Related
I don't think this has been mentioned, but has anyone ever dropped their Sensation WITHOUT a case on it? Did you get any dents? I'm curious, cos I wanna expose this phone's sexiness, but this bodyglove case is stopping it.
I dropped mine on my linoleum bathroom floor once. No dents, but the dark finish on the back cover chipped off where phone hit the floor.
rawrfische said:
I dropped mine on my linoleum bathroom floor once. No dents, but the dark finish on the back cover chipped off where phone hit the floor.
Click to expand...
Click to collapse
same happened to me today
So I'm assuming it would be worst on cement. Never mind, I'm keeping my case.
I've dropped mine on cement on a couple occasions from about pocket height. Didn't have a firm enough grip on it and it caught the corner of my pocket and pulled out of my hand. A couple very minor nicks in the aluminum frame were all that happened, screen is still flawless (unlike my friend's iPhone when it fell). If you want to keep the phone in impeccable shape, I'd leave the skin on. Damage is minor, but it does show.
Quite a few timed unfortunately. No dents and glass is fine. But the inside is somewhat damaged and switching my phone off and on is difficult. I'm planning to replace my back cover (which hopefully includes a new power button) soon and that that will fix the problem.
Sent from my HTC Sensation Z710e using xda premium
Fell my phone from only 3 inches high to the cement ground, and cracked the screen, I just can't believe it! However the good thing is it's just the bottom left part where the back key is
Sent from my One X using xda app-developers app
Bad luck :/ Luckily my phone fell down many times with case and it's not cracked
Mine was bumped off a bench at the gym. Fell about a foot and a half onto concrete with thin carpet cover. Shattered like...er, glass. Had to buy replacement through insurance.
Sent from my HTC One X using xda app-developers app
That's unfortunate. My gf has been really lucky with her falls (5+ car lap to concrete) without a shatter. I guess it depends on the angle.
Sent from my HTC One XL
case really helps ha
Sent from my Nexus 7
ah i thought i would protect it carefully but i was wrong...
Sent from my Nexus 7
yeah maybe mine just hit the corner
Sent from my Nexus 7
I had to replace one through insurance as well....sat down outside at Starbucks and if fell about 26 inches, hit top corner and that was all she wrote. Was still usable but to beautiful of a device to stare at a crack on it.
Needless to say I placed a silicone case on it now
square trade help easy my worry of this happening to me. It would suck to have to re-root and load my roms though
how much does it cost to replace it, and can you do it yourself?
Dropped mine from my lap in the car to the ground. Cracked the top and bottom of the diffuser. Problem is diffuser is bonded to the LCD so I have to replace the whole assembly which sucks very much bad.... Oh and I had the case on it too... Smh
Sent from my HTC One XL using xda app-developers app
I just bought one online for $18 and it took me 15 mins to replace. Very easy.
Sent from my HTC One X using xda premium
heyitsdan03 said:
I just bought one online for $18 and it took me 15 mins to replace. Very easy.
Sent from my HTC One X using xda premium
Click to expand...
Click to collapse
Where abouts? I just smashed mine this morning and it's pretty bad...
I'm still using, not much impact on normal use, just don't like the look of it...
Sent from my One X using xda app-developers app
V_N said:
Where abouts? I just smashed mine this morning and it's pretty bad...
Click to expand...
Click to collapse
When I get to work tomorrow i will post the url of the site.
Sent from my HTC One X using xda premium
V_N said:
Where abouts? I just smashed mine this morning and it's pretty bad...
Click to expand...
Click to collapse
http://www.etechnotics.com/touch-sc...cement-for-htc-one-x-s720e-htc-at-t-logo.html
$17.99 i just bought one im waiting on it to come in the mail and i found a youtube video to show me how to do it lol
For those who have had to replace the screen, does dust now get under it?
I replaced my screen on a few older phones (some replaced by a service, others by myself), and like clockwork after a few months, dust develops under the screen.
I've almost pretty much settled that if my screen shatters, I'll get it fixed and immediately sell it to avoid that.
Best Case ist Otterbox Commuter or Defender
I hate Otterbox Defenders...so bulky & just ugly. I know, theyre for protection, but these new phones like the One X are just uglied up by the big bulky cases.
