Database Info

Unable to install xperia t rom

Hi
I want to install this rom http://forum.xda-developers.com/showthread.php?t=2107109
I have unlocked bootloader, and rooted .587 ics on my xperia ray..
i've installed cwm via xparts app from the play store...
and then i've booted into cwm and installed the zip through it.... then when the phone reboots it is stuck at the sony logo and doesnt move any further.... stuck stuck stuck... i'm on stock kernel of .587... plz help.. i really want that rom on my mobile.... i've successfully installed cm9 and cm10 on my mobile previously but now i'm unable to install this rom... plz help
step by step solution would be preferrable...
THANX

Hi there!
It looks to me that you are missing a few steps there.
First of all enter into Recovery (CWM) and do a Backup so that you can always restore to where you were!
Assuming that you have obviously put the zip on your SD just continue in Recovery.
Scroll down to Wipe Data/Factory Reset
Scroll down to Yes Delete all user data
Scroll down to install zip from SDcard
Choose zip from SDcard
Scroll down to your zip file and install
Well mate according to the developer the Wipe Data/Factory Reset is all you need but see how you go and let me know if it worked for you!
Oh and don't forget to hit Thanks!

ac3ofS2 said:
Hi there!
It looks to me that you are missing a few steps there.
First of all enter into Recovery (CWM) and do a Backup so that you can always restore to where you were!
Assuming that you have obviously put the zip on your SD just continue in Recovery.
Scroll down to Wipe Data/Factory Reset
Scroll down to Yes Delete all user data
Scroll down to install zip from SDcard
Choose zip from SDcard
Scroll down to your zip file and install
Well mate according to the developer the Wipe Data/Factory Reset is all you need but see how you go and let me know if it worked for you!
Oh and don't forget to hit Thanks!
Click to expand...
Click to collapse
I forgot mention all this above..... i've done all this and yet no gain

Hi again...do not worry. Let's add some other steps:
Open Recovery and repeat the Wipe Data/Factory Reset step above and add these steps below:
Wipe Cache Partition
Scroll down to Advanced
Choose Wipe Dalvik Cache
Go back to main menu
Scroll down to and choose Mounts and Storage
Then choose these 3 steps, each at the time, always scrolling down to yes and going back to the same place after each format is completed.
Format /Cache
Format /Data
Format / System
Then do the following steps like Install zip from SDcard, etc.
Now!!! That has to work......lol
Let me know how it went for you. I am assuming you can still get into your CWM right?
Oh and don't forget to hit THANKS.

Install XDuosV3 1.5 for GT-S6102, Brick/Bootloop? Try this!

Sorry this is my first post.
I tried to share my experiences.
When I try to install XDuosV3 1.5 for GT-S6102.
by following these steps from http://forum.xda-developers.com/showthread.php?t=2118569
Download XDV3_ROM_1.5_PR
Download ClockWorkMod
Put them in the root of your SD Card ROOT just not a Folder
Switch off your phone
Go to Recovery mode by pressing Volume up + Home + Power Button
Use the volume keys to scroll Up and Down
wipe DATA
wipe CACHE
Choose Apply update from SD card
Choose CWM -> you will boot into CWM Recovery roomates a yellow colored text
Wipe DATA and CACHE via CWM again
Go to Advance
Wipe Dalvik Cache
Wipe Battery Stats
Go to Mount and Storage
format Cache
Data format
format System
Mounting System / Data and Cache
Press Back Button
Choose Install Zip From SDCard
Choose zip from sdcard
THEN Select -> XDV3_ROM_1.5_PR
Choose "yes" ....
Wait for the installation to be finished
After that Reboot Cell Phone (do not do it)
After, Wait for installation to be finished
Wipe DATA and CACHE via CWM again
After that Reboot your Phone
sorry if I'm wrong.

[Q] Sony Xperia Sola got stuck in Sony boot logo!

Hi,
Placed the ROM.zip in sd card and did a full wipe. In my CWM, there is no option to go back, hence rebooted the system to install the ROM after full wipe. My phone got stuck at Sony logo and even unable to access CWM. Please help!
I did the following steps mentioned in the ROM page of XDA to install the custom ROM on my phone.
1. Flash boot.img from .zip via Fastboot ---- LEFT OUT THIS ONLY STEP BY MISTAKE and done the subsequent steps.
2. Enter CWM
3. Make a full wipe:
4. Wipe Data/Factory Reset
5. Wipe Cache
6. Wipe Dalvik Cache
7. format /data (advanced)
8. format /dache (advanced)
9. format /system (advanced)
-Flash ROM. --- YET TO FLASH THE ROM.
I'm unable to access CWM. I can't power off, I can only restart, but getting stuck at Sony logo everytime. It would be very kind if you could help me in getting the phone to work as normal.
Thanks,
Irfan

