
Then Flash v4.0
then turn off (no need to complete the setup procedure - you can do this after installing v4.7)
install the 4.7
instal the market zip
wipe cache
wipe dalvik cache
fix permissions
then reboot!
I usually also do a format /system to ensure a clean install. Prevents some force closes later
Please verify the md5 of the files you downloaded to ensure they are not corrupted.
v4.0 (MD5): 990bf3ddb2a3a1374995d1ff5946bf9c
v4.7 (MD5): eb934715f441bd5ce6d747493ca91a38
I also installed v4.7 yesterday. Worked great! No issues so far
Click to expand...
Click to collapse
There's nothing left to be explained ....
You covered it all.....great job:thumbup:
@op pls press thanks for the guy who helped you... it also avoids posts saying just thanks...
Peace
Sent from my Xperia Neo V using Tapatalk 2
Related
I'm currently on cm9 a10 and the games are very lag... I want to downgrade back to cm7/ GB, just wanna ask if the steps are right.
1. Reboot into recovery
2. Do a nandroid backup
3. Wipe Cache,data and dalvik cache
4. Flash cm7.zip
5. Reboot recovery
6. Wipe Cache,data and dalvik cache (just in case)
7. Flash cm7.zip again ( i heard without this step, there will be sync problems)
8. Flash gapps
9. Restore data only
10. Reboot
Right??
Sorry for this kind of questions, still a newbie to android
chung1213 said:
I'm currently on cm9 a10 and the games are very lag... I want to downgrade back to cm7/ GB, just wanna ask if the steps are right.
1. Reboot into recovery
2. Do a nandroid backup
3. Wipe Cache,data and dalvik cache
4. Flash cm7.zip
5. Reboot recovery
6. Wipe Cache,data and dalvik cache (just in case)
7. Flash cm7.zip again ( i heard without this step, there will be sync problems)
8. Flash gapps
9. Restore data only
10. Reboot
Right??
Sorry for this kind of questions, still a newbie to android
Click to expand...
Click to collapse
I haven't done this myself. But did move from CM9 to stock gb ddlf2.
I think you'll need to flash xxkpe along with repartitioning to go back to gb/cm7 from cm9.
Make sure you read more before moving further.
hey i am new but have installed many roms on my device.But i am not being able to install cm10 on my neo v. The instructions given in the rom post are not helping me.When i try to install the zip it says installation aborted and some message regarding LT18i and LT15a. Also the zip contains the kernel file so do i need to delete it from the zip file before installing the rom .Please help.
The thread for cm10 http://forum.xda-developers.com/showthread.php?t=1780329
you have to flash kernel first which is in the cm10 folder (boot.img) and after that go to cwm and do factory reset and clear cache and then install or flash the zip of cm10 from sd card
usman_fareed said:
you have to flash kernel first which is in the cm10 folder (boot.img) and after that go to cwm and do factory reset and clear cache and then install or flash the zip of cm10 from sd card
Click to expand...
Click to collapse
thanks i got it done finally.
yogesh19921 said:
hey i am new but have installed many roms on my device.But i am not being able to install cm10 on my neo v. The instructions given in the rom post are not helping me.When i try to install the zip it says installation aborted and some message regarding LT18i and LT15a. Also the zip contains the kernel file so do i need to delete it from the zip file before installing the rom .Please help.
The thread for cm10 http://forum.xda-developers.com/showthread.php?t=1780329
Click to expand...
Click to collapse
*important required baseb and kernel as per rom post
here are step by step methods
1.Go to recovery,then wipe data/factory reset
2.Then wipe cahe partition
3.go to advanced and wipe dalvik and battery stats.
4.then go to mount nd storage do format systm nd sd-ext
now install zip and after installation complete, do above step 2.again
and reboot system now enjoy
Explain
Can you guys explain more? I'm confused
Flash kernel in the zip
Mostly name is boot.img
Flash it using fastboot mode
Then do complete wipe in Cwm ie.
Factory reset
Wipe cache
Wipe Dalvik cache
Format system
Format cache
Format data
Install zip -ie Rom zip!
Done!
Sent from my MT11i using xda premium
I've been using 4EXT Touch Recovery to wipe/format before flashing certain roms. Is there a right way on how to wipe/format using 4EXT Touch?