Anyway, as for the display changing...I just did a couple last week, no picnic at all. The person that said he changed one in 15 minutes I would bet the farm was a bad overexaggeration...unless you do 20 a day you won't even get this baby apart completely to even think about replacing the screen in 15 minutes.
As for $17.99 I haven't looked at the link yet, but I'm betting it's just for the outer glass (touch panel) and not the digitizer/combo assembly. I scoured the net and could only find the touch panel for this price. The combo (touch panel & lcd) as one fused unit I found for about $80, normally around $145 in most of the usual places.
These ship with the touch panel/digitizer fused, so separating them is basically impossible. I've seen a couple of posts where people say they've successfully removed the glass & replaced it only, but I'm guessing it was someone blowing smoke, or their screen has already been replaced with the 2 individual parts that are not fused.
I opted to choose the 2-part deal for one main reason...both of the ones I replaced were in cases, and fell a very short distance & shattered badly. I'm guessing like the OG Evo, there's really not going to be anything you can do to ultimately protect these, so I'm anticipating future screen changes...hence, the unfused 2-part combo.
I got the outer glass for less than $20, and the LCD for $35 both from Amazon. I was pretty thrilled when I got the glass, as the AT&T branding is gone & replaced with HTC instead. (I hate branding, especially since I use mine on Straight Talk)
I think the first one took me about 3 hours to do, the pieces are a horrible blind jigsaw puzzle of dependencies inside the phone, everything is gorilla glued & two-sided taped to death so it's difficult to break down without destroying important, fragile stuff.
After disassembly it wasn't bad with a heat gun to get the screens out, then made sure to clear out all of the adhesive which took quite a while...that stuff is gnarly.
Then I put in the LCD panel, got it situated & used 2 sided tape cut to around 1cm to edge the LCD for the Touchscreen to be laid on it. Added a LIGHT coat of some really strong bonding adhesive to the 4 corners & the middle of the 2 sides to make sure it holds but don't bleed out under the screen.
Laid down the touchpanel & applied firm pressure for a few hours before I reinserted the phone assembly back into the casing.
The beauty ring around the outer screen got a bit ugly on the first one, the second one came out pristine. No issues at all with bubbling under the screen, it's super sensitive & feels like they did brand new again.
The only issue I have, is when you're doing disassembly, one of the ribbons is held down by the very flimsy & fragile piece of circuit tape that the haptic buttons are in, and on both of them, the lights are much dimmer under the haptics than they were before. I don't think there's any way to remove & reinstall this piece without some minor amount of damage or degradation to the lights, but it functions perfectly fine.
All in all, it worked well, and if I have to replace a cracked screen again, it will be a much less expensive, easier fix the second time around. Also pay close attention when reassembling to your antenna wire, it has a connection much like the bluetooth wire you attach to a card in a laptop and if you're not very careful, when snapping back into place it can interfere with your antenna & your phone charging system.
If this helped at all, please click the "Thanks"
androidjunkie71 said:
I got the outer glass for less than $20, and the LCD for $35 both from Amazon. I was pretty thrilled when I got the glass, as the AT&T branding is gone & replaced with HTC instead. (I hate branding, especially since I use mine on Straight Talk)
I think the first one took me about 3 hours to do, the pieces are a horrible blind jigsaw puzzle of dependencies inside the phone, everything is gorilla glued & two-sided taped to death so it's difficult to break down without destroying important, fragile stuff.
After disassembly it wasn't bad with a heat gun to get the screens out, then made sure to clear out all of the adhesive which took quite a while...that stuff is gnarly.
Then I put in the LCD panel, got it situated & used 2 sided tape cut to around 1cm to edge the LCD for the Touchscreen to be laid on it. Added a LIGHT coat of some really strong bonding adhesive to the 4 corners & the middle of the 2 sides to make sure it holds but don't bleed out under the screen.
Laid down the touchpanel & applied firm pressure for a few hours before I reinserted the phone assembly back into the casing.