the sulotion
saeedirfaan said:
Hi,
Placed the ROM.zip in sd card and did a full wipe. In my CWM, there is no option to go back, hence rebooted the system to install the ROM after full wipe. My phone got stuck at Sony logo and even unable to access CWM. Please help!
I did the following steps mentioned in the ROM page of XDA to install the custom ROM on my phone.
1. Flash boot.img from .zip via Fastboot ---- LEFT OUT THIS ONLY STEP BY MISTAKE and done the subsequent steps.
2. Enter CWM
3. Make a full wipe:
4. Wipe Data/Factory Reset
5. Wipe Cache
6. Wipe Dalvik Cache
7. format /data (advanced)
8. format /dache (advanced)
9. format /system (advanced)
-Flash ROM. --- YET TO FLASH THE ROM.
I'm unable to access CWM. I can't power off, I can only restart, but getting stuck at Sony logo everytime. It would be very kind if you could help me in getting the phone to work as normal.
Thanks,
Irfan
Click to expand...
Click to collapse
the soulotion
You need xperia Flash tools 0.9.13 on your PC
you need the orginal xperia sola flashable file FTF (go to flash tool folder and past the Ftf file into frimware folder)
then boot into flash mode ( i think you can boot into flash mode in xperia sola by plug the usb and press Vol-down the the led has a whit color if this same xperia Go )
And from the flash tool program press flash the device then you have two choice, select flashmod.
then will show new window (frimware selector) chose the frimware you are coped into flas tool folder
the device will flashed with the ftf file and follow the instruc....

[GUIDE] How to install CyanogenMod based ROMs

Hi, there! This is a little guide of how to install CyanogenMod and CyanogenMod based ROMs. I've created this thread to could add a compatible guide to our device to this other thread.
1 - If your device is in stock ROM:
1. Download your desired ROM, you can find some links here.
2. Download GApps compatibles with your ROM, you can find it here or here.
3. Put the files (ROM and GApps) on root of external storage of your device.
4. Enter in recovery mode.
5. Select and confirm the wipe data/factory reset and wipe cache partition.
6. Select apply update from external storage.
7. Select the ROM file and confirm the process.
8. After installed, select the GApps file and confirm the process.
9. Now select reboot system now and wait. Note that first boot takes some time, wait at least five minutes.
2 - If you are upgrading or switching CyanogenMod ROMs:
1. Download your desired ROM and put on root of external storage of your device.
2. Enter in recovery mode.
3. Select and confirm the wipe cache partition.
4. After wipe cache partition, go to advanced and choose wipe dalvik.
5. Select install zip from sdcard and choose zip from external sd;
6. Select the ROM file and confirm the process.
7 .Now select reboot system now and wait. Note that the boot can takes some time, but not that much.
PS: to install the CyanogenMod 11 by Team Canjica you have to follow these steps.

eduds said:
Hi, there! This is a little guide of how to install CyanogenMod and CyanogenMod based ROMs. I've created this thread to could add a compatible guide to our device to this other thread.
1 - If your device is in stock ROM:
1. Download your desired ROM, you can find some links here.
2. Download GApps compatibles with your ROM, you can find it here or here.
3. Put the files (ROM and GApps) on root of external storage of your device.
4. Enter in recovery mode.
5. Select and confirm the wipe data/factory reset and wipe cache partition.
6. Select apply update from external storage.
7. Select the ROM file and confirm the process.
8. After installed, select the GApps file and confirm the process.
9. Now select reboot system now and wait. Note that first boot takes some time, wait at least five minutes.
2 - If you are upgrading or switching CyanogenMod ROMs:
1. Download your desired ROM and put on root of external storage of your device.
2. Enter in recovery mode.
3. Select and confirm the wipe cache partition.
4. After wipe cache partition, go to advanced and choose wipe dalvik.
5. Select install zip from sdcard and choose zip from external sd;
6. Select the ROM file and confirm the process.
7 .Now select reboot system now and wait. Note that the boot can takes some time, but not that much.
PS: to install the CyanogenMod 11 by Team Canjica you have to follow these steps.
Click to expand...
Click to collapse
Good tutorial for new peoples.

complete wipe???

How to do a complete wipe before flashing a 4.2.1 rom.... (cruzermod)...
Plz tell me the steps to flash the rom step by step....

First you need to root your device and get a CWM recovery. For this youtube it. Then place the rom in the root of your sd card. Follow the points below:
1. Enter recovery mode and go to wipe data/factory reset and select yes
2. Then go to mount and storage and format system, select yes
3. Wipe cache partation, select yes
4. Install zip from sd card and select the rom and install.
5. After installation, go to advanced and wipe dalvik cache and clear cache partation again an then reboot! Done!
Click the thanks button if i helped!
Sent from my Canvas 2 working on stock jellybean 4.1.1