This is how I do it (correct me if I'm wrong):
1. wipe date/factory reset
2. wipe cache
3. wipe cache + dalvik
4. wipe dalvik cache
5. wipe battery stats
6. format system
7. format data
8. format boot
9. format all partitions (except sdcard)
10. format sdcard
11. flash rom
wh0d0es said:
I've been using 4EXT Touch Recovery to wipe/format before flashing certain roms. Is there a right way on how to wipe/format using 4EXT Touch?
This is how I do it (correct me if I'm wrong):
Click to expand...
Click to collapse
If you are flashing an update of the same ROM do "wipe dalvik cache + cache" (in case the Developer has not clearly stated that the update requires full wipe)
If you are flashing a new ROM use "wipe all partition (except sdcard)" it will do all the wipes from the wipe menu, no need to repeat it
And wiping the sdcard every time you install a ROM clearly does not make any sense, you are deleting all you pictures, music and all other files that are not related to any ROM you are using
amidabuddha said:
If you are flashing an update of the same ROM do "wipe dalvik cache + cache" (in case the Developer has not clearly stated that the update requires full wipe)
If you are flashing a new ROM use "wipe all partition (except sdcard)" it will do all the wipes from the wipe menu, no need to repeat it
And wiping the sdcard every time you install a ROM clearly does not make any sense, you are deleting all you pictures, music and all other files that are not related to any ROM you are using
Click to expand...
Click to collapse
I didn't know that "format all partition (except sdcard)" is the same from 1 to 8. I'll try using it from now on every time I install new roms. Also, I thought that wiping my sdcard every time I install rom is to make that rom fully utilized/functional. And that is why I back up all my pictures, music, and all other files in my laptop. Anyhow, thank you for your simple but very relevant response.
There are some ROM specific files on the SDcard but a full wipe (all partitions except sdcard) clears them too
Sent from my HTC Desire S
amidabuddha said:
There are some ROM specific files on the SDcard but a full wipe (all partitions except sdcard) clears them too
Sent from my HTC Desire S
Click to expand...
Click to collapse
This is noted... Thank you for all the info's... Greatly appreciated! :highfive:
Hi ! I want to install BioHazard,but after installation i've got loopback.I try to install it through ClockworkMod Touch 6.0.1.2. Also i do wipe data/factory reset,wipe cache partition,wipe dalvic cache anf fromat data system cache.I don't install Gapps.What should i do to install it without loopback.Now i'm on Gigabread
OK, you first of all don't panic !!!
Now, first of all flash TWRP recovery - http://forum.xda-developers.com/showthread.php?t=1694617 from CWM by putting it into SD card and then flashing it.
Now, simply download the Bio Hazard ROM from http://forum.xda-developers.com/showthread.php?t=1917906 , and again put it in SD card.
Now, download Gaaps for your mobile from this URL - http://goo.im/gapps/gapps-ics-20120429-signed.zip
Now, boot into recovery, and then go to Wipe Menu, there wipe system, data ( factory reset ) and all the cache.
Now, go to install menu, and there choose Bio Hazard ROM file that you downloaded into your SD card.
Flash it.
Now, flash Gapps that was in your SD card.
Now simply reboot your mobile !!!
All done your mobile should be working !
Hope I helped you ! :fingers-crossed:
:highfive:
And pls hit the thanks button if I helped you !
hello, go to recovery with the buttons and make conbinazione wipe Dalvik cache and then install the gapps, wipe cache and wipe Dalvik cache and reboot your device ...
Hey guys!
I'm currently running latest version of CrDroid ROM and latest version of Gapps. Unfortunately, for whatever reason some apps on it just like to crash repeatedly (main culprit is Snapchat and Google Contact Sync). I was told I should do a clean flash of my Gapps then reinstall it and it should fix it but I think all I've been doing is a dirty flash of it...? All I've been doing is going to TWRP > Wipe > Wipe Date, Cache, Dalvik > Then I reinstall Gapps.
That's not a clean flash is it....? DO I need to root my OPO to clean flash anything?
Thanks for the help :I
Clean flash of Gapps ? You mean clean flash of the whole ROM
Go to TWRP and wipe system, data, cache, dalvik without internal storage to preserve your installation .zips
Then flash the ROM, Gapps and reboot to system :good:
akabour said:
Clean flash of Gapps ? You mean clean flash of the whole ROM
Go to TWRP and wipe system, data, cache, dalvik without internal storage to preserve your installation .zips
Then flash the ROM, Gapps and reboot to system :good:
Click to expand...
Click to collapse
Oh, gotcha! I was just missing one small step haha. Thank you