The beauty ring around the outer screen got a bit ugly on the first one, the second one came out pristine. No issues at all with bubbling under the screen, it's super sensitive & feels like they did brand new again.
Click to expand...
Click to collapse
So theres no issues with the screen changing colors? Like the old digital watches and calculators used to when you pressed the screen? I still haven't replaced mine and looking for an alternative to the 150 for the combo. Not really concerned too much with longevity, I'll get rid of it or redo it in about a year anyway so if it last that long I'm good.
Hi all
I had my Nexus 5 since launch day, but in the last few months I have noticed two rather large areas of the middle of the screen are always oily or "smudged".
If I clean the screen by carefully applying sellotape and then lifting, all oil and smudges are removed, but even after cleaning my hands and using the screen lightly in the same two areas there is always a permanent smudge, and in those areas it feels different, as if the coating is removed.
I have not used any screen protectors or cleaners and I take great care of my Nexus.
It is annoying with the glare.
I haven't had a phone do this before..
I'm going to pop it back to the shop perhaps I just got a unlucky one, but I am wondering about buying a screen protector if this is an issue with the phone..
Anyone else experienced this?
Cheers
Photos?
Sent from my Nexus 5 using Tapatalk
It's happened with the last two nexuses I've had (Galaxy & 4)
Just normal wear and tear.
Sent from my Nexus 5
LaurenceGough said:
Hi all
I had my Nexus 5 since launch day, but in the last few months I have noticed two rather large areas of the middle of the screen are always oily or "smudged".
Click to expand...
Click to collapse
post some clear pics...
Well, I wouldn't say I'm as heavy a user as most on here!! I use it for about half an hour to an hour a day on average. My last phone never did this after 2 and a bit years of heavier usage and I wouldn't call it acceptable for the use I have done. Pretty poor if this is normal for nexus devices, although I couldn't find anything on this relating to the Nexus 5 (only 4, and that wasn't much) in my quick searches online.
I think there must have been a defect in mine which has just got worse over time as I treat this like my baby!
Here is a pic, you see the horizontal lines, almost like a "Z" shape, it appears this is where the coating has come off.
LaurenceGough said:
Well, I wouldn't say I'm as heavy a user as most on here!! I use it for about half an hour to an hour a day on average. My last phone never did this after 2 and a bit years of heavier usage and I wouldn't call it acceptable for the use I have done. Pretty poor if this is normal for nexus devices, although I couldn't find anything on this relating to the Nexus 5 (only 4, and that wasn't much) in my quick searches online.
I think there must have been a defect in mine which has just got worse over time as I treat this like my baby!
Here is a pic, you see the horizontal lines, almost like a "Z" shape, it appears this is where the coating has come off.
Click to expand...
Click to collapse
Test it add a single drop of water on the phone and move the water around by tilting the screen if the coating is still in that area it water should float and move easily without trace over the ear piece with tape for precaution do not submerge the screen or phone
Sent from my Nexus 5 using Tapatalk
My gf had the same problem with old iPhone 4. She went to the shop to try to replace it under warranty, but they refused to do that. They said something external caused it (like some liquid).
I know this is not helpful post...just sharing . I hope that you will be able to exchange it for new one...
Sent from my Nexus 5 using Tapatalk
Tenhi said:
My gf had the same problem with old iPhone 4. She went to the shop to try to replace it under warranty, but they refused to do that. They said something external caused it (like some liquid).
I know this is not helpful post...just sharing . I hope that you will be able to exchange it for new one...
Sent from my Nexus 5 using Tapatalk
Click to expand...
Click to collapse
There's no point. All phones with this oleophobic coating have this "problem".
2 ways to verify for certain if the oleophobic coating is gone. First, you can put a few drops of cooking oil on the screen, and try to smear it. If the coating is still there, the oil beads up instead of smearing. See here
Second, if you dare, write on the screen with a sharpie/permanent marker. If there's coating, the ink will bead up and can easily be wiped away. If not, ink will dry and can't be wiped unless you use alcohol.
I use an oleophobic screen protector like the one in the video.
I'm suffering with this problem too and I got my Nexus 5 in November. My galaxy s2 lasted 3 years with its coating and still to this day hasn't given me a spot like that.
