[Q] Please help with BioHazard installation - General Questions and Answers

Hi ! I want to install BioHazard,but after installation i've got loopback.I try to install it through ClockworkMod Touch 6.0.1.2. Also i do wipe data/factory reset,wipe cache partition,wipe dalvic cache anf fromat data system cache.I don't install Gapps.What should i do to install it without loopback.Now i'm on Gigabread

OK, you first of all don't panic !!!
Now, first of all flash TWRP recovery - http://forum.xda-developers.com/showthread.php?t=1694617 from CWM by putting it into SD card and then flashing it.
Now, simply download the Bio Hazard ROM from http://forum.xda-developers.com/showthread.php?t=1917906 , and again put it in SD card.
Now, download Gaaps for your mobile from this URL - http://goo.im/gapps/gapps-ics-20120429-signed.zip
Now, boot into recovery, and then go to Wipe Menu, there wipe system, data ( factory reset ) and all the cache.
Now, go to install menu, and there choose Bio Hazard ROM file that you downloaded into your SD card.
Flash it.
Now, flash Gapps that was in your SD card.
Now simply reboot your mobile !!!
All done your mobile should be working !
Hope I helped you ! :fingers-crossed:
:highfive:
And pls hit the thanks button if I helped you !

hello, go to recovery with the buttons and make conbinazione wipe Dalvik cache and then install the gapps, wipe cache and wipe Dalvik cache and reboot your device ...

Related

[q] plzzzzz help me..my s2 stuck while installing bftor rom

plz help...i was complted installation biftor v4.7 ..when the first bootup it stck on samsung log...help plzzzzzzzzzzzzzz..wht i can do..also wipe data by given biftor super scrip..wht can i do..anyone help
First install v4.0 and then flash v4.7
To install v4,0 and then v4.7 read the opening post.
Steps:
Goto recovery
Backup the existing ROM (Just In case). Also backup the /efs folder (just in case)
wipe dalvik cache (in advanced)
wipe cache
wipe data
format /system (optional - read below)
install the superwipe
install the 4.0
wipe cache
wipe dalvik cache
reboot.. till the rom boots..
Then Flash v4.0
then turn off (no need to complete the setup procedure - you can do this after installing v4.7)
install the 4.7
instal the market zip
wipe cache
wipe dalvik cache
fix permissions
then reboot!
I usually also do a format /system to ensure a clean install. Prevents some force closes later
Please verify the md5 of the files you downloaded to ensure they are not corrupted.
v4.0 (MD5): 990bf3ddb2a3a1374995d1ff5946bf9c
v4.7 (MD5): eb934715f441bd5ce6d747493ca91a38
I also installed v4.7 yesterday. Worked great! No issues so far
anshad666 said:
plz help...i was complted installation biftor v4.7 ..when the first bootup it stck on samsung log...help plzzzzzzzzzzzzzz..wht i can do..also wipe data by given biftor super scrip..wht can i do..anyone help
Click to expand...
Click to collapse
ritz28 said:
First install v4.0 and then flash v4.7
To install v4,0 and then v4.7 read the opening post.
Steps:
Goto recovery
Backup the existing ROM (Just In case). Also backup the /efs folder (just in case)
wipe dalvik cache (in advanced)
wipe cache
wipe data
format /system (optional - read below)
install the superwipe
install the 4.0
wipe cache
wipe dalvik cache
reboot.. till the rom boots..
Then Flash v4.0
then turn off (no need to complete the setup procedure - you can do this after installing v4.7)
install the 4.7
instal the market zip
wipe cache
wipe dalvik cache
fix permissions
then reboot!
I usually also do a format /system to ensure a clean install. Prevents some force closes later
Please verify the md5 of the files you downloaded to ensure they are not corrupted.
v4.0 (MD5): 990bf3ddb2a3a1374995d1ff5946bf9c
v4.7 (MD5): eb934715f441bd5ce6d747493ca91a38
I also installed v4.7 yesterday. Worked great! No issues so far
Click to expand...
Click to collapse
ya its workd....
thanx alotzzzz
ritz28 said:
First install v4.0 and then flash v4.7
To install v4,0 and then v4.7 read the opening post.
Steps:
Goto recovery
Backup the existing ROM (Just In case). Also backup the /efs folder (just in case)
wipe dalvik cache (in advanced)
wipe cache
wipe data
format /system (optional - read below)
install the superwipe
install the 4.0
wipe cache
wipe dalvik cache
reboot.. till the rom boots..
Then Flash v4.0
then turn off (no need to complete the setup procedure - you can do this after installing v4.7)
install the 4.7
instal the market zip
wipe cache
wipe dalvik cache
fix permissions
then reboot!
I usually also do a format /system to ensure a clean install. Prevents some force closes later
Please verify the md5 of the files you downloaded to ensure they are not corrupted.
v4.0 (MD5): 990bf3ddb2a3a1374995d1ff5946bf9c
v4.7 (MD5): eb934715f441bd5ce6d747493ca91a38
I also installed v4.7 yesterday. Worked great! No issues so far
Click to expand...
Click to collapse
There's nothing left to be explained ....
You covered it all.....great job:thumbup:
@op pls press thanks for the guy who helped you... it also avoids posts saying just thanks...
Peace
Sent from my Xperia Neo V using Tapatalk 2

complete wipe???

