Sorry this is my first post.
I tried to share my experiences.
When I try to install XDuosV3 1.5 for GT-S6102.
by following these steps from http://forum.xda-developers.com/showthread.php?t=2118569
Download XDV3_ROM_1.5_PR
Download ClockWorkMod
Put them in the root of your SD Card ROOT just not a Folder
Switch off your phone
Go to Recovery mode by pressing Volume up + Home + Power Button
Use the volume keys to scroll Up and Down
wipe DATA
wipe CACHE
Choose Apply update from SD card
Choose CWM -> you will boot into CWM Recovery roomates a yellow colored text
Wipe DATA and CACHE via CWM again
Go to Advance
Wipe Dalvik Cache
Wipe Battery Stats
Go to Mount and Storage
format Cache
Data format
format System
Mounting System / Data and Cache
Press Back Button
Choose Install Zip From SDCard
Choose zip from sdcard
THEN Select -> XDV3_ROM_1.5_PR
Choose "yes" ....
Wait for the installation to be finished
After that Reboot Cell Phone (do not do it)
After, Wait for installation to be finished
Wipe DATA and CACHE via CWM again
After that Reboot your Phone
sorry if I'm wrong.
Related
hi
SOLVEDsorry for my bad english
i have rooted my phone and installed cwm and so installed GingerDX 25 by this Structures :
Code:
wipe data/factory reset
wipe cache partition
advanced > wipe dalvik cache
mount and storage > format system
instal zip from sd card
reboot
then the rom fully loaded (after about 5 minutes) and after a while working on it i pressed the power button and selected "reboot to cwm" and followed this structures to reinstall that file (GingerDX 25) again by this new structures :
Code:
wipe data/factory reset
wipe cache partition
advanced > wipe dalvik cache
[COLOR="Red"]advanced > wipe battery status[/COLOR]
mount and storage > format system
instal zip from sd card
reboot
but after reboot i waited about 20 minutes but the phone is freezed on first "sony ericsson" (text logo) and now i cant load cwm with touching screen or clicking back button repeatly to restore my backup
i forced to pull out the battery
the bootloader isnt breaked
what should i do now ?
try help
tempfordroid said:
hi
SOLVEDsorry for my bad english
i have rooted my phone and installed cwm and so installed GingerDX 25 by this Structures :
Code:
wipe data/factory reset
wipe cache partition
advanced > wipe dalvik cache
mount and storage > format system
instal zip from sd card
reboot
then the rom fully loaded (after about 5 minutes) and after a while working on it i pressed the power button and selected "reboot to cwm" and followed this structures to reinstall that file (GingerDX 25) again by this new structures :
Code:
wipe data/factory reset
wipe cache partition
advanced > wipe dalvik cache
[COLOR="Red"]advanced > wipe battery status[/COLOR]
mount and storage > format system
instal zip from sd card
reboot
but after reboot i waited about 20 minutes but the phone is freezed on first "sony ericsson" (text logo) and now i cant load cwm with touching screen or clicking back button repeatly to restore my backup
i forced to pull out the battery
the bootloader isnt breaked
what should i do now ?
Click to expand...
Click to collapse
stock kernel or naA / alfs kernel
or corrupt file / scandisk memory before copy file
or re download file
i install CM10 Alpha4 then flash gbapps.
suddenly this F****** AOSP android keyboard always popup.
i use this step.but still popup occurs
Stock ROM
1. Flash CWM Compatible Kernel (CF ROOT)
2. Reboot to Recovery.
3. Wipe Data / Factory Reset. (MUST DO THIS STEP)
4. Select the ROM zip from your SD Card and flash.
4a Auto rebooted into recovery, (if show error on mounting /cache, and cant mount manually in mount and storage, do wipe /cache
4b. Go to Advanced -> Reboot Recovery
4c. Select the ROM zip from your SD Card and flash again
5. Go to Advanced -> Reboot Recovery.
6. Mounts and Storage -> Format dbdata ( you wouldn't find this in CWM 6 so just ignor)
7. Flash Google Apps.
8. Reboot
1.flash XXKPE+Pit
2.flash XXKPE without pit
3.flash DDLF2
4.flash CF-ROOT DDLF2
5.goto cwm
-wipe data
-wipe cache partition
-goto advance wipe dalvik cache
6.install cm10a4
-don't reboot
7.install Gapps
8.reboot
9.wait untill 5 minutes
10.final reboot
:good:
i have a problem with my galaxy s019003, i cannot find the keyboard.
Kindly i need help
HI!
I have two quesstions. I downloaded Xperia Ultimate HD 3.1 (Beta). I found two guides to install it, but I don't know which i can should use.
I have Xperia Arc S with LOCKED bootloader.
First: http://forum.xda-developers.com/showthread.php?t=1955248
There are some steps, which are skip in "official" guide in UHD thread.
For example: according to Tesla's guide I should:
1. Wipe data/factory reset
2. wipe cache partition
3. go to mounts and storage menu
4. format /system
5. format /data
6. format /cache
7. go back to main menu
8. go to advance menu
9. wipe dalvik cache
10. wipe battery stats
11. go back to main menu
12. choose install zip from sd card and then choose xperia_ultimate_hd_2.0.zip file or xperia ultimate hd 2.0.2.zip
13. After Complete Installation untick "reboot" <-- (NOT reboot device) and press reboot in CWM
14. you are now back in cwm, choose reboot
15. Now your phone should start up after some minutes and you can enjoy your Arc with Ultimate HD™ ROM 2.0
But according to "official" guide I should only:
For Unlocked Bootloaders: Flash any Kernel for stock ICS.