Sent from my Nexus 5 using Tapatalk
Argh! That must be soo annoying! I guess you were just unlucky that you got a subpar screen on your beast
However, can this issue be tackled by applying on a decent screen protector??
- Swiped from my Nexus 5!
vin4yak said:
Argh! That must be soo annoying! I guess you were just unlucky that you got a subpar screen on your beast
However, can this issue be tackled by applying on a decent screen protector??
- Swiped from my Nexus 5!
Click to expand...
Click to collapse
Yeah screen protector is a different surface but once you remove it the issue is still there on the glass.
Sent from my Nexus 5 using Tapatalk
Oleophobic coatings do come off over time and with use. I never have this problem as I personally can't use a screen without a protector. Like to keep my things in pristine condition. A good glass screen protector will help you forget about your problem though.
I had his issue with my Nexus 4 after only 3 months of use, bought a screen protector to protect what coating I had left. I don't think it's down to a bad screen etc just the texture of some people's hands and the way they use it is different, my coating wore off top left right at the notification but, I'd obviously been consistently putting pressure there.
Sent from my Nexus 5 using xda app-developers app
Mine wore down and I replenished it with this http://www.ebay.com/itm/Fusso-Smart...t=US_Cell_Phone_PDA_Cases&hash=item27de7c859e
Well it's a very poor quality screen if it does this that quickly. My old HTC Desire Z lasted years with no problem and the same use. Maybe I did just get unlucky it seems a few others have the same problem...
I had it replaced by carphone warehouse but their service was useless and it took almost a month to get it changed, the first screen they replaced was covered in scratches all over!! What a disgrace, so now it has had to be opened up twice - never great for a phone and especially such an expensive and new one.
I am now using an Anker glass screen cover which feels a bit better than the standard glass, has all the coatings, is the same hardness if not harder and comes with a warranty + if they screen goes I can just replace it for around £12 without having to send it off for someone to mess up and be without my phone.
I didn't want to use a screen protector but this Anker glass one is crystal clear and does not affect anything, and I'm very fussy.
Had this happen on my S2. I got a Zagg HD screen protector at Best Buy (because they will install it and if it's not perfect they'll open another one and redo it; plus I'm clumsy and attract dust in mid-application) and it worked great for 2 years and counting. I've been itching to go get one on this phone too but keep putting it off. This thread reminded me off what I have to look forward to if I don't.
I found that using a stylus seems to hasten the erosion of the layer, at least when comparing my S2 to my wife's as well as our tablets.
Sent from my Nexus 5 using Tapatalk
Having the same issue here.
Has anyone tried to see if Google will fix it under warranty?
I should hope they would fix it under warranty! Send it back. It's a disgrace for it to happen in such a short time period.
So I finally got around to calling and I was told there wasn't much they can do about it because the phone is still fully functional even with the coating wearing off. I was told to buy a screen protector...
I'm not sure how I feel about this.
Well after about two years with my nexus 5 I finally got careless and dropped it without it being in my spigen case Glass shattered. The lcd and digitizer still work fine. I ordered a replacement screen that comes with the digitizer fused to it already as I've read its too much work to literally just replace the glass. I've watched a bunch of videos and I'm a tinkerer by nature and it looks rather simple. Anyone here successfully replaced their nexus 5 screen?
Sent from my Nexus 5 using xda premium
I've done both screen and digitizer plus frame, which is literally just switching internals, and I've also don't just the glass, its far easier to replace the screen and digitizer together, make sure u use a hot blow dryer and remove the battery and mother board before applying heat, if u need any further pointers let me know
Sent from my Nexus 6 using Tapatalk
Thanks man! I have a few different YouTube instructional videos saved that I'll be using as reference. I also have a heatgun so I'll be using that. I'll PM you if I run into trouble (hopefully I don't)!
Sent from my Nexus 5 using xda premium
It's really easy, u should be fine
Sent from my Nexus 6 using Tapatalk
I recently put 2 nexus 5's together to make a working one. Just had to swap all the internals over from one with a cracked screen to another with a water damaged motherboard. The whole process was pretty simple just unscrewing and swapping things over really. Mind you I didnt have to replace the frame, which I would say is probably the most difficult part of a screen replacement. If you have already done ur research, just go slow and dont force things too much everything should be sweet.