How to do a complete wipe before flashing a 4.2.1 rom.... (cruzermod)...
Plz tell me the steps to flash the rom step by step....
First you need to root your device and get a CWM recovery. For this youtube it. Then place the rom in the root of your sd card. Follow the points below:
1. Enter recovery mode and go to wipe data/factory reset and select yes
2. Then go to mount and storage and format system, select yes
3. Wipe cache partation, select yes
4. Install zip from sd card and select the rom and install.
5. After installation, go to advanced and wipe dalvik cache and clear cache partation again an then reboot! Done!
Click the thanks button if i helped!
Sent from my Canvas 2 working on stock jellybean 4.1.1

[Q] help please my explorer is frozen on the htc bootlogo because of an update zip

Someone please i need serious help with my explorer.
So this is what happened today i finally rooted my explorer and i looked at a 4.0 jelly bean update and saw that your phone needed to be rooted so thats what i did.Then i downloaded the zip and copyed it to my sd card so after that i went into recovery mode (CWM) and used "install zip through sd card" or somthing like that. so i proceeded to install the update after it installed a message at the bottom said that the instalation aborted and i rebooted the device. Then it happened the damn thing froze and i tried neraly everything i could find from forums.
so please please help me
flash a custom rom after cleaning everything in recovery.
Affangta said:
flash a custom rom after cleaning everything in recovery.
Click to expand...
Click to collapse
So how do I clean up recovery do I just do a wipe and a factory reset and then use one of the rooms on this website
jbra97 said:
So how do I clean up recovery do I just do a wipe and a factory reset and then use one of the rooms on this website
Click to expand...
Click to collapse
go to recovery:
1. wipe factory data/reset
2.go to mounts and storage
3.format everything except sd card.
4.go to advanced.
5.wipe dalvich cache.
6. go to install zip through sd card select the rom zip.
7.after install reboot.
done.
shubhojit89 said:
go to recovery:
1. wipe factory data/reset
2.go to mounts and storage
3.format everything except sd card.
4.go to advanced.
5.wipe dalvich cache.
6. go to install zip through sd card select the rom zip.
7.after install reboot.
done.
Click to expand...
Click to collapse
Cheers mate actually worked

[how to] install custom roms

HOW TO INSTALL CUSTOM ROM ON C2+​STEPS:-​
Root Your deviceFrom here- v1 & v2
Install Custom Recovery -
Then download install custom recovery of your device.WE Having Two Types Of Recovery-
HERE IS GUIDE FOR INSTALLING CUSTOM RECOVERY--
ClockWorkMod v5.5.0.4 Recovery-
http://forum.xda-developers.com/micr...overy-t2327786
Philz Touch Recovery-
http://forum.xda-developers.com/micr...overy-t2364465
[OPTIONAL]INCREASE PARTIION:-,AS Some custom roms such as xperia full & color os etc. require more space to install so you have to increase system partition.Do this process from here
Download rom and put it in root of your SD card or internal sd.
Backup Your Data & ROM VIA CWM(as your Wish) & reboot into recovery.
Do wipe data and factory reset,then wipe cache partition.
Do dalvic cache clear and the from advance menue format system.
Now go back and choose install from sd card and choose your rom.zip and select install.
After install finish reboot your device or it may reboot automatically.if a patch comes with your rom then install that also.
Finished,Enjoy your new rom,if you Find bugs then ask your rom developer.And If You Like Rom Then HIT THANKS
​
CREDITS-
ALL THE OP OF LINK MENTIONED ENJOY THE CREDIT.
Sorry mate when i press wipe data/Factory reset.. ..all that happens after is (NO COMMAND)..
oh Got it mate sorry i think i need to root the phone first

[Completed] [Q] how to restore old rom after changed to another by using cwm recovery

If i take a backup in cwm recovery and then install unofficial rom lollipop .. can I restore the old official rom I have backed up before change ? yes or no please .. & thank you
s4 mini dous gt-i9192
Jellybeen 4.2.2
Ty v much mr arshid ..
Please look at this steps if anything is wrong .. could you tell me please before I do anything stupid ?
Install custom rom :
1-from cwm recovery backup to sd card .. and copy to safe place 2- wipe data , factory reset , wipe cache partition , clear dalvik cashe
3- install zip .. rom.zip
4- the install gapps.zip
5- restart now
...
When I want back to old version
1- wipe data , factory reset , wipe cache partition , clear dalvik cashe
2- restore backup from sd card
3- after finish (restart the phone)
Done !
ty again
Tyaginator said:
Yes of course
Click to expand...
Click to collapse
Thank you v much
red-mist said:
Ty v much mr arshid ..
Please look at this steps if anything is wrong .. could you tell me please before I do anything stupid ?
Install custom rom :
1-from cwm recovery backup to sd card .. and copy to safe place 2- wipe data , factory reset , wipe cache partition , clear dalvik cashe
3- install zip .. rom.zip
4- the install gapps.zip
5- restart now
...
When I want back to old version
1- wipe data , factory reset , wipe cache partition , clear dalvik cashe
2- restore backup from sd card
3- after finish (restart the phone)
Done !
ty again
Click to expand...
Click to collapse
Wait wait wait!!!
You missed one step!
It's not that important; but in case if you need it.
If you need your whatsapp messages / music playlists as before, you need to copy everything in your internal sd card to your pc(or anywhere) and put it back after you restore the cwm backup.
Sent from my Sparkle V using Tapatalk

Categories

Resources