For Locked Bootloaders: Root your phone using this tutorial, than install CWM using this app
Place ROM on SD-Card
Back up user apps and data. (Various apps available, search Google Play. This is a popular one)
Power off phone.
Boot to CWM (Keep pressing the Volume Down key after the Sony logo appears)
Wipe Data/Factory Reset
Mounts and Storage --> Format /System
Advanced > Wipe Battery Stats
Install zip from SD card > Choose Xperia Ultimate HD
Follow on screen instructions on AROMA.
After Complete Installation untick "reboot" and select reboot in CWM
Give the phone a good full charge, and enjoy your brand new phone!
As you cas see in "official" guide aren't steps like: format /cache, wipe dalvik cache, format /data, format /cache.
So, which guide I must use to avoid bootloop? And, can I use Eroot to root my Xperia?
Soooorry for my awful English
pawel4427 said:
HI!
I have two quesstions. I downloaded Xperia Ultimate HD 3.1 (Beta). I found two guides to install it, but I don't know which i can should use.
I have Xperia Arc S with LOCKED bootloader.
First: http://forum.xda-developers.com/showthread.php?t=1955248
There are some steps, which are skip in "official" guide in UHD thread.
For example: according to Tesla's guide I should:
1. Wipe data/factory reset
2. wipe cache partition
3. go to mounts and storage menu
4. format /system
5. format /data
6. format /cache
7. go back to main menu
8. go to advance menu
9. wipe dalvik cache
10. wipe battery stats
11. go back to main menu
12. choose install zip from sd card and then choose xperia_ultimate_hd_2.0.zip file or xperia ultimate hd 2.0.2.zip
13. After Complete Installation untick "reboot" <-- (NOT reboot device) and press reboot in CWM
14. you are now back in cwm, choose reboot
15. Now your phone should start up after some minutes and you can enjoy your Arc with Ultimate HD™ ROM 2.0
But according to "official" guide I should only:
For Unlocked Bootloaders: Flash any Kernel for stock ICS.
For Locked Bootloaders: Root your phone using this tutorial, than install CWM using this app
Place ROM on SD-Card
Back up user apps and data. (Various apps available, search Google Play. This is a popular one)
Power off phone.
Boot to CWM (Keep pressing the Volume Down key after the Sony logo appears)
Wipe Data/Factory Reset
Mounts and Storage --> Format /System
Advanced > Wipe Battery Stats
Install zip from SD card > Choose Xperia Ultimate HD
Follow on screen instructions on AROMA.
After Complete Installation untick "reboot" and select reboot in CWM
Give the phone a good full charge, and enjoy your brand new phone!
As you cas see in "official" guide aren't steps like: format /cache, wipe dalvik cache, format /data, format /cache.
So, which guide I must use to avoid bootloop? And, can I use Eroot to root my Xperia?
Soooorry for my awful English
Click to expand...
Click to collapse
BETTER use the official one given in the thread, because it is the instruction GIVEN by the devs.
and about the Eroot, yes you can use it look here http://forum.xda-developers.com/showthread.php?t=2219711
How to do a complete wipe before flashing a 4.2.1 rom.... (cruzermod)...
Plz tell me the steps to flash the rom step by step....
First you need to root your device and get a CWM recovery. For this youtube it. Then place the rom in the root of your sd card. Follow the points below:
1. Enter recovery mode and go to wipe data/factory reset and select yes
2. Then go to mount and storage and format system, select yes
3. Wipe cache partation, select yes
4. Install zip from sd card and select the rom and install.
5. After installation, go to advanced and wipe dalvik cache and clear cache partation again an then reboot! Done!
Click the thanks button if i helped!
Sent from my Canvas 2 working on stock jellybean 4.1.1
Recently, I wanted to root my H7100 but I was unable to connect my phone to computer. So, I decided to root it in other way. I wanted to get some more space and to get a Hardmaster ROM so I decided to experiment.
First, I found RootMaster apk. So I tried it and it worked. (http://d-h.st/Ctf)
Then I have done following (see the attachments):
1. picture - Press the root button
2. picture - Press the root button
3. picture - Press the purple button
Well, now you are rooted.
Next step was to put recovery into my phone.
1. I have downloaded and installed the app Flashify from the play store (https://play.google.com/store/apps/details?id=com.cgollner.flashify)
2. Download Recovery.img (http://d-h.st/12M)
3. Flash it through Flashify (press Recovery image and then Choose a file, in Open From choose your file explorer and locate a recovery.img and choose Yup!
My next step was to increase the internal memory with this app (http://d-h.st/Z0P)
1. Install it as any other APK
2. Run it and choose the size you wish, but DON'T CHOOSE 3GB - it will erase your internal sd card
3. Press Reboot recovery and Wipe Data/Factory Reset the phone.
And if you want to get rid of chinese bloatware, get some speed for your phone, or some other tweakes you can install Hardmaster's ROM. But not by his way, we can do it the faster way.
1. Download Harmaster's ROM backup (https://docs.google.com/file/d/0B20F9DClLNBbUzRCWjI4bVJBN1U/edit)
2. Put it into sdcard/clockworkmod/backups/ (make a new folder here and put the backup into it)
3. Flash into recovery (turn off the phone, press the Volume UP + Power button at the same time...you will see the traditional CWM screen and wipe data/factory reset, wipe dalvik cache (Advanced-Wipe Dalvik cache) and format system (mounts and storage), after that press Backup and Restore and choose the name of your folder where you have put the backup
4. Wait for it...
5. Reboot the system and after a while (5-10 min.) the phone will boot.
Well, now it's up to you to develop some new things into this phone. If you want some tweakes you can install Exposed installer.
Happy rooting