It's virtually impossible to separate the front glass, digitizer and LCD without destroying them. I've come close but have never been successfully. It's not worth the trouble.y suggestion is to buy a new fre as well. It's a pain to dig all the broken glass off the frame. I'd much rather pay an additional 7 dollars and save the time and avoid picking shardsof glass out of my fingers. A reused frame is rarely like new anyway. There are often issues with seating of the LCD and problems with the adhesive. The nexus 4 was really bad in this regard. I have one, it works and I managed to get the proximity sensor to work, but I'd never do it that way again.
I replaced the screen on my nexus 5 with a LCD that came in the frame. It turned out to be a good choice as my frame was actually broken. It cracked right by the buttons on both sides. I have a second ont thats broken the same way, except the lcd works well enough to use so im waiti g until it dies completely to fix it. The front glass was actually on, but the LCD cracked. It seemed odd that the LCD cracked but not the glass until I had it apart. (I bekwice the digitizer on these is part of the LCD, as opposed to being laminated on the back of the glass)
The replacement went very smooth. I did it on my mother in laws kitchen table. You will need a credit card (to get the battery off) a hair dryer (for the battery) and a small screw driver. Don't use the ones they usually send with the screen, they are bad quality and will chew screws and or break leaving you without a screwdriver in the middle of the repair. Google the d820 service manual and read the disassembly section. Work carefully with plenty of light and be very careful with the tiny connectors. There are some parts that are stuck down, for instance the battery. Heat them with a hair dryer. It's best to hold it in your hand when you do this. If you can hold it, the heats OK, if its to hot to hold, its too hot. Usea credit card to pry up the battery if your changing frames. Heat both the front and back until you can slide the card under the battery.
Thanks the insight guys. Really appreciate it. Times like these make me happy I'm apart of the nexus community lol. Unfortunately I did not buy a new frame so I'll be picking out glass for a while! I just ordered the part yesterday and paid extra for faster processing and shipping. Reviewed a few more videos and manuals today and feel pretty confident. I was going to dish out 500 for the new 6p, but I just don't feel like I'm done with my N5 yet. So hopefully this replacement gives me another 4-6 months with my phone before I finally decide to upgrade.
Sent from my Nexus 5 using xda premium
I replaced a screen on an n4 and n5. Replacing just the digitizer was such a pain on the n4 that I decided to get the frame, lcd, and digitizer pre-assembled for the n5. For me, it's worth it to get everything pre-assembled.
I just got my screen, LCD and digitizer yesterday. I'll be performing the swap today. Wish me luck!
Sent from my Nexus 5 using xda premium
Successful repair! I can't explain how nice it is to have a crystal clear screen again. So refreshing!
Sent from my Nexus 5 using xda premium
One of my clients just informed me that a crack on the top left of the touchscreen of his S7 Edge caused the entire touchscreen to be completely inoperable. The entire screen was flickering like crazy. BE WARNED. I have not heard of anything like this before. Touchscreens are usually usable even if the entire screen is cracked.
Sent from my iPhone using Tapatalk
Duh...
It all depends onthe way the phone falls. There are no proven examples that screen A will always survive because iti s only cracked a little and screen B will go dead at whatever conditions. Only probability and nothing else.
Lol sent from iphone.
Mines dropped and cracked on the back and a slight crack in the corner. touchscreen still works fine ... no worries tho my insurance phone will be here tomorrow yay ???
This is not an invite for personal stories of successful drops. I am bringing up a potential issue that people with this phone might not be fully aware of.
Sent from my iPhone using Tapatalk
wtf hahah .
oplix said:
This is not an invite for personal stories of successful drops. I am bringing up a potential issue that people with this phone might not be fully aware of.
Sent from my iPhone using Tapatalk
Click to expand...
Click to collapse
It's possible on any device. Like mentioned above, chances are that the way it dropped (force, speed, angle, etc) damaged the hardware and that the screen crack as nothing to do with it.
All in all, be careful gents, devices aren't indestructible
oplix said:
This is not an invite for personal stories of successful drops. I am bringing up a potential issue that people with this phone might not be fully aware of.
Sent from my iPhone using Tapatalk
Click to expand...
Click to collapse
So I guess the moral of the story is, don't drop the phone, Of course nobody ever plans on dropping their phone. But if you are trying to say that if you drop the phone then the screen may break, and if the screen breaks then the touchscreen may fail, that's not news to anyone.
mine drop, still got case on...still work fine....lol
Should be more careful.
I once dropped my s7 edge and only once and it stopped working completely. I'll remember next time I'm 30ft up to secure my phone better. Can't believe 1 drop and my phone won't power on geeez Samsung must be making low quality phones now.I BLAME SAMSUNG
Sent from my SM-G935F using XDA-Developers mobile app
Lol, not every single phone will be exactly the same, and the goes for any and all manufacturers of anything. My first S7 Edge I dropped like 5 times at waist height, a few lower, only a few cracks on the back glass and a few dents on metal edges. Not once did the front glass get scratched or dented thankfully. I ended up exchanging it for a new one since I had GSP and the MFG warranty. Granted I preordered mine and the way Best Buy had to do the GSP plans on those pre orders meant no matter what was wrong with my phone I didn't have to pay for a new one. Got an Otterbox Commuter case and my new ones been flawless I love Samsung. I've already swam with it in a 9 ft pool and no problems since. Granted like I said above, any company who makes anything, even electronics will unfortunately have some that can't take as much abuse since these things are mass produced.
what?
-_-
gotta be carefull than using this phone and don't forget to have an insurance for your phone.
i will be getting mine back from samsung tomorrow sent it in for mic not working when trying to talk on the phone but works ok on speaker phone or blue tooth
the report states they replace the lcd. to fix the mic not working here is a copy of it. also when the back cover was remove some how there was a crack on the back glass and camera glass they wrote it as abuse.WTF new back cover$70.00
Your product was shipped on 7/29/2016 at 5:55 PM EST.
Service Ticket Number: 4136883135
Ship Company: UPS
Tracking Number: 1ZE30
Serial number: 356164072690302
Please view additional information below for more details.
Original Problem:
CALL QUALITY /SOUND - SOUND PROBLEMS - MICROPHONE NOT WORKING
Problem found:
BACK COVER CRACKED - ABUSE - COSMETICS DAMAGE
Solution:
REPLACED COSMETIC - REPLACED LCD
oplix said:
This is not an invite for personal stories of successful drops. I am bringing up a potential issue that people with this phone might not be fully aware of.
Sent from my iPhone using Tapatalk
Click to expand...
Click to collapse
My phone slid off a table that was maybe 4 ft high and caught one of the stabilizing bars (that connect table legs) on the way down. Entire screen cracked, mad flickering.
This is a very delicate phone. I have dropped smartphones before (without a case) and this is the first one in my history (starting with the original iPhone!) that got any serious damage from a fall. The other three people I know who own an S7e all cracked theirs in the first 3-4 months too. A case is a definite must.
As someone that works in this field, I lol'd. Its usable if you didnt crack the LCD or Digitizer. For simplicity sake lets say there are three layers, the glass your finger touch, the digitizer right under it, then the LCD. You crack either of the bottom 2 layers, you got a non-working phone. You crack the top glass, put something like tape or tempered glass over it, it'll work just fine.
me 2.. I will pay around 300 euro.
Your phone drop dead,?
You guys are also talking about dropping glass phones. Sure it's technically a plastic glass composite material, but they will crack with enough force. Like I said above, I dropped my first one like 5 times without a case and only got a few cracks on the back glass, the front has hit the ground at waist height several times and it never cracked which really surprised me that the back cracked but not the front. I definitely would get a case. The Otterbox Commuter case is really nice because it's tough but still slim enough for easy entry and removal of your pocket. And yes insurance plans like Best Buy's GSP is definitely a must for this price point.
Same happened to mine, a couple of low drops (1 bounce) with no external damage.
The display turned green and eventually died.
From the way the support centre answered, it seems that they have high numbers of this problem.